Refiner Plate - Mother Plate & Baby Segment Purpose of Refining Improve fibrillation and less cutting. Bring product properties within specifications. Improve run ability on Paper Machine. Changes in Pulp properties. More strength properties: Tensile strength, Internal bond. Surface properties: Smoothness, porosity. Other important properties: Formation, Bulk. Improve Printability Properties. LOW INTENSITY REFINING Hardwood and Recycled fibers have shorter and thinner fibers than Softwood pulp, and resistance against refining load is much lower. So, they are compelled to go for "Low Intensity Refining " The Gentle refining action increases the specific surface area of the fibers by fibrillating outer surface, leading to greater strength development. PRODUCT INFORMATION Existing TDR's & DDR's can be converted into new generation TDR's & DDR's. Mother plate as one-time investment. New Plates with reduced weight. Cost effective solution for the costlywelded disc. Benefits of Low-Intensity Refining Improves the highest degree of fibrillation and therefore better bonding pulp Improved Tensile strength and Porosity at a given Bulk 8 drainage. Increase Bulk with same smoothness & drainage. Improve Pickling resistance of Hardwood vessel segments. Reduce energy requirements to achieve targeted specifications. Greater Shive reduction at a given drainage in mechanical pulp. 18-30% higher tear, 10% higher Tensile and twice the long fiber content. 23-27% energy savings. Treating the pulp with "FINE"/"SUPERFINE" bar patterns having higher cutting edge length (EEL] will reduce power consumption and improve strength property of paper. For more information, please visit https://parasonmachinery.com/ Email: info@parasonglobal.com