Randall Environmental 2016
•
0 likes•41 views
Randall Environmental specializes in air quality compliance and optimization through project management and ensuring compliance with local and EPA regulations. They offer air pollution control equipment and consulting services, including ambient and source analyzers, CEMS evaluation, and source testing. Randall Environmental has over 30 years of experience in industries including power, petrochemical, and general industry, focusing on recent updates to the Clean Air Act and low NOx and CO rules. They provide these services through distributor and vendor agreements with various companies that supply equipment like regenerative thermal oxidizers, vapor recovery units, and bag leak detector sensors.
Report
Share
Report
Share
Download to read offline
Recommended
Project report1
This document describes the objectives and methodology of a modeling study examining the relationship between energy use, indoor air quality, and thermal comfort in commercial building HVAC systems. The study aims to (1) assess how well commonly used HVAC systems can meet indoor air quality standards, (2) determine the energy cost of meeting air quality standards, and (3) quantify energy reductions required to maintain air quality during efficiency projects. It uses computer modeling of different HVAC systems and control strategies to generate a large dataset for analysis, with modifications made to the DOE-2 model to better represent infiltration and other factors. The results will be reported in 7 subsequent documents.
JRyan2014
This document provides information on James Ryan's professional experience and qualifications. It outlines his education in environmental engineering and certification as a California Air Resources Board GHG verifier. It then details his expertise in areas such as air quality and GHG reporting, permitting, compliance, and sustainability. The document concludes by describing some of Ryan's representative experience conducting air quality and GHG assessments and developing compliance and reporting plans for various clients.
Steve Davidson Engineering Resume
This document provides a resume for Stephen L. Davidson, a mechanical engineer with over 30 years of experience managing projects in petroleum refining, petrochemical, power generation, and hazardous waste industries. It lists his education, licenses, skills, and extensive work history managing complex capital projects from inception through commissioning. His background includes expertise in process engineering, piping, mechanical, electrical, and instrumentation systems with a strong emphasis on safety.
RESUME _2016 Rev (A1)
Raymond "Ken" Gates has over 20 years of experience in instrument engineering including DCS systems, analyzers, problem solving, writing instrument specifications, organizational skills, project planning, control valve technology, vibration technology, and SAP. He has a BS in Industrial Engineering from the University of Houston and an AA in Applied Science from San Jacinto College. His professional accomplishments include converting boilers from one DCS system to another on a fast track project with limited space and reducing downtime on other projects. He has worked for various engineering companies as a senior or control system engineer on projects for Dow Chemical, BP, BASF, and others.
ARB General Presentation
This document provides an overview of Primoris Services Corporation, a diversified international construction company. It summarizes the company's operating groups in industrial and underground construction, lists its operating locations across the US and internationally, and highlights some of its project experience building power plants, pipelines, refineries, and renewable energy facilities. The company was established in 1946 and has grown significantly over the decades through strategic acquisitions and expansion into new markets.
Arb2011
A Diversified International Construction Company is a large construction firm that was established in 1946. It has over 3,500 employees nationwide and specializes in industrial and underground construction projects. Some of its areas of expertise include power generation, refineries, pipelines, and renewable energy. The company prioritizes safety and has extensive experience successfully completing large, complex industrial construction projects on time.
Resume
Robert Kentucky Burton is pursuing an MS in Environmental Engineering from UMBC with a 3.53 GPA and anticipated graduation in May 2017. He has a BS in Chemical/Environmental Engineering from UMBC and work experience as an intern at the EPA analyzing air quality data and researching enforcement technologies. His thesis and research has focused on developing and calibrating sensors for air and water quality monitoring. He is a member of several professional societies and has leadership experience with student organizations.
Paul Southall's CP2 Presentation
The document outlines the stages and objectives for evaluating and implementing a surface water source heat pump project for a client like the National Trust. It discusses the Trust's properties and energy use. Common past issues included unclear project scopes, oversized systems, and lack of performance monitoring. The stages include feasibility assessments, design, construction, commissioning, operation and maintenance, and decommissioning. Objectives involve assessing environmental impacts, identifying suitable water sources, determining permissions, estimating demands, financial analysis and risk assessment.
Recommended
Project report1
This document describes the objectives and methodology of a modeling study examining the relationship between energy use, indoor air quality, and thermal comfort in commercial building HVAC systems. The study aims to (1) assess how well commonly used HVAC systems can meet indoor air quality standards, (2) determine the energy cost of meeting air quality standards, and (3) quantify energy reductions required to maintain air quality during efficiency projects. It uses computer modeling of different HVAC systems and control strategies to generate a large dataset for analysis, with modifications made to the DOE-2 model to better represent infiltration and other factors. The results will be reported in 7 subsequent documents.
JRyan2014
This document provides information on James Ryan's professional experience and qualifications. It outlines his education in environmental engineering and certification as a California Air Resources Board GHG verifier. It then details his expertise in areas such as air quality and GHG reporting, permitting, compliance, and sustainability. The document concludes by describing some of Ryan's representative experience conducting air quality and GHG assessments and developing compliance and reporting plans for various clients.
Steve Davidson Engineering Resume
This document provides a resume for Stephen L. Davidson, a mechanical engineer with over 30 years of experience managing projects in petroleum refining, petrochemical, power generation, and hazardous waste industries. It lists his education, licenses, skills, and extensive work history managing complex capital projects from inception through commissioning. His background includes expertise in process engineering, piping, mechanical, electrical, and instrumentation systems with a strong emphasis on safety.
RESUME _2016 Rev (A1)
Raymond "Ken" Gates has over 20 years of experience in instrument engineering including DCS systems, analyzers, problem solving, writing instrument specifications, organizational skills, project planning, control valve technology, vibration technology, and SAP. He has a BS in Industrial Engineering from the University of Houston and an AA in Applied Science from San Jacinto College. His professional accomplishments include converting boilers from one DCS system to another on a fast track project with limited space and reducing downtime on other projects. He has worked for various engineering companies as a senior or control system engineer on projects for Dow Chemical, BP, BASF, and others.
ARB General Presentation
This document provides an overview of Primoris Services Corporation, a diversified international construction company. It summarizes the company's operating groups in industrial and underground construction, lists its operating locations across the US and internationally, and highlights some of its project experience building power plants, pipelines, refineries, and renewable energy facilities. The company was established in 1946 and has grown significantly over the decades through strategic acquisitions and expansion into new markets.
Arb2011
A Diversified International Construction Company is a large construction firm that was established in 1946. It has over 3,500 employees nationwide and specializes in industrial and underground construction projects. Some of its areas of expertise include power generation, refineries, pipelines, and renewable energy. The company prioritizes safety and has extensive experience successfully completing large, complex industrial construction projects on time.
Resume
Robert Kentucky Burton is pursuing an MS in Environmental Engineering from UMBC with a 3.53 GPA and anticipated graduation in May 2017. He has a BS in Chemical/Environmental Engineering from UMBC and work experience as an intern at the EPA analyzing air quality data and researching enforcement technologies. His thesis and research has focused on developing and calibrating sensors for air and water quality monitoring. He is a member of several professional societies and has leadership experience with student organizations.
Paul Southall's CP2 Presentation
The document outlines the stages and objectives for evaluating and implementing a surface water source heat pump project for a client like the National Trust. It discusses the Trust's properties and energy use. Common past issues included unclear project scopes, oversized systems, and lack of performance monitoring. The stages include feasibility assessments, design, construction, commissioning, operation and maintenance, and decommissioning. Objectives involve assessing environmental impacts, identifying suitable water sources, determining permissions, estimating demands, financial analysis and risk assessment.
Cathodic Protection for Above Ground Storage Tanks (AGSTs)
The document discusses cathodic protection for above ground storage tanks (AGSTs). It introduces Elsyca and Audubon Companies, who provide software and services related to corrosion engineering. It then reviews the technical aspects of AGST cathodic protection, including the goals, complexities, and assumptions of current designs. Case studies are presented that measure and model the performance of different CP system designs. Recommendations are provided for improving new and existing AGST CP designs and construction to better achieve 30-year tank lifespan.
Alex Ewart - RESUME- 2016- revised
Alexander Ewart has over 12 years of experience in environmental science and compliance, hazardous waste management, and laboratory work. He has skills in areas such as technical reporting, project management, environmental monitoring, data analysis, and site remediation. Ewart's background includes work in water treatment plants, laboratories, environmental consulting, and for the EPA, with a focus on sampling, analysis, compliance reporting, and ensuring work is completed safely and on schedule. He holds certifications in areas like hazardous waste operations and emergency response.
Bakken Artificial Lift & Production Optimization Congress 2014
The Bakken success story has continued into 2014, with the latest data showing that wells in the region are now producing over a million barrels of oil per day. However, operators are increasingly aware that with the productivity rate of Bakken wells shown to decline by an average of 70% in the first year, it is vital that they optimize the production phase of their operations if this explosive growth is to be sustained.
Operators in the region therefore increasingly need to know which artificial lift techniques and chemical treatments are working best in the Bakken to cost-effectively maximize production rates.
Building on the sell-out success of the first event in the series, the 2nd Annual Bakken Artificial Lift & Production Optimization Congress 2014 will again bring together Bakken's leading E&Ps for the only dedicated congress for production professionals in the Bakken, focusing on artificial lift, chemical treatments & production optimization.
Featuring a totally revamped agenda for 2014, the event this year will present 20+ brand new case studies based on work done in the last year. Speakers will be examining technical solutions for reducing failure rates, maximizing productivity & improving run times by optimizing artificial lift design & chemical treatments for Bakken wells & overcoming challenges relating to sand control, gas interference & wellbore deviation.
Due Diligence Presentation (Preview)
GLE Associates is an environmental consulting firm formed in 1989 with offices across the Southeast U.S. They offer full-service environmental due diligence capabilities including Phase I, II, and III ESAs to identify risks. A Phase I ESA follows ASTM standards to identify recognized environmental conditions through records reviews and site visits. It provides liability protection but has limitations as it does not include sampling. Phase II ESAs involve sampling based on Phase I findings. Phase III develops a remediation plan. Completing due diligence helps manage loan, regulatory and acquisition risks.
AC Interference Analysis and Mitigation
Bryan Louque presented on asset integrity and corrosion related to AC interference analysis and mitigation. The presentation covered the mechanisms of AC coupling, potential threats to pipelines from stray currents, screening guidelines, information gathering techniques like site surveys and modeling, digital simulation methods, and monitoring and mitigation strategies like increasing separation distances, using gradient control mats, and installing decouplers. The goal is to prevent coating damage and safety hazards by maintaining pipe-to-soil potentials below 15 VAC and current densities below 30 A/m2.
The New Era of National Ambient Air Quality Standards
The document discusses the new 1-hour National Ambient Air Quality Standards (NAAQS) for nitrogen dioxide and sulfur dioxide. The new standards are very stringent, with levels of 188 μg/m3 for nitrogen dioxide and 196 μg/m3 for sulfur dioxide. States will need to develop implementation plans by 2013 using air quality modeling to demonstrate individual facilities will not cause violations. The new standards will significantly impact permitting for major sources and states may request modeling for minor sources as well. Facilities should proactively evaluate compliance to identify potential emission reductions.
SpecailtyDrilling_InjectionWellConstruction-v-1
Layne is an industry leader in injection well construction for underground liquid waste disposal and geothermal applications. They provide turnkey design-build services for Class I-VI injection wells, including engineering, permitting, drilling, testing, and maintenance. Some examples of recent projects include test injection wells for water treatment in Texas, deep disposal wells for power plant wastewater in California, a geothermal exploratory well for a military hospital in Texas, and multiple deep injection/monitor wells for a power station in Florida.
Recent Developments in Environmental Due Diligence
The document summarizes recent developments in environmental due diligence for real estate transactions. Key points include: (1) The new ASTM E1527-13 standard updated definitions for recognized environmental conditions, historical recognized environmental conditions, and controlled recognized environmental conditions. (2) Vapor intrusion is now considered similarly to contaminated groundwater migration. (3) Case studies highlight issues with characterizing past contamination under current standards and using additional testing to clarify controlled recognized conditions.
AI&C Facility Underground Piping Program
This document outlines an underground piping integrity program focused on asset integrity and corrosion prevention. It discusses collecting safety and inspection data using mobile applications integrated with GIS mapping software. Risk analysis is performed to prioritize piping circuits and threats like external corrosion, internal corrosion, stray currents, and microbially-influenced corrosion. Inspection and monitoring methods are chosen based on risk level and include hydrotesting, direct assessment, corrosion coupons, and ultrasonic thickness probes. The overall goal is to quantify risk reduction from mitigation actions and optimize inspection intervals and resource allocation.
Mark Kavanagh CV 2016 no dates
Mark Kavanagh has over 30 years of experience in environmental consulting and regulatory work. He has held senior positions with the Alberta Utilities Commission, Energy Resources Conservation Board, and several environmental consulting firms. He has extensive experience conducting environmental assessments, developing environmental management systems, and advising on regulatory compliance issues in Canada, the United States, India, China, Kazakhstan, and Mongolia. Kavanagh also has experience instructing university courses and conducting training programs internationally.
Scheme for the construction of water channels
we are giving only idea for making water channel for poor less un economical area for different counties where people need water for drinking we present presentation in univsty CIIT
Recent Developments in Environmental Due Diligence
The document summarizes recent changes to the standards for conducting environmental due diligence. It outlines revisions to key definitions like Recognized Environmental Condition (REC), Historical REC, and Controlled REC. Regulatory records reviews are now emphasized. User responsibilities in the due diligence process are also clarified. Vapor intrusion is addressed directly and considered no differently than contaminated groundwater. The new standards aim to provide clearer guidance on evaluating and classifying environmental risks at properties.
The New Era of NO2 and SO2 National Ambient Air Quality Standards
The document summarizes the new national ambient air quality standards for nitrogen dioxide and sulfur dioxide. The new 1-hour standards are very stringent, and compliance will require facilities that emit over 100 tons per year of these pollutants to conduct air quality modeling to demonstrate they do not cause violations. States will need to develop plans by 2013 to achieve the standards through measures like more stringent emission limits and monitoring requirements. Facilities should prepare for potential modeling requests from states by reviewing existing modeling and considering emission reductions.
Resume Ramagost_K 7_2016
Kenneth Ramagost has over 40 years of experience in instrument and controls engineering. He has worked on numerous projects involving process control instrumentation at refineries and chemical plants. Some of his responsibilities have included engineering shutdown systems, wiring systems, valve specifications, and loop checking. He is proficient in various standards including ISA, NACE, API, NFPA, and NEC.
Ami Adini & Associates - Southern California Environmental Firm
This environmental consulting firm provides the following services:
- Phase I and II environmental site assessments, soil and groundwater investigations, and assistance with cleanup fund applications.
- Underground storage tank services including upgrades, maintenance, and removal.
- Expert witness testimony and environmental consulting for real estate transactions and regulatory issues.
- Remediation of contaminated sites, soil, and groundwater using methods like bioremediation.
- Services are aimed at helping clients through the regulatory process to achieve site closure.
BlueScape How to Create a CEQA Air Quality Analysis for Development Projects ...
This webinar by James Westbrook, President of BlueScape Environmental, provides an overview of how to create a CEQA Air Quality Analysis. The first section of the webinar discusses when an Air Quality Analysis must be completed under CEQA; project types including construction and operation phases; air pollutant emission sources and applicable CEQA significance thresholds; how to construct a conservative analysis while filling in assumption “holes;” review of project alternatives and mitigation requirements; the role of air agencies in CEQA review and relationship to other actions such as air permitting; special analysis cases; and strategies to work with agencies and the public throughout the air quality impact review process. The webinar is presented from the standpoint of CEQA air quality guidelines provided by the South Coast Air Quality Management District (SCAQMD).
The second part of the webinar presents a technical discussion on methods and tools used to complete air quality studies, including CalEEMod emission modeling software, CARB EMFAC and OFFROAD databases, and AERMOD and HARP2 impact modeling software. A case example for completing an air quality study for a commercial development using CalEEMod is presented.
James Westbrook can be reached at training@bluescapeinc.com or 877-486-9257. Please contact us for questions and support for how to create a CEQA Air Quality Analysis.
Energy
The document provides an overview of ASME Performance Test Codes (PTCs) which are technical standards for testing power generation and other industrial equipment. It discusses that ASME has over 100 years of experience developing PTCs and currently offers 48 codes covering areas like power production, combustion, fluid handling, and emissions. The codes provide uniform testing procedures and protocols to ensure accurate, precise, and reliable test results. Participating on the PTC committees allows volunteers from industry to contribute their expertise to developing standards that meet the needs of different stakeholders.
RES
Christopher Yen has over 30 years of experience in process engineering and safety roles. He has worked for several major energy companies, including Shell, Suncor, Ineos, ConocoPhillips, and Petro Canada. His experience includes facilitating HAZOPs and LOPAs, project leadership, process optimization, and technical support. He has a degree in chemical engineering from the University of Toronto and safety certifications including TUV Functional Safety Engineer and PHA Leader Facilitator.
Calex Services Portfolio
Calex Environmental is a full-service environmental consulting firm with over a century of combined experience. It specializes in assisting clients with regulatory compliance by providing practical solutions to complex environmental issues. Calex offers a comprehensive range of services including air quality, permitting, testing, indoor air quality assessments, and health and safety compliance. It serves a diverse range of industrial and institutional clients throughout New England and the United States.
FINAL REV COMPANY BROCHURE
2020 Environmental Solutions is an environmental consulting company located in Calgary, Alberta that has been in operation since 1993. It provides services such as air quality assessments, waste management, environmental management programs, regulatory support, and energy management to clients in industries such as oil and gas, chemicals, and transportation. The company is led by Paresh Thanawala, who has over 25 years of experience in various environmental roles.
VNCV150515
This resume summarizes the professional experience of Nicholas Vaughan as a QHSSE (Quality, Health, Safety, Security and Environment) Engineer and Auditor over 38 years working on major international projects. He has worked in oil/gas, petrochemical, rail, bridge and nuclear projects based in numerous countries. His experience includes quality management, engineering, inspection, auditing, and developing quality plans and procedures. He holds various certifications in quality management, safety, engineering and non-destructive testing.
Ammonite cormetrics presentation english october 2012
Ammonite Corrosion Engineering and Cormetrics Ltd. provide corrosion engineering and consulting services to oil and gas companies. They have over 300 years of combined experience in corrosion management. Services include Risk-Based Inspection programs, materials selection, failure analysis, and specialized laboratory testing to evaluate corrosion prevention chemicals and monitor corrosion. They have numerous oil and gas clients across Canada.
More Related Content
What's hot
Cathodic Protection for Above Ground Storage Tanks (AGSTs)
The document discusses cathodic protection for above ground storage tanks (AGSTs). It introduces Elsyca and Audubon Companies, who provide software and services related to corrosion engineering. It then reviews the technical aspects of AGST cathodic protection, including the goals, complexities, and assumptions of current designs. Case studies are presented that measure and model the performance of different CP system designs. Recommendations are provided for improving new and existing AGST CP designs and construction to better achieve 30-year tank lifespan.
Alex Ewart - RESUME- 2016- revised
Alexander Ewart has over 12 years of experience in environmental science and compliance, hazardous waste management, and laboratory work. He has skills in areas such as technical reporting, project management, environmental monitoring, data analysis, and site remediation. Ewart's background includes work in water treatment plants, laboratories, environmental consulting, and for the EPA, with a focus on sampling, analysis, compliance reporting, and ensuring work is completed safely and on schedule. He holds certifications in areas like hazardous waste operations and emergency response.
Bakken Artificial Lift & Production Optimization Congress 2014
The Bakken success story has continued into 2014, with the latest data showing that wells in the region are now producing over a million barrels of oil per day. However, operators are increasingly aware that with the productivity rate of Bakken wells shown to decline by an average of 70% in the first year, it is vital that they optimize the production phase of their operations if this explosive growth is to be sustained.
Operators in the region therefore increasingly need to know which artificial lift techniques and chemical treatments are working best in the Bakken to cost-effectively maximize production rates.
Building on the sell-out success of the first event in the series, the 2nd Annual Bakken Artificial Lift & Production Optimization Congress 2014 will again bring together Bakken's leading E&Ps for the only dedicated congress for production professionals in the Bakken, focusing on artificial lift, chemical treatments & production optimization.
Featuring a totally revamped agenda for 2014, the event this year will present 20+ brand new case studies based on work done in the last year. Speakers will be examining technical solutions for reducing failure rates, maximizing productivity & improving run times by optimizing artificial lift design & chemical treatments for Bakken wells & overcoming challenges relating to sand control, gas interference & wellbore deviation.
Due Diligence Presentation (Preview)
GLE Associates is an environmental consulting firm formed in 1989 with offices across the Southeast U.S. They offer full-service environmental due diligence capabilities including Phase I, II, and III ESAs to identify risks. A Phase I ESA follows ASTM standards to identify recognized environmental conditions through records reviews and site visits. It provides liability protection but has limitations as it does not include sampling. Phase II ESAs involve sampling based on Phase I findings. Phase III develops a remediation plan. Completing due diligence helps manage loan, regulatory and acquisition risks.
AC Interference Analysis and Mitigation
Bryan Louque presented on asset integrity and corrosion related to AC interference analysis and mitigation. The presentation covered the mechanisms of AC coupling, potential threats to pipelines from stray currents, screening guidelines, information gathering techniques like site surveys and modeling, digital simulation methods, and monitoring and mitigation strategies like increasing separation distances, using gradient control mats, and installing decouplers. The goal is to prevent coating damage and safety hazards by maintaining pipe-to-soil potentials below 15 VAC and current densities below 30 A/m2.
The New Era of National Ambient Air Quality Standards
The document discusses the new 1-hour National Ambient Air Quality Standards (NAAQS) for nitrogen dioxide and sulfur dioxide. The new standards are very stringent, with levels of 188 μg/m3 for nitrogen dioxide and 196 μg/m3 for sulfur dioxide. States will need to develop implementation plans by 2013 using air quality modeling to demonstrate individual facilities will not cause violations. The new standards will significantly impact permitting for major sources and states may request modeling for minor sources as well. Facilities should proactively evaluate compliance to identify potential emission reductions.
SpecailtyDrilling_InjectionWellConstruction-v-1
Layne is an industry leader in injection well construction for underground liquid waste disposal and geothermal applications. They provide turnkey design-build services for Class I-VI injection wells, including engineering, permitting, drilling, testing, and maintenance. Some examples of recent projects include test injection wells for water treatment in Texas, deep disposal wells for power plant wastewater in California, a geothermal exploratory well for a military hospital in Texas, and multiple deep injection/monitor wells for a power station in Florida.
Recent Developments in Environmental Due Diligence
The document summarizes recent developments in environmental due diligence for real estate transactions. Key points include: (1) The new ASTM E1527-13 standard updated definitions for recognized environmental conditions, historical recognized environmental conditions, and controlled recognized environmental conditions. (2) Vapor intrusion is now considered similarly to contaminated groundwater migration. (3) Case studies highlight issues with characterizing past contamination under current standards and using additional testing to clarify controlled recognized conditions.
AI&C Facility Underground Piping Program
This document outlines an underground piping integrity program focused on asset integrity and corrosion prevention. It discusses collecting safety and inspection data using mobile applications integrated with GIS mapping software. Risk analysis is performed to prioritize piping circuits and threats like external corrosion, internal corrosion, stray currents, and microbially-influenced corrosion. Inspection and monitoring methods are chosen based on risk level and include hydrotesting, direct assessment, corrosion coupons, and ultrasonic thickness probes. The overall goal is to quantify risk reduction from mitigation actions and optimize inspection intervals and resource allocation.
Mark Kavanagh CV 2016 no dates
Mark Kavanagh has over 30 years of experience in environmental consulting and regulatory work. He has held senior positions with the Alberta Utilities Commission, Energy Resources Conservation Board, and several environmental consulting firms. He has extensive experience conducting environmental assessments, developing environmental management systems, and advising on regulatory compliance issues in Canada, the United States, India, China, Kazakhstan, and Mongolia. Kavanagh also has experience instructing university courses and conducting training programs internationally.
Scheme for the construction of water channels
we are giving only idea for making water channel for poor less un economical area for different counties where people need water for drinking we present presentation in univsty CIIT
Recent Developments in Environmental Due Diligence
The document summarizes recent changes to the standards for conducting environmental due diligence. It outlines revisions to key definitions like Recognized Environmental Condition (REC), Historical REC, and Controlled REC. Regulatory records reviews are now emphasized. User responsibilities in the due diligence process are also clarified. Vapor intrusion is addressed directly and considered no differently than contaminated groundwater. The new standards aim to provide clearer guidance on evaluating and classifying environmental risks at properties.
The New Era of NO2 and SO2 National Ambient Air Quality Standards
The document summarizes the new national ambient air quality standards for nitrogen dioxide and sulfur dioxide. The new 1-hour standards are very stringent, and compliance will require facilities that emit over 100 tons per year of these pollutants to conduct air quality modeling to demonstrate they do not cause violations. States will need to develop plans by 2013 to achieve the standards through measures like more stringent emission limits and monitoring requirements. Facilities should prepare for potential modeling requests from states by reviewing existing modeling and considering emission reductions.
Resume Ramagost_K 7_2016
Kenneth Ramagost has over 40 years of experience in instrument and controls engineering. He has worked on numerous projects involving process control instrumentation at refineries and chemical plants. Some of his responsibilities have included engineering shutdown systems, wiring systems, valve specifications, and loop checking. He is proficient in various standards including ISA, NACE, API, NFPA, and NEC.
Ami Adini & Associates - Southern California Environmental Firm
This environmental consulting firm provides the following services:
- Phase I and II environmental site assessments, soil and groundwater investigations, and assistance with cleanup fund applications.
- Underground storage tank services including upgrades, maintenance, and removal.
- Expert witness testimony and environmental consulting for real estate transactions and regulatory issues.
- Remediation of contaminated sites, soil, and groundwater using methods like bioremediation.
- Services are aimed at helping clients through the regulatory process to achieve site closure.
BlueScape How to Create a CEQA Air Quality Analysis for Development Projects ...
This webinar by James Westbrook, President of BlueScape Environmental, provides an overview of how to create a CEQA Air Quality Analysis. The first section of the webinar discusses when an Air Quality Analysis must be completed under CEQA; project types including construction and operation phases; air pollutant emission sources and applicable CEQA significance thresholds; how to construct a conservative analysis while filling in assumption “holes;” review of project alternatives and mitigation requirements; the role of air agencies in CEQA review and relationship to other actions such as air permitting; special analysis cases; and strategies to work with agencies and the public throughout the air quality impact review process. The webinar is presented from the standpoint of CEQA air quality guidelines provided by the South Coast Air Quality Management District (SCAQMD).
The second part of the webinar presents a technical discussion on methods and tools used to complete air quality studies, including CalEEMod emission modeling software, CARB EMFAC and OFFROAD databases, and AERMOD and HARP2 impact modeling software. A case example for completing an air quality study for a commercial development using CalEEMod is presented.
James Westbrook can be reached at training@bluescapeinc.com or 877-486-9257. Please contact us for questions and support for how to create a CEQA Air Quality Analysis.
Energy
The document provides an overview of ASME Performance Test Codes (PTCs) which are technical standards for testing power generation and other industrial equipment. It discusses that ASME has over 100 years of experience developing PTCs and currently offers 48 codes covering areas like power production, combustion, fluid handling, and emissions. The codes provide uniform testing procedures and protocols to ensure accurate, precise, and reliable test results. Participating on the PTC committees allows volunteers from industry to contribute their expertise to developing standards that meet the needs of different stakeholders.
RES
Christopher Yen has over 30 years of experience in process engineering and safety roles. He has worked for several major energy companies, including Shell, Suncor, Ineos, ConocoPhillips, and Petro Canada. His experience includes facilitating HAZOPs and LOPAs, project leadership, process optimization, and technical support. He has a degree in chemical engineering from the University of Toronto and safety certifications including TUV Functional Safety Engineer and PHA Leader Facilitator.
What's hot (18)
Cathodic Protection for Above Ground Storage Tanks (AGSTs)
Cathodic Protection for Above Ground Storage Tanks (AGSTs)
Bakken Artificial Lift & Production Optimization Congress 2014
Bakken Artificial Lift & Production Optimization Congress 2014
The New Era of National Ambient Air Quality Standards
The New Era of National Ambient Air Quality Standards
Recent Developments in Environmental Due Diligence
Recent Developments in Environmental Due Diligence
Recent Developments in Environmental Due Diligence
Recent Developments in Environmental Due Diligence
The New Era of NO2 and SO2 National Ambient Air Quality Standards
The New Era of NO2 and SO2 National Ambient Air Quality Standards
Ami Adini & Associates - Southern California Environmental Firm
Ami Adini & Associates - Southern California Environmental Firm
BlueScape How to Create a CEQA Air Quality Analysis for Development Projects ...
BlueScape How to Create a CEQA Air Quality Analysis for Development Projects ...
Similar to Randall Environmental 2016
Calex Services Portfolio
Calex Environmental is a full-service environmental consulting firm with over a century of combined experience. It specializes in assisting clients with regulatory compliance by providing practical solutions to complex environmental issues. Calex offers a comprehensive range of services including air quality, permitting, testing, indoor air quality assessments, and health and safety compliance. It serves a diverse range of industrial and institutional clients throughout New England and the United States.
FINAL REV COMPANY BROCHURE
2020 Environmental Solutions is an environmental consulting company located in Calgary, Alberta that has been in operation since 1993. It provides services such as air quality assessments, waste management, environmental management programs, regulatory support, and energy management to clients in industries such as oil and gas, chemicals, and transportation. The company is led by Paresh Thanawala, who has over 25 years of experience in various environmental roles.
VNCV150515
This resume summarizes the professional experience of Nicholas Vaughan as a QHSSE (Quality, Health, Safety, Security and Environment) Engineer and Auditor over 38 years working on major international projects. He has worked in oil/gas, petrochemical, rail, bridge and nuclear projects based in numerous countries. His experience includes quality management, engineering, inspection, auditing, and developing quality plans and procedures. He holds various certifications in quality management, safety, engineering and non-destructive testing.
Ammonite cormetrics presentation english october 2012
Ammonite Corrosion Engineering and Cormetrics Ltd. provide corrosion engineering and consulting services to oil and gas companies. They have over 300 years of combined experience in corrosion management. Services include Risk-Based Inspection programs, materials selection, failure analysis, and specialized laboratory testing to evaluate corrosion prevention chemicals and monitor corrosion. They have numerous oil and gas clients across Canada.
The complexities of nsr permitting ddix
The document summarizes a case study of obtaining an air permit for a new natural gas-fired power block at an existing power plant facility. It describes identifying the project, applicable air permitting regulations, unique solutions to air permitting issues like modeling for particulate matter and nitrogen dioxide standards, and an 18 month timeline. Key lessons learned include planning ahead, developing an air quality modeling protocol early, and identifying emissions reduction credits upfront.
DMUG 2016 - Scott Hamilton, Ricardo Energy & Environment
This presentation discusses using the CALPUFF model to assess odour impacts from a manufacturing facility. It describes the methodology used, which included modeling meteorology with WRF and CALMET, running CALPUFF simulations for different stack parameters, and comparing results to a Warren Springs model. The modeling showed that increasing the stack height from 14m to 30m significantly reduced odor concentrations on and near the site. A design value of 60,000 odor units per second was estimated to prevent complaints at nearby properties. The agreement between modeled and measured meteorology was good.
Short Linkedin CV
Chris Swift has over 30 years of experience in process engineering and safety. He has a Master's Degree in Process Safety and Loss Prevention and is a Chartered Chemical Engineer. He currently works as a consultant providing risk management services and facilitating safety workshops for industries including power, oil, gas, chemicals, and marine. Previously he worked as a Process Safety Engineer for 22 years at a major chemical manufacturing site, where he led safety reports, risk assessments, incident investigations, and over 100 process safety workshops.
C0 2 ricardo_environmental
At the Asia Clean Energy Forum 2016 Ricardo Energy & Environment’s waste management and resource efficiency experts discussed a range of critical issues, including financial, institutional, policy, regulatory, engineering, environmental and social issues around the planning for and delivery of appropriate and effective waste to energy infrastructure in developing economies.
In this presentation Phil White discusses the environmental impacts of waste treatment.
BlueScape and Cooper White - BAAQMD Air Toxics Risk Reduction Rule 11-18 Webi...
This webinar by James Westbrook, President of BlueScape Environmental, and Keith Casto, Partner of Cooper, White & Cooper, provides an overview of the new Bay Area AQMD Air Toxics Risk Reduction Rule 11-18, adopted on November 15, 2017.
This webinar provides you with helpful information you can use to understand the potential impacts from Rule 11-18, and to prepare for compliance, including: overview of applicability and requirements; meaning of the Significant Risk Threshold, the Risk Action Level, TBARCT, and other key definitions; description of Rule 11-18 process steps and compliance requirements, from emissions inventory and risk prioritization, to health risk assessment and risk reduction; tips to update and refine your facility Air Toxics Emissions Inventory, and to reduce potential prioritization as a high-risk facility; tips to work with the BAAQMD on preparation of your facility health risk assessment, and to refine the modeling and health risk calculations using technical methods; how to evaluate health risk reduction options and complete a Risk Reduction Plan for BAAQMD approval; how to demonstrate emission sources will meet TBARCT; and, Rule 11-18 compliance timelines for various risk categories and compliance options.
James Westbrook can be reached at jwestbrook@bluescapeinc.com or 877-486-9257. Keith Casto can be reached at 415-765-6272. Please contact us for any questions or support on the implementation of Rule 11-18 for your facility.
CERAM
CERAM is a leading global materials consulting firm with over 60 years of experience. They provide testing, analysis, consultancy, and other services using state-of-the-art facilities. Their services help clients with product development, problem solving, and adding value to processes across many industries. Some examples of projects include developing new materials to control chemical release rates for agriculture, identifying coating treatments to prevent sticky compounds from damaging rollers, and auditing suppliers to validate product quality.
General Services Sheet
Calex Environmental is a full service environmental consulting firm that provides quality services to comply with regulations. They have over a century of combined experience among their consultants. Calex assists diverse clients across industries with a comprehensive list of services, including air quality, chemicals and waste, permitting, testing, groundwater, and OSHA services.
Rc Virtual Resume
The document summarizes the career experience and responsibilities of an environmental specialist with over 20 years of experience in applied earth sciences and the environmental field. Their experience includes project management, technical writing and analysis, environmental permitting, site remediation, regulatory compliance, hazardous and regulated waste management, and emergency response. They have managed various environmental projects involving facilities, equipment, spills, and remediation systems.
Internship Rmt
RMT is a global environmental and engineering firm that provides various environmental services and technologies to industry clients. The internship involves both office duties like photocopying, filing documents, and scheduling meetings as well as offsite work including a 3-day field study sampling wells to detect solvents in groundwater and using software to assist with safety and hazard reporting. The intern describes it as a great experience for networking and building lasting relationships.
Collaboration opportunities with CO2CRC - presentation by Dianne Wiley at the...
Collaboration opportunities with CO2CRC - presentation by Dianne Wiley at the...UK Carbon Capture and Storage Research Centre
Collaboration opportunities with CO2CRC - presentation by Dianne Wiley in the International CCS session at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014MANSOOR_ALI_CV -QA QC
This document is a resume for Mansoor Ali that provides details about his educational background, certifications, skills, and work experience in electrical and instrumentation quality assurance/quality control. Some key details include:
- He has a B-Tech in Electrical Engineering from Preston University and over 9 years of experience in QA/QC, construction, maintenance, testing and commissioning in various industries.
- He is certified as a QMS Auditor/Lead Auditor and has worked on numerous projects in Qatar and Pakistan for companies like Qatar Gas, QAPCO, and Ras Laffan.
- His responsibilities have included installation, testing, and commissioning of electrical and instrumentation equipment, as well as ensuring quality standards are met
Aker Clean Carbon
Aker Clean Carbon is a global supplier of CO2 capture technology and plants owned by Aker Solutions. It has over 20 years of experience in carbon capture, storage, and utilization. Aker Clean Carbon focuses on developing cost-effective CO2 capture technology through testing projects like its Mobile Test Unit and the Technology Centre Mongstad pilot plant. Its goal is to improve technologies to enable full-scale deployment of carbon capture facilities.
Road Paving As An Option For Pm10 Er Cs
This document discusses generating PM10 emission reduction credits (ERCs) by paving unpaved roads in areas where fugitive dust from vehicle traffic on unpaved roads significantly contributes to PM10 levels. It explains that paving roads can legitimately reduce PM10 emissions and generate valid ERCs. The document outlines the methodology for calculating baseline PM10 emissions from unpaved roads using an EPA emission factor equation, and the steps required to apply for and obtain an ERC certificate for the reductions achieved by paving roads.
ABB CEMS Datasheet ABB cems solution and products information
ABB CEMS Datasheet ABB cems solution and products information - ABB - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Saudi Aramco Carbon Management - May 2013
Saudi Aramco has developed a comprehensive technology roadmap for carbon management that focuses on CO2 capture, storage, and utilization. As part of this roadmap, Saudi Aramco plans to implement a CO2-EOR demonstration project in Saudi Arabia by 2013/2014. This project will inject CO2 into an oil field using 4 injectors and 4 producers to test CO2-EOR and monitor CO2 storage. It aims to evaluate CO2 potential for EOR and storage while testing new monitoring and surveillance technologies to track the CO2 plume and changes in oil saturation.
Overview of Current Directions in Carbon Capture R&D
Future carbon capture R&D efforts need to focus on cost reductions in three main areas: materials, processes and equipment. In this webinar Ron Munson, the Institute’s Principal Manager – Capture, gave an overview of the current directions in carbon capture R&D, including development of higher performance solvents, sorbents and membranes; process improvements and intensification; equipment development; and novel equipment designs.
Similar to Randall Environmental 2016 (20)
Ammonite cormetrics presentation english october 2012
Ammonite cormetrics presentation english october 2012
DMUG 2016 - Scott Hamilton, Ricardo Energy & Environment
DMUG 2016 - Scott Hamilton, Ricardo Energy & Environment
BlueScape and Cooper White - BAAQMD Air Toxics Risk Reduction Rule 11-18 Webi...
BlueScape and Cooper White - BAAQMD Air Toxics Risk Reduction Rule 11-18 Webi...
Collaboration opportunities with CO2CRC - presentation by Dianne Wiley at the...
Collaboration opportunities with CO2CRC - presentation by Dianne Wiley at the...
ABB CEMS Datasheet ABB cems solution and products information
ABB CEMS Datasheet ABB cems solution and products information
Overview of Current Directions in Carbon Capture R&D
Overview of Current Directions in Carbon Capture R&D
Randall Environmental 2016
- 1. Randall Environmental www.randallenvironmental.com (949) 283 - 0305 Southern CA Air Quality Compliance and Optimization Specialist Randall Environmental specializes in project management using proven safety and quality procedures. One stop for air emissions controls, instrumentation and measurement consulting ensuring local and EPA permit compliance every step of the way. Compliance assured from over 30 years experience in power, petrochemical and general industry plants nationwide meeting the strictest in air quality standards. Offering air pollution control (APC) equipment and consulting, process control equipment, ambient and source analyzers and CEMS evaluation, including RATA, compliance or source testing.
- 2. Randall Environmental Specializing in PM and HCl with emphasis on recent updates to the 1970 US EPA CAA nationwide and focusing on low NOx and CO rules in the SCAQMD. Biomass, renewables, fossil fuel and nuclear power as well as general industry can benefit from Randall Environmentals’ products and services. 30 years of experience comes from a long history with KVB, a division of Research Cottrell, KVB-Analect, KVB-Enertec, General Electric, Cemtek Environmental and most recently with The Avogadro Group, Delta Air Quality Services and Montrose Environmental and Air Quality Services,. Air Quality Compliance and Optimization Offerings: Using a variety of distributor, manufacturer’s representative and vendor agreements Ship and Shore Environmental - Regenerative Thermal Oxidizers (RTO), Vapor Recovery Units (VRU), Waste to Energy Controls and APC Engineering Services B3 Systems - Proprietary PM spiking and testing for PM CEMS calibration The Dust Company - Proprietary bag leak detector sensors and controllers Shelter One - Environmental and control building and enclosures Bay City Boiler and Engineering - Boiler sales and Low NOx burner retrofits Montrose Environmental - Air Quality Testing, Ambient and LDAR Services Pod Technologies - Engineering service for energy and air quality products www.randallenvironmental.com (949) 283 - 0305