3. WEARABLE DISPLAY
Augmented and virtual reality wearable (early models coming soon)
Ergonomic head mount
Integrated touchpad or buttons
Custom field of view (FOV), optic eye box dial, focal length dial, lens
interpupillary distance (IPD) dial
Vented enclosure
Radial-fin aluminum faceplate
Supplemental micro-mechatronic sensors (IMU/MEMS)
Hygienic foam or soft rubber liners
Aesthetic form and colors
Modular features and upgrade options
4. SMART MEDIA DVR
Cisco set-top boxes
Early Explorer 8000 model shown here
Responsibility: Fascia, front panel, lens, chassis, I/O backplane,
button/switch array, circuit cards, board-level shields, RF/EMI, EMC, ESD,
thin films/FPC, light pipe, LED display, IR optic sensor, card reader,
embedded modem, other mounted hardware
Click Here for Product Page
5. MOBILE DEVICE
Mitsubishi phones
Trium G320 model shown here
Responsibility: Rear case, front cover, face plate/IMD lens, LCD/holder,
LED backlight, keypad, membrane switch, PCBA, RF/EMI shielding, Li-ION
battery pack, interconnects, electrical contacts, audio gasket/acoustic
vent
*Note: MCEA was consolidated under the Mitsubishi Electric USA brand
and no longer develops mobile phones in the USA.
Click Here for Mitsubishi Website
6. Motorola phones
M75 (left) and Star-tac (right) models shown here
Responsibility: Rear housing, IMD lens, keypad, membrane switch,
grommets/plugs, integrated components (microphone, receiver, speaker,
alert vibrator, and headphone jack), labels, universal wall adapter, battery
charger
Click Here for Motorola Website
MOBILE DEVICE
7. OSI patient touchscreen health monitor (all-in-one)
Qube model shown here
Responsibility: Rear enclosure, frame, CPU front panel assembly (lock
handle, liquid IP), image rebranding
Click Here for OSI Healthcare Website
Click Here for Product Page
Watch Company Video
PORTABLE HEALTH MONITOR
8. Sony high definition television
Bravia model shown here
Responsibility: Rear cover, frame, DVT, VVQ support
Click Here for Product Page
HDTV
9. GE Smartmeter
Residential I-210 model shown here
Responsibility: Back sealed enclosure, thin film/FPC, PCBA, RF/EMI
shields, embedded modem, wireless antenna, other integrated hardware
Click Here for Product Page
WIRELESS SMARTMETER
10. Indyme "Help Button“ call box
Target retail model shown here
Responsibility: Top enclosure, bottom outdoor/sealed enclosure, custom
o-ring, PCBA, thin film/FPC, PCBA, button mechanism, battery holder,
electrical contacts, embedded modem, LDS/MID wireless antenna, other
integrated hardware
Click Here for Product Page
WIRELESS INTERCOM