Report
Share
Recommended
Construction Technology Report
The document summarizes the construction technology of Madge Mansions, a luxury condominium development in Kuala Lumpur, Malaysia. It consists of 3 blocks of 10 stories with 52 units total, including 6 penthouses. Pile foundations were used to support the building due to weak surface soils. Suspended slabs were utilized for the ground level and upper levels to distribute loads. A flat roof was also employed.
Building Construction 7. construction site
This document provides an overview of construction site organization for a building project. It discusses preparing for the site by collecting technical, geographic, climatic and other relevant data. It describes the initial site work of establishing fences, access roads and excavating foundation pits. The document outlines considerations for on-site logistics like traffic flow, materials storage, temporary buildings and transport of workers, equipment and materials. Proper planning of construction site organization is emphasized as important for efficiency and cost-effectiveness of the building process.
Introduction to building technology
This document discusses building technologies and concepts of sustainability and building regulation. It covers why humans need buildings to create artificial environments suited for human life and activities. It then discusses various building technologies related to enclosure, structure, environmental control and utilities that allow buildings to provide a controlled interior environment. Finally, it discusses building control through building regulations and approved documents that provide guidance on meeting regulation standards.
Building construction
Building construction has evolved from basic shelter building by early humans to a significant modern industry. It involves designing, planning, and erecting structures according to regulatory standards. New 3D printing techniques may allow for more flexible and rapid construction of buildings with integrated utilities. The US construction industry generates around $850 billion annually but high unemployment reflects the impact of the economic downturn. Various concrete construction systems now offer alternatives to traditional building methods.
Understanding Building construction
Contact our business manager Lloyd Cassidy and see the builders display home to see the kind of development bushfire resistant work we do in Bendigo, Geelong, and Horsham.
Building technology in construction intro
This document discusses building technology and construction materials. It covers traditional materials like brick, mortar, timber and concrete as well as modern materials like glass and plastics. It also examines different building types such as houses, warehouses, retail units, and offices. Specific construction methods like timber frame and steel frame buildings are outlined. Concrete frame construction is also detailed, including advantages and disadvantages.
Temporary works
This document summarizes information presented in a seminar on temporary works for civil engineering students. It defines temporary works as parts of a construction project needed to enable the permanent structures to be built, usually removed after use, such as scaffolding and shoring. Methods of timbering trenches are described, including stay bracing, box sheeting, vertical sheeting, and sheet piling. Types of scaffolding like single, double, needle and trestle are defined. Shoring methods like raking, flying and dead shores are explained for temporarily supporting unsafe structures.
Site selection, site planning, site divelepment
Site selection is crucial for earthquake-resistant design. At the macro level, sites should be evaluated based on their tectonic plate position and seismic zone. Potentially hazardous sites at the micro level include steep unstable slopes, landslide-prone areas, river banks, and faults. When planning sites, buildings should be set back from steep slopes and not located on filled soil without special foundations. Forests and individual trees can help mitigate landslides but buildings should not be too close to avoid falling risks. Overall, the safest sites avoid known hazards and have sufficient space between structures.
Recommended
Construction Technology Report
The document summarizes the construction technology of Madge Mansions, a luxury condominium development in Kuala Lumpur, Malaysia. It consists of 3 blocks of 10 stories with 52 units total, including 6 penthouses. Pile foundations were used to support the building due to weak surface soils. Suspended slabs were utilized for the ground level and upper levels to distribute loads. A flat roof was also employed.
Building Construction 7. construction site
This document provides an overview of construction site organization for a building project. It discusses preparing for the site by collecting technical, geographic, climatic and other relevant data. It describes the initial site work of establishing fences, access roads and excavating foundation pits. The document outlines considerations for on-site logistics like traffic flow, materials storage, temporary buildings and transport of workers, equipment and materials. Proper planning of construction site organization is emphasized as important for efficiency and cost-effectiveness of the building process.
Introduction to building technology
This document discusses building technologies and concepts of sustainability and building regulation. It covers why humans need buildings to create artificial environments suited for human life and activities. It then discusses various building technologies related to enclosure, structure, environmental control and utilities that allow buildings to provide a controlled interior environment. Finally, it discusses building control through building regulations and approved documents that provide guidance on meeting regulation standards.
Building construction
Building construction has evolved from basic shelter building by early humans to a significant modern industry. It involves designing, planning, and erecting structures according to regulatory standards. New 3D printing techniques may allow for more flexible and rapid construction of buildings with integrated utilities. The US construction industry generates around $850 billion annually but high unemployment reflects the impact of the economic downturn. Various concrete construction systems now offer alternatives to traditional building methods.
Understanding Building construction
Contact our business manager Lloyd Cassidy and see the builders display home to see the kind of development bushfire resistant work we do in Bendigo, Geelong, and Horsham.
Building technology in construction intro
This document discusses building technology and construction materials. It covers traditional materials like brick, mortar, timber and concrete as well as modern materials like glass and plastics. It also examines different building types such as houses, warehouses, retail units, and offices. Specific construction methods like timber frame and steel frame buildings are outlined. Concrete frame construction is also detailed, including advantages and disadvantages.
Temporary works
This document summarizes information presented in a seminar on temporary works for civil engineering students. It defines temporary works as parts of a construction project needed to enable the permanent structures to be built, usually removed after use, such as scaffolding and shoring. Methods of timbering trenches are described, including stay bracing, box sheeting, vertical sheeting, and sheet piling. Types of scaffolding like single, double, needle and trestle are defined. Shoring methods like raking, flying and dead shores are explained for temporarily supporting unsafe structures.
Site selection, site planning, site divelepment
Site selection is crucial for earthquake-resistant design. At the macro level, sites should be evaluated based on their tectonic plate position and seismic zone. Potentially hazardous sites at the micro level include steep unstable slopes, landslide-prone areas, river banks, and faults. When planning sites, buildings should be set back from steep slopes and not located on filled soil without special foundations. Forests and individual trees can help mitigate landslides but buildings should not be too close to avoid falling risks. Overall, the safest sites avoid known hazards and have sufficient space between structures.
Visit to a construction site
building Site report for 1st year students of B.sc Civil Engineering... this will be helpful in case you have just joined Civil Engineering Class and Your Teacher ask you to prepare a report based on Basic Knowledge.
Formwork Presentation for Construction Technology
1. Formwork refers to the temporary structure used to support wet concrete until it is cured and can support itself. Common materials used include wood, steel, aluminum, plastic and plywood.
2. A good formwork must be water tight, strong, and reusable while also considering factors like quality, safety, and economy. It must be able to withstand loads, retain its shape, and be removed without damaging the concrete.
3. Different types of formworks are used for columns, beams, slabs, and other structural elements. Column formwork typically consists of side and end planks joined by yokes and bolts. Beam formworks use thick timber or plywood and are supported by props.
lecture2 site investigation
1. A site investigation determines the suitability of a site for construction by examining physical aspects like soil composition and legal aspects like planning permissions.
2. The investigation assesses the site suitability, helps with design and construction planning, and predicts potential issues. Information is needed on soil properties, groundwater, and excavated materials.
3. The investigation process involves a desk study of existing information, a site walkover, detailed tests and sampling which may include trial pits and boreholes to examine soil and groundwater conditions.
Building construction ppt
The document discusses building construction and materials. It covers why buildings are needed, the constraints and code regulations for construction, the typical construction process from planning to evaluation, how loads are imposed on buildings and transferred through structural elements like beams, columns, walls and connections, basic building components, and common construction materials including wood, steel, concrete, masonry and cement. Forces from loads must be delivered to the foundation for structural integrity.
Construction process
The document describes the typical process for construction projects, which involves several key stages:
1) A need is identified, initial plans are developed, and a designer is selected.
2) Conceptual and final designs are created along with cost estimates. Bids are solicited from contractors.
3) A contractor is selected and construction begins according to the project plans.
4) Once completed, the facility is used and maintained over its lifespan.
Building methods and construction technology 1
This document provides an overview of carpentry and joinery topics including building design principles, substructure and superstructure elements, load distribution, types of concrete foundations, floor construction methods, solid walls, cavity walls, timber framing, structural insulated panels, energy loss considerations, and load and stress. The document is authored by Stephen Jones and intended as a tutor resource on these carpentry and joinery topics.
Advanced Construction Technology Project
The document proposes using modern methods of construction (MMC) to reduce the construction time of the South Cumberland Street development. Specifically, it recommends using precast concrete wall panels, precast floor slabs and stairs, and spray-on plastering for internal walls. Precast walls can be constructed more quickly and with better quality control than traditional insitu concrete walls. Electrical conduits and connections for cladding can be cast into the precast walls in the factory. Similarly, precast floors and stairs can be installed faster than poured concrete components. Using MMC is expected to significantly reduce the overall construction schedule while maintaining quality for the client.
Introduction to construction management
Friends, this ppt consists of various facets of construction management and equipment such as how to buy equipments, its various types and Depreciation and lastly why and how to replace equipments.
Building Construction
The document summarizes the construction process observed at a construction site visited by the authors. It describes the site location and type of buildings being constructed. Safety measures at the site include signage and required protective equipment. Various plants and machinery used at different stages are discussed, including excavators, backhoes, cranes and concrete mixers. Foundations works involving piling and excavations are mentioned.
Building construction-report (1)
The document reports on the construction of three sites - a fire station in Kuala Lumpur, an eco-friendly mosque in Cyberjaya, and terrace houses in Klang. It introduces the projects, provides an overview of each site, and discusses site safety precautions, machinery and equipment used, site preparation processes, and various construction stages. Photos are included to illustrate the different elements discussed in the report.
Construction equipments
This document provides an overview of various types of construction equipment used in large construction projects. It discusses earthmoving equipment like power shovels, backhoes, draglines, clamshells and scrapers that are used for excavation and hauling. It also describes hauling equipment like dump trucks and dumpers. Further, it covers hoisting equipment such as cranes and conveying equipment used to transport materials. The document provides details on the working, applications and comparisons of different equipment types used widely in construction activities.
Site Selection Criteria
This document evaluates three potential sites - Makati, Ortigas, and Taguig - for suitability based on natural/environmental, socio-economic, and legal factors. Each site is rated on multiple criteria within each factor category, with ratings ranging from 1 to 5. Total scores are calculated for each site based on criteria ratings and weights. Makati scored highest in the natural/environmental category with 87 points, while Ortigas scored highest in the socio-economic category with 94 points. All three sites scored similarly in the legal/administrative category in the high 80s to low 90s range.
Stages in Construction
The document outlines the key stages of construction for a building project, including:
1. Site works such as clearing, setting out boundaries, and establishing datum levels.
2. Accommodation, storage, and security provisions like fencing and hoardings.
3. The typical order of construction stages such as excavation, foundations, framing, and finishes.
More Related Content
Viewers also liked
Visit to a construction site
building Site report for 1st year students of B.sc Civil Engineering... this will be helpful in case you have just joined Civil Engineering Class and Your Teacher ask you to prepare a report based on Basic Knowledge.
Formwork Presentation for Construction Technology
1. Formwork refers to the temporary structure used to support wet concrete until it is cured and can support itself. Common materials used include wood, steel, aluminum, plastic and plywood.
2. A good formwork must be water tight, strong, and reusable while also considering factors like quality, safety, and economy. It must be able to withstand loads, retain its shape, and be removed without damaging the concrete.
3. Different types of formworks are used for columns, beams, slabs, and other structural elements. Column formwork typically consists of side and end planks joined by yokes and bolts. Beam formworks use thick timber or plywood and are supported by props.
lecture2 site investigation
1. A site investigation determines the suitability of a site for construction by examining physical aspects like soil composition and legal aspects like planning permissions.
2. The investigation assesses the site suitability, helps with design and construction planning, and predicts potential issues. Information is needed on soil properties, groundwater, and excavated materials.
3. The investigation process involves a desk study of existing information, a site walkover, detailed tests and sampling which may include trial pits and boreholes to examine soil and groundwater conditions.
Building construction ppt
The document discusses building construction and materials. It covers why buildings are needed, the constraints and code regulations for construction, the typical construction process from planning to evaluation, how loads are imposed on buildings and transferred through structural elements like beams, columns, walls and connections, basic building components, and common construction materials including wood, steel, concrete, masonry and cement. Forces from loads must be delivered to the foundation for structural integrity.
Construction process
The document describes the typical process for construction projects, which involves several key stages:
1) A need is identified, initial plans are developed, and a designer is selected.
2) Conceptual and final designs are created along with cost estimates. Bids are solicited from contractors.
3) A contractor is selected and construction begins according to the project plans.
4) Once completed, the facility is used and maintained over its lifespan.
Building methods and construction technology 1
This document provides an overview of carpentry and joinery topics including building design principles, substructure and superstructure elements, load distribution, types of concrete foundations, floor construction methods, solid walls, cavity walls, timber framing, structural insulated panels, energy loss considerations, and load and stress. The document is authored by Stephen Jones and intended as a tutor resource on these carpentry and joinery topics.
Advanced Construction Technology Project
The document proposes using modern methods of construction (MMC) to reduce the construction time of the South Cumberland Street development. Specifically, it recommends using precast concrete wall panels, precast floor slabs and stairs, and spray-on plastering for internal walls. Precast walls can be constructed more quickly and with better quality control than traditional insitu concrete walls. Electrical conduits and connections for cladding can be cast into the precast walls in the factory. Similarly, precast floors and stairs can be installed faster than poured concrete components. Using MMC is expected to significantly reduce the overall construction schedule while maintaining quality for the client.
Introduction to construction management
Friends, this ppt consists of various facets of construction management and equipment such as how to buy equipments, its various types and Depreciation and lastly why and how to replace equipments.
Building Construction
The document summarizes the construction process observed at a construction site visited by the authors. It describes the site location and type of buildings being constructed. Safety measures at the site include signage and required protective equipment. Various plants and machinery used at different stages are discussed, including excavators, backhoes, cranes and concrete mixers. Foundations works involving piling and excavations are mentioned.
Building construction-report (1)
The document reports on the construction of three sites - a fire station in Kuala Lumpur, an eco-friendly mosque in Cyberjaya, and terrace houses in Klang. It introduces the projects, provides an overview of each site, and discusses site safety precautions, machinery and equipment used, site preparation processes, and various construction stages. Photos are included to illustrate the different elements discussed in the report.
Construction equipments
This document provides an overview of various types of construction equipment used in large construction projects. It discusses earthmoving equipment like power shovels, backhoes, draglines, clamshells and scrapers that are used for excavation and hauling. It also describes hauling equipment like dump trucks and dumpers. Further, it covers hoisting equipment such as cranes and conveying equipment used to transport materials. The document provides details on the working, applications and comparisons of different equipment types used widely in construction activities.
Site Selection Criteria
This document evaluates three potential sites - Makati, Ortigas, and Taguig - for suitability based on natural/environmental, socio-economic, and legal factors. Each site is rated on multiple criteria within each factor category, with ratings ranging from 1 to 5. Total scores are calculated for each site based on criteria ratings and weights. Makati scored highest in the natural/environmental category with 87 points, while Ortigas scored highest in the socio-economic category with 94 points. All three sites scored similarly in the legal/administrative category in the high 80s to low 90s range.
Stages in Construction
The document outlines the key stages of construction for a building project, including:
1. Site works such as clearing, setting out boundaries, and establishing datum levels.
2. Accommodation, storage, and security provisions like fencing and hoardings.
3. The typical order of construction stages such as excavation, foundations, framing, and finishes.