3. Saw
S-300
Maximum cutting height 300 mm with blade Ø 900 mm
Blade motor 45 kW
Manual operation
Water tank capacity 1000 l with level gauge
Blade Ø ranging 900 mm
6. Saw
CR-900
Maximum cutting height 300 mm
Able to cut with blades Ø 700, 800 or 900 mm
(only by adjusting the stops)
Blade motor power 45 kW
Option for programmed cuts (as an option)
Enrollers for the electric cable and water hose (as an option)
Minimum maintenance
Blade Ø ranging 900 mm
9. Saw
CR-1300
Maximum cutting height 500 mm
Able to cut with blades Ø 1.300 mm
Blade motor power 45 kW
Option for programmed cuts (as an option)
Enrollers for the electric cable and water hose (as an option)
Minimum maintenance
Blade Ø ranging 1.300 mm
12. Angle saw
TLA 70º
Blade Ø ranging 900 mm
Maximum cutting height 300 mm with blade Ø 900 mm
45º cuts in one cycle, from 45º to 70º in two cycles
Blade motor 45 kW
Longitudinal cuts
Semiautomatic operation
16. Angle saw
CF-1300
Maximum cutting height 500 mm.
Available for higher depths
Blade Ø ranging from 800 to 1300 mm
Automatic and programmable control panel
Touch data screen with various programmes to
carry out different cutting cycles.
Enrollers for the electric cable and water hose
Water tank with pressure unit
Blade motor 55 kW
Telescopic guard for cutting blade, with automatic
positioning system
Optional slurry cleaning system
Blade Ø ranging
from 800 to 1300 mm