Epcon offers comprehensive evaluation and custom technology selection for industrial processes to enhance production efficiencies and ensure compliance with environmental regulations. Their services include detailed emissions analysis, engineering design, manufacturing, installation, upgrades, and preventative maintenance, utilizing advanced technologies for optimized performance. Additionally, Epcon provides rental options for thermal oxidizers and other equipment to minimize downtime and operational challenges.

1. Logo Here
Process Evaluation & Technology
Selection
Epcon will do a complimentary evaluation of your existing process and
operating needs upfront. Our application Engineers are trained experts at
providing optimized solutions with the primary objective of increasing
production efficiencies that save on operating cost and increase overall
value across all industrial applications.
At the start of each project, our team does a comprehensive process
evaluation to ensure we select the appropriate custom technology
for your facility. No two processes are alike, and all our systems are
custom designed specifically for your facility.
Visit Us https://epconlp.com/services/process-evaluation-
technology-selection/

2. Logo Here
Epcon’s environmental specialist are experts at evaluating your
process streams emissions and finding the best solution to destroy
the toxic VOC’s present, so your operations stay compliant at all
times.
Process Emissions Analysis
Epcon can perform a detailed analysis and study of your specific
process emission stream to determine the appropriate abatement
technology to meet the required Destructive Rate Efficiency (DRE) to
keep your facility operating in compliance.
Permit Application Support
Our experienced engineers can assist you in the permitting process
by recommending the appropriate operating permits for new and
existing air pollution control equipment.
Check the link for details
https://epconlp.com/services/environmental-consulting/
Environmental Consulting Services

3. Logo Here
Engineering and Design Services
Epcon’s technical staff is made up of experienced Chemical and Mechanical
Engineers with in-depth knowledge, not only of our products, but also of
the industries we serve. This allows us to assist every customer at the early
stages of each project. Using the most technically advanced software, the
Epcon engineers design each system promptly and accurately. We have
developed our own proprietary process flow simulation programs, that
allow us to model your exact process to bring our engineering calculations
and studies to fruition.
Our design team utilizes SolidWorks 3D modeling and AutoCAD
programs to custom design your new system based on each
customer’s specific requirements. A full set of engineering drawings,
system modeling, and design details are presented to each client for
review and approval prior to production.
Visit us https://epconlp.com/services/engineering-design-services/

4. Logo Here
Electrical Programming & Controls
Systems
An integrated control system, whether designing a new controls package or
updating your existing system to a new controls scheme, is the most
effective way to enhance any complex industrial manufacturing process. A
well-designed control system not only ensures greater safety and hazard
prevention, as well as increased efficiencies and reliability, while also
allowing for precise monitoring for strict operating parameters.
All our control panels are custom-built in-house by our UL certified
Electrical Department using the highest quality components and meet the
latest NEC and Industry standards. From new equipment to upgrades and
retrofits, our systems utilize the latest in Programmable Logic Controller
(PLC) based controls, HMI touch screen interfaces, and remote monitoring
capabilities, resulting in a system which meets a range variable
operational demands, while limiting operator oversight.
Check the link below for details https://epconlp.com/services/electrical-
programming-controls-systems/

5. Logo Here
Manufacturing and Testing Services
Epcon is one of the few industrial equipment suppliers that has our own on-
site manufacturing capabilities. With over 250,000 sq ft of manufacturing
space and state of the art fabrication equipment – no project is too large or
complex.
As an innovative custom manufacturer, Epcon has the ability and expertise
to supply and integrate a wide variety of equipment to optimize your
overall operations. From process heating, air pollution, heat recovery,
finishing systems, and more- our team can design a fully integrated
system for your facility that will save you on operating cost.
Check this link https://epconlp.com/services/manufacturing-testing/

6. Logo Here
Installation, Commissioning
and Training
Epcon takes great pride and care in the commissioning process, ensuring
that the shipping, on-site installation, testing and start-up run smoothly.
All of our systems are pre-assembled, pre-wired and full factory tested at
Epcon’s facility so that you have the piece of mind your installed
equipment will meet all performance metrics. All systems are then
disassembled into modules and shipped around the world.
Check the link below for details https://epconlp.com/services/installation-
commissioning-training/

7. Logo Here
Upgrades and Retrofits Services
Our Engineers and Service Team can modify our systems and even those of
the competition, ensuring optimal performance with minimal down-time
and costs.
Complete on-site rebuild and retrofitting capabilities allow for quick
process modifications that translate into time and money saved in the long
run. Mobile testing professionals can be available for on-site assessment
to propose solutions.
• Burner retrofits
• Ceramic Media & Insulation replacement
• Re-piping or wiring
• Logic and control updates
Visit Us https://epconlp.com/services/services-part-rebuilds-retrofits/

8. Logo Here
Preventative Maintenance and
Service
Epcon highly recommends routine evaluation and inspection of all process
heating and air pollution control systems to improve the operating life and
performance of your systems.
We provide 24/7 on-site Service calls as well as preventative maintenance
programs, that can result in significant operating savings, as well as long
term equipment cost.
Benefits Include:
• Ensures regulatory compliance
• Increases operating efficiency through system recalibration
• Reduces risk of unexpected system downtime
• Extends the life and uptime of the systems
Visit this link for details https://epconlp.com/services/preventative-
maintenance-service/

9. Logo Here
Industrial Equipment Spare Parts
Why risk downtime and fines for being out compliance? Epcon
recommends always being prepared with critical spare parts to keep your
systems operating at 100%.
Our service team can recommend a set of spare parts to keep in stock.
Even if your system is old or supplied by others, Epcon engineering
experts can quickly assess your equipment needs and determine the
recommended spare parts to suit your operational demands.
After over 40 year in business, Epcon has developed an expansive network
of vendor relationships and can not only prioritize your equipment but
ensure you receive the best prices for parts and installation services.
Check this link for details https://epconlp.com/services/spare-parts/

10. Logo Here
Rental Thermal Oxidizers
Epcon carries a full range of Thermal Oxidizers, Industrial Ovens, Industrial
Furnaces and Direct Fired Thermal Oxidizers available as rental and lease
units to fit your needs.
Whether you are requiring temporary equipment while renovating or
outfitting your operations, or in need of a mobile solution in the field-
Epcon’s rental fleet has you covered! We have supplied several trailer
mounted units for short term site remediation for decontaminating soil
and removing any toxic fugitive emissions.
Minimizing your operating downtime is our primary objective. We supply
trailer mounted and skid mounted units equipped with propane, natural
gas or electric power generation and hook-up options. Our turnkey
systems are fully automated, including comprehensive system controls
and safety features.
Visit Us https://epconlp.com/services/rental-equipment/

11. Logo Here
Contact Information
Email: epcon@epconlp.com
Location : 17777 I-45 S, Conroe Tx 77385
Opening Hours : Mon-Fri: 8am – 5pm CST
Websites and social links:
https://epconlp.com/
https://www.facebook.com/EpconIndustrialSystems/
https://www.youtube.com/channel/UC0Xzloys1BPqdBzzgqLp5Mw
https://twitter.com/epconlp
https://www.linkedin.com/company/epcon-industrial-systems/mycompany/