This document provides specifications for the Nippon Pulse PFCL25 stepper motor series, including the PFCL25-24 and PFCL25-48 models. Key details include: - The motors have 24 or 48 steps per revolution, torque curves shown for various thread pitches and drivers/power configurations. - Specifications cover operating voltage and current, resistance, inductance, temperature ratings, weight, and dimensions. - Graphs show motor thrust in newtons and ounces versus pulses per second for different winding and driver combinations.

1. Nippon Pulse Stepper Motors
Slit sectional view
PFCL25
24C4 Torque Curve
PFCL25-24
-0.1
Type Of Winding Unipolar Bipolar
Steps Per Revolution* 24
Thread Pitch mm 0.48 0.96 1.2 0.48 0.96 1.2 0.48 0.96 1.2 0.48 0.96 1.2
Travel/Step mm 0.02 0.04 0.05 0.02 0.04 0.05 0.02 0.04 0.05 0.02 0.04 0.05
Effective Stroke mm 30 or 60
Force @ 200pps N 11 9.5 8 11 9.5 8 16 14 11 16 14 11
Rated Voltage V 12 5 12 5
Rated Current A/Ø 0.10 0.31 0.10 0.33
Resistance ohm/Ø 120 ±7% 16 ±7% 122 ±7% 15 ±7%
Inductance mH/Ø 26.4 3.6 58 6.9
Operating Temp. Range °C -10 to +50
Temperature Rise* °K 70
Weight g 60
PFCL25-48
Type Of Winding Unipolar Bipolar
Steps Per Revolution 48
Thread Pitch mm 0.48 0.96 1.2 0.48 0.96 1.2 0.48 0.96 1.2 0.48 0.96 1.2
Travel/Step mm 0.01 0.02 0.025 0.01 0.02 0.025 0.01 0.02 0.025 0.01 0.02 0.025
Effective Stroke mm 30 or 60
Force @ 200 pps N 22 17.5 15 22 17.5 15 31 22.5 20.5 31 22.5 20.5
Rated Voltage V 12 5 12 5
Rated Current A/Ø 0.10 0.31 0.10 0.33
Resistance Tolerance ohm/Ø 120 ±7% 16 ±7% 122 ±7% 15 ±7%
Inductance mH/Ø 32 4.4 71 8.5
Operating Temp. Range °C -10 to +50
Temperature Rise °K 70
Weight g 60
48C4 Torque Curve 24P4 Torque Curve 48P4 Torque Curve
Nippon Pulse America, Inc.
a subsidiary of Nippon Pulse Motor Co., Ltd.
www.nipponpulse.com
1-540-633-1677
PFCL25-48/PFCL25-24 LINEARSTEP®
Dimensions in mm
2-Ø3.3
35 ±0.2
*When the effective stroke is 30mm, the total length will be 60mm.
*When the effective stroke is 60mm, the total length will be 90mm.
UL1061
AWG28
Slit width: 1.1
Threaded shaft
Tip
(M3 depth 4)
Seat between rotor
(Manual operation
section)
200 ±10
30°
*Effective
stroke
Ø15 0
Ø5
Ø4
Ø8
Ø15
Ø25
40
30
10
Nippon Pulse America, Inc.
a subsidiary of Nippon Pulse Motor Co., Ltd.
Thrust (oz)
144
108
72
www.nipponpulse.com
1-540-633-1677
PFCL25-48P4 w/ Bipolar Constant Voltage
Driver: BCD404B1
Power: 12Vdc
Excitation: Full-step
(048)
(096)
(120)
0 100 200 300 400 500 600 700 800 (PPS)
Thrust (N)
20
36
Pull out
Thrust (oz)
25
20
PFCL25-24C4 w/ Unipolar Constant Voltage
15
90
72
54
(048)
(096)
(120)
Pull out
5 18
Nippon Pulse America, Inc.
a subsidiary of Nippon Pulse Motor Co., Ltd.
36
www.nipponpulse.com
1-540-633-1677
10
Thrust (N)
Driver: PS-2LD-25
Power: 12Vdc
Excitation: Full-step
0 100 200 300 400 500 600 (PPS)
40
30
10
Nippon Pulse America, Inc.
a subsidiary of Nippon Pulse Motor Co., Ltd.
Thrust (oz)
144
108
72
www.nipponpulse.com
1-540-633-1677
PFCL25-48C4 w/ Unipolar Constant Voltage
Driver: PS-2LD-5
Power: 12Vdc
Excitation: Full-step
0 100 200 300 400 500 600 700 800 (PPS)
Thrust (N)
20
36
(048)
(096)
(120)
Pull out
25
20
90
72
54
0 100 200 300 400 500 600 (PPS)
Nippon Pulse America, Inc.
a subsidiary of Nippon Pulse Motor Co., Ltd.
www.nipponpulse.com
1-540-633-1677
PFCL25-24P4 w/ Bipolar Constant Voltage
Driver: BCD404B1
Power: 12Vdc
Excitation: Full-step
(048)
(096)
(120)
Pull out
Thrust (oz)
10
Thrust (N)
15
36
5 18
* - All tin-can motor specifications are based on full-step constant voltage operation
Magnet type: Anisotropic
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com