The newsletter discusses arc flash safety, noting that arc flash incidents occur frequently and can cause serious injury or death. It introduces ARC ARMOR equipment that helps protect against arc flash when servicing electrical panels. The document also announces that MJK Automation has become a subsidiary of Xylem, and that PSI Process and Equipment is an authorized distributor and service center for MJK products focused on instrumentation.

1. September 2012
PSI Newsletter
ISSUE HIGHLIGHTS
ZONE 1 Service Compartment Danger
Zone: Contains the most dangerous arc
flash potential and risk of electric
shock.
What is Arc Flash?
CSI Controls Inc.
Dear Readers.
This month we feature ARC ARMOR
equipment that helps protect from
MJK now a Arc Flash. With 5-10 arc flash
Xylem brand incidents occurring per day, arc
flash is a leading cause of death
and burn accidents for maintenance
staff when servicing electrical
They are not just a control panels in North America
bargain; they are a today. Onsite damages caused by
‘steel’ MJK an arc flash incident include: OSHA
citations or fines, down time, loss of
revenue and equipment damage.
In worst case scenarios, arc flash
Pumping Services, Inc. may result in long term disability or
even death thereby having a
201 Lincoln Blvd. significant impact on the liability of
the municipality. Very dangerous
Middlesex, NJ USA conditions from intense heat, toxic ZONE 2 MCC Compartment Danger
P: 732 469 4540 smoke, blinding light and risk to life Zone: Entry is limited when energized
usually occur in less than 0.2 NFPA 70 safety gear or may be
F: 732 469 5912 seconds. "Lockout/Tagout" protected for
unrestricted access.
<iframe width="420" ZONE 3 Controls Compartment
Click here for video. This test-facility
height="315" Operator Safety Zone: Contains only
footage shows an arc flash created
src="http://www.youtube.com/e low circuits (120 VAC or lower).
for mbed/xsBrQlBUo4w?rel=0"
NFPA's video “Reducing ZONE 4 Skirt Compartment Gas
Workplace Electrical Hazards”
frameborder="0" Isolation Zone: Provides gas isolation in
allowfullscreen></iframe> wastewater lift station applications.
John Corkery 732.667.1800 Wayne Laraway 732.667.1835 David J. Silverman P.E. 347.563.0766
Municipal Sales Manager
john.corkery@psiprocess.com http://www.psipr
Eastern PA New York Region
Edward Johnson 732.667.1822
Roger Parkhurst 732.667.1804 Tim Fortner 732.667.1831 Industrial Sales
Central and Southern New Jersey
ocess.com
Western New Jersey
www.psiprocess.com
Engineering assistance 732.667.1833

2. in three grades of steel to correspond with various
environments: coated carbon steel, 304 stainless
steel and 316 stainless steel.
Have it ‘made in the shade'
http://us.mjk.com/mjk‐
Effective July 13, 2012; MJK Automation A/S became product‐line/pump‐
a wholly owned subsidiary of Xylem Inc. PSI Process controllers/pump‐control‐
accessories/
and Equipment/Pumping Services, Inc. has been a
stocking distributor for MJK for over 6 years, with
many installations in our New York/New Jersey
distribution area.
MJK offers a super rugged Sun Shield/Rain Shield
PSI is an MJK authorized service center constructed of heavy gauge 316 stainless steel. It
with fully trained factory technicians mounts to walls, poles and rails, and is used with an
assortment of brackets and adaptor plates to mount
any MJK instrument, not just pump controllers, and is
MJK expertise enhances Xylem’s instrumentation large enough to accommodate many other makes of
platform with physical parameters such as level and instruments too. Keeping direct sun, rain and snow off
flow, along with energy-saving measurement and an instrument makes the instrument last much longer
control equipment where accuracy and reliability are and, in hot climates, reduces chances of overheating.
essential in applications such as water, wastewater, Using the MJK Sun Shield/Rain Shield is a good
environmental and irrigation. MJK’s strong position in investment that will pay for itself so you can have it
the New York and New Jersey Markets will ‘made in the shade'. See more details on our website
complement its business. by clicking on the picture or please contact PSI
Process and Equipment at 732 469 4540 or by e-mail
They are not just a bargain; they are a infor@psiprocess.com
‘steel’
Get ‘Da most' out of our demos
www.mjk.com www.psiprocess.com
PSI offers a variety of products for demo/trial
installation so you can see first hand how well MJK
So if you have an installation that corrodes flow products perform in your application. We coordinate
meters, why not let PSI and MJK try to find a better the demo program with your instrumentation group
solution? We have several installations in the tri-state and our knowledgeable staff will provide suggestions
area. MagFlux® Flowmeters are developed for & advice on how to install and operate the product.
measurements in all types of conductive liquids,
including measurement of flow in drinking water, Call the PSI Process and Equipment,
wastewater, sludge and process water. MJK's www.psiprocess.com
Pumping Services, Inc. team for your
MagFlux electromagnetic flow sensors are available Instrumentation needs
2
September l 2012