Pre-connectorized patchcord (GJXH) is designed for harsh industrial environments and FTTx/FTTH applications. It has corrosion-resistant, waterproof, and dustproof protection and easy FTTx installation and termination using existing hardware and installation methods for drops to homes and businesses. This article provides some knowledge about pre-connectorized patchcord (GJXH).
When designing fiber-to-the-home (FTTH) networks,
much thought goes into choosing the right architecture
for the job. But the hardware that implements the
design is equally important. Choosing the right drop
cable interconnect solution, for example, directly
affects network reliability, operational flexibility and
the economics of FTTH deployment.Further Information Visit http://fibercoppersale.com/
High-Performance Fiber Optic Cables for the FTTH Access Network ApplicationdocSun Telecom
With the continuous development of FTTH (Fiber-to-the-Home) network construction, there will be more and more new varieties of fiber optic cables for the FTTH access network application. This article will discuss the three types of fiber optic cables for FTTH in detail.
FTTA Fiber Optic Distribution Box Ideal Solution for 5G Network ApplicationSun Telecom
FTTA (Fiber-to-the-Antenna) fiber optic distribution box is used for network access points terminals in the FTTx network. It has inlet and outlet cables pre-connected, eliminating the need for closure opening and fiber splicing. All ports are equipped with hardened adapters. The operators do not need to splice fibers or open boxes during optical distribution network (ODN) deployment, which improves service provisioning efficiency. This article discusses the FTTA fiber optic distribution box.
How Many Types of PLC Splitter Do You KnowSun Telecom
A planar waveguide circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from the Central Office (CO) to multiple premise locations. It provides low insertion loss, low polarization-dependent loss, small size, wide operating wavelength and temperature range, high reliability, high stability, and good channel uniformity.
A Guide To Understanding Fiber Optic Splice Closure(FOSC)Sun Telecom
No matter the size and configuration of your network, protecting its connectivity is what counts. Fiber optic splice closure (FOSC) provides space and protection for the fiber optic cable splicing and joint. In addition, fiber optic splice closure is designed to improve reliability, flexibility, and density and reduce installation time and cost. This article provides a comprehensive understanding of FOSC.
When designing fiber-to-the-home (FTTH) networks,
much thought goes into choosing the right architecture
for the job. But the hardware that implements the
design is equally important. Choosing the right drop
cable interconnect solution, for example, directly
affects network reliability, operational flexibility and
the economics of FTTH deployment.Further Information Visit http://fibercoppersale.com/
High-Performance Fiber Optic Cables for the FTTH Access Network ApplicationdocSun Telecom
With the continuous development of FTTH (Fiber-to-the-Home) network construction, there will be more and more new varieties of fiber optic cables for the FTTH access network application. This article will discuss the three types of fiber optic cables for FTTH in detail.
FTTA Fiber Optic Distribution Box Ideal Solution for 5G Network ApplicationSun Telecom
FTTA (Fiber-to-the-Antenna) fiber optic distribution box is used for network access points terminals in the FTTx network. It has inlet and outlet cables pre-connected, eliminating the need for closure opening and fiber splicing. All ports are equipped with hardened adapters. The operators do not need to splice fibers or open boxes during optical distribution network (ODN) deployment, which improves service provisioning efficiency. This article discusses the FTTA fiber optic distribution box.
How Many Types of PLC Splitter Do You KnowSun Telecom
A planar waveguide circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from the Central Office (CO) to multiple premise locations. It provides low insertion loss, low polarization-dependent loss, small size, wide operating wavelength and temperature range, high reliability, high stability, and good channel uniformity.
A Guide To Understanding Fiber Optic Splice Closure(FOSC)Sun Telecom
No matter the size and configuration of your network, protecting its connectivity is what counts. Fiber optic splice closure (FOSC) provides space and protection for the fiber optic cable splicing and joint. In addition, fiber optic splice closure is designed to improve reliability, flexibility, and density and reduce installation time and cost. This article provides a comprehensive understanding of FOSC.
How Much Do You Know About Aerial Fiber Optic Cable?Sun Telecom
Aerial fiber optic cable is used very commonly in optical communication these days. We can see the aerial cable hanging on the poles in your surroundings.
There are different types of fiber optic cable available in the market. They are different in sizes, shapes, colors, structure, and materials. So, how to choose the right fiber optic cable?
HTB8009(formerly known as Termination Box 1-6C) are used in the end termination of residential buildings and villas, to fix and splice with Pigtails or connected fast connectors can be installed on the outside wall.
During past years Nestor Cables has morphed from a traditional cable manufacturer into a modern solution provider - nowadays we aim to deliver whole packages to serve as a complete solutions to our customers’ needs. Our solutions have been developed with decades of experience in cable technologies and in close cooperation with our customers. In this brochure we introduce six solutions: Fibre to the Antenna, Fibre to the Home, Fibre Optic Cables in Windmill Farms, Mobile Optical Cable Units, Nestor Cables Security System N-Sec and Microduct cabling solution.
Things You Must Know About Fiber Optic Distribution BoxSun Telecom
A fiber optic distribution box is used in the FTTH network. It protects the connection of fiber cable and pigtails in FTTH and makes the fiber cable access point stable, dust-proof, waterproof, and anti-aging. This article provides some knowledge about fiber optic distribution boxes.
ODC is a robust connector that withstands all installation hazards and does not allow handling errors. ODC connector makes installations more reliable and ensures high performance. This article provides some knowledge about ODC connectors.
Everything You Need to Know About Breakout CableSun Telecom
A breakout cable is the solution that mitigates risk, lowers operating costs, provides high speed, greater flexibility to upgrade, and rugged design for data centers and more applications.
Loose tube cables can be either dielectric or optionally armored. The loose-tube design helps in the identification and administration of fibers in the system.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
Roxtec cable transit systems provide cable entry seals for telecom networks, mobile and fixed-line installations - Roxtec cable entry seals have been designed for maximum customer benefit both in terms of reliable protection and ease of use.
Roxtec Cable Transit & Cable Entry Seales - Telecomms Applications
*Outdoor cabinets - sealing cables passing from outside to inside of a cabinet
*Roof top site - cable seal through the outer wall of building for antenna cables
*Radiolink - roof-top cable seal handling antenna cables on roof construction
*3G Base Station Shelter - sealing of feeders through the wall
*Base station shelter - round cable sealing solution for openings in port hole
*Communication centres - sealing fibre optics and cables in floors and walls
*Switch station - cable seals through floors and walls in the switch station
*Buildings - sealing of feeding cables into buildings
*Railway - sealing of cables for GSM-R through wall and floor of shelters
*FTTH - conduits of fibre optics sealed in the foundation of network shelters
*Cabinets - cable entry solution to seal cables in outdoor cabinets
*Manhole - sealing of power cables in underground vaults
How Enterprise is Turning to the FTTM to Accelerate Industry Digital Transfor...Sun Telecom
FTTM (Fiber-To-The-Machine) accelerates digital transformation in many industries by providing high bandwidth and low latency, improving O&M (Operations and Maintenance) efficiency, and future-oriented continuous evolution.
Unlocking the Secrets of Pre-Laid Cable DuctSun Telecom
How can telecom manufacturers and providers meet today’s infrastructure needs, creating a path for new growth, while reducing construction costs down the road? Deploy pre-laid cable duct (PCD). PCD can reduce the cost of installation and construction.
More Related Content
Similar to Pre-Connectorized Patchcord (GJXH) Ideal Solution For Your FTTx FTTH Application
How Much Do You Know About Aerial Fiber Optic Cable?Sun Telecom
Aerial fiber optic cable is used very commonly in optical communication these days. We can see the aerial cable hanging on the poles in your surroundings.
There are different types of fiber optic cable available in the market. They are different in sizes, shapes, colors, structure, and materials. So, how to choose the right fiber optic cable?
HTB8009(formerly known as Termination Box 1-6C) are used in the end termination of residential buildings and villas, to fix and splice with Pigtails or connected fast connectors can be installed on the outside wall.
During past years Nestor Cables has morphed from a traditional cable manufacturer into a modern solution provider - nowadays we aim to deliver whole packages to serve as a complete solutions to our customers’ needs. Our solutions have been developed with decades of experience in cable technologies and in close cooperation with our customers. In this brochure we introduce six solutions: Fibre to the Antenna, Fibre to the Home, Fibre Optic Cables in Windmill Farms, Mobile Optical Cable Units, Nestor Cables Security System N-Sec and Microduct cabling solution.
Things You Must Know About Fiber Optic Distribution BoxSun Telecom
A fiber optic distribution box is used in the FTTH network. It protects the connection of fiber cable and pigtails in FTTH and makes the fiber cable access point stable, dust-proof, waterproof, and anti-aging. This article provides some knowledge about fiber optic distribution boxes.
ODC is a robust connector that withstands all installation hazards and does not allow handling errors. ODC connector makes installations more reliable and ensures high performance. This article provides some knowledge about ODC connectors.
Everything You Need to Know About Breakout CableSun Telecom
A breakout cable is the solution that mitigates risk, lowers operating costs, provides high speed, greater flexibility to upgrade, and rugged design for data centers and more applications.
Loose tube cables can be either dielectric or optionally armored. The loose-tube design helps in the identification and administration of fibers in the system.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
Roxtec cable transit systems provide cable entry seals for telecom networks, mobile and fixed-line installations - Roxtec cable entry seals have been designed for maximum customer benefit both in terms of reliable protection and ease of use.
Roxtec Cable Transit & Cable Entry Seales - Telecomms Applications
*Outdoor cabinets - sealing cables passing from outside to inside of a cabinet
*Roof top site - cable seal through the outer wall of building for antenna cables
*Radiolink - roof-top cable seal handling antenna cables on roof construction
*3G Base Station Shelter - sealing of feeders through the wall
*Base station shelter - round cable sealing solution for openings in port hole
*Communication centres - sealing fibre optics and cables in floors and walls
*Switch station - cable seals through floors and walls in the switch station
*Buildings - sealing of feeding cables into buildings
*Railway - sealing of cables for GSM-R through wall and floor of shelters
*FTTH - conduits of fibre optics sealed in the foundation of network shelters
*Cabinets - cable entry solution to seal cables in outdoor cabinets
*Manhole - sealing of power cables in underground vaults
How Enterprise is Turning to the FTTM to Accelerate Industry Digital Transfor...Sun Telecom
FTTM (Fiber-To-The-Machine) accelerates digital transformation in many industries by providing high bandwidth and low latency, improving O&M (Operations and Maintenance) efficiency, and future-oriented continuous evolution.
Unlocking the Secrets of Pre-Laid Cable DuctSun Telecom
How can telecom manufacturers and providers meet today’s infrastructure needs, creating a path for new growth, while reducing construction costs down the road? Deploy pre-laid cable duct (PCD). PCD can reduce the cost of installation and construction.
FTTH Network A Future-Proof Solution for Access Network ApplicationSun Telecom
Demand for high bandwidth services by end users continues to grow rapidly. To meet current and future demand for services, such as internet TV, 4K/8K video, online gaming, VR/AR, and IoT, operators are deploying FTTH (Fiber-to-the-Home) to the consumer’s home or business. It provides low latency, high reliability, and high-speed internet connections. This article provides some information about FTTH.
FTTO Network Cost-effective Cabling Infrastructure Solution for Modern OfficeSun Telecom
FTTO (Fiber-to-the-Office) is a cost-effective cabling and future-proof networking infrastructure solution for modern office environments. It combines the advantages of highly efficient fiber optic cable with the flexibility of twisted pair cable. This article provides some knowledge about FTTO.
FTTR Network The Ultimate Solution for Home Gigabit WiFi 6 TechnologySun Telecom
With the continuous acceleration of the transformation process in the digital age, it is the general trend to increase the construction of 5G networks and gigabit optical networks. FTTR (Fiber-to-the-Room) network provides new Gigabit network coverage solutions, which will be one of the technical directions for future Gigabit home broadband upgrades. This article provides some information about FTTR.
Step Into the Future With 400G ZR+ Coherent Pluggable OpticsSun Telecom
400G ZR+ coherent pluggable optics has become a new solution for high-density networks with data rates from 100G to 400G featuring low power and small space. Let's see how the latest generation of 400G ZR+ optics extends the economic benefits to meet the requirements of network operators, maximizes fiber utilization, and reduces the cost of data transport.
400G ZR Coherent Pluggable Optics Enable 400G for Next-Generation Data Center...Sun Telecom
400G ZR coherent pluggable optics plays a vital role in enabling the next-generation data center to interconnect (DCI) and metro network solutions to meet the bandwidth requirements of today and tomorrow. It reduces the cost and complexity of high-bandwidth data center interconnects and promotes interoperability among optical module manufacturers and providers. This article provides some knowledge about 400G ZR.
Closer Look at 400G QSFP-DD Optical Transceiver ModuleSun Telecom
Recent years have seen the evolution towards the 5G, Internet of Things (IoT), and cloud computing, increasing pressure on data centers to ramp up both network capacity to 400G and driving providers to search for new solutions to achieve their 400G Data Center Interconnects (DCIs). 400G QSFP-DD optical transceiver module is becoming one of the most popular cutting-edge 400G DCI solutions. This article will provide a basic understanding of QSFP-DD optical transceiver modules.
Combo PON Has Become the Principal Solution for 10G GPON ConstructionSun Telecom
At present, more operators worldwide have carried out the 10G-GPON deployment and upgrade to meet the requirements of the gigabit user markets. In the global market, optical broadband access development has entered the Gigabit era. Combo PON is the mainstream large-scale commercial deployment solution for the upgrade of GPON to 10G GPON. This article will provide some knowledge about Combo PON.
A Quick Look at the Differences 400G QSFP-DD vs. 400G OSFP Optical Transceive...Sun Telecom
There are multiple form factors for the 400G optical transceiver module. QSFP-DD (Quad Small Form-Factor Pluggable-Double Density ) and OSFP (Octal Small Form-Factor Pluggable ) are clearly in competition for all access network and data center applications.
400G CFP8 in the Data Center Options For Your Optical Transceiver ModuleSun Telecom
The worldwide network traffic is expanding due to the rapid expansion of mobile Internet, cloud computing, big data, and other technologies. Major providers in the market have started to launch 400G and even 800G optical transceiver modules. So, do you know the 400G CFP8 optical transceiver module?
VPN router is a perfect solution for advanced security and complete privacy on the Web. When you set up a VPN router, all your home or business devices are connected to the encrypted Wi-Fi. This article helps you to understand the importance of having a VPN router at your home or business.
The business router provides Internet access for home and office and often connects two or more computer networks. It helps to manage network bandwidth, segmentation, security, and routing policies. This article provides a complete guide to the business router.
Router connects all networking devices as the network's central hub. It has the power to build or break your network, even while your internet service provider (ISP) ultimately controls your speed and bandwidth limits. This article provides information about the router.
Gigabit Ethernet Switch Address Bottleneck at the Network Edge.pdfSun Telecom
Gigabit Ethernet Switch plays a crucial role in the network edge. It has high-speed network connectivity and improved security, reliability, flexibility, scalability, efficiency, and easy operation. This article will help you understand the gigabit ethernet switch.
Comprehensive Understanding of Industrial Ethernet SwitchSun Telecom
Industrial Ethernet Switch plays an essential role in various industries such as energy, environmental protection, transportation, smart city, surveillance, etc. And the demand for industrial Ethernet switches is also increasing. This article provides a comprehensive understanding of industrial Ethernet switches.
In-Depth Understanding of Fiber Optic Sensing NetworkSun Telecom
Fiber optic sensing network is a tendency for many applications. It supports a large number of sensors in a single optical fiber with high-speed, high security, and low attenuation. This article provides some information about fiber optic sensing networks.
Core switch is designed to meet the most demanding enterprise network requirements such as reliability, high speed, and scalable. It supports the next-generation Ethernet speeds with 10/25 Gigabit Ethernet at the aggregation and 40/100 Gigabit Ethernet to meet the high volume of traffic driving from the edge into the core. This article provides some understanding of core switches.
When installing a network, one of the first things users consider is whether to use fiber optic cable or copper cable. Although both copper cable and fiber optic cable can transmit an acceptable signal, fiber optic cable is the most desired choice with today’s growing bandwidth requirements over long distances. This article will share eight reasons why users should choose fiber optic cable over copper cable.
How Many Types of Fiber Optic Patch Panel Do You KnowSun Telecom
Fiber optic patch panels play an increasingly important role in the fiber optic network due to the widespread use of high-density cabling systems in data centers. It provides a simple solution for incorporating flexibility, manageability, installation, and scalability into high-density fiber optic cable systems. This article will provide a better understanding of fiber optic patch panel types.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Pre-Connectorized Patchcord (GJXH) Ideal Solution For Your FTTx FTTH Application
1. Email: ics@suntelecom.cn Skype: suntelecom.s01 Whatsapp: +86 21 6013 8637
Pre-connectorized patchcord (GJXH) is designed for harsh industrial environments and FTTx/FTTH
applications. It has corrosion-resistant, waterproof, and dustproof protection and easy FTTx installation
and termination using existing hardware and installation methods for drops to homes and businesses.
This article provides some knowledge about pre-connectorized patchcord (GJXH).
What is a Pre-Connectorized Patchcord (GJXH)?
Pre-connectorized patchcord (GJXH) is a small waterproof SC/APC connector. Built-in SC
connector core, its plastic enclosure is resistant to high and low temperatures, acid and alkali
corrosion, and anti-UV. A waterproof rubber gasket enables it to deliver IP68 waterproof
performance. It applies to 2×3/ 3.0/5.0mm FTTH drop and round cables.
2. Email: ics@suntelecom.cn Skype: suntelecom.s01 Whatsapp: +86 21 6013 8637
Cable Construction
FTTH drop cable(GJXH) uses a butterfly flat structure, and the optical fiber unit is positioned in the
center. Two parallel fiber-reinforced plastic (FRP) or steel wire strength members are placed at the
two sides. Then, the cable is completed with LSZH sheath. FTTH drop cable can be installed
aerially, underground, or buried. It has good crush resistance and tensile strength, low smoke,
zero halogens (LSZH) sheath, simple structure, lightweight and flexible. It is suitable for indoor
application.
Features and Benefits
Low insertion loss and high return loss
High reliability, flexibility, and durability
Good crush resistance ensured by parallel strength member
Good tensile strength ensured by steel wire
3. Email: ics@suntelecom.cn Skype: suntelecom.s01 Whatsapp: +86 21 6013 8637
Waterproof and dustproof protection
Simple structure, lightweight, and easy to use
LSZH sheath, wall seal design, and spiral bayonet
Applications
Pre-connectorized patchcord (GJXH) is used in telecommunication networks, FTTx (FTTH, FTTA),
CATV networks, LAN, MAN, WAN, PON, data communications networks, test equipment, etc.
Conclusion
Pre-connectorized patchcord (GJXH) reduces cable installation time, saves money, is easy to
operate, and is durable. In addition, it provides a robust and sealed connection solution for
FTTH/FTTA connectivity and accelerates FTTx subscriber connections.
Sun Telecom specializes in providing one-stop total fiber optic solutions for all fiber optic
application industries worldwide. Contact us if you have any needs.