1. RPB 2.8V8
STANDARD ENGINE SPECIFICATION
> 72° V8 cylinder, 32-valve quad-cam
> Steel flat plane crankshaft incorporates a high flow-rate oil system
> Twin pump lubrication system
> Four scavenge pump dry sump system
> Rotary vane coolant pump
> Pre engaged starter motor
> Belt-driven 45-amp alternator
> 45mm eight-throttle body induction system
> Re-profiled camshafts
> Race ported and polished cylinder heads
> High-strength roller cam chains with adjustable sprockets
> Heavy duty cylinder studs
> Oversized cylinder barrels with Nikasil-bores
> High compression pistons
> Arrow high-strength forged steel conrods
OPTIONAL ENGINE SPECIFICATION
> Billet camshafts and adjustable valve timing
> +1mm one-piece stainless steel race valves
> Race valve springs and titanium retainers
> Race ported and polished cylinder heads with +1mm valve seats
> Cosworth high compression two-ring pistons
DIMENSIONS
> Length 546mm
> Width 513mm
> Height 440mm
> Dry weight 88kg (194lb)
> Max revs 10500rpm
> Bore 84mm
> Stroke 63mm
> Compression ratio 13.5:1
Max Power = 373.95bhp Max Torque = 211.99ft-Ibs
Note: Power figures quoted above are measured at the rear wheels, using the RPE rolling road.