This document provides information about PROFILE22's part numbering system and profile identification for casement windows. It explains that profile part numbers indicate the foil finish, substrate color, and whether the foil is on one or both faces. Profiles are marked with information including the European standard, extrusion line, date and time of production, profile part number, climatic zone rating, and wall thickness. The document recommends checking the complete PROFILE22 product catalogue for additional parts.

1. 1:2
INTRODUCTION
PART NUMBERING SYSTEM:
Profile Identification and traceability:
The parts list comprises of most of the main parts within the profile and hardware range suitable for
CASEMENT WINDOWS.
However, due to the constant addition of new parts, it is recommended that the PROFILE22 Product
Catalogue, is also referred to, this document covers most of the parts within the complete PROFILE22
product range.
Profiles:
Foiled profiles are nominated in the following ways:
Example: A77010D-where prefix “A” is the foil finish in this case Antique Oak (Sherwood), “R” Rosewood
and “M” Mahogany.
Suffix “D” denotes that the product is foiled on a (decor), dark brown substrate. If the suffix is “C”, this
denotes that is on a (caramel) light brown substrate and where the suffix “W” is used followed by a
number as the example shows: A77010W/052, this denotes that the profile is foiled on white profile (one
face only) and the foil in this case Antique Oak is foiled on the 52mm large face.
Profiles are normally marked at approximately 1metre intervals and are marked thus:
22 BS EN :12608:2003 M 11 C 22990 21 1132207
European Normale
Standard to which
profile is produced
Extrusion
line where
manufactured
113
is the
113th day
of the year
2200 hrs
time
of production
07
is the year
Profile
Part Number
TITLESPECIFIC PRODUCT
CASEMENT
WINDOW
SUPP.
0
SECTION
CW 1:2
PARTS LIST
PAGE
001TECHNICAL MANUAL
Parts List
Climatic
Zone
Impact
Height
Class
Wall
Thickness
DATE REV.
NOV 2006 0 All information in this publication is provided for guidance only and is given in good faith. As it is company policy to continually improve products, methods and materials, changes of
specification may be made from time to time without prior notice. This statement does not affect your statutory rights.
All dimensions are nominal. DO NOT SCALE
© PROFILE22