This document is a resume for Muhammad Saeed Aslam seeking a position as an Instruments and Control Supervisor. It outlines his educational qualifications including a degree in Instrument Technology. It details his over 13 years of experience in instrumentation maintenance, calibration, and process control. It also lists the various control systems, instruments, and field devices he has worked with. The resume emphasizes his skills in loop checking, commissioning, shutdown work, and quality assurance procedures.
Mohammad Yousuf Ahmed N is seeking a position as a Project Engineer where he can utilize his educational and technical skills in process instrumentation and control. He has over 20 years of experience in instrumentation construction, pre-commissioning, and commissioning. Some of his responsibilities have included installing, testing, and calibrating various field instruments; loop checking instrumentation from DCS; and ensuring quality control. He is proficient in instrumentation standards and has experience programming PLCs and working with DCS, SCADA, and fire and gas systems.
This document provides a summary of Mohammad Asif Hussain's qualifications and experience applying for an Instrument Supervisor position. He has 14 years of experience in instrumentation roles abroad. His technical qualifications include a 3-year diploma in instrumentation engineering. He has worked on numerous oil and gas projects in various instrumentation supervisor roles. His responsibilities have included supervision of instrumentation installation, calibration, commissioning, and maintenance. He has experience working with common instrumentation and control systems.
The document is a curriculum vitae for Sathish Kumar that summarizes his educational and professional background. It includes details about his bachelor's degree in electronic and instrumentation engineering, relevant skills like familiarity with quality management systems, and work experience in roles like instrumentation commissioning engineer and QA/QC instrumentation engineer on projects in Singapore, Angola, and Qatar. His technical knowledge covers areas such as electrical works, instrumentation and communication systems, and computer literacy.
Muthu Pandi is an electrical and instrumentation professional with 9 years of experience in maintenance, commissioning, and projects in the chemical, petrochemical, oil, and gas industries. He is currently pursuing a diploma in electrical engineering and working as an instrument and electrical technician at Pesko Engineering in Singapore. His responsibilities include maintenance, troubleshooting, calibration, and commissioning of various field instruments, control valves, and electrical equipment. He has experience working with many instrumentation manufacturers and has participated in several plant turnaround and maintenance projects.
This document describes the services and products offered by Classic Controls, Inc. for control systems, instrumentation, mechanical equipment, and related services in Puerto Rico. They represent major brands and provide design, installation, calibration, maintenance and repair. Their offerings include DCS/PLC systems, sensors, recorders, analyzers, valves, filtration equipment, and more. They have factory-trained engineers and technicians to support customers.
This document is a curriculum vitae for Chandrabhushanrao, an instrumentation technician with over 14 years of experience in maintenance, commissioning, and pre-commissioning projects. It lists his contact information, objective of seeking a senior instrumentation position, safety and technical training qualifications, and employment history working on various oil, gas and petrochemical projects in locations like the UAE, Iraq, Kazakhstan, Qatar, and India. It also provides an experience profile detailing his responsibilities and skills related to instrumentation systems, calibration, loop checking, commissioning, and handling a variety of test equipment.
This document describes various gas monitoring and analysis products offered by HNL Systems. It includes pocket gas monitors, portable gas monitors, personal gas monitors, multi-gas monitors, SF6 leak detectors, field mounted monitors, single/multi-gas alarm systems, fixed gas monitors, portable gas analyzers, handheld gas analyzers, moisture/dew point analyzers, particulate and dust emission monitoring systems, air quality stations, ambient air analyzers and portable air quality monitors. The monitors and analyzers can detect various gases and provide measurements for industrial and environmental applications.
Mohammad Yousuf Ahmed N is seeking a position as a Project Engineer where he can utilize his educational and technical skills in process instrumentation and control. He has over 20 years of experience in instrumentation construction, pre-commissioning, and commissioning. Some of his responsibilities have included installing, testing, and calibrating various field instruments; loop checking instrumentation from DCS; and ensuring quality control. He is proficient in instrumentation standards and has experience programming PLCs and working with DCS, SCADA, and fire and gas systems.
This document provides a summary of Mohammad Asif Hussain's qualifications and experience applying for an Instrument Supervisor position. He has 14 years of experience in instrumentation roles abroad. His technical qualifications include a 3-year diploma in instrumentation engineering. He has worked on numerous oil and gas projects in various instrumentation supervisor roles. His responsibilities have included supervision of instrumentation installation, calibration, commissioning, and maintenance. He has experience working with common instrumentation and control systems.
The document is a curriculum vitae for Sathish Kumar that summarizes his educational and professional background. It includes details about his bachelor's degree in electronic and instrumentation engineering, relevant skills like familiarity with quality management systems, and work experience in roles like instrumentation commissioning engineer and QA/QC instrumentation engineer on projects in Singapore, Angola, and Qatar. His technical knowledge covers areas such as electrical works, instrumentation and communication systems, and computer literacy.
Muthu Pandi is an electrical and instrumentation professional with 9 years of experience in maintenance, commissioning, and projects in the chemical, petrochemical, oil, and gas industries. He is currently pursuing a diploma in electrical engineering and working as an instrument and electrical technician at Pesko Engineering in Singapore. His responsibilities include maintenance, troubleshooting, calibration, and commissioning of various field instruments, control valves, and electrical equipment. He has experience working with many instrumentation manufacturers and has participated in several plant turnaround and maintenance projects.
This document describes the services and products offered by Classic Controls, Inc. for control systems, instrumentation, mechanical equipment, and related services in Puerto Rico. They represent major brands and provide design, installation, calibration, maintenance and repair. Their offerings include DCS/PLC systems, sensors, recorders, analyzers, valves, filtration equipment, and more. They have factory-trained engineers and technicians to support customers.
This document is a curriculum vitae for Chandrabhushanrao, an instrumentation technician with over 14 years of experience in maintenance, commissioning, and pre-commissioning projects. It lists his contact information, objective of seeking a senior instrumentation position, safety and technical training qualifications, and employment history working on various oil, gas and petrochemical projects in locations like the UAE, Iraq, Kazakhstan, Qatar, and India. It also provides an experience profile detailing his responsibilities and skills related to instrumentation systems, calibration, loop checking, commissioning, and handling a variety of test equipment.
This document describes various gas monitoring and analysis products offered by HNL Systems. It includes pocket gas monitors, portable gas monitors, personal gas monitors, multi-gas monitors, SF6 leak detectors, field mounted monitors, single/multi-gas alarm systems, fixed gas monitors, portable gas analyzers, handheld gas analyzers, moisture/dew point analyzers, particulate and dust emission monitoring systems, air quality stations, ambient air analyzers and portable air quality monitors. The monitors and analyzers can detect various gases and provide measurements for industrial and environmental applications.
This resume summarizes the qualifications and experience of Angel V. Vacaro Jr. as an industrial, electrical, electronics, and instrumentation technician. Over 30 years of experience includes roles in installation, commissioning, calibration, and maintenance across various industries and countries. He has extensive skills in electrical wiring, control systems, automation, and troubleshooting various equipment and machinery.
Photon Instruments provides calibration services and sells analytical instruments and equipment. They invite experienced people to join as direct business partners or part-time partners with no capital investment. Their services include calibration of humidity, temperature, dew point, pressure, non-contact temperature, light, RPM, and air velocity. They have an ISO-certified 1500 square foot laboratory facility and offer on-site calibration services.
This document is a curriculum vitae for Satishkumar Thakorbhai Patel applying for the position of Instrument Supervisor. It summarizes his educational background including passing exams in science and completing instrumentation technician training. It details his 23 years of experience in oil and gas fields working for multiple companies in various roles and locations. It highlights his technical skills and safety qualifications.
Sifam Tinsley Instrumentation Inc - Company Presentation - 05/25Sifam Tinsley
Sifam Tinsley Instrumentation Inc. is a Georgia-registered corporation and part of a global group with manufacturing operations in Asia and Europe. The company engineers and manufactures products for energy measurement and automation, including multifunction meters, digital panel meters, transducers, current transformers, digital multimeters, insulation testers, temperature controllers, and more. It has research and development, manufacturing, and quality control facilities across Asia, Europe, and the United States. The company's vision is to achieve continuous growth through innovation and technological advancement in energy measurement and automation.
Presentation on Prospect of Non Destructive Testing and Condition Monitoring...Ferdous Kabir
Predictive Maintenance (PdM) , PdM techniques are designed to help to determine the condition of in-service equipment in order to predict when maintenance should be performed.
Executive our PDM program, we consider following Non Destructive Testing and Condition Monitoring technique:
Ultrasonic Thickness Gauging (w/wo coating)
Conventional Ultrasonic Testing
Phased Array Ultrasonic Testing
Time and Flight Diffraction(TOFD)
Radiography Testing
Video-Borescopic Inspection/Endoscopic Inspection
Eddy Current Testing
Magnetic Particle Testing
Dye Penetrate Testing
Hardness Testing
Pre and Post Weld Heat Treatment
Vacuum Test
Vibration Analysis (vibration/field balancing)
Thermography
Lube Oil Analysis (Viscosity ,Oxidation, Nitration, Sulfating, Incorrect lubricant, Wear additives, Soot, Glycol, Water, FAME)
SIKA is a family-owned German company with over 340 employees that has been developing and producing precision measurement and calibration equipment for over 100 years. They produce a wide range of industrial thermometers, pressure gauges, temperature and pressure sensors, flow meters, and calibration devices. SIKA ensures quality by calibrating products in their own accredited lab and providing expert support to customers worldwide through regional subsidiaries and partners.
M/s Photon Instruments is inviting experienced people to join as direct business partners or part-time business partners with zero capital investment. They offer sales and services for instruments including calibration services, validation services, and thermography services. They also operate a training center for industries and colleges. Photon Instruments sells and services multi-brand portable and online instruments.
The document summarizes Everest Automation Inc., a provider of instrumentation and control products and services in Eastern Canada. It outlines their full product offering across valves, field instrumentation, control products, analytical products and integrated solutions. It also provides their mission to provide the highest quality automation products and services with strong technical support.
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Super-Thermometer. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke 1594A. Datasheet Fluke 1595A. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Cox Precision metering products by Badger Meter provide flow measurement solutions for the test and measurement market and precision industrial applications.
The document lists numerous standards and protocols from various organizations that relate to instrumentation and process control. It covers standards from SABS, API, ASME, ANSI, NF, CFR, ASTM, FCI, ISA, IEEE, EIA, EN, NEMA, NFPA, BS, IEC, ISO, and NACE. The quality assurance section specifies that test certification must come from organizations such as UL, FM, SABS, CSA, or BASEEFA.
This document provides information on various level, flow, and grain monitoring devices from FineTek Co., Ltd. It includes brief descriptions of several product series for applications such as grain temperature monitoring, level measurement, flow measurement, data transmission, and wireless monitoring. Device options include different output types, materials, approvals, and accessories to suit a range of industrial needs. Product categories include level switches, level transmitters, flow meters, displays, and wireless monitoring systems.
This document describes Friends Reliance Group, a professional engineering company that provides industrial solutions and services. It offers products and solutions related to instrumentation and controls, electrical systems, condition monitoring, non-destructive testing, and analytical measurement. The company aims to deliver high quality and timely solutions to meet customer expectations. It provides services including project management, automation systems, and monitoring systems for various industrial sectors.
Scalable NDT Instruments for the Inspection of Variable Geometry ComponentsOlympus IMS
For the past several years, the aviation industry has seen above normal growth due, in part, to lower oil prices, saving major aircraft operators millions of dollars. As a result of this outstanding growth, production rates for new airplanes have increased and new aircraft programs are being launched. Consequently, aviation component manufacturers are facing new challenges including a rise in production rates, a high probability of detection (POD) due to the critical nature of the parts being manufactured, lack of skilled operators, and parts with increasingly complex geometry.
Ultrasonic phased array (PA) instruments have evolved, enabling an increase in inspection speeds and the implementation of advanced acquisition strategies. The introduction of scalable instruments and advanced acquisition strategies helps manufacturers address the inspection challenges they are facing. Scalability can now be used for nondestructive testing (NDT), enabling system integrators and manufacturers to improve the performance of their solutions by using multiple instruments in parallel. The evolution of electronic components enables advanced acquisition strategies, such as adaptive ultrasound, to be implemented. Adaptive ultrasound simplifies the inspection of complex components and improves the POD by using innovative signal-processing algorithms.
This paper presents an overview of scalable NDT instruments with the goal of helping NDT integrators and manufacturers to address the challenges they are facing in terms of system performance, production output, and quality control.
Datasheet Fluke 5502A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
The 5502A Multi-Product Calibrator is a robust and transportable calibrator that can calibrate a wide variety of electrical test equipment. It has protection circuits to prevent damage from operator errors and ergonomic handles for easy transport. The 5502A can calibrate DMMs up to 4.5 digits, current clamps, panel meters, thermometers, chart recorders, and more. It can be automated with calibration software for efficient calibration.
Mohammad Mintu is applying for the position of Instrument Supervisor and has over 14 years of experience in instrumentation for oil and gas projects in India and abroad. He provides his contact information, education qualifications including a diploma in instrumentation engineering, and describes his extensive experience in construction, commissioning, and maintenance of instrumentation systems. Mintu is looking to establish himself in an esteemed organization and utilize his skills and experience.
This document is a curriculum vitae submitted by M. Antonyraj for the position of instrument technician. It outlines his 9 years of experience in instrument maintenance, calibration, and repair work in India and abroad in Qatar and Oman. It also lists his educational qualifications which include a diploma in electronics and communication engineering, safety certifications, and descriptions of the types of instrumentation he has worked with, including transmitters, control valves, fire and gas detection systems.
Sagar Ennam is seeking a position as an analyzer and instrumentation technician with over 5 years of experience calibrating, testing, and maintaining various process and analytical instruments. He has worked on gas chromatography, cloud point analyzers, TOC analyzers, pH and conductivity instruments, oxygen analyzers, moisture analyzers, and gas detectors. Sagar also has experience installing, commissioning, and testing process instrumentation including pressure, temperature, level, and flow transmitters, control valves, and sensors. He is proficient in DCS and PLC systems and has participated in several plant startups and commissioning activities. Sagar holds a BTech in electrical engineering and a diploma in electronics and instrumentation engineering.
Jeyaraj Selvaraj has over 17 years of experience in electrical and instrumentation inspection, testing, and commissioning for oil, gas, and petrochemical projects. He has worked on projects in Kuwait and Saudi Arabia for companies like Chevron, KOC, SABIC, and SATORP. His experience includes material inspection, installation inspection, factory acceptance testing, site testing, pre-commissioning, and ensuring compliance with quality standards. He is seeking a senior position in project management or inspection.
This document provides a summary of S Raja's qualifications and experience as an instrumentation engineer. It includes details about his 9 years of experience in instrumentation projects for oil, gas and utility companies. It also lists his areas of expertise, such as maintenance, commissioning, automation, and handling a variety of instrumentation equipment. His core competencies include working with DCS, PLC, SCADA and safety systems from manufacturers like Yokogawa, ABB and Siemens.
This resume summarizes the qualifications and experience of Angel V. Vacaro Jr. as an industrial, electrical, electronics, and instrumentation technician. Over 30 years of experience includes roles in installation, commissioning, calibration, and maintenance across various industries and countries. He has extensive skills in electrical wiring, control systems, automation, and troubleshooting various equipment and machinery.
Photon Instruments provides calibration services and sells analytical instruments and equipment. They invite experienced people to join as direct business partners or part-time partners with no capital investment. Their services include calibration of humidity, temperature, dew point, pressure, non-contact temperature, light, RPM, and air velocity. They have an ISO-certified 1500 square foot laboratory facility and offer on-site calibration services.
This document is a curriculum vitae for Satishkumar Thakorbhai Patel applying for the position of Instrument Supervisor. It summarizes his educational background including passing exams in science and completing instrumentation technician training. It details his 23 years of experience in oil and gas fields working for multiple companies in various roles and locations. It highlights his technical skills and safety qualifications.
Sifam Tinsley Instrumentation Inc - Company Presentation - 05/25Sifam Tinsley
Sifam Tinsley Instrumentation Inc. is a Georgia-registered corporation and part of a global group with manufacturing operations in Asia and Europe. The company engineers and manufactures products for energy measurement and automation, including multifunction meters, digital panel meters, transducers, current transformers, digital multimeters, insulation testers, temperature controllers, and more. It has research and development, manufacturing, and quality control facilities across Asia, Europe, and the United States. The company's vision is to achieve continuous growth through innovation and technological advancement in energy measurement and automation.
Presentation on Prospect of Non Destructive Testing and Condition Monitoring...Ferdous Kabir
Predictive Maintenance (PdM) , PdM techniques are designed to help to determine the condition of in-service equipment in order to predict when maintenance should be performed.
Executive our PDM program, we consider following Non Destructive Testing and Condition Monitoring technique:
Ultrasonic Thickness Gauging (w/wo coating)
Conventional Ultrasonic Testing
Phased Array Ultrasonic Testing
Time and Flight Diffraction(TOFD)
Radiography Testing
Video-Borescopic Inspection/Endoscopic Inspection
Eddy Current Testing
Magnetic Particle Testing
Dye Penetrate Testing
Hardness Testing
Pre and Post Weld Heat Treatment
Vacuum Test
Vibration Analysis (vibration/field balancing)
Thermography
Lube Oil Analysis (Viscosity ,Oxidation, Nitration, Sulfating, Incorrect lubricant, Wear additives, Soot, Glycol, Water, FAME)
SIKA is a family-owned German company with over 340 employees that has been developing and producing precision measurement and calibration equipment for over 100 years. They produce a wide range of industrial thermometers, pressure gauges, temperature and pressure sensors, flow meters, and calibration devices. SIKA ensures quality by calibrating products in their own accredited lab and providing expert support to customers worldwide through regional subsidiaries and partners.
M/s Photon Instruments is inviting experienced people to join as direct business partners or part-time business partners with zero capital investment. They offer sales and services for instruments including calibration services, validation services, and thermography services. They also operate a training center for industries and colleges. Photon Instruments sells and services multi-brand portable and online instruments.
The document summarizes Everest Automation Inc., a provider of instrumentation and control products and services in Eastern Canada. It outlines their full product offering across valves, field instrumentation, control products, analytical products and integrated solutions. It also provides their mission to provide the highest quality automation products and services with strong technical support.
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke Super-Thermometer. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke 1594A. Datasheet Fluke 1595A. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Cox Precision metering products by Badger Meter provide flow measurement solutions for the test and measurement market and precision industrial applications.
The document lists numerous standards and protocols from various organizations that relate to instrumentation and process control. It covers standards from SABS, API, ASME, ANSI, NF, CFR, ASTM, FCI, ISA, IEEE, EIA, EN, NEMA, NFPA, BS, IEC, ISO, and NACE. The quality assurance section specifies that test certification must come from organizations such as UL, FM, SABS, CSA, or BASEEFA.
This document provides information on various level, flow, and grain monitoring devices from FineTek Co., Ltd. It includes brief descriptions of several product series for applications such as grain temperature monitoring, level measurement, flow measurement, data transmission, and wireless monitoring. Device options include different output types, materials, approvals, and accessories to suit a range of industrial needs. Product categories include level switches, level transmitters, flow meters, displays, and wireless monitoring systems.
This document describes Friends Reliance Group, a professional engineering company that provides industrial solutions and services. It offers products and solutions related to instrumentation and controls, electrical systems, condition monitoring, non-destructive testing, and analytical measurement. The company aims to deliver high quality and timely solutions to meet customer expectations. It provides services including project management, automation systems, and monitoring systems for various industrial sectors.
Scalable NDT Instruments for the Inspection of Variable Geometry ComponentsOlympus IMS
For the past several years, the aviation industry has seen above normal growth due, in part, to lower oil prices, saving major aircraft operators millions of dollars. As a result of this outstanding growth, production rates for new airplanes have increased and new aircraft programs are being launched. Consequently, aviation component manufacturers are facing new challenges including a rise in production rates, a high probability of detection (POD) due to the critical nature of the parts being manufactured, lack of skilled operators, and parts with increasingly complex geometry.
Ultrasonic phased array (PA) instruments have evolved, enabling an increase in inspection speeds and the implementation of advanced acquisition strategies. The introduction of scalable instruments and advanced acquisition strategies helps manufacturers address the inspection challenges they are facing. Scalability can now be used for nondestructive testing (NDT), enabling system integrators and manufacturers to improve the performance of their solutions by using multiple instruments in parallel. The evolution of electronic components enables advanced acquisition strategies, such as adaptive ultrasound, to be implemented. Adaptive ultrasound simplifies the inspection of complex components and improves the POD by using innovative signal-processing algorithms.
This paper presents an overview of scalable NDT instruments with the goal of helping NDT integrators and manufacturers to address the challenges they are facing in terms of system performance, production output, and quality control.
Datasheet Fluke 5502A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
The 5502A Multi-Product Calibrator is a robust and transportable calibrator that can calibrate a wide variety of electrical test equipment. It has protection circuits to prevent damage from operator errors and ergonomic handles for easy transport. The 5502A can calibrate DMMs up to 4.5 digits, current clamps, panel meters, thermometers, chart recorders, and more. It can be automated with calibration software for efficient calibration.
Mohammad Mintu is applying for the position of Instrument Supervisor and has over 14 years of experience in instrumentation for oil and gas projects in India and abroad. He provides his contact information, education qualifications including a diploma in instrumentation engineering, and describes his extensive experience in construction, commissioning, and maintenance of instrumentation systems. Mintu is looking to establish himself in an esteemed organization and utilize his skills and experience.
This document is a curriculum vitae submitted by M. Antonyraj for the position of instrument technician. It outlines his 9 years of experience in instrument maintenance, calibration, and repair work in India and abroad in Qatar and Oman. It also lists his educational qualifications which include a diploma in electronics and communication engineering, safety certifications, and descriptions of the types of instrumentation he has worked with, including transmitters, control valves, fire and gas detection systems.
Sagar Ennam is seeking a position as an analyzer and instrumentation technician with over 5 years of experience calibrating, testing, and maintaining various process and analytical instruments. He has worked on gas chromatography, cloud point analyzers, TOC analyzers, pH and conductivity instruments, oxygen analyzers, moisture analyzers, and gas detectors. Sagar also has experience installing, commissioning, and testing process instrumentation including pressure, temperature, level, and flow transmitters, control valves, and sensors. He is proficient in DCS and PLC systems and has participated in several plant startups and commissioning activities. Sagar holds a BTech in electrical engineering and a diploma in electronics and instrumentation engineering.
Jeyaraj Selvaraj has over 17 years of experience in electrical and instrumentation inspection, testing, and commissioning for oil, gas, and petrochemical projects. He has worked on projects in Kuwait and Saudi Arabia for companies like Chevron, KOC, SABIC, and SATORP. His experience includes material inspection, installation inspection, factory acceptance testing, site testing, pre-commissioning, and ensuring compliance with quality standards. He is seeking a senior position in project management or inspection.
This document provides a summary of S Raja's qualifications and experience as an instrumentation engineer. It includes details about his 9 years of experience in instrumentation projects for oil, gas and utility companies. It also lists his areas of expertise, such as maintenance, commissioning, automation, and handling a variety of instrumentation equipment. His core competencies include working with DCS, PLC, SCADA and safety systems from manufacturers like Yokogawa, ABB and Siemens.
Parthasarathy V seeks a challenging career in a reputed firm and provides his contact information and objective. He has over 8 years of experience as a senior instrumentation technician on offshore oil and gas platforms in India. His experience includes installation, commissioning, calibration and maintenance of various instrumentation systems, including distributed control systems, on multiple projects for companies like ONGC, BG India, and Leighton. He is proficient in working with common field instrumentation brands and holds qualifications in instrumentation and related technical areas.
Lingeswaran.P is an instrumentation and control engineer with over 8 years of experience in the power industry. He has expertise in commissioning, operating, and maintaining combined cycle power plants and their critical electrical and instrumentation systems. His resume provides details on his work experience with various power and industrial plants in India and Kuwait, highlighting his responsibilities in testing, commissioning, calibrating, and maintaining different types of field instruments and control systems.
Sinetec Automation Pvt ltd
Complete Solutions in test Measurement,Calibration and Condition Monitoring.
We are Authorized Distributor For: Fluke, Fluke Calibration,Rohde & Schwarz & ISA, Microtest,Zera.
Product Distribute locations Tamilnadu,kerala.
Mohd Mustaque Alam is applying for the position of Instrument Supervisor and has over 13 years of experience in instrumentation for oil, gas, petrochemical, fertilizer, and chemical industries. He has worked on projects in the UAE, Saudi Arabia, Nigeria, and India as an Instrument Supervisor. His experience includes commissioning, calibration, loop checking, troubleshooting, and preventive maintenance of various field instruments and control systems. He is proficient in shutdown work, fire and gas systems, and using test instruments for calibration and commissioning.
This resume is for Job Jose Kachappilly, an instrumentation technician with over 11 years of experience. He has worked on projects in Kuwait, the UK, Qatar, and India, maintaining and calibrating various instruments including transmitters, valves, switches, and vibration monitoring equipment. He is proficient in distributed control systems, emergency shutdown systems, vibration monitoring, and safety systems. He seeks a position where he can utilize his instrumentation and project experience.
Vivek Kumar Karn has over 11 years of experience in control and instrumentation. He has worked as a Manager of Instrumentation at a gasification plant and as a Senior Engineer for a process automation company. He has a Bachelor's degree in Electronics. He has expertise in engineering, construction, commissioning, control systems, calibration, and various field instruments.
• A competent professional with over 8 years of rich & versatile experience in Quality Control & Inspection and Instrument Maintenance commissioning-pre commissioning Operations (Onshore) in India & Middle East across Oil & Gas industry
• Well versed with the concepts of process control, calibration, loop checking, pre-commissioning, commissioning and troubleshooting for Pneumatic, Electro-Pneumatic & Smart Instruments
• Holds the merit of working with renowned organizations like Supreme Group FZE (Fuels), Qatar Engineering & Construction Company W.L.L., Petromar (Saipem) Soyo Base, Hofincons Infotech Industrial Services, J Ray Mc Dermott Middle East Inc. and Sabero Organics Gujarat Ltd.
This document outlines the education and experience of an instrumentation and control engineer. It details their educational background including an Instrumentation and Control Engineering Technology program degree from Lambton College as well as various training programs. It then outlines the applicant's skills and over 10 years of experience in instrumentation and control roles for various companies including Emerson, Siemens, Shanghai Automation Instrumentation, and Ontario Power Generation. Their most recent role is as a Process Control and Automation Specialist for Chemtura.
Amit More is seeking a position as an Instrument Technician with over 11 years of experience in maintenance, commissioning, and instrumentation in the oil, gas, power, and LNG industries. He has a diploma in Instrumentation and Control and ITI certifications in Instrument Mechanics. His experience includes calibration, troubleshooting, commissioning, and plant shutdown work. He has worked with companies in Qatar, Kuwait, India, and is proficient in DCS, PLC, and other automation systems.
The document is a curriculum vitae for Parthasarathy V. It summarizes his contact information, objective of seeking a challenging career, 8 years of experience as an instrument technician in the oil and gas sector on offshore platforms, and provides details of his experience with various companies working on instrumentation and maintenance projects for clients like ONGC and BG India. It also lists his qualifications as a diploma in process instrumentation and additional qualifications in DCS, PLC, SCADA and STCW-95.
This document provides a resume and summary of qualifications for Ramkamal Arjunbhal Khalasi, an instrumentation technician with over 10 years of experience in instrumentation, calibration, commissioning, and maintenance roles in oil, gas, and petrochemical plants. It includes contact information, educational background, work experience history with 8 different employers in the UAE, Saudi Arabia, Qatar, India and Bahrain, as well as technical skills and responsibilities.
Fahad Bin Hasan has over 8 years of experience as an instrumentation QA/QC inspector for oil, gas, and petrochemical projects in Saudi Arabia. He is approved by Saudi Aramco as an instrument inspector and familiar with international codes and standards related to intrinsically safe and electrical instrumentation systems. His experience includes inspecting field installations, reviewing documentation, loop checking, and ensuring work is completed according to quality standards and specifications. He has worked as an instrumentation inspector for several companies including Larssen & Toubro, Technicas Reunidas Gulf, and Sinopec on various projects in Jubail and Yanbu.
COVER LETTER
I am writing to outline my extensive experience and successful track record as an Electrical and Instrument Construction/Maintenance Supervisor. I believe I possess the skills, qualifications and vital experience necessary to make a very significant contribution to your operation.
My extensive experience in chemical, petrochemical, thermal power plant, nuclear power plant, fertilizer plant and cement industries, and construction industry I have been involved with installation, maintenance, testing, troubleshooting, in E & I and repairing and maintenance of electronics system, worked on power electronics, worked on electrical control system, worked on frequency drive, soft starter,PLC,DCS,foundation field bus system, security system, structured cabling networking, surveillance system, fire and gas system, hazardous area instrumentation I am looking forward to have a great time with your company
Abdullah Shar has over 5 years of experience as an instrument technician in the oil and gas industry. He has a BA degree and 3 years of experience working with instruments used in natural gas plants, gas turbines, and field instrumentation including control valves, fire and gas systems, and vibration equipment. He has worked on installation, maintenance, calibration and troubleshooting of various instruments.
Srinivas Reyya is seeking a challenging position utilizing his 11 years of experience in industrial instrumentation. He has worked in the sugar and cement industries calibrating and maintaining field instruments. He holds qualifications in instrumentation, electricity, and apprenticeships. Reyya has skills in software, operating systems, and hardware troubleshooting. He provides details of his professional experience maintaining and calibrating various instruments at multiple companies in the sugar and cement industries.
1. Career Objective:-
To serve to progressive organization offering job satisfaction a challenging work environment and
vast opportunity for easiest development base purely upon achievement and results.
Qualification:-
Degree Board/University Year Marks Percentage
D.A.E.
(Instrument
Technology)
Government College of
Technology, Samanabad,
Faisalabad
2004-07 2459/3300 74%
Apprentice
Technician
Instrument
Sitara Chemical Industries
Ltd.
10.08.2001 to 10.08.2004
Matriculation
(Science)
Board of Intermediate &
Secondary Education,
Faisalabad.
2001 559/850 65%
Computer Skills MS Word, MS Excel, Internet, Windows 98, XP, 2000
Awards
Got Star Employee of the month in September 2014 award against outstanding performance in
SACHLO Al-Riyadh KSA.
Professional Experience:-
04 years of experience as Senior Technician Instrument and Control in SITARA
CHEMICAL INDUSTRIES LIMITED, 34Km Sheikhupura Road, Faisalabad w.e.f
02.07.2007 to 10.09.2011.
Presently I am working as Supervisor Instrument and Control in Saudi Factory for
Chlorine and Alkalies (SACHLO) Al-Riyadh KSA w.e.f. 18.09.2011 to till date.
JOB SKILLS:-
Maintenance work responsibilities:-
I have worked on different types of HART & Foundation ™ Field bus systems. Maintenance, loop
check, trouble shooting, Calibration and maintenance of all types of instruments like Temperature,
Pressure, Flow, Level and Vibration monitor system, transmitters valves and gauges. Support
the maintenance group to solve complicated problems.
Muhammad Saeed Aslam
S/o Muhammad Aslam
District- Faisalabad, Pakistan
Email: saeedaslam205@gmail.com
Tele: 00966590641021
Curriculum Vitae
Instruments and Control Supervisor
2. Transmitters. Yokogawa, Magnatrol, Yamtake, Rosemount, ABB, Honeywell, Fuji, etc.
ON/OFF & Shut-off Valves, Xomox, Arca, Honeywell Leden, Mestonel Limitorque, Rotork
and maxseal, Masonelian, Fisher, Emerson
Control Valves. Fisher, Masonelian, Serveglcon, Arca, Honeywell, Xomox, Flow Serve,
Rotork, Foxboro.
Positioners Fisher, Goldey, Arca, Siemens, Honeywell, Masonelian, Krohne, ABB, Matso,
Samson etc.
Magnetic flow meters: Yokogawa, Yamatake, Fisher, Rosemount &ABB etc.
PH, ORP, Conductivity Transmitters: ABB Yokogawa, Rosemount, Hanna, fore bass
Marshal etc.
Vortex Flow meters, Ultrasonic flow meters, Turbine flow meters, Coriolis mass flow
meters, Thermal mass flow meters.
Level measurement with different methods like as: Contact and non-contact level sensors,
Dp type level transmitters, Displacer type level transmitters, Ultrasonic level transmitters,
Sound level transmitters, Radar type level transmitters, Capacitance type level transmitters
CO2, SO2, H2S, CS, TOC, Dissolved oxygen, Oxygen analyzer and gas Analyzer.
Indicators, Pressure Gauges, Pressure Switches, Level Switches, Vibrations Switches,
Temperature switches, Temperature Gauges, Temperature transmitters, Sensors, SOV’s,
RTD’s (Resistance Temperature Detector) PT 100/PT 1000, Thermocouples, Thermistor,
Radiation pyrometer, Transducers R/I, V/I, I/P, etc.
Density measurement with vibrating tube Densito meter.
Vibration measurement with Velocity sensors, Electromagnetic linear velocity transducers,
Electromagnetic Tachometers generators and Acceleration sensors like Capacitance
accelerometer, piezoelectric accelerometer, Potentiometric accelerometers, Servo gauge
accelerometer.
Installation proximity’s Probe. Radial, Axial, Key phasor, SE probe, Termination gap setting
Trouble shooting simulation with TK–3(2E, 2G) field to DCS.
Carrying out planned maintenance in accordance with the requirements of the planned
maintenance system.
Responsible all type of maintenance in field.
Calibration, Servicing, Testing and Maintenance of Electronic Pneumatic and Hydraulic
Instruments at Workshop Test Bench and In Field online Systems.
Shut Down work responsibilities:-
Testing, Calibration, commissioning and servicing of all types field instruments. To make the
shutdown jobs list and accomplishment of said jobs list. We remove Process equipments
instrument for Mechanical work after finish connect back and Troubleshoot during start up.
Loop/Function Test and commissioning work responsibilities:-
Exposures in Work permit system & safety.
Exposure to On Line analyzers and sample handling systems.
Testing, Calibration, commissioning and servicing of all types field instruments and
Cascading temperature loop, ratio control loop.
Parameterization of instrument with (SFC. Hart and FF 375) communicator sequence test
and logic test.
Closed loop test to confirm the continuity of cables. During loop/Function test, simulated
the process variable with hand held communicator or from DCS in manual mode for FF &
HART.
To monitor the function of instruments and Confirmation availability of inputs alarms &
switches on DCS coming from field against Alarm & Trip Set-point List and P&ID.
Check Local/ manually the operation & travel of control valves and shut off valves. Also
during start up trouble shooting.
Excellent communication and interpersonal skills and Work well in a team-environment or
as an individual.
Erection work responsibilities:-
3. Instrument Termination and cable glands according to instrument loop diagram (ILD) and
instrument segment diagram (ISD) and As-Built the diagrams.
Installation of different kinds of instruments according to P&ID, instrument location plant,
piping plan IPL/ILP, isometric and 3D drawings.
Good experiences as a loop check coordinator & Installation of Control Panels, conduits
or ladders, laying & Termination of instruments & System cables.
I can read and worked on P&ID, ILD, and Instrument Location, piping plan, Fire & gas
detection Layout, Instrument impulse line/Electro pneumatic hook ups, wiring diaphragm
tec.
Worked with Standard Test/Master equipments:-
Pneumatic Calibrator (Eurotron Model Micro Cal. P.)
Electronic Calibrator (CA 100 by Yokogawa) Multifunction Calibrator (Fluke 725)
Hand Held Communicators such as Smart (Honeywell, Yamatake) & Hart ABB,
Rosemount 275 Yokogawa BT 100, BT200, FF Foundation 375 Communicators.
Temp. Calibrator – Haven/Tempcal 650, Jofra calibrator Model 650 SE.
Memo Cal 81 for different source e.g. R, ⁰C, mV, mA etc.
Analog & Digital Multi meters.
Process Calibrator, Simul/Meas, Source mA, mV, RTD, TC, HZ, (Altek Techcheck/ TM-
820 Druck, Fluck, etc.)
SMART MANOMETER, Meriam Instrument / 350 Series.
Dead Weight Tester – M2000-3, M2800/2, Ruska Instrument Corporation, Budenberg.
Wabolator for vibration and speed TK–3(2E, 2G)
Control System, PLC & DCS Experience:-
PLC by Siemens Semitic S7-300/400.
PLC by Triconex for ESD System.
FACP (Fire Alarm Control Panel) Proline Protect Limit.
HSSD (High Sensitivity Smoke Detector) Siemens.
Vibration Monitoring System Bently Nevada 7200, 3300 and 3300XL.
DCS of Yokogawa CS 3000.
On Off, Proportional, Integral, Derivative Controllers.
Boiler Drum Control system, Two Element, Three Element loop Control System. Cascade
and Ratio control System, Feed forward, Feedback control system.
QA/QC Inspection activities:-
Quality assurance/Quality control the purpose of this (QA/QC) is to establish the sequence of
requirement for the quality of material quality of works its inspection and records.
QA/QC’s ITP’s and QCPprocedure informs about the kinds of quality check (surveillance
inspection witness or hold points) means quality of works is being done in proper sequences.
ITP procedure addresses the activities and requirement in details.
NCR Noncompliance Report, QA/QC personal has reserve the right issue a warning of the
contractor doesn’t comply or violate with the standard procedure.
General work procedure (WP) activities will be as follows;
Receiving Drawing and documents.
Reproduction of Drawing
Issuing of Drawing to site
New issuing new revision
Shredding of Drawings
Redlining Drawings
Transmittal of redlines to client (As built).
International standard organization are as below;
ISO;9001, ISO;9002, ISO, 9003 etc.
Standard height to install the instruments is 1.4 meter but it can very less or more as per
locations convenience.
4. Required documents for an inspection;
RFI (Request for inspection)
P&ID for line verification
PP for location (pipe plan)
Wiring diagram for wiring details
Data sheet for calibration and pressure testHookupetc. for remote tubing/air line QR for
maintaining record
WP, work procedure, to check each and every steps as per spec.
QCO for issuing in case of little violation
NCR, for issuing in case of major violation etc.
Following are the required documents for a remote loop folder:
Loop package check list
ILD (instrument loop diagrams)
Instrument loop acceptance records (TR/test record)
P&ID (piping & instrument Diagram)
ISS/IDS (instrument specification sheet/instrument data sheet)Alarm List
Calibration record (TR)
Cable megger report (primary prior to pulling)
Cable megger report (secondary after pulling)
Pressure test record (TR)
MC check record (remote loop)(green color)
MC punch list
Loop check punch list.
Following are the required documents for a local loop folder:
Loop package check list
ILD (if not mechanical loop)
Cable megger report (primary prior to pulling) if not mechanical loop
Cable megger report (secondary after pulling) if not mechanical loop
Alarm list (if not mechanical loop)
P&ID
ISS/ISD (instrument specification sheet/instrument data sheet)
Calibration record (TR)
Pressure test record (TR) if required
MC check record (local loop)(green color)
MC punch list
Visual check punch list/loop check punch list.
ITPs inspection and test plan, details of work scope
Required types of Inspections Hold point (H) is the level of inspection that client inspection must
require through RFI and cannot be proceeded until inspection is done by client. Witness point
(W) that inspection activity can be proceeded without client inspection or if client is not available
as per RFI timing.
Request for inspection (RFI), RFI raise only when the status of the preliminary inspection is
satisfactory, and the works (items) are hold or witness point.
A project specification specifies the minimum requirements according to the design and relevant
international codes and standards.
ITP Document that defines the activities requiring inspection or test (witness hold points etc.) the
controlling specifications the acceptance criteria the persons responsible and the record to be
produced.
INSPECTION & TEST PLAN
QCP procedures that complements the ITP, by providing information that cannot practically be
included in the ITP, but is necessary in order to perform control inspection and test.
Project Procedure is a procedure that presents the systematic controls to be implemented and
identifies the responsibilities and authorities in loop check to ensure that the system wiring from
field to control console functioning fine.
Inspection points for a cable tray installation.
5. Material check as per approved spec, size and type, trays hook-up, proper distance structure,
tray to tray i.e. Power/control/and signal/low voltage and high voltage , support fixed strongly not
shaking.
Inspection point for field instruments with impulse tubing Is that check materials inspection as
per approved spec material, type and size installation as per hook-up, check line route to avoid
any obstruction check tube support, compression fitting of ferrules, and then pressure test
(hydrostatic test) shall be done
Inspection points for cable laying is that to check material inspection as per approved materials,
type and size, meggering, cable routing drawing, completion of cable route
(Tray conduit or trench etc.) And cable numbering tags, cable bending, use of proper tools and
equipment for cable pulling.
Inspection points for junction box and Marshalling cabinets. Material inspection, type, size as per
approved specification, installation hook-up for frame, bracket or stands, fixed properly means
shaking free, name plate and tag no.
Determine the correct installation of flow orifice, orifice data (tag) be punched in the upstream of
orifice, the data (tag) side shall be in the upstream of flow direction.
To ensure shield of signal cable is earthed on both sides to avoid the current noise (resonance).
RFI raised when QA/QC department of contractor is satisfied that the work detailed in the
construction RFI is completed, then request shall be submitted for inspection to the client QA/QC
department.
Personal Details
Father’s Name : Muhammad Aslam
Date of Birth : 15-04-1985
Religion : Islam
Marital Status : Unmarried
Passport No : BX 1801831
Nationality : Pakistani
Covering Letter:-
9 years of experience working for shutdowns, maintenance in Oil & Gas Sector, Refineries,
Power Plants, Fertilizers, Petrochemicals, Utility plants and other process industries in Pakistan
and abroad. Have experiences installation, Erection, cabling, Logic/Function Testing, loop
checking, pre-commissioning, Commissioning & Maintenance of process control instruments.
Fault Diagnosis, Trouble shooting of control Panels, Electronic & Pneumatic instruments such
as Transmitters, Controllers, Indicators, Converters, Recorders, Switches and Control Valves
etc. I have performed my job responsibilities with good career as Instrument & Control
Specialist are followings:-
1) Carry out the Preventive Maintenance, Breakdown Maintenance,
2) Online Troubleshooting and Fault Finding of Field Instruments and Control Systems.
3) Upgradation and Modification in Drawings, DCS & SACADA Systems.
4) Solve the all Process and Instrumentation Related Problems,
5) Calibration, Servicing, Testing and Maintenance of Electronic Instruments At Workshop
Test Bench and In Field online from DCS Systems.
(Instruments Such As Transmitters, Gauges, Controllers, Control Valves, Positioners,
Switches, Converters)
6) Control Systems Logic Test,
7) Backups & Installation of Control System,
8) Replacement of I/O’s Cards and Communication Cards,
9) Starting & Resetting of Systems.
10) Minor Changings in Software or Graphics
I would be proud to join your team, so please let me know if you need any additional information.
I hope to hear from you in the near future. Thank you for your time and consideration.