R.D Mould & Industries, established in 1999, is a reputable plastic mould manufacturer based in Ahmedabad, India, specializing in various mould types, including disposable items and industrial parts. The company prides itself on its quality infrastructure, skilled workforce, and commitment to timely delivery and customer service, offering customization and after-sale support. With a vision to be a leading customer-centric organization, R.D Mould & Industries aims to provide comprehensive solutions for mould and die requirements while ensuring cost-effectiveness and client satisfaction.

1. About Us
R.D mould & Industries was established in 1999. After over 20 years of hard work, R.D mould
& Industries has grown to be one of the highest reputable mould makers with well-equipped tool
room with precision VMC, CNC milling machines, highly skilled and dedicated workforce backed up
with skilled product designers, machinists, programmers, enable us to manufacture high quality
plastic mould and deliver in time.

2. R.D mould & Industries is located in Ahmedabad, Gujarat, India. We are one of the prime
plastic mould manufacturers for all types of disposable spoon mould, food containers household
articles, Pharmaceutical items , industrial parts , agriculture items etc.
With the guidance and assistance of our mentor Mr. Rajesh Dudhat, We have a very
impressive, long associated customer base spread all across India and worldwide. We export Moulds
to customers in Asian Countries, Gulf countries and Africa continent.
Our Infrastructure
According to our vast experience we have established well infrastructural base which is
associated with highly advance amenities. Our infrastructural base is spread into units like Quality
Assurance, R & D, Production, Administration, marketing & Sales etc. we also have an unit for new
comer who wants to embark new business our unit help them to provide all guidance about
preferable machineries and material and its availabilities we also help them to provide short time
training session like how to operate machine and maintain it
Mould Making Process
As a good reputed manufacturer in India, we share the basic injection mould making process
in our company
EVALUATION
1. Product design department provides product information to injection mould design
department, injection mould designers complete cost analysis in two working days, and
provide to R & D manager
2. R & D department release “Mould Making Apply “to plastic injection mould design
department after confirmed the project.
3. Injection mould designers organize relevant personnel to review the project base on the
product information, including product structure, mould structure, cooling system runner,
slang, venting, etc.
MOULD DESIGN
4. After evaluation, injection mould designer begin to design the plastic injection mould,
including 3D drawing correction, 3D parting , mould parts assembly drawing , EDM Drawing

3. Electrode Drawing etc., and organize relevant personnel to evaluate those drawings , then
issue to plastic injection mould making department.
MATERIAL ORDER
5. Injection mould makers evaluate and study the drawings, and order mould materials if there
is no objection, otherwise communicate with the plastic injection mould designers.
MATERIAL INSPECTION
6. Injection mould maker inspect the mould materials in time after the material arrive to the
factory, and arrange technicians to do locksmith works, include turning , grinding, milling ,
screw holes, water carrying hole, center hole,
VMC WORK
7. After material inspection next step would be VMC machining we have high precision VMC
Machines. The technician pay attention to the precision of each right angle sides, avoid
empty of the center hole and each production base.
PRE TRIAL PROCESS
8. In tryout, injection mold designers ,plastic mould makers and other personnel should go to
the site , making analysis and solution of abnormal in tryout, and fill mold “Tryout Report”
While tryout cycle time the products are defect-free
Our creative team is pay attention to minimize all common molding defects as as below
Keep these factors in mind when designing your injection moulded part, and remember that it is easier to avoid
problems in the beginning than change your design down the line.
Molding Defects
Alternative
Name
Descriptions Causes
Blister Blistering
Raised or layered zone on
surface of the Plastic part
Tool or material is too hot, often caused by a lack of cooling
around the tool or a faulty heater
Burn marks
Air Burn/Gas
Burn
Black or brown burnt
areas on the plastic part
located at furthest points
from gate
Tool lacks venting, injection speed is too high

4. Color streaks (US) Localized change of color
Plastic material and colorant isn't mixing properly, or the
material has run out and it's starting to come through as
natural only
Delamination
Thin mica like layers
formed in part wall
Contamination of the material e.g. PP mixed with ABS, very
dangerous if the part is being used for a safety critical
application as the material has very little strength when
delaminated as the materials cannot bond
Flash Burrs
Excess material in thin
layer exceeding normal
part geometry
Tool damage, too much injection speed/material injected and
clamping force too low. Can also be caused by dirt and
contaminants around tooling surfaces.
Embedded
contaminates
Embedded
particulates
Foreign particle (burnt
material or other)
embedded in the part
Particles on the tool surface, contaminated material or foreign
debris in the barrel, or too much shear heat burning the
material prior to injection
Flow marks Flow lines
Directionally "off tone"
wavy lines or patterns
Injection speeds too slow (the plastic has cooled down too
much during injection, injection speeds must be set as fast as
you can get away with at all times)
Jetting
Deformed part by turbulent
flow of material
Poor tool design, gate position or runner. Injection speed set
too high.
Polymer degradation
polymer breakdown from
oxidation, etc.
Excess water in the granules, excessive temperatures in
barrel
Sink marks
Localized depression
(In thicker zones)
Holding time/pressure too low, cooling time too short, with
sprueless hot runners this can also be caused by the gate
temperature being set too high
Short shot
Non-Fill/Short
Mold
Partial part Lack of material, injection speed or pressure too low
Splay marks
Splash
Mark/Silver
Streaks
Circular pattern around
gate caused by hot gas
Moisture in the material, usually when resins are dried
improperly
Stringiness Stringing
String like remain from
previous shot transfer in
new shot
Nozzle temperature too high. Gate hasn't frozen off
Voids
Empty space within part
(Air pocket)
Lack of holding pressure (holding pressure is used to pack out
the part during the holding time). Also mold may be out of
registration (when the two halves don't centre properly and
part walls are not the same thickness).
Weld line
Knit Line/Meld
Line
Discoloured line where
two flow fronts meet
Mold/material temperatures set too low (the material is cold
when they meet, so they don't bond)
Warping Twisting Part Distorted part
Cooling is too short, material is too hot, lack of cooling around
the tool, incorrect water temperatures (the parts bow inwards
towards the hot side of the tool)

5. OUR COMMITMENT
Baked by a state of the art infrastructure facility, we are able to meet the qualitative and
quantitative demands of our valuable clients. We use all entire available resources in
efficient manners in order to minimize the production cost. Owning to our transparent
bossiness dealing and timely delivery of consignments, we have been able to gain the trust
of our honorable customers. Our entire team is committed to deliver order in time.
OUR VISION
We look forward for the providing one-stop solution to all the mould and die requirements.
Achieve business growth through customer satisfaction by providing reliable business association in
each and every step, mentioned above, keeping I mind quality work, timely response and cost
effectiveness.
Our vision to be world’s most customer centric company to build a place where people can come to
find and discover anything they might want in injection mould.
CUSTOMIZATION AND AFTER SALE SUPPORT
We strive to attain satisfaction of our client. So, we are efficaciously equipped with all the
necessary facilities that are vital to offer the customization service. We design and develop our
products as per the specifications of our clients. We offer our products with the assurance of
genuine quality and performance.
In additional to these, we also provide after sale support to our clients. In this , we provide
efficient training to embark new business and also help our client to set up new business by
providing the guidance of preferable machines , material, operating tips and how to maintain it.
Why Us?
Owing to our offered excellent quality products, we have become the foremost choice
of our esteemed clients. Some of the noticeable factors we have which we have gained a prominent
position in the industry are as follows:

6. • Skillful team of professional
• Advance infrastructure
• Timeliness
• Affordable rates
• Transparent dealing
• Prompt delivery
BASIC INFORMATION
Nature of Business Manufacturer
Additional Business Trader
Company Owner Mr. Rajesh Dudhat
Register Address 34, Arihant Estate, Odhav Ring Road,
Odhav-Kathwada,
Ahmedabad-382415 (Gujarat)
Total Number of Employees 20 Peoples
Year of Establishment 1999
Legal Status of Firm Proprietorship Firm
Annual Turn Over Rs. 50Lakh – 1 Crore
GST NO
CONTACT US
R.D MOULD & INDUSTRIES
34, Arihant Estate,
Odhav Ring Road Circle,
Odhav- Kathwada,
Ahmedabad-382415.
+91 9377761062