This document provides a material safety data sheet for Resist 86 AV - Comp. B, which contains zinc powder and zinc oxide. It is considered hazardous and may cause target organ damage based on animal data. Exposure can cause eye, skin, or respiratory irritation. Inhalation of dusts or fumes can potentially damage lungs or the upper respiratory tract over time. The product contains 50-100% zinc and 2.5-10% zinc oxide and is very toxic to aquatic life with potential long term effects in aquatic environments. Proper personal protective equipment should be used when handling.
The Jet-A Fuel Data Safety Sheet, Let us know about the safety measures you should take while using this fuel. Tribute Aviation is a wholesaler of Jet-A fuels in Arizona, California, Washington, Utah, Virginia and other places. Contact us for personalized customer service.
The Jet-A Fuel Data Safety Sheet, Let us know about the safety measures you should take while using this fuel. Tribute Aviation is a wholesaler of Jet-A fuels in Arizona, California, Washington, Utah, Virginia and other places. Contact us for personalized customer service.
MSDS is a document that contains information on the potential health effects of exposure to chemicals, or other potentially dangerous substances, and on safe working procedures when handling chemical products
Optical brightener er i 13001-39-3 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Material Safety Data Sheet (MSDS) for Dermasome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Res. The Dermasome-Res formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing resveratrol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
zimmer aufraumen hard surface cleaner concentrate SDS by ZAglobal Canada Regulatory Desk, for US canada.
This contains safety data sheet for Zimmer Aufraumen (Zaglobal) products
Pigment yellow 138 cas 30125 47-4 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
MSDS is a document that contains information on the potential health effects of exposure to chemicals, or other potentially dangerous substances, and on safe working procedures when handling chemical products
Optical brightener er i 13001-39-3 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Material Safety Data Sheet (MSDS) for Dermasome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Res. The Dermasome-Res formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing resveratrol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
zimmer aufraumen hard surface cleaner concentrate SDS by ZAglobal Canada Regulatory Desk, for US canada.
This contains safety data sheet for Zimmer Aufraumen (Zaglobal) products
Pigment yellow 138 cas 30125 47-4 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Material Safety Data Sheet (MSDS) for Cosmesome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Ubq. The Cosmesome-Ubq formulation is composed of saturated phospholipids that form interdigitated lipids containing CoQ10 in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers
Material Safety Data Sheet (MSDS) for Dermasome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Ubq. The Dermasome-Ubq formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing CoQ10 upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Uv 531 chimassorb 81 cas 1843 05-6 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Material Safety Data Sheet (MSDS) for Cosmesome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Chol. The Cosmesome-Chol formulation is composed of saturated phospholipids that form interdigitated lipids containing cholesterol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Chlorinated paraffin (CP) is a complicated chemical that has a wide range of uses in a variety of industries. It is frequently used in rubber, paints, adhesives, caulks, sealants, and plastics as a secondary plasticizer and flame retardant. Another application is as a lubricant or coolant in the cutting or shaping of metal.
Elchemy is trusted chlorinated paraffin supplier, and exporter, offering high-quality and innovative chemical products to a wide range of industries. For more details, visit our website now!
https://www.elchemy.com/
Material Safety Data Sheet (MSDS) for Dermasome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Chol. The Dermasome-Chol formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Res. The Cosmesome-Res formulation is composed of saturated phospholipids that form interdigitated lipids containing resveratrol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
The starch obtained from corn grain is also known as maize starch or cornflour. The kernel's endosperm is where the starch is found. A common food ingredient, maize starch is used to manufacture corn syrup and other sugars, as well as to thicken sauces and soups.
Elchemy is the leading corn starch supplier, and exporter, offering high-quality and innovative chemical products to a wide range of industries. For more details, visit our website now!
https://www.elchemy.com/
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Sds resist 86 av - comp. b - marine protective - english (us) - united states
1. Material Safety Data Sheet
Resist 86 AV - Comp. B
1.
Product and company identification
Resist 86 AV - Comp. B
MM00001154
Coatings: Zinc. Powder.
Jotun Paints, Inc.
9203 Highway 23
Belle Chasse, LA 70037
Telephone: (800) 229-3538 or
(504) 394-3538
SDSJotun@jotun.no
Trade name
Code
Material uses
Manufacturer
:
:
:
:
In case of emergency
: 1-800-424-9300
2.
Hazards identification
Physical state
Odor
OSHA/HCS status
Eyes
Skin
Inhalation
Ingestion
Potential chronic health
effects
Medical conditions
aggravated by overexposure
: Solid. [Powder.]
: Characteristic.
: This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
CONTAINS MATERIAL THAT MAY CAUSE TARGET ORGAN DAMAGE, BASED ON
ANIMAL DATA.
Contains material that may cause target organ damage, based on animal data.
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
: CARCINOGENIC EFFECTS: Classified A4 (Not classifiable for humans or animals.) by
ACGIH [zinc oxide].
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
: Pre-existing disorders involving any target organs mentioned in this MSDS as being at
risk may be aggravated by over-exposure to this product.
See toxicological information (section 11)
3.
Composition/information on ingredients
Name
CAS number
% by weight
zinc
7440-66-6
50 - 100
zinc oxide
1314-13-2
2.5 - 10
Components not listed are not physical or health hazards as defined in 29 CFR 1910.1200 (Hazard Communication
Standard).
Section 4. First aid measures
Eye contact
: Check for and remove any contact lenses. Immediately flush eyes with plenty of
water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get
medical attention immediately.
Skin contact
: In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse.
Clean shoes thoroughly before reuse. Get medical attention immediately.
Inhalation
: Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
Ingestion
: Wash out mouth with water. Do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious person. Get
medical attention immediately.
Continued on next page
2. Page: 2/7
Resist 86 AV - Comp. B
Section 4. First aid measures
Protection of first-aiders
5.
: No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Fire-fighting measures
Flammability of the product
Products of combustion
Suitable
Not suitable
Special exposure hazards
Special protective
equipment for fire-fighters
: Non-flammable.
: Decomposition products may include the following materials:
metal oxide/oxides
: Use an extinguishing agent suitable for the surrounding fire.
: None known.
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Fire water contaminated with this material must be contained and prevented
from being discharged to any waterway, sewer or drain.
No specific fire or explosion hazard.
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Section 6. Accidental release measures
Personal precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Provide adequate
ventilation. Wear appropriate respirator when ventilation is inadequate. Put on
appropriate personal protective equipment (see section 8).
Environmental precautions
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities.
Methods for cleaning up
: Move containers from spill area. Approach release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Vacuum or sweep up material
and place in a designated, labeled waste container. Dispose of via a licensed waste
disposal contractor. Note: see section 1 for emergency contact information and
section 13 for waste disposal.
Section 7. Handling and storage
Handling
: Put on appropriate personal protective equipment (see section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Do not ingest. Avoid contact with eyes, skin and clothing. Avoid release
to the environment. Keep in the original container or an approved alternative made
from a compatible material, kept tightly closed when not in use. Empty containers
retain product residue and can be hazardous. Do not reuse container.
Storage
: Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials (see section 10) and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.
8.
Exposure controls/personal protection
Product name
zinc oxide
Continued on next page
Exposure limits
NIOSH REL (United States, 6/2008).
CEIL: 15 mg/m³ Form: Dust
TWA: 5 mg/m³ 10 hour(s). Form: Dust and fumes
STEL: 10 mg/m³ 15 minute(s). Form: Fume
OSHA PEL (United States, 11/2006).
TWA: 5 mg/m³ 8 hour(s). Form: Fume
TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction
TWA: 15 mg/m³ 8 hour(s). Form: Total dust
OSHA PEL 1989 (United States, 3/1989).
3. Page: 3/7
Resist 86 AV - Comp. B
8.
Exposure controls/personal protection
STEL: 10 mg/m³ 15 minute(s). Form: Fume
TWA: 5 mg/m³ 8 hour(s). Form: Fume
TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction
TWA: 10 mg/m³ 8 hour(s). Form: Total dust
ACGIH TLV (United States, 1/2009).
STEL: 10 mg/m³ 15 minute(s).
TWA: 2 mg/m³ 8 hour(s).
Engineering measures
: No special ventilation requirements. Good general ventilation should be sufficient to
control worker exposure to airborne contaminants. If this product contains ingredients
with exposure limits, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any recommended or statutory
limits.
Eyes
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Skin
: Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Respiratory
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Hands
: Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Hygiene measures
9.
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
Physical and chemical properties
Physical state
Color
Odor
Relative density
VOC
Solubility
:
:
:
:
:
:
Solid. [Powder.]
Various colors.
Characteristic.
7.1 g/cm3
59.24 pounds/gallon
0 % (w/w)
Insoluble in the following materials: cold water and hot water.
Section 10. Stability and reactivity
Stability and reactivity
Hazardous decomposition
products
Hazardous polymerization
: The product is stable.
: Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
: Under normal conditions of storage and use, hazardous polymerization will not
occur.
Section 11. Toxicological information
Chronic effects on humans
Continued on next page
: CARCINOGENIC EFFECTS: Classified A4 (Not classifiable for humans or animals.)
by ACGIH [zinc oxide].
Contains material which may cause damage to the following organs: lungs, upper
respiratory tract, skin.
4. Page: 4/7
Resist 86 AV - Comp. B
Section 11. Toxicological information
Other toxic effects on
humans
Specific effects
Carcinogenic effects
Mutagenic effects
Reproduction toxicity
Chronic effects
Target organs
: Exposure to component solvent vapor concentrations in excess of the stated
occupational exposure limit may result in adverse health effects such as mucous
membrane and respiratory system irritation and adverse effects on the kidneys, liver
and central nervous system. Solvents may cause some of the above effects by
absorption through the skin. Symptoms and signs include headache, dizziness,
fatigue, muscular weakness, drowsiness and, in extreme cases, loss of
consciousness. Repeated or prolonged contact with the preparation may cause
removal of natural fat from the skin, resulting in non-allergic contact dermatitis and
absorption through the skin. If splashed in the eyes, the liquid may cause irritation
and reversible damage. Swallowing may cause nausea, diarrhea, vomiting, gastrointestinal irritation and chemical pneumonia.
:
:
:
:
:
No known significant effects or critical hazards.
No known significant effects or critical hazards.
No known significant effects or critical hazards.
Contains material that may cause target organ damage, based on animal data.
Contains material which may cause damage to the following organs: lungs, upper
respiratory tract, skin.
12 . Ecological information
Ecotoxicity data
Product/ingredient name
zinc
zinc oxide
Species
Daphnia magna (EC50)
Pimephales promelas (LC50)
Oncorhynchus mykiss (LC50)
Oncorhynchus mykiss (LC50)
Oncorhynchus mykiss (LC50)
Daphnia magna (LC50)
Daphnia magna (EC50)
Oncorhynchus mykiss (LC50)
Lepomis macrochirus (LC50)
Pimephales promelas (LC50)
Period
48 hour(s)
96 hour(s)
96 hour(s)
96 hour(s)
96 hour(s)
96 hour(s)
48 hour(s)
96 hour(s)
96 hour(s)
96 hour(s)
Result
2.8 mg/l
0.238 mg/l
0.24 mg/l
0.41 mg/l
0.56 mg/l
0.57 mg/l
>1000 mg/l
1.1 mg/l
>320 mg/l
2246 mg/l
Environmental precautions
: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment. Water polluting material. May be harmful to the environment if released in
large quantities.
Products of degradation
: Some metallic oxides.
13 . Disposal considerations
Waste disposal
: The generation of waste should be avoided or minimized wherever possible. Empty
containers or liners may retain some product residues. This material and its container
must be disposed of in a safe way. Dispose of surplus and non-recyclable products via
a licensed waste disposal contractor. Disposal of this product, solutions and any byproducts should at all times comply with the requirements of environmental protection
and waste disposal legislation and any regional local authority requirements. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.
Disposal should be in accordance with applicable regional, national and local laws and regulations. Local
regulations may be more stringent than regional or national requirements.
The information presented below only applies to the material as supplied. The identification based on
characteristic(s) or listing may not apply if the material has been used or otherwise contaminated. It is the
responsibility of the waste generator to determine the toxicity and physical properties of the material generated to
determine the proper waste identification and disposal methods in compliance with applicable regulations.
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
for additional handling information and protection of employees.
Continued on next page
5. Page: 5/7
Resist 86 AV - Comp. B
Section 14. Transport information
Regulatory
information
UN number
Proper shipping
name
Class
PG* Label
Additional
information
DOT Classification
3077
Environmentally
hazardous
substance, solid,
n.o.s. (zinc, zinc
oxide)
9
III
-
TDG Classification
3077
Environmentally
hazardous
substance, solid,
n.o.s. (zinc, zinc
oxide)
9
III
-
ADR/RID Class
3077
Environmentally
hazardous
substance, solid,
n.o.s. (zinc, zinc
oxide)
9
III
Tunnel restriction
code: (E)
IMDG Class
3077
Environmentally
hazardous
substance, solid,
n.o.s. (zinc, zinc
oxide). Marine
pollutant (zinc, zinc
oxide)
9
III
Marine pollutant: Yes.
IATA-DGR Class
3077
Environmentally
hazardous
substance, solid,
n.o.s. (zinc, zinc
oxide)
9
III
-
PG* : Packing group
These zinc types have been tested according to the criteria for classes 4.1, 4.2 and 4.3. The testresults shows that these types do not
meet the criterias for classifying in class 4.1, 4.2, 4.3 : BAM, 2005 Report II.2-916/04.
15 . Regulatory information
HCS Classification
U.S. Federal regulations
: Target organ effects
: TSCA 6 proposed risk management: lead
United States inventory (TSCA 8b): Not determined.
TSCA 8(d) H and S data reporting: lead: 2008
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: zinc; zinc oxide
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: zinc:
Fire hazard, Immediate (acute) health hazard, Delayed (chronic) health hazard; zinc
oxide: Immediate (acute) health hazard, Delayed (chronic) health hazard
Clean Water Act (CWA) 307: lead; cadmium; zinc; zinc oxide
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Continued on next page
6. Page: 6/7
Resist 86 AV - Comp. B
15 . Regulatory information
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
SARA 313
Form R - Reporting
requirements
Product name
: zinc
zinc oxide
CAS number
7440-66-6
1314-13-2
Concentration
50 - 100
2.5 - 10
7440-66-6
50 - 100
: zinc
zinc oxide
1314-13-2
2.5 - 10
SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall
include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.
Supplier notification
State regulations
: Connecticut Carcinogen Reporting: None of the components are listed.
Connecticut Hazardous Material Survey: None of the components are listed.
Florida substances: None of the components are listed.
Illinois Chemical Safety Act: None of the components are listed.
Illinois Toxic Substances Disclosure to Employee Act: None of the components are
listed.
Louisiana Reporting: None of the components are listed.
Louisiana Spill: None of the components are listed.
Massachusetts Spill: None of the components are listed.
Massachusetts Substances: The following components are listed: ZINC OXIDE FUME;
ZINC
Michigan Critical Material: None of the components are listed.
Minnesota Hazardous Substances: None of the components are listed.
New Jersey Hazardous Substances: The following components are listed: ZINC
OXIDE; ZINC (DUST AND FUME)
New Jersey Spill: None of the components are listed.
New Jersey Toxic Catastrophe Prevention Act: None of the components are listed.
New York Acutely Hazardous Substances: The following components are listed: Zinc
New York Toxic Chemical Release Reporting: None of the components are listed.
Pennsylvania RTK Hazardous Substances: The following components are listed:
ZINC OXIDE (ZNO); ZINC
Rhode Island Hazardous Substances: None of the components are listed.
WARNING: This product contains less than 0.1% of a chemical known to the State of
California to cause cancer.
WARNING: This product contains less than 1% of a chemical known to the State of
California to cause birth defects or other reproductive harm.
Ingredient name
Cancer
Reproductive
lead
cadmium
Yes.
Yes.
Yes.
Yes.
No significant risk
level
Maximum
acceptable dosage
level
15 μg/day (ingestion) Yes.
0.05 μg/day
Yes.
(inhalation)
EU regulations
Hazard symbol or symbols :
Dangerous for the
environment
Risk phrases
Safety phrases
Continued on next page
: R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
: S61- Avoid release to the environment. Refer to special instructions/safety data sheet.
7. Page: 7/7
Resist 86 AV - Comp. B
16 . Other information
Label requirements
Hazardous Material
Information System (U.S.A.)
: CONTAINS MATERIAL THAT MAY CAUSE TARGET ORGAN DAMAGE, BASED ON
ANIMAL DATA.
1
:
Health
2
Physical hazards
1
PERSONAL PROTECTION
National Fire Protection
Association (U.S.A.)
Flammability
A
:
Flammability
0
Health
0
0
Instability
Special
: 11.02.2010.
Date of issue
Version
: 1.01
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Indicates information that has changed from previously issued version.