Automatic Shoe Size Scanner was created to measure the
size of foot with three different size of country. It is an innovated
project that has been updated from the manual size to an
automatic. Automatic Shoe Size Scanner use infrared sensor to
detect the foot size. Technically, this project is innovated to
produce output easier in a short term of time using most
effective way and will attract more profit to the users.
 Create a device using a sensor as the main com
ponent to scan the size and set as the input..
 The device can display the output at the 7 segment.
 The displayment of size in three different
measurement according to the country.
(UK, US, Japan)
From overall, Automatic Shoe Size Scanner was been detail examination.
Based on the examination, this inovation device has it’s own capability or
advantage because it was built with it’s own function that was created based own
the newest or up to dated communication technology. Automatic Shoe Size
Scanner system was innovated using arduino and infrared sensor. A program of
arduino was create using arduino application and it’s code which was very
important that needed in to filll the contain in making the project ran
successfully. In this project the arduino that was used was arduino nano.
By using Infrared as this project’s sensor, it’s radiation extends from the nominal
red edge of the visible spectrum at 700 nanometers (nm) to 1 mm. This range of
wavelengths corresponds to a frequency range of approximately 430 THz down
to 300 GHz. Additional size were add that according to three country that were
UK, US and Japan.
NAMA : FARAH AWATIF BINTI MAT HASSAN NAMA : NOR ILLANI NAJWA BINTI ABD HAMID
NOAH
MySEL-T1-006

Poster farah 2

  • 1.
    Automatic Shoe SizeScanner was created to measure the size of foot with three different size of country. It is an innovated project that has been updated from the manual size to an automatic. Automatic Shoe Size Scanner use infrared sensor to detect the foot size. Technically, this project is innovated to produce output easier in a short term of time using most effective way and will attract more profit to the users.  Create a device using a sensor as the main com ponent to scan the size and set as the input..  The device can display the output at the 7 segment.  The displayment of size in three different measurement according to the country. (UK, US, Japan) From overall, Automatic Shoe Size Scanner was been detail examination. Based on the examination, this inovation device has it’s own capability or advantage because it was built with it’s own function that was created based own the newest or up to dated communication technology. Automatic Shoe Size Scanner system was innovated using arduino and infrared sensor. A program of arduino was create using arduino application and it’s code which was very important that needed in to filll the contain in making the project ran successfully. In this project the arduino that was used was arduino nano. By using Infrared as this project’s sensor, it’s radiation extends from the nominal red edge of the visible spectrum at 700 nanometers (nm) to 1 mm. This range of wavelengths corresponds to a frequency range of approximately 430 THz down to 300 GHz. Additional size were add that according to three country that were UK, US and Japan. NAMA : FARAH AWATIF BINTI MAT HASSAN NAMA : NOR ILLANI NAJWA BINTI ABD HAMID NOAH MySEL-T1-006