Ptek BOF1 HF
•
0 likes•87 views
Suitable for cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries, high frequency technology, compact design, protected from wrong polarity and short circuit proof, feeding 110/240V. IP-66 degree (No ingress of dust; complete protection against contact - dust tight, water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects).
Report
Share
Report
Share
Download to read offline
Recommended
Marine Slip Rings
Product Features: JINPAT precision slip rings have been widely applied in shipborne and shore-based military and civilian equipments, such as marine surveillance ship air defense radar, coastal shore-based monitoring platform, shell launcher, underwater robot, marine propulsion system, marine crane, etc. Marine slip ring is required to have a stable performance, over-long lifetime, easy maintenance. It also needs to meet special requirements for different applications, such as high protection class, high/low temperature resistance (-55℃ to +120℃), anti-salt fog, shake-proof, shock resistance, high pressure resistance, low electric noise (less than 5 mΩ), isolation more than 60 dB, ultra-low signal transmission loss, etc.
Typical Applications: marine crane slewing center, drilling platform.
StripDrip- Water leak sensor- Z-Wave- Sensitive
This document provides instructions for a multi-sensor magnet strips product. It includes a list of numbered items, likely the contents of the package. It also includes a website for video instructions and product information as well as a serial number. The document gives the essential information needed to use the product but does not provide many details.
Falcon on board 2016 ituk fn
IMPIEGO: Carica adatta per la ricarica ciclica di batterie al piombo e/o carica di mantenimento di batterie al gel e/o al piombo
APPLICATION: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries.
• Tecnologia ad alta frequenza. • Ingresso 110/240V monofase ± 10%. • Impermeabile • Compatto • Grado di protezione IP-66 • Protezione da inversione di polarità • Protezione da corto circuito
• Switching battery charger with high frequency technology. • Feeding 110/240V single-phase ± 10%. • Waterproof • Space saving • IP-66 degree • Protection from wrong polarity • Short circuit proof
Biostar news letter porvair science issued on january 2013
Porvair Sciences manufactures a wide range of microplate products for applications in life sciences, biotechnology, research and development, and molecular biology. Their product line includes vacuum manifolds, sealers, evaporators, deep well plates, storage plates, assay plates, luminescence plates, liquid handling reservoirs, and other microplate solutions. This document is a newsletter from Porvair Sciences about their microplate products that was distributed by Biostar Lifetech in January 2013.
Pool alarms
Pool safety is one of the major concerns for pool owners. Therefore, you should install pool alarm in your pool. It works as a safety tool for by alerting you about any disturbance in your pool. It also detects small children. Before buying pool alarm, there are some important things which you should know. To know more about these things and another information about pool alarms, go through this presentation.
Ptek HB1
Advantages of HF technology: Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched. The HF technology provides: compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy, reduction of the batteries temperature during the cycle, strong reduction of the Co2 emissions, lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode, customized charge curve on request. Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery. Usage: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries. Optional Air pump available Download data available trough PC/Laptop
Cursus Het klassieke ideaal in de kunst - Ut pictua poesis. De beeldende kun...
Cursus van Artetcetera over het Klassieke ideaal in de kunst (1400-1900). Les door Michiel Kersten over de opleidingen over de emancipatie van de beeldende kunsten en de kunstenaar tot het domein en niveau van de vrije kunsten. Daarbij baseerden kunstenaars en kunsttheoretici zich op het idee dat schilderkunst en dichtkunst vergelijkbaar zijn. Daarmee konden kunstenaars de klassieke theorieën over de dichtkunst van Aristoteles en Horatius gebruiken en toepassen. Dit leidde tot een verhoging van de status van de beeldende kunst. 18 februari 2016. Les vier.
NY ROCK BolshoiJack
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Recommended
Marine Slip Rings
Product Features: JINPAT precision slip rings have been widely applied in shipborne and shore-based military and civilian equipments, such as marine surveillance ship air defense radar, coastal shore-based monitoring platform, shell launcher, underwater robot, marine propulsion system, marine crane, etc. Marine slip ring is required to have a stable performance, over-long lifetime, easy maintenance. It also needs to meet special requirements for different applications, such as high protection class, high/low temperature resistance (-55℃ to +120℃), anti-salt fog, shake-proof, shock resistance, high pressure resistance, low electric noise (less than 5 mΩ), isolation more than 60 dB, ultra-low signal transmission loss, etc.
Typical Applications: marine crane slewing center, drilling platform.
StripDrip- Water leak sensor- Z-Wave- Sensitive
This document provides instructions for a multi-sensor magnet strips product. It includes a list of numbered items, likely the contents of the package. It also includes a website for video instructions and product information as well as a serial number. The document gives the essential information needed to use the product but does not provide many details.
Falcon on board 2016 ituk fn
IMPIEGO: Carica adatta per la ricarica ciclica di batterie al piombo e/o carica di mantenimento di batterie al gel e/o al piombo
APPLICATION: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries.
• Tecnologia ad alta frequenza. • Ingresso 110/240V monofase ± 10%. • Impermeabile • Compatto • Grado di protezione IP-66 • Protezione da inversione di polarità • Protezione da corto circuito
• Switching battery charger with high frequency technology. • Feeding 110/240V single-phase ± 10%. • Waterproof • Space saving • IP-66 degree • Protection from wrong polarity • Short circuit proof
Biostar news letter porvair science issued on january 2013
Porvair Sciences manufactures a wide range of microplate products for applications in life sciences, biotechnology, research and development, and molecular biology. Their product line includes vacuum manifolds, sealers, evaporators, deep well plates, storage plates, assay plates, luminescence plates, liquid handling reservoirs, and other microplate solutions. This document is a newsletter from Porvair Sciences about their microplate products that was distributed by Biostar Lifetech in January 2013.
Pool alarms
Pool safety is one of the major concerns for pool owners. Therefore, you should install pool alarm in your pool. It works as a safety tool for by alerting you about any disturbance in your pool. It also detects small children. Before buying pool alarm, there are some important things which you should know. To know more about these things and another information about pool alarms, go through this presentation.
Ptek HB1
Advantages of HF technology: Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched. The HF technology provides: compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy, reduction of the batteries temperature during the cycle, strong reduction of the Co2 emissions, lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode, customized charge curve on request. Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery. Usage: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries. Optional Air pump available Download data available trough PC/Laptop
Cursus Het klassieke ideaal in de kunst - Ut pictua poesis. De beeldende kun...
Cursus van Artetcetera over het Klassieke ideaal in de kunst (1400-1900). Les door Michiel Kersten over de opleidingen over de emancipatie van de beeldende kunsten en de kunstenaar tot het domein en niveau van de vrije kunsten. Daarbij baseerden kunstenaars en kunsttheoretici zich op het idee dat schilderkunst en dichtkunst vergelijkbaar zijn. Daarmee konden kunstenaars de klassieke theorieën over de dichtkunst van Aristoteles en Horatius gebruiken en toepassen. Dit leidde tot een verhoging van de status van de beeldende kunst. 18 februari 2016. Les vier.
NY ROCK BolshoiJack
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Resolución 05 2013 tricel
La resolución establece las fechas y procedimientos para las elecciones del centro de estudiantes de Química y Farmacia. Se fija el 15 de mayo como día de votación de 10 a 12:45 horas y de 14 a 17:30 horas en el Hall de la Biblioteca Central. Los estudiantes de pregrado podrán votar mostrando su carnet o credencial universitaria y firmando en la nómina. En la papeleta deberán aprobar o no la lista "A" para el centro de estudiantes para el periodo 2013.
18081 proyecto pedagógico me divierto con las matemáticas esc urb timotea men...
El documento describe un proyecto pedagógico en una escuela primaria en Colombia que busca mejorar el desempeño de los estudiantes en matemáticas mediante el uso de recursos digitales. El proyecto utilizará software educativo y contenido digital para enseñar sumas, restas y multiplicaciones a los estudiantes de segundo grado. Se espera que las actividades lúdicas con tecnología motiven a los estudiantes y fortalezcan sus habilidades matemáticas fundamentales.
VFF
The document discusses Litre Meter's VFF rotary piston positive displacement flowmeters. It provides details on the various models of flowmeters including materials of construction, pressure and temperature ratings, flow ranges and accuracy. The flowmeters can handle a wide variety of fluids and are available with different output and mounting options to suit various applications.
Actividad 3.1 tegnologia educativa
Este documento presenta un resumen de un proyecto sobre el tema de grooming u acoso sexual utilizando las tecnologías de la información y la comunicación. El documento define grooming como estrategias usadas por adultos para ganarse la confianza de menores a través de mentiras en Internet con el objetivo de obtener imágenes sexuales o encontrarse. Explica que el acoso también puede ocurrir a través del teléfono móvil y advierte sobre los peligros de compartir información personal o fotos en línea. La conclusión es que el acoso sexual es
Corporate Presentation Q3 2014
This document is a corporate presentation for Swedbank that provides an overview of the bank. It summarizes that Swedbank aims to be accessible to customers and promote financial stability. It operates in Sweden, Estonia, Latvia, and Lithuania with over 14,000 employees. The presentation gives an overview of Swedbank's purpose, finances, markets, history, values, and services provided to private individuals, corporations, and other sectors.
English live slide show
This document provides information about EnglishLive, an online English language learning platform. It summarizes that EnglishLive was founded by Rosally Daniel, Andre Bodowski, and Nakia Jawara to provide global English language instruction using online technologies. It aims to make English learning affordable and accessible anywhere through virtual classrooms taught by certified American teachers. The business plan projects strong revenue growth potential based on the large market demand for English learning globally and low costs of the online business model.
Smartphones y tabletas en la educacion
Este documento describe las características y sistemas operativos de smartphones, tabletas y Chromebooks, así como sus usos educativos potenciales. Explica las opciones de Android, iOS, Windows y BlackBerry para smartphones, y Android, iOS y Windows para tabletas. También discute factores a considerar al elegir un dispositivo, como el precio, almacenamiento y compatibilidad. Finalmente, enumera varias aplicaciones educativas populares para estas plataformas.
Diretório Nacional de Catequese (Capítulo 4 CATEQUESE: MENSAGEM E CONTEÚDO)
O documento discute as principais fontes da catequese cristã: a Palavra de Deus, a liturgia e o Catecismo. Ele enfatiza a centralidade de Jesus Cristo e da mensagem do Reino de Deus na catequese. Além disso, destaca a importância da leitura orante da Bíblia e da formação de pequenas comunidades cristãs.
Ptek HB3
Advantages of HF technology: Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched. The HF technology provides: compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy, reduction of the batteries temperature during the cycle, strong reduction of the Co2 emissions, lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode, customized charge curve on request. Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery. Usage: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries. Optional Air pump available Download data available trough PC/Lapto
Ptek RCHF3
The benefits of PteK RCHF3 PteK RCHF3 charger is the faster and safer method to recharge batteries in 2 hours. In fact you do not need any dedicated battery room any more, you also can avoid all the relative maintenance problems and the time recovery, this means less costs for maintenance and infrastructures and less battery packs. Excellent also with batteries having a big capacity you can quickly charge in short time, as during the lunch time or when the vehicle is in standby. so you don’t have to replace batteries in order to increase the work time.
The three-phase PteK RCHF is realized with full switching technology with microcontroller digital control, it is a flexible and reliable devices. The high efficiency assures a remarkable energy saving optimizing the economic benefits permitting to amortize the investment for the high frequency choice in a short time. It is also suitable for recharge all kind of batteries (leadacid gel, sealed, AGM batteries, etc…) and allow selecting a specific charge curve or configuring easily a suitable curve for the type of battery. PteK RCHF is characterized by a negligible residual output ripple, it also integrate the input and output protections and is equipped with an over-temperature control both on the primary side and the secondary side of the converter. With a wholly programmable control unit, easy-to-use with the user-friendly graphic interface displaying all the parameters, historical data of the charge cycles executed, alarms, data plate and all general information concerning the device. The interface also allows setting all the charge parameters, selecting the charge curves, setting the clock and activating all the optional functions. PteK RCHF is equipped with a monochromatic graphic LCD display of 64x128 pixels.
The control unit can be connect it to a personal computer. An interface software for PC is available permitting a whole configuration of the PteK RCHF, in order to check and monitor all the functions in real time. The software is equipped with a specific tool for the charge curve configuration and customization.
Input Voltage: 400 Vca ± 15% three-phase, input Frequency: 50 – 60 Hz, efficiency: ~ 90%, operating temperature: – 20 to + 50 °C, current drawn by the Battery: 0 A, if network electrically bonded, protection against Output Short-circuit, protection against polarity reversal, thermal Protection Semi-conductors, input Protection, charge curve: programming and settings, displaying and messages with monochromatic graphic LCD display, thermal compensation with optional probe, ventilation with forced air circulation, metallic body with these dimensions: 830 x 500 x 500 mm, protection IP20, in conformity with the Low Voltage directive 73/23/ CEE and the EMC and directive 89/336/CEE and their successive amendments.
Ptek NRE3
Ptek NRE3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V-400V three-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V – 48V, 220V coil three-pole contactor, d.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, automatic equalized charg, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic):9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard color: RAL 5003 BLUE, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek NR3
Ptek NR3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230-400V three-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V - 48V - 72V – 80V, 220V coil three-pole contactor, D.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard colour: RAL 5003 Blue, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek TC3
Ptek TC3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 3x400V three-phase supply (with possibility to request voltages, different from the standard ones), adjustable to ± 5% or ± 10%, microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery, 230V coil threepole contactor, D.C. fuse on rectifier output, delta-star stray flux three-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature, three-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection, mains input and d.c. output polarized cables, modular installation on galvanized steel base, sheet steel case with modular panels so as to assure maximum accessibility in case of service, epoxy powder coating, oven-baked, standard colour: RAL 5003 blue, new lexan plate with charging data very easy to understand, equalized recall push button, ON - OFF push button, option to adjust the charging time from 90 to 210 minutes, option to adjust the threshold voltage from 2.3 to 2.4 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, option: custom-made color, logo and silk-screen printing, option: assembly of plugs and battery connectors on request.
Ptek TC1
Ptek TC1 single phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V Single-phase supply (with possibility to request voltages, different from the standard ones), adjustable to ± 5% or ± 10%, microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery, 230V coil Single-pole contactor, D.C. fuse on rectifier output, delta-star stray flux Single-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature, single-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection, mains input and d.c. output polarized cables, modular installation on galvanized steel base, sheet steel case with modular panels so as to assure maximum accessibility in case of service, epoxy powder coating, oven-baked, standard colour: RAL 5003 blue, new lexan plate with charging data very easy to understand, equalized recall push button, ON - OFF push button, option to adjust the charging time from 90 to 210 minutes, option to adjust the threshold voltage from 2.3 to 2.4 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, option: custom-made color, logo and silk-screen printing, option: assembly of plugs and battery connectors on request.
Ptek RVHF1
Cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries. New refined design, high frequency technology (high yield product >87%): direct current charges -> short time, also with energy supply net with oscillation, small dimensions, light weight in comparison with the 50 Hz traditional technology. With the IUo floating charge it is possible to recharge any kind of battery (open lead or gel battery by means of just an only battery charger). You can select between the classic version with load status indication plus battery level by multitasking LED, the other one is equipped with an digit LCD display which showing you all basic charge parameters. (voltage – current – time – reintegrated Ah – total charging time – use time) PteK RVHF can be used with nominal supply voltage of 110V and/or 220V as default. Each PteK RVHF battery charger is equipped with external aluminium cover box, input cable and battery cables (for small one equipped with a fast connection crocodile).
Switching battery charger high frequency technology, Feeding 100 ÷ 240V singlephase +- 10%, Digital display only for D version, different charging curves selectable for Pb-Acid, GEL, “Soft start” mode, Electronic protection and/or fuse against short circuits over voltages, polarity reversal or anomalies, input cable, connection of the battery included, Inner self contained ventilation through forced air, efficiency > 85%, Mass-produced mains leads.
Ptek NR1
Ptek NR1 single phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V single-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V - 48V - 72V – 80V, 220V coil three-pole contactor, D.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard colour: RAL 5003 Blue, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek NF1S-NFM-NFC
NF1S Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, Mass-produced mains leads, input cable, connection to the battery through Anderson-Rema power terminals.
NFM Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, Mass-produced mains leads, input cable, connection to the battery through Anderson-Rema power terminals.
NFC Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, error code display missing, mass-produced input network cable, output cables polarized.
Ptek NF PFC
NF PFC is suitable for the cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries, using our devices is very easy, thanks also to the programmed characteristic curves and to the intuitive control display, our device allows the user to save energy, contribute to significantly reduce CO2 emissions and support the “GOO Green Logistics” concept. NF PFC means very high quality, in fact our recharge systems are submitted to many tests by our techincal team and are guaranteed with high reliability. The active filter PFC allows to charge batteries perfectly and to extend their life up to 25%, with a power factor equal to 0,90, therefore the high level of efficiency allows to reduce the charging time and the energy costs up to 30%, all these values and functions are displayed on the control panel, which is easy to read and equipped with intuitive controls.
Technical Characteristics of NF PFC switching battery charger with high frequency technology, fully controlled by microprocessor, feeding 240V single-phase +- 10%, lexan luminous display with an easy reading of the charging parameters, different charging curves in accordance with the specific details of the battery, choose among 16 standard curves, preprogrammed and valid for Pb-Acid, GEL, battery voltage and charge current changing through the button in the front panel, “Soft start” mode, charging cycle displaying through the led in the front panel, electronic protection and/or fuse against short circuits over voltages, polarity reversal and anomalies (error code of any anomaly, fault warning by alphanumeric display), inner self contained ventilation through forced air, efficiency > 0,90%, mass-produced mains leads, protection against overheating, displayed charge current, battery tension, charging time (delivered charge expressed in Ah, and the absorbed electricity expressed in kWh).
Ptek BC1 YE1
Ptek BC1 and Ptek YE1 battery chargers (both single-phase) are designed to recharge medium capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. Ptek BC1 single phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, electronic control provided with final charge timer, rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer: TENVEX copper windings with double enamel insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, epoxy powder coating, oven-baked, standard color: RAL 5003 blue, lexan plate with charging data very easy to understand, equalization recall push button, ON - OFF push button, option to adjust the charging time, option to adjust the threshold voltage from 2.35 to 2.45 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color and logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request. Ptek YE1 single-phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, Electronic control provided with final charge timer, ON-OFF switch, Rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer : TENVEX copper windings with double enamel, insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, Epoxy powder coating, oven-baked, Standard color: RAL 5003 blue, New lexan plate with charging data very easy to understand, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color, custom-made logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request
Ptek bc1 ye1
Ptek BC1 and Ptek YE1 battery chargers (both single-phase) are designed to recharge medium capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. Ptek BC1 single phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, electronic control provided with final charge timer, rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer: TENVEX copper windings with double enamel insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, epoxy powder coating, oven-baked, standard color: RAL 5003 blue, lexan plate with charging data very easy to understand, equalization recall push button, ON - OFF push button, option to adjust the charging time, option to adjust the threshold voltage from 2.35 to 2.45 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color and logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request. Ptek YE1 single-phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, Electronic control provided with final charge timer, ON-OFF switch, Rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer : TENVEX copper windings with double enamel, insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, Epoxy powder coating, oven-baked, Standard color: RAL 5003 blue, New lexan plate with charging data very easy to understand, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color, custom-made logo and silk-screen printing, complete with mains a
More Related Content
Viewers also liked
Resolución 05 2013 tricel
La resolución establece las fechas y procedimientos para las elecciones del centro de estudiantes de Química y Farmacia. Se fija el 15 de mayo como día de votación de 10 a 12:45 horas y de 14 a 17:30 horas en el Hall de la Biblioteca Central. Los estudiantes de pregrado podrán votar mostrando su carnet o credencial universitaria y firmando en la nómina. En la papeleta deberán aprobar o no la lista "A" para el centro de estudiantes para el periodo 2013.
18081 proyecto pedagógico me divierto con las matemáticas esc urb timotea men...
El documento describe un proyecto pedagógico en una escuela primaria en Colombia que busca mejorar el desempeño de los estudiantes en matemáticas mediante el uso de recursos digitales. El proyecto utilizará software educativo y contenido digital para enseñar sumas, restas y multiplicaciones a los estudiantes de segundo grado. Se espera que las actividades lúdicas con tecnología motiven a los estudiantes y fortalezcan sus habilidades matemáticas fundamentales.
VFF
The document discusses Litre Meter's VFF rotary piston positive displacement flowmeters. It provides details on the various models of flowmeters including materials of construction, pressure and temperature ratings, flow ranges and accuracy. The flowmeters can handle a wide variety of fluids and are available with different output and mounting options to suit various applications.
Actividad 3.1 tegnologia educativa
Este documento presenta un resumen de un proyecto sobre el tema de grooming u acoso sexual utilizando las tecnologías de la información y la comunicación. El documento define grooming como estrategias usadas por adultos para ganarse la confianza de menores a través de mentiras en Internet con el objetivo de obtener imágenes sexuales o encontrarse. Explica que el acoso también puede ocurrir a través del teléfono móvil y advierte sobre los peligros de compartir información personal o fotos en línea. La conclusión es que el acoso sexual es
Corporate Presentation Q3 2014
This document is a corporate presentation for Swedbank that provides an overview of the bank. It summarizes that Swedbank aims to be accessible to customers and promote financial stability. It operates in Sweden, Estonia, Latvia, and Lithuania with over 14,000 employees. The presentation gives an overview of Swedbank's purpose, finances, markets, history, values, and services provided to private individuals, corporations, and other sectors.
English live slide show
This document provides information about EnglishLive, an online English language learning platform. It summarizes that EnglishLive was founded by Rosally Daniel, Andre Bodowski, and Nakia Jawara to provide global English language instruction using online technologies. It aims to make English learning affordable and accessible anywhere through virtual classrooms taught by certified American teachers. The business plan projects strong revenue growth potential based on the large market demand for English learning globally and low costs of the online business model.
Smartphones y tabletas en la educacion
Este documento describe las características y sistemas operativos de smartphones, tabletas y Chromebooks, así como sus usos educativos potenciales. Explica las opciones de Android, iOS, Windows y BlackBerry para smartphones, y Android, iOS y Windows para tabletas. También discute factores a considerar al elegir un dispositivo, como el precio, almacenamiento y compatibilidad. Finalmente, enumera varias aplicaciones educativas populares para estas plataformas.
Diretório Nacional de Catequese (Capítulo 4 CATEQUESE: MENSAGEM E CONTEÚDO)
O documento discute as principais fontes da catequese cristã: a Palavra de Deus, a liturgia e o Catecismo. Ele enfatiza a centralidade de Jesus Cristo e da mensagem do Reino de Deus na catequese. Além disso, destaca a importância da leitura orante da Bíblia e da formação de pequenas comunidades cristãs.
Ptek HB3
Advantages of HF technology: Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched. The HF technology provides: compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy, reduction of the batteries temperature during the cycle, strong reduction of the Co2 emissions, lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode, customized charge curve on request. Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery. Usage: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries. Optional Air pump available Download data available trough PC/Lapto
Viewers also liked (11)
18081 proyecto pedagógico me divierto con las matemáticas esc urb timotea men...
18081 proyecto pedagógico me divierto con las matemáticas esc urb timotea men...
Diretório Nacional de Catequese (Capítulo 4 CATEQUESE: MENSAGEM E CONTEÚDO)
Diretório Nacional de Catequese (Capítulo 4 CATEQUESE: MENSAGEM E CONTEÚDO)
More from Ptek srl
Ptek RCHF3
The benefits of PteK RCHF3 PteK RCHF3 charger is the faster and safer method to recharge batteries in 2 hours. In fact you do not need any dedicated battery room any more, you also can avoid all the relative maintenance problems and the time recovery, this means less costs for maintenance and infrastructures and less battery packs. Excellent also with batteries having a big capacity you can quickly charge in short time, as during the lunch time or when the vehicle is in standby. so you don’t have to replace batteries in order to increase the work time.
The three-phase PteK RCHF is realized with full switching technology with microcontroller digital control, it is a flexible and reliable devices. The high efficiency assures a remarkable energy saving optimizing the economic benefits permitting to amortize the investment for the high frequency choice in a short time. It is also suitable for recharge all kind of batteries (leadacid gel, sealed, AGM batteries, etc…) and allow selecting a specific charge curve or configuring easily a suitable curve for the type of battery. PteK RCHF is characterized by a negligible residual output ripple, it also integrate the input and output protections and is equipped with an over-temperature control both on the primary side and the secondary side of the converter. With a wholly programmable control unit, easy-to-use with the user-friendly graphic interface displaying all the parameters, historical data of the charge cycles executed, alarms, data plate and all general information concerning the device. The interface also allows setting all the charge parameters, selecting the charge curves, setting the clock and activating all the optional functions. PteK RCHF is equipped with a monochromatic graphic LCD display of 64x128 pixels.
The control unit can be connect it to a personal computer. An interface software for PC is available permitting a whole configuration of the PteK RCHF, in order to check and monitor all the functions in real time. The software is equipped with a specific tool for the charge curve configuration and customization.
Input Voltage: 400 Vca ± 15% three-phase, input Frequency: 50 – 60 Hz, efficiency: ~ 90%, operating temperature: – 20 to + 50 °C, current drawn by the Battery: 0 A, if network electrically bonded, protection against Output Short-circuit, protection against polarity reversal, thermal Protection Semi-conductors, input Protection, charge curve: programming and settings, displaying and messages with monochromatic graphic LCD display, thermal compensation with optional probe, ventilation with forced air circulation, metallic body with these dimensions: 830 x 500 x 500 mm, protection IP20, in conformity with the Low Voltage directive 73/23/ CEE and the EMC and directive 89/336/CEE and their successive amendments.
Ptek NRE3
Ptek NRE3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V-400V three-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V – 48V, 220V coil three-pole contactor, d.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, automatic equalized charg, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic):9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard color: RAL 5003 BLUE, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek NR3
Ptek NR3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230-400V three-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V - 48V - 72V – 80V, 220V coil three-pole contactor, D.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard colour: RAL 5003 Blue, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek TC3
Ptek TC3 three phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 3x400V three-phase supply (with possibility to request voltages, different from the standard ones), adjustable to ± 5% or ± 10%, microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery, 230V coil threepole contactor, D.C. fuse on rectifier output, delta-star stray flux three-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature, three-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection, mains input and d.c. output polarized cables, modular installation on galvanized steel base, sheet steel case with modular panels so as to assure maximum accessibility in case of service, epoxy powder coating, oven-baked, standard colour: RAL 5003 blue, new lexan plate with charging data very easy to understand, equalized recall push button, ON - OFF push button, option to adjust the charging time from 90 to 210 minutes, option to adjust the threshold voltage from 2.3 to 2.4 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, option: custom-made color, logo and silk-screen printing, option: assembly of plugs and battery connectors on request.
Ptek TC1
Ptek TC1 single phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V Single-phase supply (with possibility to request voltages, different from the standard ones), adjustable to ± 5% or ± 10%, microprocessor-controlled programming and measuring via digital gearcase. Such microprocessor control is designed to optimize the charging cycles for any type of battery, 230V coil Single-pole contactor, D.C. fuse on rectifier output, delta-star stray flux Single-phase power transformer class H; impregnated in autoclave with ecological epoxy resins, with thermocouples for disconnection due to maximum temperature, single-phase rectifier bridge with silicon diodes, natural cooling, with snubber protection, mains input and d.c. output polarized cables, modular installation on galvanized steel base, sheet steel case with modular panels so as to assure maximum accessibility in case of service, epoxy powder coating, oven-baked, standard colour: RAL 5003 blue, new lexan plate with charging data very easy to understand, equalized recall push button, ON - OFF push button, option to adjust the charging time from 90 to 210 minutes, option to adjust the threshold voltage from 2.3 to 2.4 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, option: custom-made color, logo and silk-screen printing, option: assembly of plugs and battery connectors on request.
Ptek RVHF1
Cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries. New refined design, high frequency technology (high yield product >87%): direct current charges -> short time, also with energy supply net with oscillation, small dimensions, light weight in comparison with the 50 Hz traditional technology. With the IUo floating charge it is possible to recharge any kind of battery (open lead or gel battery by means of just an only battery charger). You can select between the classic version with load status indication plus battery level by multitasking LED, the other one is equipped with an digit LCD display which showing you all basic charge parameters. (voltage – current – time – reintegrated Ah – total charging time – use time) PteK RVHF can be used with nominal supply voltage of 110V and/or 220V as default. Each PteK RVHF battery charger is equipped with external aluminium cover box, input cable and battery cables (for small one equipped with a fast connection crocodile).
Switching battery charger high frequency technology, Feeding 100 ÷ 240V singlephase +- 10%, Digital display only for D version, different charging curves selectable for Pb-Acid, GEL, “Soft start” mode, Electronic protection and/or fuse against short circuits over voltages, polarity reversal or anomalies, input cable, connection of the battery included, Inner self contained ventilation through forced air, efficiency > 85%, Mass-produced mains leads.
Ptek NR1
Ptek NR1 single phase is designed to recharge medium - large capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. 230V single-phase supply - adjustable ± 5% with possibility to request voltage different from the standard ones, microprocessor control with dip-switch programmable gearcase 24V - 36V - 48V - 72V – 80V, 220V coil three-pole contactor, D.C. fuse on rectifier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, standard colour: RAL 5003 Blue, option: custom-made color, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request.
Ptek NF1S-NFM-NFC
NF1S Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, Mass-produced mains leads, input cable, connection to the battery through Anderson-Rema power terminals.
NFM Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, Mass-produced mains leads, input cable, connection to the battery through Anderson-Rema power terminals.
NFC Switching battery charger, high frequency technology, fully controlled by microprocessor. 240V single-phase +- 10%, Luminous display for a easy reading of the charging parameters. Different charging curves in accordance with the kind of battery and choose among 16 standard curves, preprogrammed valid for Pb-Acid, GEL. Battery voltage and charge current can be changed through the button in the front panel. “Soft start” mode and display of the charging cycle with led . Electronic protection and/or fuse against short circuits over voltages, polarity reversal, anomalies. Error code of any anomaly, Inner self ventilation through forced air, efficiency > 85%, error code display missing, mass-produced input network cable, output cables polarized.
Ptek NF PFC
NF PFC is suitable for the cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries, using our devices is very easy, thanks also to the programmed characteristic curves and to the intuitive control display, our device allows the user to save energy, contribute to significantly reduce CO2 emissions and support the “GOO Green Logistics” concept. NF PFC means very high quality, in fact our recharge systems are submitted to many tests by our techincal team and are guaranteed with high reliability. The active filter PFC allows to charge batteries perfectly and to extend their life up to 25%, with a power factor equal to 0,90, therefore the high level of efficiency allows to reduce the charging time and the energy costs up to 30%, all these values and functions are displayed on the control panel, which is easy to read and equipped with intuitive controls.
Technical Characteristics of NF PFC switching battery charger with high frequency technology, fully controlled by microprocessor, feeding 240V single-phase +- 10%, lexan luminous display with an easy reading of the charging parameters, different charging curves in accordance with the specific details of the battery, choose among 16 standard curves, preprogrammed and valid for Pb-Acid, GEL, battery voltage and charge current changing through the button in the front panel, “Soft start” mode, charging cycle displaying through the led in the front panel, electronic protection and/or fuse against short circuits over voltages, polarity reversal and anomalies (error code of any anomaly, fault warning by alphanumeric display), inner self contained ventilation through forced air, efficiency > 0,90%, mass-produced mains leads, protection against overheating, displayed charge current, battery tension, charging time (delivered charge expressed in Ah, and the absorbed electricity expressed in kWh).
Ptek BC1 YE1
Ptek BC1 and Ptek YE1 battery chargers (both single-phase) are designed to recharge medium capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. Ptek BC1 single phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, electronic control provided with final charge timer, rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer: TENVEX copper windings with double enamel insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, epoxy powder coating, oven-baked, standard color: RAL 5003 blue, lexan plate with charging data very easy to understand, equalization recall push button, ON - OFF push button, option to adjust the charging time, option to adjust the threshold voltage from 2.35 to 2.45 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color and logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request. Ptek YE1 single-phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, Electronic control provided with final charge timer, ON-OFF switch, Rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer : TENVEX copper windings with double enamel, insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, Epoxy powder coating, oven-baked, Standard color: RAL 5003 blue, New lexan plate with charging data very easy to understand, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color, custom-made logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request
Ptek bc1 ye1
Ptek BC1 and Ptek YE1 battery chargers (both single-phase) are designed to recharge medium capacity traction and start lead-acid batteries, developed using our forty-year experience in the field of battery chargers and multi-years application of microprocessor control systems which constantly monitors the basic parameters to ensure a correct operation and therefore safeguard the battery’s life. Ptek BC1 single phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, electronic control provided with final charge timer, rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer: TENVEX copper windings with double enamel insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, epoxy powder coating, oven-baked, standard color: RAL 5003 blue, lexan plate with charging data very easy to understand, equalization recall push button, ON - OFF push button, option to adjust the charging time, option to adjust the threshold voltage from 2.35 to 2.45 V/cell., equalization charge timed, led signaling charging phases or result, short check of functions and times, option to program the equalized charge automatically, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color and logo and silk-screen printing, complete with mains and battery cables; assembly of plugs and battery connectors on request. Ptek YE1 single-phase 230V - 50Hz one phase supply, (possibility to request voltages different from the standard ones), adjustable to ± 5% or ± 10%, Electronic control provided with final charge timer, ON-OFF switch, Rectifier bridge with silicon diodes, natural cooling, with snubber protection and gemov, tropicalized stray-flux transformer : TENVEX copper windings with double enamel, insulation; class H; impregnated in autoclave with ecological epoxy resins, 12/10 sheet steel case provided with electrical bondings and ergonomic handle, Epoxy powder coating, oven-baked, Standard color: RAL 5003 blue, New lexan plate with charging data very easy to understand, lab-tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, option: custom-made color, custom-made logo and silk-screen printing, complete with mains a
More from Ptek srl (11)
Recently uploaded
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Recently uploaded (20)
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Ptek BOF1 HF
- 1. PtekBOF1HF Idoneo per ricarica ciclica batterie piombo e/o carica mantenimento batterie gel e/o al piombo, tecnologia alta frequenza, impermeabile protezione IP66 (totalmente protetto contro la polvere e da getti d’acqua come ondate), design compatto, protetto dalle inversioni di polarità e da i corto circuito, ingresso 110/240V. Suitable for cyclic recharge of lead – acid batteries and floating of sealed gel and / or lead - acid batteries, high frequency technology, compact design, protected from wrong polarity and short circuit proof, feeding 110/240V. IP-66 degree (No ingress of dust; complete protection against contact - dust tight, water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects). PteK srl. - Via Tazio Nuvolari, 5 - 47843 - Misano Adriatico (RN) Phone/Fax: +39 0541 610 793 - info@ptek-hf.com PteK BOF1HF monofase Single phase Ptek BOF1HF BOF1HF (Single Phase) Build under IP66 security standard, suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and/or lead- acid batteries MODEL Battery Ah range Characteristic Battery Voltage Tension Ah Battery 9÷10 ore Ah Battery 11÷12 ore Plug Dimension WxLxH Weight Input Voltage P (kW) 12 V 6 A 40 ÷60 60÷80 SHUKO 100x150x60 1,5 240 0,16 8 A 60÷80 80÷120 0,18 10 A 80÷100 100÷140 0,20 12 A 90÷130 115÷160 0,22 24 V 6 A 40÷60 60÷80 0,36 8 A 60÷80 80÷120 0,36 10 A 80÷100 100÷140 0,40 20 A 100÷190 140÷250 - 30 A 190÷250 250÷300 200x170x100 2 0,93 36 V 20 A 110÷140 160÷190 1,10 48 V 15 A 90÷100 110÷130 - 20 A 110÷140 160÷190 1,49 40 26 16 Ø18 60 150 100 170 200 100 Conformità alle direttive 89/336/CEE e 72/23/CEE e marcatura . Conformity to the directives 89/336/ CEE and 72/23/CEE . marking