This resume summarizes Ragavan R's qualifications and work experience as a quality engineer. He has a BE degree from Annamalai University and worked in various roles ensuring quality control and assurance for automotive and manufacturing companies over 10 years. His responsibilities included inspection, auditing, monitoring quality reports, addressing customer complaints, and implementing quality management systems. Currently he works as a Quality Engineer at Myoung Shin India Automotive ensuring hardware studies, product audits, and skill matrix reporting among other responsibilities.

1. RESUME
RAGAVAN.R
966, senthamilnagar,
Thukkappet (po)
Chengam (T.K),
Thiruvannamalai (D.t) Phone: 0-9894084235
Pin: 606709 Email: Ragavan.cgm@gmail.com
Objective:-
Intend to build a carrier in a highly esteemed organization that would help me use my
technical skills and also help the organization towards achieving its goals.
EducationalQualification:-
Course Institution University/Board Year of
Completion
Percentage
of Marks
BE Annamalai University AnnamalaiUniversity 2004-2008 62.7 %
HSC GOVTBoyHr.SecSchool State Board 2004 46.25 %
SSLC Jawadhu tribal
Hr.SecSchool
State board 2002 50 %
Professionalskillset:-
• Auto CAD 2010
• Ms-office
Personaltraits:-

2. • A person with a positive attitude to handle any situation.
• Self-motivated and very eager to learn new concepts.
• Open-minded to accept mistakes and rectify them.
• A person with a effective leading capability
Project:-Analysis of fluid flow and friction factor in micro-channel
Worked experience:- I
Earlier WorkedDiscipline :-
As a QA/QC Controller. From 07.08.2008 to 14.08.2009.
10.08.2008 to 15.08.2009 worked in kaj jay forging (P) Ltd, Hosur. An ISO-
9000:2001 certified company, major customer M/S TVS motor company Ltd, Hosur&
Mysore. Supply for crank shaft, Brake padel, Lever kick starter, Gear shift lever worked
as Quality Control in automobile section.
Responsibility:-
• In-Process Inspection & Final inspection
• First piece Inspection
• Setting Approval
• MCD Report monitoring
• Gauges monitoring
Worked experience:- 2
PresentWorking Discipline:-
As a QA/QC Engineer. From 17.08.2009 to 30.10.2010.
• Ms YEKO ENTERPRISES,
#3A, Electrical &Electronic Industrial Estate,
Hosur, Tamilnadu
Responsibility:-
• Preparing Process flow, Control plan and FMEA.
• Responsible for Preparation and Maintenance of Quality reports and records
• Responsible for On-Off line inspection of RM and Finished Goods
• Responsible to address customer and vendor complaints
• Responsible for Gauges & Instruments Calibration Plan.
• Responsible for pre-inspection of raw material.

3. • Responsible for pre-inspection of dispatch of finished goods.
• Responsible to identify process defects, damages record the same on site visit.
• Maintain accurate records of all product documents
• Visit customer and understand product performance expectation
Worked experience:- 3
As a QA/QC Engineer & Assurance. From 04.11.2010 to 18.03.2012.
• CHENNAI CNC TOOL ROOM (P) LTD
F 31-34,8th
cross main road, sipcot industrial park,
Irrungattukottai, Sriperumbudur,
Chennai 602105.
Responsibility:-
• In-Process Inspection & Final inspection
• First/ mid/ last piece Inspection
• Responsible for customer Problem solve, Immediately Short team action
• Submit Revalidation Reports
• C/F calibration &Reports monitoring
• Prepare Counter measure & Submit customer end.
• Daily Rejection & Reworks Reports monitoring
• 100 PPM Reports monitoring
• Attending ISO/TS Auditing
• Prepare PPAP & Submit customer end
• Process and Product audit monitoring
• ISO/Ts audit monitoring
• QMS documents making
Worked experience:-
As a Quality Engineer from 20.05.2012 to till
 MYOUNG SHIN INDIA AUTOMOTIVE (P) LTD
NO . 496/2, Mannur village, Valarpuran (Po)

4. Sriperumbuthua (TK), Kancheepuram (DT),
Tamil Nadu-602105
Responsibility:-
 Daily Customer Issue & in-house issues related countermeasure making &
implementation.
 Daily customer issue & in-house issue discussion agenda meeting.
 Daily all Nut welding 2 hrs once audit with NC closing follow up, ( 42 machines).
 Weekly follow up Tear down report for assay.
 Daily critical check sheets & F/M/E check sheets review & monitoring.
 Daily stud weld audit (hourly once).
 All line Quality skill matrix reports & written test reports making (six month once) .
 Critical hardware study reports making.
 New hardware & m/c & new part tryout reports making.
 Critical & non critical reports monitoring.
 Monthly product audit report making
 ISIR Report making
 Sensor report & ATD & Jig clamping report monitoring
 Each shift manpower arrangement
 Revalidation report making
Co-curricular activities & extracurricular activities:
• NSS candidate at college
• NCC candidate at school level
Personaldetails:-
Father’s Name : Mr. Ramasamy.M
Date of Birth : 26th Jan 1986
Nationality : Indian
Material : Single
Languages : English, Tamil, hindi
Declaration:-
I hereby declared that above furnished information all are true and about my knowledge.

5. Place:
Date:
(RAGAVAN.R)