Npcs (www.niir.org) newsletter –0312

NPCS Newsletter –0312
www.niir.org

Projects Covered in this Issue
 Caramel Colour From Sugar
 Coconut Processing Unit (Complex)
 Dry Cleaning And Laundry Unit
 Fastener (Automatic Cold Forge Process)
 Frozen Finger Chips
 Lead Acid Battery
 Mango Pickles
 PPR Pipes And Fittings
 Precipitated Calcium Carbonate
 Refined Oil (Cotton Seed Oil, Ground Nut Oil & Sunflower Oil)
 Shrimp Farming (Breeding In Sea Water)
 Unsaturated Polyester Resin
 2-Ethyl Hexanol (Octanol)
 Bleaching Powder
 Carbon Fibre
 Diphenyl Oxide
www.niir.org

Projects Covered in this Issue
 Methyl Isobutyl Ketone (Mibk)
 Methylamines
 Sodium Tri Poly Phosphate
 Super Absorbent Polymers
 Vitamin C
 Waste Tyre (Tire) Utilization
 Abs Resin
 Bismaleimide Triazine Resin (Bt Resin)
 Bisphenol A
 Chloroform
 Chloromethane
 Diethyl Sulphate
 Ethyl Silicate- Product Overview
 Isobutyric Acid
 Speciality Chemical –Isophorone
 Neopentyl Glycol
www.niir.org

CARAMEL COLOUR FROM SUGAR
 The global food colours market was worth an estimated
$1.45 billion in 2009 relays an August 2010 market report,
"The Global Market for Good Colours," by Leatherhead Food
Research. World usage of food colours is currently about
40,000-50,000 tons. Although current economic conditions
mean "annual growth levels have started to fall off sharply,"
says the report, by the middle of the next decade, the
global market value is expected to reach $1.6 billion, up
10% from its present levels. From 2005 to 2009, the global
market for natural colours increased almost 35% in value,
with much future growth expected to come from natural
colours and colouring foodstuffs. Foods account for some
67% of the food colouring global market, followed by soft
drinks (28%) and alcoholic beverages (5%).
 The demand of Caramel colour in the market is immense
and therefore its market position is splendid. Hence it is an
excellent field to venture.
www.niir.org

COCONUT PROCESSING UNIT
(COMPLEX)
 India is the third largest coconut producing country in
the world .It contributes 15% of the area and 25% of
the production of coconut in the world. Coir and coir
products, milling copra and coconut oil are the major
commercial products produced in the country. In India
as much as 48% of the coconut production is used for
edible and religious purposes, 10% as tender coconut,
roughly 30% as milling copra for oil extraction, 8% for
the manufacture of edible copra and the rest is
processed into products like desiccated coconut and
coconut cream. The production of coir and coir products
constitutes 55% of the world output. India’s export trade
accounts for 30% of the total export trade in the world.
www.niir.org

DRY CLEANING AND LAUNDRY
UNIT
 Dry cleaning and laundry unit may come under the tiny scale
industry to small scale industry unit. Now a day there is a very good
export scope of garments. In garment industry there is requirement
of laundry unit or dry cleaning unit. Laundry and dry cleaning unit
growth is 5%, which is now, meet up by local operators. But due to
the rapid population growth and rapid modernization more laundry
and dry cleaning units are required to keep space with the social
demand. Any entrepreneur may launch this unit will be successful.
The present day sophisticated standard of living recognizes the
importance of cleanliness and smart dressings. It is due to this
reason that the modern human being has accepted dry cleaning as
a must for a smart look. Hospitality and healthcare are governing
growth in the Indian on premise laundry market. Laundry, today, is
very much an industry even within the Government policies.The
laundry market is growing at a good rate and more and more
establishments in both commercial and institutional sectors are
facing the challenge of choosing between an in-house laundry which
will give more control over cost and quality or outsourcing which will
allow them to focus on their core business.
www.niir.org

FASTENER
(AUTOMATIC COLD FORGE PROCESS)
 The Indian Fastener Industry is estimated to have a
domestic market of around INR 1500 crore. Automobile
industry is the biggest consumer of fasteners. Mild steel
fasteners are primarily manufactured by the unorganized
sector while the high tensile fasteners require superior
technology and dominated by companies in the
organized sector. The organized sector commands nearly
70 percent of the fasteners market while the rest is
controlled by the unorganized sector and imports.
www.niir.org

FROZEN FINGER CHIPS
 Frozen Food in India industry profile provides top-line qualitative
and quantitative summary information including: market share,
market size (value and volume 2006-10, and forecast to 2015). The
profile also contains descriptions of the leading players including key
financial metrics and analysis of competitive pressures within the
market. The market for frozen food in India increased at a
compound annual growth rate of 15.2% between 2004 and 2009.
The Indian frozen food market generated total revenues of $325.9
million in 2010, representing a compound annual growth rate
(CAGR) of 16.6% for the period spanning 2006-2010. The food
processing industry has been slated for accelerated growth. It is
projected to be a futuristic industry and it is anticipated that, over
the years, it will emerge as a leading player in the global markets.
As a result, the industry is seen to be witnessing feverish activity.
 Therefore the scope for this product is very bright. An entrepreneur
venturing into this project will find it very lucrative.
www.niir.org

LEAD ACID BATTERY
 Lead acid batteries are considered to have one of the
fastest global growth rates. Usage of lead acid battery is
expected to grow further with technological advancements
in the electric vehicles market. Although efforts are on to
develop a “miracle battery” for electric vehicles, lead acid
batteries are one of the few battery technologies that are
considered as the workhorses of today’s Electric Vehicle
fleet. The influx of cutting edge technology has brought
forth a new genre of long lasting, lead acid batteries
featuring smaller size and lightweight attributes. The global
market for Lead Acid Batteries (Automotive) is forecast to
reach US$15.4 billion by the year 2015, charged by
sustained demand from automobiles industry, specifically
the aftermarket/replacement market. Emergence of next-
generation electric vehicles (EVs) and hybrid electric
vehicles (HEVs) will further drive the market.
www.niir.org

MANGO PICKLES
 There is very good market demand of mango pickles.
This is manufactured by some well organized sector as
well as many unorganized private tiny and small scale
sector. There is scarcity of availability of green mangoes
throughout the year. It is mostly available in our country
in the month of April – August. Market demand almost
increases by 3% per annum which is actually population
growth rate. There is very good export demand in the
European countries as well as in the Middle East Asian
countries.
 Therefore the demand of mango pickle in the market is
enormous and therefore its market position is splendid.
Hence it is an excellent field to venture.
www.niir.org

PPR PIPES AND FITTINGS
 Considerable growth in the use of PPR (Random Copolymer
Polypropylene) pipe systems in new buildings has resulted
in a surging demand for PPR material in expanding markets
across Eastern Europe, North Africa, andAsia. According to
the relevant data plastic sheet, plastic pipe and plastic-steel
windows and doors are subject to market interest rate of
53% above market demand, an upward trend. In Western
Europe, the advantages of PPR pipes are sometimes
outweighed by the higher labour costs incurred when fitting
the systems, but, in markets with a lower cost of labour,
PPR’s advantages are driving a big increase in demand. As
per industry estimates, global demand for plastic pipe is
expected to increase 4.5% annually to 8.1 billion metres in
2012 in weight terms, consumption is projected to expand
4.6% per year to 18.1 million metric tons.
 The applications and demand of PPR pipes and fittings in
the market is immense and therefore its market position is
splendid. Hence it is an excellent field to venture.
www.niir.org

PRECIPITATED CALCIUM
CARBONATE
 Worldwide, almost 10 million tons of precipitated calcium
carbonate (PCC) is produced annually for use in a wide
range of end-use applications. Roughly 70% of the total
is consumed by the paper industry for the filling and
coating of paper. Large amounts of PCC are also used in
the filling of polymers, as a pigment in paint, and as a
thixotrope in sealant and plastisol formulations. In
addition, PCC with sufficient purity can be used for food
and pharmaceutical applications. Global demand for
Precipitated Calcium Carbonate (PCC) is forecast to grow
by an average of 4%py from around 13Mt in 2007 to
nearly 16Mt by 2012. Growth rates will be highest in the
paint (6%py) and rubber (4%py) industries though the
largest increases in terms of tonnage will be in paper
and paint.
www.niir.org

REFINED OIL
(COTTON SEED OIL, GROUND NUT OIL & SUNFLOWER OIL)
 The demand for edible oils in India has shown a steady growth at a
CAGR of 4.43% over the period from 2001 to 2011. The growth has
been driven by improvement in per capita consumption, which in
turn is attributable to rising income levels and living standards. In
terms of volumes, palm oil, soyabean oil and mustard oil are the
three largest consumed edible oils in India, with respective shares
of 46%, 16% and 14% in total oil consumption in 2010.The Indian
edible oil market is the world’s fourth-largest after the USA, China
and Brazil. A growing population, increasing rate of consumption
and increasing per capita income are accelerating the demand for
edible oil in India. India is a leading player in edible oils, being the
world’s largest importer and the world’s third-largest consumer.
Each year, India consumes over 10 million tons of edible oils. Edible
oils have a high penetration of 90% in India.
 Since the applications and demand of refined oil is immense
therefore the potential of the product is excellent. It is one of the
imperative fields to endeavour.
www.niir.org

SHRIMP FARMING
(BREEDING IN SEA WATER)
 The global shrimp industry has experienced phenomenal
growth over the last twenty-two years generating more
than 730,000 metric tons of farm cultured product
annually. This industry represents a market value
exceeding US$ 3.7-4.5 billion ($5.00-$6.00/kg) ex-farm.
World production of shrimp, both captured and farmed,
is about 6 million tons, of which about 60% enters the
world market. Shrimp is now the most important
internationally traded fishery commodity in terms of
value.
 Therefore the scope for Shrimp farming is very bright.
An entrepreneur venturing into this project will find it
very lucrative.
www.niir.org

UNSATURATED POLYESTER
RESIN
 Over the next 5 years, total unsaturated polyester resins
consumption across the globe is expected to continue strong growth
momentum at 6.3% CAGR. The unsaturated polyester resins market
is expected to reach US $ 5.8 billion by 2015. The demand for
polymers - thermosets, alloys, blends and composites - was
expected to rise to nearly 9.5 million TPA by the year 2011-12. The
main consumer segments of polymers - buildings and construction,
plasticulture, packaging, teletronics, transportation, domestic
consumer goods - will all require increasing petro-chemical inputs.
The expansion will not be limited to quantum; it will be supported
also by technology upgradation and higher value addition. UPR
market is expected to grow in near future because of new
applications and demands. As wind energy and construction market
have shown highest growth in last few years it is expected that, this
growth will facilitate unsaturated polyester resins industry and it will
continue the same performance and generate high revenue for the
UPR manufacturer. In Western Europe, annual growth of 7–8% is
forecast for unsaturated polyester resin consumption in this
segment during 2007–2012. Growth will be higher in Asia.
www.niir.org

BLEACHING POWDER
 The benefit of bleaching powder is that it is a solid which makes it
easier to apply as a disinfectant, whereas other bleaching agents
such as chlorine and sodium hypochlorite are gaseous and liquid
respectively. The demand for bleaching powder is likely to increase
in tune with the Indian economic and industrial growth pattern.
Considering the case exists create capacity for bleaching
power/calcium hypochlorite depending upon the regional demand
supply scenario. Firm tie up arrangement for the supply of chlorine
on long term basis is necessary. Capacity of bleaching powder
concentrate (available chlorine more than 70%) in the world is
270000 tonnes per annum. Capacity of bleaching powder
concentrate in China is 60000 tonnes per annum. The main
ingredient in bleaching powder concentrate is calcium hypochlorite.
Based on different production processes, bleaching powder
concentrate also contains calcium chloride or sodium chloride and
calcium hydroxide. The effective chlorine content is more than 60%.
By contrast, the effective chlorine content in conventional bleaching
powder is around 30%.
www.niir.org

CARBON FIBRE
 The global demand on carbon fiber composites was
valued at roughly US$10.8 billion in 2009, which
declined 8 to 10% from the previous year. It is expected
to reach US$13.2 billion by 2012 and to increase to
US$18.6 billion by 2015 with an annual growth rate of
7% or more. Strongest demands come from aircraft &
aerospace, wind energy as well as automotive industry.
Around90 percent of all commercial carbon fibers are
produced by the thermal conversion of PAN precursor
fibers. Commercially available PAN fibers are used as
precursors to produce carbon fibers in large tow counts,
having up to 24k filaments. Indian Import is around 3
metric tons.Consumption by other manufacturing
industries is growing even faster, by about 15% per
year.
www.niir.org

2-ETHYL HEXANOL (OCTANOL)
 2-Ethylhexanol is produced industrially by the aldol
condensation of n-butyraldehyde, followed by
hydrogenation of the resulting hydroxyaldehyde. About
2,500,000 tons are prepared in this way annually. The n-
butyraldehyde is made by hydroformylation of propylene,
either in a self-contained plant or as the first step in a fully
integrated facility. Most facilities make n-butanol and
isobutanol in addition to 2-ethylhexanol.The demand for oxo
alcohols would go up steadily in India in the coming years.
Considering the growth in demand for oxo alcohols, strong
case exists for capacity creation. Firm supply source for
propylene for the project is important. PVC is the important
user industry for phthalate plasticizers. The demand for
phthalate plasticizers would largely move in tune with the
performance and growth of the PVC industry. Indian
demand for octanol is estimated around 60,000 tonnes per
annum and estimated growth ratio of octanol is 7%.
www.niir.org

DIPHENYL OXIDE
 Present global production level of diphenyl ether is
around 65000 tonnes per annum. Diphenyl oxide, or
DPO, is a key raw material in the production of a variety
of industrial products such as surfactants, flame
retardants, fragrances, chemical intermediates and heat
transfer fluids. DPO is an essential ingredient used to
manufacture Therminol VP-1 heat transfer fluid, the heat
transfer fluid of choice for the solar industry. Global
demand of diphenyl oxide is increasing and hence its
production is likely to increase in next few years.
www.niir.org

METHYL ISOBUTYL KETONE
(MIBK)
 Considering the steady growth in demand and the
applications in thrust areas of growth, strong case exists
for capacity creation for MIBK. Surface coating market
and rubber (tyre) market would drive the demand for
MIBK. Growth rate of USA and Western Europe is
estimated to be 1% and that of Asia Pacific is estimated
to be 5% through 2014. Global consumption (period
2009) was 402,200 metric tons. Some applications
(especially antiozonants) are moving to Asia, particularly
China. MIBK consumption for antiozonants is forecast to
grow at an average annual rate of 4–5% in Asia and 0–
1% in the United States and Western Europe. World
MIBK consumption will grow slowly from 2007 to 2012.
www.niir.org

METHYLAMINES
 Considering the diversified application sector of
methylamines which are highly relevant to the Indian
industrial and economic growth pattern, demand for
methylamines is likely to go up steadily in India in the
coming years. The overall outlook for methylamines is
promising. This calls for additional capacity creation.
Indian demand for methylamines is estimated to be
50,000 tonnes per annum.Global installed capacity of
methylamines is estimated around 1.1 million tonnes per
annum.
www.niir.org

SODIUM TRI POLY PHOSPHATE
 Sodium Tripolyphosphate (STPP) is an inorganic sodium
salt, which is used as a vital auxiliary in synthetic
detergents sector. For several years, sodium
tripolyphosphate has been used as a major ingredient in
detergents, and played a vital role in enhancing the
performance of detergents. The market for STPP is
expected to benefit from the fact that phosphorus-free
assistants are not a complete substitute for phosphorus-
based assistants. In India, STPP predominantly finds
application in the production of detergents. The other
important areas of applications include ceramics and food
industries. The application areas are highly relevant to the
industrial and economic growth pattern. Therefore, the
demand for STPP would go up in tune with the overall
industrial and economic growth pattern. The global Sodium
Tripolyphosphate market is projected to reach 3.4 million
metric tons by the year 2015. Growth in the market is
driven by the sustained demand from detergents market.
www.niir.org

VITAMIN C
 The demand for Vitamin C is likely to go up steadily in
the coming years, in view of the expected growth of the
healthcare facilities in India. World production of
synthesized vitamin C is currently estimated at
approximately 110,000 tonnes annually. Global demand
for vitamin C for the period of 2010 is around 120,000
tonnes, global sales of Vitamin C is over US$1020 million
and growth rate in demand for Vitamin C is 3% per
annum. Vitamin C represents more than 50% of the
total production and sales of vitamins in the global
market. China holds around 80% of world production of
vitamin C. China plays a monopoly in the production of
Vitamin C
www.niir.org

SUPER ABSORBENT POLYMERS
 Demand for SAP has been rising steadily during the last
few decades. Global demand growth is forecast at 6%
per annum through 2016. This is a result of rising
demand for disposable diapers, primarily in countries
with rising disposable incomes and low current
penetration rate of SAP. Although smaller market in
comparison to diapers, strong growth is forecast to
continue in feminine hygiene products and in
incontinence products in developed regions, as a result
of efforts to produce slimmer, more efficient products.
The application of SAP, in optical cables in particular, is
expanding and the market prospect is excellent
www.niir.org

WASTE TYRE (TIRE)
UTILIZATION
 The market for waste tires has grown in the past
decade, and it is growing. The tires motorists drive on
today can be shredded and used as fuel, burned to make
fuel oil or pulverized into bits for fill in a football field or
a playground.
www.niir.org

ABS RESIN
 World consumption of ABS is projected to grow at an
average annual rate of about 4.0%, with rates of 5–
5.5% in China, India and Oceania; 4.0–4.7% in the
Middle East, Central and Eastern Europe, and Africa; and
3.2–3.9% in Indonesia, Mexico, Thailand, Malaysia, and
Central and South America. Indian demand of ABS resin
in 2010-2011 is estimated around 120,000 tons per
annum. Growth rate in demand through 2020 is
estimated to be 9% per annum. Global capacity will
increase 4% per year through 2012, to 9.8 million tons
per annum.The market has diverged into a general-
purpose sector, where cost and productivity are the most
important factors and engineering plastics sector is
driving most of the industry's growth.
www.niir.org

BISMALEIMIDE TRIAZINE RESIN
(BT RESIN)
 BT resin has become the preferred laminate material for
many manufacturers because of its high Tg, low
dielectric constant and good insulation properties. In
fact, BT is now apparently the standard substrate
material for BGA's, and is also being used in CSP
laminates. Japan accounts for an estimated 90% of
worldwide output of the product and MGC alone
accounts for 50%. PC Mitsubishi Gas Chemical and
Hitachi Chemical, boasting 90% global market share.
www.niir.org

BISPHENOL A
 Bisphenol A (BPA), phenolic resins and caprolactam were
the leading end use segments for phenol in 2010, with
2,761,915 tons, 2,181,698 tons and 1,001,903 tons of
demand, respectively, Together they accounted for more
than 70% of global phenol demand. In terms of the end
uses of phenol, a similar trend is expected to continue
throughout the forecast period till 2020.The growth in
demand for Bisphenol-A in India would be in tune with
the growth of the epoxy resin industry. Growth rate in
demand for Bisphenol-A through 2016 is estimated
around 9 % per annum.
www.niir.org

CHLOROFORM
 Globally, about 90-95% of the chloroform is used as a precursor for
HCFC-22, which is used in refrigerants and fluoropolymers such as
polytetrafluoro-ethylene (PTFE). The demand for HCFC-22 in
fluoropolymers is expected to witness growth, though the product’s
demand in emissive applications, such as refrigerants, is expected
to witness a gradual decline. However, growing environmental
concerns and implementation of stringent regulations have
contributed to a contraction in demand for HCFC-22 across majority
of the developed countries in the past decade. Indian production is
estimate 47000 metric tones per annum and global demand for
Chloroform is estimated around 0.66 million metric tonnes per
annum. The overall global consumption of chloroform is projected to
decline, owing to the adoption of stringent regulatory framework for
restricting the use of ozone depleting substances, such as HCFCs,
chlorofluorocarbons (CFCs), halons, and carbon tetrachlorides.
Global chloroform consumption is likely to be 0.64 million tonnes
per annum by 2015.
www.niir.org

CHLOROMETHANE
 In India there are four major producers of chloromethanes
with total combined capacity of 1.44 lakh tonnes.
Production of chloromethanes in the year 2009-2010 was
1.28 lakh tonnes, which increased to 1.44 lakh tonnes in
2010-2011 indicating 100 percent utilisation of installed
capacity. Total consumption of chloromethane [methyl
dichlorine (MDC) and chloroform] has increased from 4.02
lakh tonnes in 2005-2006 to 4.58 lakh tonnes in 2010-
2011, thereby registering a modest growth of 4 percent per
annum. The major application of MDC is in pharmaceuticals,
paint industry as paint remover and degreasing agent
followed by refrigerants, foam blowing agent and in
agrochemicals. However the consumption is likely to grow
at around 5% per annum and this rate of demand for
chloromethane is estimated to grow to around 5.82 lakh
tonnes in 2015-2016.
www.niir.org

DIETHYL SULPHATE
 Diethyl sulphate is predominantly used as an ethylating
agent in the manufacture of aromatic and aliphatic
ethers, amines, amides, esters and imides for dyestuff,
pharmaceutical and flavor synthesis. The Pharmaceutical
and Dyestuff industry represent the major sector of
applications for Diethyl sulphate. In such sectors, the
product is used asethylating and sulphonating agent.
Indian demand in the period April 2010 to March 2011is
estimated 8000 tons per annum and growth rate in
demand 6% to 7% per annum. Global demand is
estimated around 200,000 metric a tonne per annum
and global growth rate in demand is 2 to 3% per annum.
www.niir.org

ETHYL SILICATE- PRODUCT
OVERVIEW
 Ethyl silicate is manufactured mostly by integrated
process with metallurgical silicon as starting material.
The silicon tetrachloride method is inherently prone to
trace metal contamination and process variability. Indian
production of ethyl silicate is around1200 tonnes per
annum. Total demand for ethyl silicate including paint
and investment casting is 1500 tonnes per annum.
Imports for the year 2009-2010 of ethyl silicate is 160
tonnes per annum and exports for the year 2009-2010 is
of negligible quantity.
www.niir.org

ISOBUTYRIC ACID
 Isobutyric acid, also known as 2-methylpropanoic acid,
is a carboxylic acid with structural formula (CH3)2-CH-
COOH. It is found in the free state incarobs (Ceratonia
siliqua) and in the root of Arnica dulcis, and as an ethyl
ester in croton oil. Isobutyric acid is an isomer of n-
butyric acid; they have the same chemical formula C4H8
O2 but a different structure. Isobutyric acid cannot be
obtained by the fermentation but by the oxidation of
isopropyl alcohol with potassium bichromate and sulfuric
acid. Isobutyric acid melts at -47 oC and boils at 154 oC.
It is slightly soluble in water but soluble in ethanol, ether
and organic solvents. Butyric acid is a strong acid and
reacts with bases, strong oxidants and metals.
www.niir.org

SPECIALITY CHEMICAL –ISOPHORONE
 Isophorone is produced commercially by the catalytic
condensation of acetone at elevated temperature and
pressure and is then purified by distillation. The
worldwide production of isophorone is estimated to be in
the order of 100,000 tons per year.Production sites are
in the EU (Germany, France), the U.S., Japan and India.
Isophorone is widely used as a solvent for a number of
synthetic resins and polymers, as well as in special
application paints and printing inks. It is a chemical
intermediate and an important solvent in certain
herbicide formulations. The majority of the consumer
products containing isophorone are selective herbicides,
while professional use is focused on lacquers and
varnishes and solvents.
www.niir.org

NEOPENTYL GLYCOL
 Neopentyl Glycol (NPG) is shipped as flake, molten and
slurry. It is readily soluble at room temperature in water,
alcohols, glycol ethers, ketones and esters. Global
demand is around 0.5 million tonnes per annum. There
is growing demand for intermediates, particularly those
used in coating applications. Powder coatings based on
NPG show improved impact and scratch resistance, and
high gloss. Synthetic lubricants made from NPG provide
good lubricity and reduced corrosivity. Both of these
uses will grow. Global demand growth is forecast at
3.1% per year.
www.niir.org

An ISO 9001:2008 Company
www.niir.org

 One of the leading reliable names in industrial world for
providing the most comprehensive technical consulting
services
 We adopt a systematic approach to provide the strong
fundamental support needed for the effective delivery of
services to our Clients’ in India & abroad
www.niir.org

 Project Identification
 Detailed Project Reports/Pre-feasibility Reports
 Market Research Reports
 Technology Books and Directory
 Databases on CD-ROM
 Laboratory Testing Services
 Turnkey Project Consultancy/Solutions
 Entrepreneur India (An Industrial Monthly Journal)
www.niir.org

 We have two decades long experience in project
consultancy and market research field
 We empower our customers with the prerequisite know-
how to take sound business decisions
 We help catalyze business growth by providing
distinctive and profound market analysis
 We serve a wide array of customers , from individual
entrepreneurs to Corporations and Foreign Investors
 We use authentic & reliable sources to ensure business
precision
www.niir.org

Requirement collection
Thorough analysis of the project
Economic feasibility study of the
project
Market potential survey/research
Report Compilation
www.niir.org

 Public-sector Companies
 Corporates
 Government Undertakings
 Individual Entrepreneurs
 NRI’s
 Foreign Investors
 Non-profit Organizations, NBFC’s
 Educational Institutions
 Embassies & Consulates
 Consultancies
 Industry / trade associations
www.niir.org

 Ayurvedic And Herbal Medicines, Herbal Cosmetics
 Alcoholic And Non Alcoholic Beverages, Drinks
 Adhesives, Industrial Adhesive, Sealants, Glues, Gum &
Resin
 Activated Carbon & Activated Charcoal
 Aluminium And Aluminium Extrusion Profiles & Sections,
 Bio-fertilizers And Biotechnology
 Breakfast Snacks And Cereal Food
 Bicycle Tyres & Tubes, Bicycle Parts, Bicycle Assembling
www.niir.org

Cont…
 Bamboo And Cane Based Projects
 Building Materials And Construction Projects
 Biodegradable & Bioplastic Based Projects
 Chemicals (Organic And Inorganic)
 Confectionery, Bakery/Baking And Other Food
 Cereal Processing
 Coconut And Coconut Based Products
 Cold Storage For Fruits & Vegetables
 Coal & Coal Byproduct
www.niir.org

Cont…
 Copper & Copper Based Projects
 Dairy/Milk Processing
 Disinfectants, Pesticides, Insecticides, Mosquito
Repellents,
 Electrical, Electronic And Computer based Projects
 Essential Oils, Oils & Fats And Allied
 Engineering Goods
 Fibre Glass & Float Glass
 Fast Moving Consumer Goods
 Food, Bakery, Agro Processing
www.niir.org

Cont…
 Fruits & Vegetables Processing
 Ferro Alloys Based Projects
 Fertilizers & Biofertilizers
 Ginger & Ginger Based Projects
 Herbs And Medicinal Cultivation And Jatropha (Biofuel)
 Hotel & Hospitability Projects
 Hospital Based Projects
 Herbal Based Projects
 Inks, Stationery And Export Industries
www.niir.org

Cont…
 Infrastructure Projects
 Jute & Jute Based Products
 Leather And Leather Based Projects
 Leisure & Entertainment Based Projects
 Livestock Farming Of Birds & Animals
 Minerals And Minerals
 Maize Processing(Wet Milling) & Maize Based Projects
 Medical Plastics, Disposables Plastic Syringe, Blood Bags
 Organic Farming, Neem Products Etc.
www.niir.org

Cont…
 Paints, Pigments, Varnish & Lacquer
 Paper And Paper Board, Paper Recycling Projects
 Printing Inks
 Packaging Based Projects
 Perfumes, Cosmetics And Flavours
 Power Generation Based Projects & Renewable Energy
Based Projects
 Pharmaceuticals And Drugs
 Plantations, Farming And Cultivations
 Plastic Film, Plastic Waste And Plastic Compounds
 Plastic, PVC, PET, HDPE, LDPE Etc.
www.niir.org

Cont
 Potato And Potato Based Projects
 Printing And Packaging
 Real Estate, Leisure And Hospitality
 Rubber And Rubber Products
 Soaps And Detergents
 Stationary Products
 Spices And Snacks Food
 Steel & Steel Products
 Textile Auxiliary And Chemicals
www.niir.org

Cont…
 Township & Residential Complex
 Textiles And Readymade Garments
 Waste Management & Recycling
 Wood & Wood Products
 Water Industry(Packaged Drinking Water & Mineral
Water)
 Wire & Cable
www.niir.org

www.niir.org
Niir Project Consultancy Services
106-E, Kamla Nagar, New Delhi-110007, India.
Email: npcs.india@gmail.com , info@niir.org
Tel: +91-11-23843955, 23845654, 23845886
Mobile: +91-9811043595
Fax: +91-11-23841561

www.niir.org
https://www.linkedin.com/company/n
iir-project-consultancy-services
https://www.facebook.com/NIIR.ORG
https://www.youtube.com/user/NIIRp
roject
https://plus.google.com/+NIIRPROJE
CTCONSULTANCYSERVICESNewDelhi/p
osts
https://twitter.com/npcs_in
Follow Us

www.niir.org
For more information, visit us
at: www.niir.org

Npcs (www.niir.org) newsletter –0312

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (13)

Similar to Npcs (www.niir.org) newsletter –0312

Similar to Npcs (www.niir.org) newsletter –0312 (20)

Recently uploaded

Recently uploaded (20)

Npcs (www.niir.org) newsletter –0312