yunarwinardi.com - Resetting AP6521 or AP7131 sometimes cannot be done by press reset button for 15 seconds. We show you to reset by using console cable (the blue one), in very easy way.
Motorola solutions ap7131 access point installation guide wi ng 5.5 version...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP7131 and AP7131N Access Points. It describes unpacking the access point components, selecting an installation location considering antenna coverage, mounting options including wall, ceiling and above-ceiling mounting, connecting power and network cables, and configuring the access point LED indicators. The document also provides specifications for the access point models and regulatory compliance information.
Motorola solutions ap 6521 access point installation guide - wi ng 5.5 versio...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-6521 Access Point. It describes the contents of the AP-6521 package, features of the access point, and guidelines for installation including wall mounting, suspended ceiling installation, and above-ceiling installation. Detailed steps are provided for hardware installation and basic access point configuration. Specifications including electrical, physical, and radio characteristics are also included.
Motorola air defense configuring an ap650 running wing 5.x as a sensor onlyAdvantec Distribution
The document provides instructions for configuring a Motorola AP650 access point as a sensor-only device. It describes the default configuration of the AP650, and outlines steps to log in, configure basic settings like IP address and sensor server settings, and verify the sensor-only configuration. The configuration process involves commands entered in CLI mode to configure the radios, network settings, and sensor server communication.
Smartify Home Automation - Client PresentationAbhi Bavishi
Smartify offers professional home automation consultancy services, allowing you to fully automate and control your home. Our brands USPs, include:
- Premium Brands
- Modularized setup
- No Internal Wiring
- Lifetime support
Este documento fornece um manual para o aplicativo web embarcado do sistema Primme Acesso. O sumário descreve as principais seções do manual, incluindo configuração inicial via wizard, cadastros de dados do empregador, colaboradores, horários e grupos de acesso, além de configurações gerais do equipamento e download de registros.
The document discusses different types of electrical wiring systems. It describes wiring as connecting electrical accessories from the power source to devices in a home. There are two common wiring methods - the joint box system and loop-in system. Additional wiring systems covered include cleat wiring, batten wiring, casing and capping wiring, lead sheathed wiring, and concealed conduit wiring. Concealed conduit wiring, where conduits are hidden inside walls, is described as the most popular, durable, and safe wiring system currently used.
Manual do Monitor de Referência Mackie MR8 MK2 (PORTUGUÊS)Habro Group
Este manual fornece instruções de segurança e uso para o Monitor de Estúdio Ativo de Alta Resolução MR8mk2. Ele inclui informações sobre como conectar e operar o monitor, cuidados com a segurança elétrica, especificações técnicas e informações sobre garantia.
El documento describe los componentes principales y las instalaciones típicas de un circuito cerrado de televisión (CCTV), incluyendo cámaras, monitores, procesadores de video, videograbadora, cableado y conectores. Explica el funcionamiento básico de un sistema CCTV y presenta diferentes configuraciones como la instalación con varios canales, procesador de video o cámaras motorizadas.
Motorola solutions ap7131 access point installation guide wi ng 5.5 version...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP7131 and AP7131N Access Points. It describes unpacking the access point components, selecting an installation location considering antenna coverage, mounting options including wall, ceiling and above-ceiling mounting, connecting power and network cables, and configuring the access point LED indicators. The document also provides specifications for the access point models and regulatory compliance information.
Motorola solutions ap 6521 access point installation guide - wi ng 5.5 versio...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-6521 Access Point. It describes the contents of the AP-6521 package, features of the access point, and guidelines for installation including wall mounting, suspended ceiling installation, and above-ceiling installation. Detailed steps are provided for hardware installation and basic access point configuration. Specifications including electrical, physical, and radio characteristics are also included.
Motorola air defense configuring an ap650 running wing 5.x as a sensor onlyAdvantec Distribution
The document provides instructions for configuring a Motorola AP650 access point as a sensor-only device. It describes the default configuration of the AP650, and outlines steps to log in, configure basic settings like IP address and sensor server settings, and verify the sensor-only configuration. The configuration process involves commands entered in CLI mode to configure the radios, network settings, and sensor server communication.
Smartify Home Automation - Client PresentationAbhi Bavishi
Smartify offers professional home automation consultancy services, allowing you to fully automate and control your home. Our brands USPs, include:
- Premium Brands
- Modularized setup
- No Internal Wiring
- Lifetime support
Este documento fornece um manual para o aplicativo web embarcado do sistema Primme Acesso. O sumário descreve as principais seções do manual, incluindo configuração inicial via wizard, cadastros de dados do empregador, colaboradores, horários e grupos de acesso, além de configurações gerais do equipamento e download de registros.
The document discusses different types of electrical wiring systems. It describes wiring as connecting electrical accessories from the power source to devices in a home. There are two common wiring methods - the joint box system and loop-in system. Additional wiring systems covered include cleat wiring, batten wiring, casing and capping wiring, lead sheathed wiring, and concealed conduit wiring. Concealed conduit wiring, where conduits are hidden inside walls, is described as the most popular, durable, and safe wiring system currently used.
Manual do Monitor de Referência Mackie MR8 MK2 (PORTUGUÊS)Habro Group
Este manual fornece instruções de segurança e uso para o Monitor de Estúdio Ativo de Alta Resolução MR8mk2. Ele inclui informações sobre como conectar e operar o monitor, cuidados com a segurança elétrica, especificações técnicas e informações sobre garantia.
El documento describe los componentes principales y las instalaciones típicas de un circuito cerrado de televisión (CCTV), incluyendo cámaras, monitores, procesadores de video, videograbadora, cableado y conectores. Explica el funcionamiento básico de un sistema CCTV y presenta diferentes configuraciones como la instalación con varios canales, procesador de video o cámaras motorizadas.
Motorola solutions ap6522 access point installation guide wi ng 5.5 version...Advantec Distribution
This document provides installation instructions for the AP6522 Access Point. It includes guidelines for site preparation, package contents, hardware installation including wall and ceiling mounting options, antenna configuration, LED indicators, basic access point configuration, specifications, regulatory information, and support contact details. Installation requires an Ethernet switch or power supply to power the access point via Ethernet cable.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
The document provides instructions for installing the Motorola AP6532 Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The wall mount uses two screws and anchors. For ceilings, the integrated model twists onto a T-bar grid and the external model uses additional hardware attached to ceiling tiles. Setup and configuration instructions are also included to complete the installation.
The document describes the innovative features of the AP 7522 wireless access point. It provides dual-band 802.11ac and 802.11n radios for high performance WiFi. It offers internal or external antenna options and can function as both an access point and wireless sensor. The access point provides security, load balancing, and other features to support mission critical applications on the wireless network.
Motorola solutions ap7181 access point wi ng 5.4 migration how to guide (part...Advantec Distribution
This guide provides instructions for migrating AP7181 devices from firmware 3.2.3.0-005MR to WiNG 5.4 using an RFS controller. Key steps include:
1. Creating a Smart RF policy, RF domain, and MeshConnex policy on the RFS controller to configure settings for the migrated AP7181 devices.
2. Creating an AP7181 device profile and configuring Ethernet and radio settings.
3. Upgrading the firmware of individual AP7181 devices or using Wireless Manager for large-scale upgrades. The devices furthest from the root should be upgraded first.
4. After upgrade, the AP7181 devices will connect to the R
Motorola solutions ap6521 access point installation guide (part no. 72 e 1554...Advantec Distribution
The document provides installation instructions for the AP-6521 Series Access Point, which includes:
- Guidelines for mounting the access point on a wall, under a suspended ceiling, or above a ceiling.
- Details on the package contents, features, and specifications of the access point.
- Information on defining a basic configuration for the access point using an initial setup wizard.
The document is an installation guide for the AP6522 Access Point. It provides instructions on hardware installation including wall mounting and suspended ceiling mounting for integrated antenna and external antenna models. It also lists package contents, specifications, warnings and regulatory information. The guide is intended for qualified network installers to properly setup and configure the access point.
Dokumen tersebut membahas beberapa kasus etik yang dihadapi oleh organisasi profesi bidan (IBI). Kasus-kasus tersebut meliputi kesalahan diagnosis bidan, pelanggaran wewenang dalam menangani persalinan, dan pelanggaran etik seperti melakukan aborsi. Dokumen ini juga menjelaskan isu etik, dilema, dan penyelesaian yang seharusnya dilakukan dalam menghadapi kasus-kasus tersebut.
The document introduces the Pro-EC44, a new single or dual loop temperature controller. Key features include a graphic display, USB configuration, data logging, Modbus communications, and support for one or two control loops. It can be configured using intuitive front panel controls or software to easily program multiple units for applications requiring plant-wide temperature control and monitoring.
The document discusses developing a device driver for a USB-SPI bridge chip called the MCP2210 to enable rapid testing of an IEEE 802.15.4 Linux kernel subsystem. Key points include: selecting the MCP2210 due to its cheap board, public datasheet, and existing out-of-tree driver; connecting it to the Linux SPI subsystem; using Virtme tools to enable fast test cycles without rebooting; and the remaining work of simplifying the driver, implementing provisioning, and getting it mainlined.
The age of IoT is at our threshold. Many large-scale companies have already started developing security solutions to make this brave new world safe. One of possible, we may even say, surefire approaches is to create a device which would connect to a network and protect other devices in it. Let’s discuss the efficiency of the given approach in relation to BitDefender Box.
The document is an installer/user guide for the Geist Watchdog 100 environmental monitoring device. It provides instructions on installation, setup, and use of the device. Key details include:
- The device monitors temperature, humidity, and other environmental sensors to provide trend analysis data.
- It has an onboard temperature/humidity sensor and ports to connect up to four external analog sensors.
- Setup instructions cover mounting, power/network connection, and accessing the web interface using the default IP address.
- The web interface home page displays readings from onboard and connected sensors.
This document provides an overview of embedded systems and the AVR microcontroller. It discusses how embedded systems combine hardware and software to perform tasks like processing and storing data. Examples of embedded systems include those used in biotechnology, telecom, military, automotive, and consumer electronics. It then describes the AVR microcontroller, its features, memory segments, pin descriptions, and how to interface it with hardware using Embedded C. Code examples are provided to blink LEDs and interface with 7-segment displays and LCDs.
The document discusses using a PLC to control an induction motor using a variable frequency drive (VFD). It provides an overview of the key components involved - the PLC, induction motor, and VFD. It also lists the software used and describes how the components will be interfaced. The document outlines that it will discuss the advantages and disadvantages of this setup, applications, and provide a conclusion.
The document introduces TULIPP starter kits, which are deployment-ready solutions for image processing powered by Zynq SoC and FPGA chips. The starter kits use the PC/104 form factor and include carrier boards, system-on-modules, and I/O expansion modules. Example starter kits are introduced for applications in ADAS, medical, UAV, agriculture, and more, each with different sensor and interface specifications. Early success of a starter kit for agriculture applications is also mentioned.
This document provides instructions for installing and connecting an Eaton ePDU G3 power distribution unit. It describes how to set up network connectivity through DHCP or manually assign a static IP address via the LCD interface or serial connection. The document also explains how to connect multiple ePDUs together in a daisy chain configuration using an Ethernet splitter.
Remote iOS Devices Server – Scaling iOSNick Abalov
At Badoo, we run more than 1200 end-to-end tests for our main iOS application.
This should amount to more than 40 hours of tests, but we run them in just 1.5 hours. And now, thanks to some updates, we've got it down to a mere 35 minutes.
In this talk, I will describe how we moved from tests tightly coupled to infrastructure (simulator hosts and tools) to an iOS remote device server. I'll also explain how this simplified our parallel test runs and made our tests and infrastructure easier to maintain and scale.
This document discusses how to create a smart home system using Android and open source software. It describes OpenRemote (OR) software which can be used to control devices over different protocols from a phone app. The Itach WF2IR hardware allows sending infrared signals to devices from an Android device. The document provides steps to set up the OR controller and app, configure the WF2IR, integrate commands, and troubleshoot issues. It also discusses using the Android Open Accessory Development Kit to control robots with an Android device.
The document provides an overview and introduction to using the Intel Edison board, including what Edison is, how to power it up and boot it, connecting to WiFi using ConnMan, getting started with Yocto to build a custom Linux image, and connecting hardware like GPIO. Key topics covered include using MRAA to control GPIO pins from code, booting processes involving the boot ROM and U-Boot, and recommendations to use the mini breakout board or buy from Fry's for beginners.
A starter guide how to use Microchip MPLAB IDE for PIC microcontrollers and related tools like MPLAB C18, C30 and C32 compilers, and how to MPLAB features to get connected and integrated with programmer/debugger devices and development kits from Microchip.
for more discussion and articles about different microcontroller platforms and tutorials please visit: http://elrayescampaign.blogspot.ca/
The user manual provides step-by-step instructions for installing and configuring the AKCP Door Control Unit (DCU) and its access control components. It describes the DCU hardware, how to wire the DCU to card readers, fingerprint readers, exit buttons, and door locks. It also provides diagrams of typical installations and specifications for cable runs. The manual is intended to guide users through setup and common configurations.
The document summarizes the specifications of the AOP-8070 fanless operator panel PC. It has a 520MHz Marvell PXA270 processor, 128MB RAM, 7" 16:9 WQVGA LCD display, Ethernet and serial port connectivity. It supports Windows CE 6.0 and has CompactFlash storage. Measuring 8.9" x 6.1" x 1.97", it is designed for panel mounting and operates from 10-24V DC power in temperatures from 0-50°C.
Motorola solutions ap6522 access point installation guide wi ng 5.5 version...Advantec Distribution
This document provides installation instructions for the AP6522 Access Point. It includes guidelines for site preparation, package contents, hardware installation including wall and ceiling mounting options, antenna configuration, LED indicators, basic access point configuration, specifications, regulatory information, and support contact details. Installation requires an Ethernet switch or power supply to power the access point via Ethernet cable.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
The document provides instructions for installing the Motorola AP6532 Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The wall mount uses two screws and anchors. For ceilings, the integrated model twists onto a T-bar grid and the external model uses additional hardware attached to ceiling tiles. Setup and configuration instructions are also included to complete the installation.
The document describes the innovative features of the AP 7522 wireless access point. It provides dual-band 802.11ac and 802.11n radios for high performance WiFi. It offers internal or external antenna options and can function as both an access point and wireless sensor. The access point provides security, load balancing, and other features to support mission critical applications on the wireless network.
Motorola solutions ap7181 access point wi ng 5.4 migration how to guide (part...Advantec Distribution
This guide provides instructions for migrating AP7181 devices from firmware 3.2.3.0-005MR to WiNG 5.4 using an RFS controller. Key steps include:
1. Creating a Smart RF policy, RF domain, and MeshConnex policy on the RFS controller to configure settings for the migrated AP7181 devices.
2. Creating an AP7181 device profile and configuring Ethernet and radio settings.
3. Upgrading the firmware of individual AP7181 devices or using Wireless Manager for large-scale upgrades. The devices furthest from the root should be upgraded first.
4. After upgrade, the AP7181 devices will connect to the R
Motorola solutions ap6521 access point installation guide (part no. 72 e 1554...Advantec Distribution
The document provides installation instructions for the AP-6521 Series Access Point, which includes:
- Guidelines for mounting the access point on a wall, under a suspended ceiling, or above a ceiling.
- Details on the package contents, features, and specifications of the access point.
- Information on defining a basic configuration for the access point using an initial setup wizard.
The document is an installation guide for the AP6522 Access Point. It provides instructions on hardware installation including wall mounting and suspended ceiling mounting for integrated antenna and external antenna models. It also lists package contents, specifications, warnings and regulatory information. The guide is intended for qualified network installers to properly setup and configure the access point.
Dokumen tersebut membahas beberapa kasus etik yang dihadapi oleh organisasi profesi bidan (IBI). Kasus-kasus tersebut meliputi kesalahan diagnosis bidan, pelanggaran wewenang dalam menangani persalinan, dan pelanggaran etik seperti melakukan aborsi. Dokumen ini juga menjelaskan isu etik, dilema, dan penyelesaian yang seharusnya dilakukan dalam menghadapi kasus-kasus tersebut.
The document introduces the Pro-EC44, a new single or dual loop temperature controller. Key features include a graphic display, USB configuration, data logging, Modbus communications, and support for one or two control loops. It can be configured using intuitive front panel controls or software to easily program multiple units for applications requiring plant-wide temperature control and monitoring.
The document discusses developing a device driver for a USB-SPI bridge chip called the MCP2210 to enable rapid testing of an IEEE 802.15.4 Linux kernel subsystem. Key points include: selecting the MCP2210 due to its cheap board, public datasheet, and existing out-of-tree driver; connecting it to the Linux SPI subsystem; using Virtme tools to enable fast test cycles without rebooting; and the remaining work of simplifying the driver, implementing provisioning, and getting it mainlined.
The age of IoT is at our threshold. Many large-scale companies have already started developing security solutions to make this brave new world safe. One of possible, we may even say, surefire approaches is to create a device which would connect to a network and protect other devices in it. Let’s discuss the efficiency of the given approach in relation to BitDefender Box.
The document is an installer/user guide for the Geist Watchdog 100 environmental monitoring device. It provides instructions on installation, setup, and use of the device. Key details include:
- The device monitors temperature, humidity, and other environmental sensors to provide trend analysis data.
- It has an onboard temperature/humidity sensor and ports to connect up to four external analog sensors.
- Setup instructions cover mounting, power/network connection, and accessing the web interface using the default IP address.
- The web interface home page displays readings from onboard and connected sensors.
This document provides an overview of embedded systems and the AVR microcontroller. It discusses how embedded systems combine hardware and software to perform tasks like processing and storing data. Examples of embedded systems include those used in biotechnology, telecom, military, automotive, and consumer electronics. It then describes the AVR microcontroller, its features, memory segments, pin descriptions, and how to interface it with hardware using Embedded C. Code examples are provided to blink LEDs and interface with 7-segment displays and LCDs.
The document discusses using a PLC to control an induction motor using a variable frequency drive (VFD). It provides an overview of the key components involved - the PLC, induction motor, and VFD. It also lists the software used and describes how the components will be interfaced. The document outlines that it will discuss the advantages and disadvantages of this setup, applications, and provide a conclusion.
The document introduces TULIPP starter kits, which are deployment-ready solutions for image processing powered by Zynq SoC and FPGA chips. The starter kits use the PC/104 form factor and include carrier boards, system-on-modules, and I/O expansion modules. Example starter kits are introduced for applications in ADAS, medical, UAV, agriculture, and more, each with different sensor and interface specifications. Early success of a starter kit for agriculture applications is also mentioned.
This document provides instructions for installing and connecting an Eaton ePDU G3 power distribution unit. It describes how to set up network connectivity through DHCP or manually assign a static IP address via the LCD interface or serial connection. The document also explains how to connect multiple ePDUs together in a daisy chain configuration using an Ethernet splitter.
Remote iOS Devices Server – Scaling iOSNick Abalov
At Badoo, we run more than 1200 end-to-end tests for our main iOS application.
This should amount to more than 40 hours of tests, but we run them in just 1.5 hours. And now, thanks to some updates, we've got it down to a mere 35 minutes.
In this talk, I will describe how we moved from tests tightly coupled to infrastructure (simulator hosts and tools) to an iOS remote device server. I'll also explain how this simplified our parallel test runs and made our tests and infrastructure easier to maintain and scale.
This document discusses how to create a smart home system using Android and open source software. It describes OpenRemote (OR) software which can be used to control devices over different protocols from a phone app. The Itach WF2IR hardware allows sending infrared signals to devices from an Android device. The document provides steps to set up the OR controller and app, configure the WF2IR, integrate commands, and troubleshoot issues. It also discusses using the Android Open Accessory Development Kit to control robots with an Android device.
The document provides an overview and introduction to using the Intel Edison board, including what Edison is, how to power it up and boot it, connecting to WiFi using ConnMan, getting started with Yocto to build a custom Linux image, and connecting hardware like GPIO. Key topics covered include using MRAA to control GPIO pins from code, booting processes involving the boot ROM and U-Boot, and recommendations to use the mini breakout board or buy from Fry's for beginners.
A starter guide how to use Microchip MPLAB IDE for PIC microcontrollers and related tools like MPLAB C18, C30 and C32 compilers, and how to MPLAB features to get connected and integrated with programmer/debugger devices and development kits from Microchip.
for more discussion and articles about different microcontroller platforms and tutorials please visit: http://elrayescampaign.blogspot.ca/
The user manual provides step-by-step instructions for installing and configuring the AKCP Door Control Unit (DCU) and its access control components. It describes the DCU hardware, how to wire the DCU to card readers, fingerprint readers, exit buttons, and door locks. It also provides diagrams of typical installations and specifications for cable runs. The manual is intended to guide users through setup and common configurations.
The document summarizes the specifications of the AOP-8070 fanless operator panel PC. It has a 520MHz Marvell PXA270 processor, 128MB RAM, 7" 16:9 WQVGA LCD display, Ethernet and serial port connectivity. It supports Windows CE 6.0 and has CompactFlash storage. Measuring 8.9" x 6.1" x 1.97", it is designed for panel mounting and operates from 10-24V DC power in temperatures from 0-50°C.
Raspberry Pi GPIO Tutorial - Make Your Own Game ConsoleRICELEEIO
Learning from scratch, we design 20 labs to help you learn the Raspberry Pi GPIO.
What topics are included?
* Basic electronic theory
* Basic Python syntax
* Basic Linux command
* GPIO: digital input/digital output/analog input/analog output
* System integration
Buy:
https://ricelee.com/product/gpio-game-console-starter-kit
Source:
https://github.com/raspberrypi-tw/gpio-game-console
The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Demo request dan pemesanan produk, hubungi PT. Siwali Swantika. Jakarta : 021-45850618. Kunjungi website kami di www.siwali,com, untuk produk spesifikasi dan varian lainnya dari IDEAL Networks.
Elc Europe 2020 : u-boot- porting and maintaining a bootloader for a multimed...Neil Armstrong
This document summarizes the status of porting and maintaining bootloader software for Amlogic multimedia system-on-chips (SoCs). It discusses the open source support for the Linux kernel, U-Boot bootloader, and Trusted Firmware-A. While mainline Linux support is good, U-Boot and TF-A support remains partial, lacking features like secure boot, NAND support, and testing. The document also outlines the fragmented and closed nature of Amlogic's binary boot firmware and packaging tools.
2. Prepare Hyper Terminal or PuTTY
• On Windows 7 you will not found Hyper
terminal.
• However I copied it for you here
https://www.dropbox.com/s/m70sye9dg4saimh/hyperterminal.zip?dl=0
• No need to install, just run Hyperterm.exe
from the folder
• Alternatively you can use PuTTY
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
2
3. Serial Port Parameter
• Bits per second: 19200
• Data bit:8
• Parity:None
• Stop Bit:1
• Flow Control: None
If you don’t have serial port, you can but any USB to serial
port converter.
3
4. Reset to Factory Default
• After successfully access to AP6521 , login as
reset and using password FactoryDefault
• AP will reboot
• Congratulations now your AP reset back to
factory default.
• Login using user name motorola and password
motorola (Wing5.3)
4