The RAID-M 100 is a handheld chemical agent detector that uses ion mobility spectrometry to detect, identify, and monitor chemical warfare agents and toxic industrial chemicals. It provides detection of agents down to low ppb concentrations, with audible and visual alarms. Data logging and wireless remote operation allow for vehicle-mounted or facility monitoring applications. The RAID-M 100 is part of Bruker's product line for chemical, biological, radiological and nuclear detection.

1. RAID-M 100
Hand-held Chemical Agent Monitor
Defence CBRNE
Innovation with Integrity

2. The RAID-M 100 is a hand held Chemical
Agent Detector based on the well estab-
lished principle of Ion Mobility Spectro-
metry. It is designed to detect, search
for and locate Chemical Warfare Agents
(CWA) on personnel, equipment,
vehicles and on the ground. Applications
within collective protection facilities are
also possible.
General specification
The RAID-M 100 is able to detect,
classify and identify, quantify and conti-
nuously monitor concentration levels of
the CWA’s specified.
The identity of substances detected is
displayed by its standard code (GA, VX,
etc.) or its appropriate abbreviation (e.g.
GSI for the G-mode simulant). For each
class (G, H and T) a separate bar line is
provided, thus all the classes may be
monitored independently. Hazard levels
are indicated by an incremental bar level
display with eight increments. Moreover
the RAID-M 100 gives an audible and an
optical alarm when identifying an agent.
The RAID-M 100 provides very low
detection limits and short response
times. Due to the state of the art measu-
ring cell and highly sophisticated soft-
ware nerve agents can be detected at
lowest levels. Short recovery times are
achieved by an automatic purge mode.
Data logging system
The RAID-M 100 is equipped with a
data logging system that is capable of
continuous data monitoring. The two
integrated data loggers are able to record
independently from each other individual
spectra (Spectrum-Logger) as well as
the results of a measurement campaign
(Event-Logger). Both can be configured
independently. The capacity of the event
logger is about 3000 events that can be
stored, whereas the spectrum logger
keeps 30 full spectra for subsequent
inspection e.g. of unknown compounds.
Access to such data is possible via the
standard software RAID EventReader, no
additional software is necessary.
RAID-M 100 used in the Field
Display
Key operation field
Visual alarm
Identification and bar display

3. Portable and one handed to operate
The RAID-M 100 is portable with a carrying
sling. Likewise it can be installed on a vehicle
and ship mounting. In addition the equipment
is capable of operation within collective
protection facilities.
Vehicle and shipboard integration
Remote control unit and vehicle mounting
are offered as optional components to
support the vehicle or shipboard installations
of RAID-M 100 instruments.
By means of an EMC unit the
RAID-M 100 can be powered
with 12 – 32 V.
Protected from any hazardous
chemicals the soldier, fireman or
any other user easily operates
the RAID-M 100 from inside the
vehicle or ship.
Reliable Mobile Detector
Basic set
Remote Control Unit
RAID-M 100 with
vehicle mounting
Data and power cable with power
supply 12 VDC / RS232
Battery charger Li-lon/
EU with battery adapter
Protective bag
1 Li-Ion rechargeable
battery pack
Confidence tester for both modes
Carrying
sling Manual
Transport and
storage container
RAID-M
100

4. Anti-terrorism
Homeland defense
First responder market
Non-proliferation measures
Real time monitoring of toxic
and hazardous industrial chemicals
in the environment
Fire fighting control
Chemical disaster management
RAID-AFM
(NC version)
Stationary detector for
critical infrastructure protection
RAID-XP
Innovative mobile
NC Detector
Fields of Application
RAID-S2
Mounted gas trace
detector for long term operation
RAID-M 100 available for
homeland defence market
RAID-series
product line

5. Control and Data
System XIMS-NT
Features of Bruker XIMS NT
IMS instrument control and data
acquisition of the detector
IMS spectra processing and analysis
of two- and three-dimensional IMS
spectra on the PC
Substance identification and
quantification
Library Editor for ion mobility
spectra libraries
Network operation with the NC
monitoring software
Application of several RAID (Rapid Alarm
Identification Device) gas trace detec-
tors and Bruker SVG2 radiation meters
in one networking system for remote
monitoring of hazardous compounds and
remote instrument control. The system
can be integrated into other control and
alarm systems.
IMS spectra acquisition and substance identification with
Bruker XIMS NT.
XIMS-NT IMS Spectra evaluation software
NC Monitoring software
Monitoring System consisting of one SVG2,
three RAID with different views and one
Remote Alarm Unit.
Our product line for chemical, biological, radiological and nuclear detection
Nuclear & Radiation Detection
SVG 2 The new generation of nuclear radiation detectors
RAID-XP, RAID-AFM (NC version) Innovative and flexible instruments for NC detection
Biological Agent Detection
VeroTect Real-time generic biodetector
pTD Automated on-site detection of toxins
M-BL Automated on-site detection of bacterial and viral pathogens
MALDI Biotyper Software tool for reliable identification of unknown microorganisms (BWA)
Chemical Warfare Agent
Detection
MM 2 Mobile Mass Spectrometer for reconnaissance vehicles
RAID series Rapid Alarm and Identification Devices based on proven IMS technology
RAPID FT-IR Stand-off detector for atmospheric pollutants
Personal Chemical Agent
Detector
µRAID The compact, flexible and reliable personal detector
Chemical Emergencies &
Demilitarisation
E2
M Enhanced Environmental Mass Spectrometer for mobile on-site analysis
Mobile-IR Portable FT-IR Spectrometer
NIGAS System for non-invasive identification of explosives and CWA

6. Length x Width x Height
400 x 115 x 165 mm
Weight
2,9 kg
Power requirement
12 ... 32 V DC (detector module)
100 - 240 V AC / 47 -63 Hz (data and
power cable with power supply)
Temperature range
-30 – 50 °C
Radiation active source
63
Ni of 100 MBq activity (below the
European exemption limit) (370 MBq
on request)
Environmental testing
According to MIL STD 810F (US) and
DEF STAN 00-35 (UK)
Substances detectable
(List not exhaustive)
CWA’s: GA, GB, GD, GF, VX, HD,
HN, L, AC
Test substances: DPM (GSI),
MSAL (HSI)
Toxic Industrial Chemicals: CL2,
Chloride (CLX), Cyanide (CY), SO2,
Toluene diisocyanate (TDI)
Detection range
low ppb up to several ppm (substance
specific)
Battery
Length x Width x Height:
130 x 70 x 36 mm
Weight
560 g
RAID-M 100 is powered from an
integral, rechargeable lithium ion
battery pack
Spare parts
No requirement to change consumable
when RAID-M100 detects a challenge,
any consumables used are kept to a
minimum.
Dust, purge and drying filters can be
exchanged by the operator.
Technical Specifications
BrukerDaltonicsiscontinuallyimprovingitsproductsandreservestheright
tochangespecificationswithoutnotice.©BDAL06-2012CBRN#285100
Bruker Detection
Division of Bruker Daltonik GmbH
Zweigniederlassung Leipzig
Leipzig · Germany
Phone +49 (341) 2431-30
Fax +49 (341) 2431-404
sales@bdal.de
Bruker Detection
Division of
Bruker Daltonics Ltd.
Coventry · United Kingdom
Phone +44 (2476) 855-200
Fax +44 (2476) 465-317
sales@daltonics.bruker.co.uk
Bruker Detection Corp.
Billerica, MA · USA
Phone +1 (978) 663-3660
Fax +1 (978) 667-5993
ms-sales@bdal.com
www.bruker.com/cbrne