Pornchanida chinjantuek (21 a) 21 03-12
•
0 likes•124 views
This weekly report summarizes the progress of a multidisciplinary engineering workshop group called KID-WA. The report focuses on studying RFID readers and passive tags. It describes the internal structure of passive tags, including an analog front-end, digital control unit, and memory component. It also lists the strengths of using passive tags, such as their small size and growing popularity. The next steps are to present a circuit summary to make the designed system work as intended.
Report
Share
Report
Share
Download to read offline
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 21, 2012
Name-Surname Pornchanida Chinjantuek
Student ID.53211821
Group Name KID-WA
Engineering Kittipong(03), Jindarat(05), Natthakan(09),
Team Members Tussanee(12), Nuttreewan(18), Wijak(27),
Kittapas(34),P’ Aote, P’ Lin, P’ Bell, P’ Aun,
P’ M, Joer
Product Design P’kong, P’Joy, P’Tong, P’Aru
Team Members
Weekly Progress
This week, I was responsible for the RFID Reader. For that I have studied in the form of circuit inside
and the nature of work. The characteristics of the tag to be used in the work. The tag will be used
as the passive. Tag this type of operating without an external source. Because, It is within this range
of induction generator is a small built-in power supply. The reading is not very far. Depending on
the power of the transmitter and the radio frequency being used. The internal structure of the IC
tag is composed of three parts. Such Analog Front-End, Digital Control Unit, Memory, which may be
a ROM or EEPROM.
Figure 1. The internal format of the Tag a Passive.
Engineering Analysis
Strong Point
- Is small
- Is beginning to use be popular in the current
Week Point
- Not found
Next Week Job
- Presents circuits summary all work to make it work as designed.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/pornchanidachinjantuek21a21-03-12-120320223109-phpapp02/85/Pornchanida-chinjantuek-21-a-21-03-12-1-320.jpg)
Recommended
Resume
This document is a resume for Gaurang Prabhakar Narvekar seeking an internship or full-time position in digital/analog/RF circuit design. He has a MS in Electrical and Computer Engineering from Georgia Tech and a BE in Electronics Engineering from Mumbai University. His relevant experience includes projects in DFE design, SRAM design, wireless transceiver design, and IC fabrication. He also has work experience as a software engineer at Accenture.
22 mar 2012 53211838
This weekly report summarizes the progress of the Happy361° engineering team. It discusses learning about sound modules and SD cards. Circuit diagrams show an SD card circuit that can be used with a module powered by either USB or 3.3V SD card. The strong point is its finished, quick-use module with an SD card. The weak point is lacking an SD card socket and audio amplifier circuit. Next week's task is to learn about audio amplifier circuits.
Josu00
Este documento proporciona 10 recomendaciones para usar TIC en la educación secundaria. Explica que la tecnología puede ayudar a aprender más y mejor seleccionando información para convertirla en conocimiento. También da razones para usar TIC como optimizar el aprendizaje, controlar el progreso de los estudiantes y fomentar la autoestima. Recomienda comenzar con actividades sencillas que aporten valor y sean fáciles de implementar.
Pv active power filter combination supplies power to nonlinear load and compe...
The photovoltaic (PV) generation is increasingly popular nowadays, while typical loads require more high-power quality. Basically, one PV generator supplying to nonlinear loads is desired to be integrated with a function as an active power filter (APF). In this paper, a three-phase three-wire system, including a detailed PV generator, dc/dc boost converter to extract maximum radiation power using maximum power point tracking, and dc/ac voltage source converter to act as an APF, is presented. The instantaneous power theory is applied to design the PV-APF controller, which shows reliable performances. The MATLAB/Simpower Systems tool has proved that the combined system can simultaneously inject maximum power from a PV unit and compensate the harmonic current drawn by nonlinear loads.
GLOSARIO
Este documento presenta un glosario de 29 términos relacionados con estrategias didácticas y competencias comunicativas. Define conceptos como aprendizaje colaborativo, diagnóstico, destrezas comunicativas, habilidades del pensamiento, métodos, procedimientos algorítmicos, y situaciones didácticas. El glosario parece ser parte de una asignatura sobre estrategias didácticas con propósitos comunicativos.
PROYECTO DIDÁCTICO
El documento lista los nombres de 6 integrantes de un grupo. Luego describe brevemente las clases activas, destacando que se enfocan en enseñar contenidos de manera flexible a través de actividades planeadas y evaluaciones de aprendizaje. También menciona la importancia de integrar contenidos de manera articulada para darle sentido al aprendizaje y permitir la participación de todos los estudiantes.
Francisco javier fernandez disfrutando de olavarría
Los invito a disfrutar maravillosos lugares de Olavarría. Javier Fernandez
http://www.flickr.com/people/javier_fernandez/
Recommended
Resume
This document is a resume for Gaurang Prabhakar Narvekar seeking an internship or full-time position in digital/analog/RF circuit design. He has a MS in Electrical and Computer Engineering from Georgia Tech and a BE in Electronics Engineering from Mumbai University. His relevant experience includes projects in DFE design, SRAM design, wireless transceiver design, and IC fabrication. He also has work experience as a software engineer at Accenture.
22 mar 2012 53211838
This weekly report summarizes the progress of the Happy361° engineering team. It discusses learning about sound modules and SD cards. Circuit diagrams show an SD card circuit that can be used with a module powered by either USB or 3.3V SD card. The strong point is its finished, quick-use module with an SD card. The weak point is lacking an SD card socket and audio amplifier circuit. Next week's task is to learn about audio amplifier circuits.
Josu00
Este documento proporciona 10 recomendaciones para usar TIC en la educación secundaria. Explica que la tecnología puede ayudar a aprender más y mejor seleccionando información para convertirla en conocimiento. También da razones para usar TIC como optimizar el aprendizaje, controlar el progreso de los estudiantes y fomentar la autoestima. Recomienda comenzar con actividades sencillas que aporten valor y sean fáciles de implementar.
Pv active power filter combination supplies power to nonlinear load and compe...
The photovoltaic (PV) generation is increasingly popular nowadays, while typical loads require more high-power quality. Basically, one PV generator supplying to nonlinear loads is desired to be integrated with a function as an active power filter (APF). In this paper, a three-phase three-wire system, including a detailed PV generator, dc/dc boost converter to extract maximum radiation power using maximum power point tracking, and dc/ac voltage source converter to act as an APF, is presented. The instantaneous power theory is applied to design the PV-APF controller, which shows reliable performances. The MATLAB/Simpower Systems tool has proved that the combined system can simultaneously inject maximum power from a PV unit and compensate the harmonic current drawn by nonlinear loads.
GLOSARIO
Este documento presenta un glosario de 29 términos relacionados con estrategias didácticas y competencias comunicativas. Define conceptos como aprendizaje colaborativo, diagnóstico, destrezas comunicativas, habilidades del pensamiento, métodos, procedimientos algorítmicos, y situaciones didácticas. El glosario parece ser parte de una asignatura sobre estrategias didácticas con propósitos comunicativos.
PROYECTO DIDÁCTICO
El documento lista los nombres de 6 integrantes de un grupo. Luego describe brevemente las clases activas, destacando que se enfocan en enseñar contenidos de manera flexible a través de actividades planeadas y evaluaciones de aprendizaje. También menciona la importancia de integrar contenidos de manera articulada para darle sentido al aprendizaje y permitir la participación de todos los estudiantes.
Francisco javier fernandez disfrutando de olavarría
Los invito a disfrutar maravillosos lugares de Olavarría. Javier Fernandez
http://www.flickr.com/people/javier_fernandez/
Organizador gráfico que identifique las características de las estrategias di...
Organizador gráfico que identifique las características de las estrategias di...Kimberly Flores zatarain
Este documento describe varias estrategias didácticas, incluyendo Aprendizaje Basado en Problemas, Proyectos, Aprendizaje Situado, Exposición Didáctica, Aprendizaje Colaborativo y Situación Didáctica. Cada estrategia define los roles del docente y los estudiantes, cómo planificar y evaluar actividades, y cómo promueven el aprendizaje significativo y centrado en el estudiante.Marketing Exellence -Ebay
The document discusses listing fees for an item sold for $60. A fee of 8.75% would be charged on the first $25 of the sale price, and a fee of 3.25% would be charged on the next $35, between $25 and $60.
Presentación
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a las transacciones con bancos rusos clave y la prohibición de la venta de aviones y equipos a Rusia. Los líderes de la UE esperan que las sanciones aumenten la presión económica sobre Rusia y la disuadan de continuar su agresión contra Ucrania.
INTS 3300 Annotated Bibliography
The document discusses several studies related to personalizing firearms through biometric technology to allow only authorized users to operate them. It summarizes research on handgrip recognition, terahertz and infrared imaging to identify concealed weapons, 3D printing and legal issues, banning guns on school/college campuses, and algorithms for verifying a user's handgrip pattern over time. The studies examined techniques like maximum pairwise comparison and local binary hand shape patterns to accurately distinguish authorized individuals while accounting for variations in grip pressure.
2° jornada de práctica
Este documento presenta los resultados de tres secuencias didácticas realizadas en una jornada de práctica en el Jardín de Niños "Josefina Ramos" sobre pensamiento matemático. La primera actividad trató de clasificar imágenes de seres vivos e inertes. La segunda utilizó un cuento y una regla para medir longitud y ancho. La tercera usó una balanza para comparar pesos de objetos. No se pudo aplicar un juego interactivo debido a la pérdida de tiempo por una suspensión de labores.
Olavarria en el Dakar 2013. Francisco Javier Fernandez
Juan J. Barbery representará a la ciudad de Olavarría en el Rally Dakar 2013 en Sudamérica. El Rally Dakar es una de las carreras de rally más importantes del mundo que atraviesa diferentes países. Barbery competirá en la categoría de motos y buscará terminar con éxito la carrera y llevar el nombre de Olavarría a lo más alto.
Teletrabajo en la administración pública (ley servir
La ley que regula el teletrabajo en el Perú es la Ley N° 30036 y su reglamento es el Decreto Supremo N° 017-2015-TR. El teletrabajo es una modalidad de trabajo caracterizada por el uso de tecnologías de la información y comunicaciones sin presencia física del trabajador en la empresa. Los principios que rigen el teletrabajo son la voluntariedad, reversibilidad, igualdad de trato y conciliación entre la vida personal y laboral. Se dará preferencia al teletrabajo para poblaciones
Se 003 t19 excavacion rev 01
Este documento establece los requisitos de seguridad para la excavación. Detalla las responsabilidades del personal, define términos clave como excavación, apuntalamiento e instalaciones subterráneas, y especifica normas como la clasificación del suelo, pruebas de aire, protección de bordes, y uso de equipo de protección personal. El objetivo es proteger la seguridad y salud de todos durante trabajos de excavación.
Review: Music rights awareness Rwanda
Nicklas Molinder is an established Swedish pop music songwriter and producer. He is the co-founder of the Music Rights Awareness organisation whose aim is perfectly illustrated in the name of his organisation. Here is a review of a talk/workshop with music creators in Rwanda.
Erfolgreiche Facebook-Strategien für gesetzliche Krankenversicherer
Aktuelle Studie von HEUTE UND MORGEN untersucht Potenziale und Erfolgstreiber der Kommunikation der gesetzlichen Krankenversicherungen auf Facebook.
How Startups Gain and Maintain Traction- Chris Schelzi
The definition of traction is "Quantitative evidence of customer demand” - Naval Ravikant, AngelList
That is what this presentation is about. The how-to guide on finding, building, and growing your specific traction channel.
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...Kimberly Flores zatarain
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REGULARES QUE PRESENTEN ALGUNA DISCAPACIDAD EDUCATIVA ESPECIAL PROYECTO ESPAÑOL
Este documento describe una práctica social del lenguaje para elaborar un tríptico sobre la prevención del bullying en la escuela. El objetivo es que los estudiantes compartan sus trípticos con la comunidad escolar. La práctica consiste en 8 sesiones para explorar el tema a través de lecturas, discusión de casos, e investigación. Los estudiantes analizarán diferentes tipos de violencia, medidas de prevención, y elaborarán un tríptico con la información recopilada.
Weekly report template (2)
The weekly report summarizes the progress of an engineering student group called 361 degrees. They have been working on a circuit project involving an MP3 module, memory, and amplifier. The MP3 module is functioning effectively but connecting the full circuit to test it has posed challenges. Next week, the group aims to integrate a microcontroller to trigger the MP3 module with a switch. Figures 1 and 2 show the memory socket and memory component of the circuit design.
54261524_02
This weekly report from an engineering student group describes their progress on a multi-function air purifier project. The group aims to design a machine that purifies air and provides relaxation. They are working to combine four operating modes into a single circuit. The engineering team is extracting data from memory cards to understand device functions and applications, such as MP3 modules and power amplifiers. Their strong point is combining all operating modes, while their weakness is communication within the group. Next steps are to finish integrating all functions onto a printed circuit board.
54261524_2
This weekly report from an engineering workshop group describes their progress on developing an air purifier. The group, called 361 degrees, is divided into an engineering team and product design team. This week they have made progress combining all the purifier's modes into a single circuit. Their next steps are to finish the circuit board and ensure all functions work normally. The report includes figures of modules used and notes on engineering knowledge gained about components like the MP3 module, power amplifier, and SD card.
54261524_02
The weekly report summarizes the progress of a multidisciplinary student workshop group called 361 degrees. The concept for their product is a machine that relaxes and makes one comfortable. They are working on an air purifier with 4 modes that will continuously operate when selected. The engineering team is extracting data from memory cards to understand the functions and applications of their device. Their strong point is combining all the circuit modes together but their weak point was lack of communication. Their next steps are to get all functions working normally and focus on the printed circuit board.
More Related Content
Viewers also liked
Organizador gráfico que identifique las características de las estrategias di...
Organizador gráfico que identifique las características de las estrategias di...Kimberly Flores zatarain
Este documento describe varias estrategias didácticas, incluyendo Aprendizaje Basado en Problemas, Proyectos, Aprendizaje Situado, Exposición Didáctica, Aprendizaje Colaborativo y Situación Didáctica. Cada estrategia define los roles del docente y los estudiantes, cómo planificar y evaluar actividades, y cómo promueven el aprendizaje significativo y centrado en el estudiante.Marketing Exellence -Ebay
The document discusses listing fees for an item sold for $60. A fee of 8.75% would be charged on the first $25 of the sale price, and a fee of 3.25% would be charged on the next $35, between $25 and $60.
Presentación
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a las transacciones con bancos rusos clave y la prohibición de la venta de aviones y equipos a Rusia. Los líderes de la UE esperan que las sanciones aumenten la presión económica sobre Rusia y la disuadan de continuar su agresión contra Ucrania.
INTS 3300 Annotated Bibliography
The document discusses several studies related to personalizing firearms through biometric technology to allow only authorized users to operate them. It summarizes research on handgrip recognition, terahertz and infrared imaging to identify concealed weapons, 3D printing and legal issues, banning guns on school/college campuses, and algorithms for verifying a user's handgrip pattern over time. The studies examined techniques like maximum pairwise comparison and local binary hand shape patterns to accurately distinguish authorized individuals while accounting for variations in grip pressure.
2° jornada de práctica
Este documento presenta los resultados de tres secuencias didácticas realizadas en una jornada de práctica en el Jardín de Niños "Josefina Ramos" sobre pensamiento matemático. La primera actividad trató de clasificar imágenes de seres vivos e inertes. La segunda utilizó un cuento y una regla para medir longitud y ancho. La tercera usó una balanza para comparar pesos de objetos. No se pudo aplicar un juego interactivo debido a la pérdida de tiempo por una suspensión de labores.
Olavarria en el Dakar 2013. Francisco Javier Fernandez
Juan J. Barbery representará a la ciudad de Olavarría en el Rally Dakar 2013 en Sudamérica. El Rally Dakar es una de las carreras de rally más importantes del mundo que atraviesa diferentes países. Barbery competirá en la categoría de motos y buscará terminar con éxito la carrera y llevar el nombre de Olavarría a lo más alto.
Teletrabajo en la administración pública (ley servir
La ley que regula el teletrabajo en el Perú es la Ley N° 30036 y su reglamento es el Decreto Supremo N° 017-2015-TR. El teletrabajo es una modalidad de trabajo caracterizada por el uso de tecnologías de la información y comunicaciones sin presencia física del trabajador en la empresa. Los principios que rigen el teletrabajo son la voluntariedad, reversibilidad, igualdad de trato y conciliación entre la vida personal y laboral. Se dará preferencia al teletrabajo para poblaciones
Se 003 t19 excavacion rev 01
Este documento establece los requisitos de seguridad para la excavación. Detalla las responsabilidades del personal, define términos clave como excavación, apuntalamiento e instalaciones subterráneas, y especifica normas como la clasificación del suelo, pruebas de aire, protección de bordes, y uso de equipo de protección personal. El objetivo es proteger la seguridad y salud de todos durante trabajos de excavación.
Review: Music rights awareness Rwanda
Nicklas Molinder is an established Swedish pop music songwriter and producer. He is the co-founder of the Music Rights Awareness organisation whose aim is perfectly illustrated in the name of his organisation. Here is a review of a talk/workshop with music creators in Rwanda.
Erfolgreiche Facebook-Strategien für gesetzliche Krankenversicherer
Aktuelle Studie von HEUTE UND MORGEN untersucht Potenziale und Erfolgstreiber der Kommunikation der gesetzlichen Krankenversicherungen auf Facebook.
How Startups Gain and Maintain Traction- Chris Schelzi
The definition of traction is "Quantitative evidence of customer demand” - Naval Ravikant, AngelList
That is what this presentation is about. The how-to guide on finding, building, and growing your specific traction channel.
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...Kimberly Flores zatarain
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REGULARES QUE PRESENTEN ALGUNA DISCAPACIDAD EDUCATIVA ESPECIAL PROYECTO ESPAÑOL
Este documento describe una práctica social del lenguaje para elaborar un tríptico sobre la prevención del bullying en la escuela. El objetivo es que los estudiantes compartan sus trípticos con la comunidad escolar. La práctica consiste en 8 sesiones para explorar el tema a través de lecturas, discusión de casos, e investigación. Los estudiantes analizarán diferentes tipos de violencia, medidas de prevención, y elaborarán un tríptico con la información recopilada.
Viewers also liked (18)
Organizador gráfico que identifique las características de las estrategias di...
Organizador gráfico que identifique las características de las estrategias di...
Olavarria en el Dakar 2013. Francisco Javier Fernandez
Olavarria en el Dakar 2013. Francisco Javier Fernandez
Teletrabajo en la administración pública (ley servir
Teletrabajo en la administración pública (ley servir
En Olavarría, Javier Fernandez les propone un lugar encantador
En Olavarría, Javier Fernandez les propone un lugar encantador
Erfolgreiche Facebook-Strategien für gesetzliche Krankenversicherer
Erfolgreiche Facebook-Strategien für gesetzliche Krankenversicherer
How Startups Gain and Maintain Traction- Chris Schelzi
How Startups Gain and Maintain Traction- Chris Schelzi
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...
LOGROS ALCANZADOS EN EL DISEÑO DE ESTRATEGIAS COMUNICATIVAS, PARA ALUMNOS REG...
Similar to Pornchanida chinjantuek (21 a) 21 03-12
Weekly report template (2)
The weekly report summarizes the progress of an engineering student group called 361 degrees. They have been working on a circuit project involving an MP3 module, memory, and amplifier. The MP3 module is functioning effectively but connecting the full circuit to test it has posed challenges. Next week, the group aims to integrate a microcontroller to trigger the MP3 module with a switch. Figures 1 and 2 show the memory socket and memory component of the circuit design.
54261524_02
This weekly report from an engineering student group describes their progress on a multi-function air purifier project. The group aims to design a machine that purifies air and provides relaxation. They are working to combine four operating modes into a single circuit. The engineering team is extracting data from memory cards to understand device functions and applications, such as MP3 modules and power amplifiers. Their strong point is combining all operating modes, while their weakness is communication within the group. Next steps are to finish integrating all functions onto a printed circuit board.
54261524_2
This weekly report from an engineering workshop group describes their progress on developing an air purifier. The group, called 361 degrees, is divided into an engineering team and product design team. This week they have made progress combining all the purifier's modes into a single circuit. Their next steps are to finish the circuit board and ensure all functions work normally. The report includes figures of modules used and notes on engineering knowledge gained about components like the MP3 module, power amplifier, and SD card.
54261524_02
The weekly report summarizes the progress of a multidisciplinary student workshop group called 361 degrees. The concept for their product is a machine that relaxes and makes one comfortable. They are working on an air purifier with 4 modes that will continuously operate when selected. The engineering team is extracting data from memory cards to understand the functions and applications of their device. Their strong point is combining all the circuit modes together but their weak point was lack of communication. Their next steps are to get all functions working normally and focus on the printed circuit board.
54261510 3
This weekly report summarizes the progress of a student group called Instinct working on a multidisciplinary engineering project. In the last week of the project, the student bought a device and battery but had limited time to work due to a job. They helped friends with battery charging and soldering a microcontroller programmed to connect to a sound chip. The circuit design is small and portable but uses cumbersome cables and has difficult soldering. Next week, the student will further develop the project and work with their team.
Week 4
This weekly report summarizes the progress of team KID-WA Company on their product design project. The team members are listed. The report discusses Radio-Frequency Identification (RFID) technology, explaining that RFID tags contain data and antennas that allow them to receive and respond to radio signals from readers. It describes the two main types of RFID tags - active tags with batteries and passive tags that receive power from readers. Figures illustrate a passive tag and RFID identification process. An engineering analysis covers the strong and weak points of passive tags. The next week's task is to research how to use RFID technology.
Weekly report 15.03.2012
The weekly report summarizes progress on using photo interrupter sensors to count mosquitoes. This week, the student researched photo interrupter sensors, which use an infrared emitter and photodetector to detect objects passing through a slot. There are different types that vary in slot width and depth for detecting different objects. The sensors are widely used for object detection and automatic counting. Next week, the student will design a high-performance circuit to count mosquitoes using the photo interrupter sensors for the project.
Weekly report
1. The weekly report summarizes the progress of engineering team KID-WA Company.
2. They have concluded their product design will involve a microwave and refrigerator, with duties divided among microcontroller development for the refrigerator.
3. The report describes the dsPIC30F4011 microcontroller being used, which has a 16-bit digital signal processor and supports various communication protocols.
จตุรพัฒน์ ภัควนิตย์ 53211804
The weekly report summarizes the progress of the Bork-Korn-Thai group working on a rice cooker control system project. The engineering team presented the block diagram of the rice cooker's functions. They researched temperature sensors, microcontrollers, power supplies, and heaters. The product aims to control AC output voltage using phase control of the AC power sine wave signal and a triac triggered by its gate. For next week, the group needs to complete the circuit design.
Weekly report
1. The weekly report summarizes the progress of engineering team KID-WA Company.
2. They have concluded their product design will include a microwave and refrigerator, with three team members assigned to develop the microcontroller for the refrigerator.
3. The report provides details on the IC dsPIC30F4011 microcontroller being used, including its capabilities and components included on the controller board.
Pornchanida chinjantuek (21 a) 1 03-12
This weekly report summarizes the progress of the KID-WA Company multidisciplinary workshop group. This week, the group presented on their progress and identified shortcomings. They learned about RFID technology, studying its strengths, limitations, and trends for future widespread use. RFID can store large amounts of data compared to barcodes but currently sees limited use. Next week, the group will present work progress and details of equipment used in each section.
Weekly report ครั้งที่ 1
This weekly report from an engineering workshop group discusses their progress on a product design project. The report provides an overview of the group members and their roles. It describes the concept of the project as an appliance with a power supply, amplifier, and controller to provide 4 modes of an air purifier. The engineering team is analyzing the functions of modules like the MP3 and SD card. They encountered a problem where the signal from the SD card was not available during a real test. Their next steps are to work on integrating each section and improving the sound quality of the connected speaker.
Weekly report template (3)
This weekly report summarizes the progress of a student group called Kid-wa company working on a product design project. The group is waiting for microcontroller parts and has printed circuit boards this week but not yet combined the microcontrollers with software. Their strong point is the printed circuits function properly, and their weakness is waiting on parts and needing to work more efficiently. Next week they aim to integrate the microcontrollers and software.
Weekly report 15.03.2012
The weekly report discusses progress on using a photo interrupter sensor to count mosquitoes. This week, the student researched photo interrupter sensors, which use an infrared emitter and photodetector to detect objects passing through a slot. There are different types that vary in slot width and depth for detecting different objects. The sensors are widely used for object detection and automatic counting. Next week, the student will design a high performance circuit to count mosquitoes using the photo interrupter sensor for the project.
นายวิจักษณ์ พรสุขวิทูร 53211827
The group is designing a smart refrigerator that will use a PIC microcontroller. The PIC was chosen because it can be used with the project and is easy to learn. It is inexpensive and has a built-in oscillator. Next week, the group will learn about addressing for the PIC microcontroller.
นายวิจักษณ์ พรสุขวิทูร 53211827
1) The student's group is designing a smart refrigerator that will use a PIC microcontroller.
2) PIC microcontrollers were chosen because they are inexpensive, can be used for the student's work now and in the future, and are easy to use.
3) The report discusses the PIC microcontroller family, presents diagrams of PIC microcontrollers, and analyzes the strengths and weaknesses of using a PIC for the smart refrigerator design.
53211830
The weekly report summarizes the progress of the Conthai group. They are working on designing an interface for a rice cooker and this week began researching information on interfaces. Their strong points are teamwork, logical thinking, and good relationships within the group. However, they lack information about interfaces in rice cookers. Their goal for next week is to complete the circuit design.
Weeklyreporttemplate3 120425042934-phpapp02
This weekly report discusses work on a product design project. The student removed old components from a microwave and checked the circuit board design. They tested connections using a multimeter to check for breaks in lines. Presentation of the project is scheduled for next week. Issues identified include potential breaks in the printed circuit board.
Weekly report template3
This weekly report discusses work done by the engineering team on a pet care product. The report indicates that this week, the team member removed old components from a microwave and checked the circuit board design and connections using a multimeter. Their next steps are to prepare a presentation. Issues identified include errors in the printed circuit board layout.
54261507 281 2
This weekly report summarizes the progress of an engineering team working on a product design project. The team is using a microcontroller to program an IC recorder to play sounds based on sensor readings of food items. The goal is to detect spoiled versus edible food and play warning sounds if food is too hot or cold. The report notes the use of an ATmega8 microcontroller and loudspeaker. In the engineering analysis, it identifies clear sounds as a strong point and some sound delay as a weakness to address next week through debugging.
Similar to Pornchanida chinjantuek (21 a) 21 03-12 (20)
More from Pornchanida Ansietà
Pornchanida chinjantuek (21 a) 22 03-12
The weekly report summarizes the progress of the KID-WA Company engineering team. It discusses using an RFID reader for their product design and analyzing the communication ranges of different RFID tags. The team is working on making circuits and layouts this week. Their analysis found that using UHF or higher RFID tags allows communication over long distances, which is a strong point of their design. Next week, the team will present all circuits and conclude their tasks.
Weekly report pornchanida chinjantuek (14 03-12)
This weekly report summarizes the progress of the KID-WA company engineering team. This week, the team studied the transmission of RFID (radio-frequency identification) and how radio waves are used to transmit data from tags attached to objects to interrogators or readers connected to an RFID system. The team analyzed the strengths of RFID being widely used in the future and did not find any weaknesses. Next week, the team will study transmitting additional information using RFID.
Pornchanida chinjantuek (21 a) 09 02-12
The student team worked on programming a PCB circuit board and discussed their refrigerator product design. They are designing a refrigerator that can read barcodes to set expiration dates and track cholesterol levels, and allow notes to be written on it. The refrigerator will have a touch interface. They learned about important refrigerator components like the compressor, heat exchangers, expansion valve. Their product is ideal for families but may take longer to work. Next week they will focus on circuit design and work planning.
Pornchanida chinjantuek (21 a) 09 02-12
The student team worked on programming a PCB circuit board and discussed their refrigerator product design. They are designing a refrigerator that can read barcodes to set expiration dates and track cholesterol levels, and allow notes to be written on it. The refrigerator will function using a touch system. They learned about important refrigerator components like the compressor, heat exchangers, expansion valve, and refrigerant. The product has potential to be ideal for families but may take longer to work than expected. Next week they will focus on circuit design and planning work divisions.
Pornchanida Chinjantuek 26 01-12
The weekly report summarizes the progress of the KID-WA Company multidisciplinary workshop team. The engineering team researched potential new functionality and technology for electrical appliances and furniture designed for the next 2-3 years. They explored refrigerators that can order fresh food deliveries, offer recipe suggestions, and self-clean. Microwaves were also considered with a focus on functions that engage family members. The team's strong points were helping families spend more time together and saving cooking time, while their main weakness was a limited number of proposed functionalities to explore further. Next steps include presenting work summaries.
Weekly report template (21A)
The weekly report summarizes the progress of the Hay company engineering team. They are designing a "sharechair" product that allows people to signal that an empty chair can be shared. The team discussed advantages like having a clear plan and workflow, and disadvantages like initially misunderstanding each other. Next week, they will discuss new technology ideas with group members to contribute to and improve the chair design.
สรุปกิจกรรมประจำวันที่ 10 ธันวาคม 2554
This document provides a 5-point list of practices related to electrical equipment including: 1) starting a delta motor, 2) operating a forward-reverse motor, 3) using digital practices with a PLC, 4) using analog practices with a PLC, and 5) working with cabinet equipment. The document also includes some numeric codes that may relate to part numbers or specifications.
สรุปกิจกรรมประจำวันที่ 10 ธันวาคม 2554
This document provides a 5-point list of practices related to electrical equipment including: 1) starting a delta motor, 2) operating a forward-reverse motor, 3) using digital practices with a PLC, 4) using analog practices with a PLC, and 5) working with cabinet equipment. The document also includes some numeric codes that may relate to part numbers or specifications.
More from Pornchanida Ansietà (15)
Recently uploaded
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Gursev Pirge, PhD
Senior Data Scientist - JohnSnowLabs
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Recently uploaded (20)
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Pornchanida chinjantuek (21 a) 21 03-12
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 21, 2012 Name-Surname Pornchanida Chinjantuek Student ID.53211821 Group Name KID-WA Engineering Kittipong(03), Jindarat(05), Natthakan(09), Team Members Tussanee(12), Nuttreewan(18), Wijak(27), Kittapas(34),P’ Aote, P’ Lin, P’ Bell, P’ Aun, P’ M, Joer Product Design P’kong, P’Joy, P’Tong, P’Aru Team Members Weekly Progress This week, I was responsible for the RFID Reader. For that I have studied in the form of circuit inside and the nature of work. The characteristics of the tag to be used in the work. The tag will be used as the passive. Tag this type of operating without an external source. Because, It is within this range of induction generator is a small built-in power supply. The reading is not very far. Depending on the power of the transmitter and the radio frequency being used. The internal structure of the IC tag is composed of three parts. Such Analog Front-End, Digital Control Unit, Memory, which may be a ROM or EEPROM. Figure 1. The internal format of the Tag a Passive. Engineering Analysis Strong Point - Is small - Is beginning to use be popular in the current Week Point - Not found Next Week Job - Presents circuits summary all work to make it work as designed. Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI