This document is a service manual for wheeled excavators. It contains sections on safety precautions, controls and instruments, technical specifications, and the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It includes specifications for various models ranging from the WE190 to the WE230 Industrial. The upper structure section covers components like the slewing bearing, slewing gearbox, multi-cooler, hydraulic pumps, and hydraulic oil tank.
New holland we210 industrial wheel loader service repair manualfjjsjekfkskekme
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts summarizing fuel, engine, and supply information.
New holland we230 industrial wheel loader service repair manualfdjjsekksemxs
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and more. It is intended to help technicians service and repair these excavator models.
New holland we230 wheel loader service repair manualfjjsekksemmx
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts of replacement parts.
New holland we190 wheel loader service repair manualjjfjsekksemm
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts of replacement parts.
Case cx250 d nlc (tier4 final) crawler excavator service repair manualfujsjefjsekkem
This document is a service manual for the CX250D Crawler Excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures, and unauthorized work or parts will void any warranty.
Crown sc3013 forklift parts catalogue manualfjjskekdmmse
This document is a parts manual that contains a table of contents listing parts for an SC3000 series machine. The table of contents includes over 50 part descriptions organized into 7 sections related to the power unit, hydraulic system, drive unit, electrical system, brakes, steering, and mast/lift structure. Each part listing includes the part's page number and identification number. The parts manual provides identification and organization of replacement components for the SC3000 series.
Interested in accessing China's booming construction market? If so, we can help. ICE Vibro is in the market to serve you! Serve you by offering superior quality hammers, short delivery times, and 24 hour service support.
We have offices in Shanghai, China, as well as Singapore and the Netherlands.
That attached document is a user manual to help owners of ICE products better understand their equipment.
The document discusses the internal combustion engine and pneumatic shaper machine. It provides details on the components of a pneumatic system including the pneumatic cylinder, solenoid valve, air compressor, and their functions. It then describes the different types of shaper machines based on their mechanism, ram position, table design, and cutting stroke. The working principle, construction, and operations of a typical shaper machine are explained. Key advantages include precision, reliability, and ability to produce flat surfaces. Limitations are also outlined.
New holland we210 industrial wheel loader service repair manualfjjsjekfkskekme
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts summarizing fuel, engine, and supply information.
New holland we230 industrial wheel loader service repair manualfdjjsekksemxs
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and more. It is intended to help technicians service and repair these excavator models.
New holland we230 wheel loader service repair manualfjjsekksemmx
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts of replacement parts.
New holland we190 wheel loader service repair manualjjfjsekksemm
This document is a service manual for wheeled excavators that contains specifications and repair/maintenance instructions. It includes sections on safety precautions, controls and instruments, technical specifications, and repair/maintenance of the upper structure. The technical specifications section provides details on main components, dimensions, operating weights, digging performance, lifting capacities, and systems like hydraulics, travel, and electrical. It also includes charts of replacement parts.
Case cx250 d nlc (tier4 final) crawler excavator service repair manualfujsjefjsekkem
This document is a service manual for the CX250D Crawler Excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures, and unauthorized work or parts will void any warranty.
Crown sc3013 forklift parts catalogue manualfjjskekdmmse
This document is a parts manual that contains a table of contents listing parts for an SC3000 series machine. The table of contents includes over 50 part descriptions organized into 7 sections related to the power unit, hydraulic system, drive unit, electrical system, brakes, steering, and mast/lift structure. Each part listing includes the part's page number and identification number. The parts manual provides identification and organization of replacement components for the SC3000 series.
Interested in accessing China's booming construction market? If so, we can help. ICE Vibro is in the market to serve you! Serve you by offering superior quality hammers, short delivery times, and 24 hour service support.
We have offices in Shanghai, China, as well as Singapore and the Netherlands.
That attached document is a user manual to help owners of ICE products better understand their equipment.
The document discusses the internal combustion engine and pneumatic shaper machine. It provides details on the components of a pneumatic system including the pneumatic cylinder, solenoid valve, air compressor, and their functions. It then describes the different types of shaper machines based on their mechanism, ram position, table design, and cutting stroke. The working principle, construction, and operations of a typical shaper machine are explained. Key advantages include precision, reliability, and ability to produce flat surfaces. Limitations are also outlined.
New holland w170 compact wheeled excavator service repair manualfjjskdmnenemm
This service manual provides information for servicing the WE150 Compact, WE170 Compact, and WE170C Railroad wheeled excavators. The manual covers safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for major components, hydraulic and electrical systems, fault codes, and calibration. Sections include safety instructions, technical specifications, disassembly and repair of components, troubleshooting, and calibration procedures. The manual aims to guide maintenance technicians in properly servicing and repairing these wheeled excavator models.
New holland we170 c railroad wheeled excavator service repair manualfjkskekxsdcmdmme
This service manual provides information for servicing the WE150 Compact, WE170 Compact, and WE170C Railroad wheeled excavators. The manual covers safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for major components, hydraulic and electrical systems, fault codes, and calibration. Sections include safety instructions, technical specifications, disassembly and repair of components, troubleshooting, and calibration procedures. The manual aims to guide maintenance technicians in properly servicing and repairing these wheeled excavator models.
Crown sc3013 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a SC3000 series truck. It contains sections covering safety, introduction/overview, lubrication and adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The document includes descriptions of components, operational details, maintenance schedules, repair instructions, and wiring diagrams.
Crown sc3018 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a series of trucks. It contains sections on safety, introduction/use of the manual, lubrication/adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The manual describes the various systems, components, maintenance schedules, and repair procedures.
Crown sc3016 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a series of trucks. It contains sections on safety, introduction/use of the manual, lubrication/adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The manual describes the various systems, components, maintenance schedules, and repair procedures.
Claas lexion 410 405 combine (type 452) service repair manualfjseoldkekm
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualhfhjskedme
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 410 405 combine (type 452) service repair manualfjskekfksmem
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 450 cat na combine (type 553) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 410 405 combine (type 452) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 450 cat na combine (type 553) service repair manualhfhjskedme
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualfjskekfksmem
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
New holland w170 compact wheeled excavator service repair manualfjjskdmnenemm
This service manual provides information for servicing the WE150 Compact, WE170 Compact, and WE170C Railroad wheeled excavators. The manual covers safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for major components, hydraulic and electrical systems, fault codes, and calibration. Sections include safety instructions, technical specifications, disassembly and repair of components, troubleshooting, and calibration procedures. The manual aims to guide maintenance technicians in properly servicing and repairing these wheeled excavator models.
New holland we170 c railroad wheeled excavator service repair manualfjkskekxsdcmdmme
This service manual provides information for servicing the WE150 Compact, WE170 Compact, and WE170C Railroad wheeled excavators. The manual covers safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for major components, hydraulic and electrical systems, fault codes, and calibration. Sections include safety instructions, technical specifications, disassembly and repair of components, troubleshooting, and calibration procedures. The manual aims to guide maintenance technicians in properly servicing and repairing these wheeled excavator models.
Crown sc3013 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a SC3000 series truck. It contains sections covering safety, introduction/overview, lubrication and adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The document includes descriptions of components, operational details, maintenance schedules, repair instructions, and wiring diagrams.
Crown sc3018 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a series of trucks. It contains sections on safety, introduction/use of the manual, lubrication/adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The manual describes the various systems, components, maintenance schedules, and repair procedures.
Crown sc3016 forklift service repair manualfhhsjdkmem
This document provides maintenance and repair information for a series of trucks. It contains sections on safety, introduction/use of the manual, lubrication/adjustment, hydraulics, drive unit, electrics, brakes, and batteries. The manual describes the various systems, components, maintenance schedules, and repair procedures.
Claas lexion 410 405 combine (type 452) service repair manualfjseoldkekm
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualhfhjskedme
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 410 405 combine (type 452) service repair manualfjskekfksmem
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 450 cat na combine (type 553) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 410 405 combine (type 452) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 450 cat na combine (type 553) service repair manualhfhjskedme
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualfjskekfksmem
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Similar to New holland we190 wheel loader service repair manual (20)
John deere 230 cs chainsaws service repair manualfhsjejkdm
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by system.
John deere 200 cs chainsaws service repair manualfhsjejkdm
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by system.
John deere 200 sprayer attachment service repair manualfhsjejkdm
This technical manual provides specifications and information for servicing a John Deere 200 Sprayer Attachment. It includes sections on general specifications for the vehicle and sprayer components, repair information such as torque values, lubricant specifications, and locations for identification numbers. It also describes operational checkout procedures to test the sprayer system.
John deere 113 172 clipper service repair manualfhsjejkdm
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, including engine details, fuel and oil requirements, ignition components, and dimensions for the different models. Safety guidelines are also outlined for operating the equipment safely.
John deere 110 g, 210g, 240g 260g trimmer clutters service repair manualfhsjejkdm
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreach and kickback, and not modify machines without authorization.
John deere 54 inch commercial walk behind mower service repair manualfhsjejkdm
This technical manual provides service information for John Deere 38, 48, and 54-inch commercial walk-behind mowers. It contains specifications, repair and diagnostic procedures, and safety information. The manual is intended for experienced technicians and covers engine, fuel, electrical, power train, steering, brake, and mower deck systems. Safety messages in the introduction emphasize the importance of following proper safety precautions when working on equipment.
John deere 51 & 246 rotary brooms service repair manualfhsjejkdm
This technical manual provides specifications and lubrication information for John Deere lawn and grounds care equipment. It includes torque values, recommended gear case oils and greases, transmission oils, and specifications for rotary mowers and snowblowers. The manual aims to ensure technicians have the correct information to service equipment properly and safely.
John deere 48, 450, 550 & 660 rotary tillers service repair manualfhsjejkdm
This technical manual provides specifications and lubrication information for John Deere lawn and grounds care equipment. It includes torque values, recommended gear case oils and greases, transmission fluids, and specifications for rotary mowers, snowblowers, and other attachments. The manual is intended to assist experienced technicians in servicing this equipment.
John deere 48, 50, 54, 60, 72, 76, 160, 172, 261 & 272 rotary mowers serv...fhsjejkdm
This technical manual provides specifications and lubrication information for John Deere lawn and grounds care equipment. It includes torque values, recommended gear case oils and greases, transmission fluids, and specifications for rotary mowers, snowblowers, and other attachments. The manual is intended to assist experienced technicians in servicing this equipment.
John deere 48 inch commercial walk behind mower service repair manualfhsjejkdm
This technical manual provides service information for John Deere 38, 48, and 54-inch commercial walk-behind mowers. It contains specifications, repair and diagnostic procedures, and operational testing for the engine, fuel system, electrical system, power train, steering, brakes, mower deck, and other components. Safety messages are presented throughout and fastener torque specifications are provided. The manual is intended for experienced technicians and is part of John Deere's total product support program.
John deere 47, 59 & 359 snowblowers service repair manualfhsjejkdm
This technical manual provides specifications and lubrication information for John Deere lawn and grounds care equipment. It includes torque values, recommended gear case oils and greases, transmission fluids, and specifications for rotary mowers, snowblowers, and other attachments. The manual is intended to assist experienced technicians in servicing this equipment.
John deere 46, 49 & 50 snowthrowers service repair manualfhsjejkdm
This technical manual provides information for experienced technicians on inspecting, disassembling, and assembling various John Deere lawn and grounds care equipment including rotary mowers, snowblowers, snowthrowers, post hole diggers, rotary tillers, and rotary brooms with either 2000 or 540 RPM PTO. The manual is organized by equipment type and covers sections like safety procedures, fluid handling, battery handling, and service procedures.
Clark gph 50 forklift service repair manualfhsjejkdm
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for issues like leaks, loose fasteners, and worn/damaged components.
2. Using a planned maintenance report form to document inspections and any needed repairs.
3. Testing functions like the starting system, gauges, controls, brakes and steering to ensure proper operation.
4. Inspecting and lubricating specific components, like the engine, hydraulic and electrical systems, wheels/
Clark gp127 e forklift service repair manualfhsjejkdm
This document provides instructions and safety guidelines for Clark lift truck maintenance personnel. It discusses safety signs and messages, safe maintenance practices, and general shop precautions. Specific safety practices include properly jacking, blocking and lifting trucks, following electrical safety procedures, and ensuring only trained personnel conduct maintenance.
Clark gp127 forklift service repair manualfhsjejkdm
This document provides instructions and safety precautions for Clark industrial lift truck maintenance personnel. It outlines recommended safe maintenance practices including properly jacking, blocking and towing trucks. The document instructs technicians to only perform maintenance if trained and authorized, using manufacturer procedures and recommendations. Technicians are advised to take safety precautions such as wearing protective equipment, disconnecting power sources, and avoiding fire hazards.
Clark gex20 30 forklift service repair manualfhsjejkdm
The document provides instructions and safety information for maintaining industrial trucks. It discusses identifying and understanding safety signs, recommended safe maintenance practices, and general shop safety precautions. The safe maintenance practices section lists 20 points covering proper maintenance procedures, qualifications of maintenance personnel, personal protective equipment, safety checks, fuel and electrical system handling, inspection of truck components, and using proper replacement parts.
Clark gcs standard forklift service repair manualfhsjejkdm
- This document is a service manual intended for CLARK dealers providing maintenance and repair information for CLARK lift trucks.
- It contains general safety practices and precautions for working on lift trucks, identifying important safety signs and messages, and provides model identification information.
- Technicians are instructed to read all safety information and follow proper procedures to prevent injuries when servicing lift trucks.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
6. INDEX
11. HYDRAULIC SYSTEM OF BUCKET...................................................................................................... 111
12. HYDRAULIC SYSTEM OF DIPPER....................................................................................................... 116
13. HYDRAULIC SYSTEM OF 2-PIECE BOOM .......................................................................................... 120
14. HYDRAULIC SYSTEM WITH COMBINATION OF DIFFERENT FUNCTIONS (BOOM, 2-PIECE BOOM,
DIPPER AND BUCKET) ......................................................................................................................... 126
15. HYDRAULIC SYSTEM OF HAMMER (WITH 2-PIECE BOOM)............................................................. 128
16. HYDRAULIC SYSTEM OF HAMMER AND SHEARS (WITH 2-PIECE BOOM) .................................... 131
17. HYDRAULIC SYSTEM OF SHEARS (WITH 2-PIECE BOOM).............................................................. 136
18. HYDRAULIC SYSTEM OF HAMMER (WITH MONOBOOM)................................................................. 139
19. HYDRAULIC SYSTEM OF HAMMER AND SHEARS (WITH MONOBOOM) ........................................ 142
20. HYDRAULIC SYSTEM OF SHEARS (WITH MONOBOOM).................................................................. 147
21. TROUBLESHOOTING............................................................................................................................ 150
SECTION 10 - ELECTRICAL SYSTEM
1. ELECTRICAL DIAGRAMS ......................................................................................................................... 1
1.1 ELECTRICAL DIAGRAMS (WE190 - WE210 - WE230) .................................................................... 1
1.2 ELECTRICAL DIAGRAMS (WE210 Industrial - WE230 Industrial).................................................. 39
2. FUSES...................................................................................................................................................... 77
2.1 FUSES - REPLACEMENT................................................................................................................ 79
2.2 BATTERIES - REPLACEMENT........................................................................................................ 80
2.3 CLAMPS CHECK ............................................................................................................................. 81
2.4 CHARGE .......................................................................................................................................... 81
3. BULBS ...................................................................................................................................................... 82
3.1 CAB LIGHT....................................................................................................................................... 82
3.2 FRONT WORK LIGHTS ................................................................................................................... 82
3.3 BOOM WORK LIGHT....................................................................................................................... 83
3.4 TRAVEL LIGHT ................................................................................................................................ 83
3.5 TURN SIGNAL LIGHTS.................................................................................................................... 84
3.6 REAR FLOODLAMPS ...................................................................................................................... 84
4. TROUBLESHOOTING.............................................................................................................................. 85
SECTION 11 - ELECTRONICS
1. MAIN COMPONENTS ................................................................................................................................ 1
2. COMPONENTS OF LINE 1 ........................................................................................................................ 3
2.1 MULTI-FUNCTION DISPLAY............................................................................................................. 3
2.2 CENTRAL UNIT.................................................................................................................................. 3
2.3 KEY-PAD MODULES ......................................................................................................................... 6
2.4 POWER CONTROL SYSTEM............................................................................................................ 7
2.5 DIAGNOSTICS SOCKET ................................................................................................................... 9
2.6 ELECTRO-HYDRAULIC CONTROLLER ........................................................................................... 9
3. COMPONENTS OF LINE CAN 2.............................................................................................................. 13
3.1 OPERATION..................................................................................................................................... 13
3.2 CENTRAL UNIT................................................................................................................................ 14
3.3 HYDRAULIC CONTROL LEVERS ................................................................................................... 14
3.4 TRAVEL PEDAL............................................................................................................................... 19
3.5 ATTACHMENT PEDAL (FOR HAMMER AND ADJUSTING CYLINDER)
(WE190 - WE210 - WE230, no Industrial models) ........................................................................... 20
3.6 POWER CONTROL SYSTEM.......................................................................................................... 21
7. INDEX
4. ENGINE SPEED ACTUATOR .................................................................................................................. 28
4.1 ENGINE SPEED SENSING.............................................................................................................. 28
5. COOLANT TEMPERATURE DETECTION............................................................................................... 29
6. CHARGE AIR TEMPERATURE DETECTION.......................................................................................... 30
7. HYDRAULIC OIL TEMPERATURE DETECTION..................................................................................... 31
8. PROPORTIONAL VALVE - FAN MOTOR ................................................................................................ 32
9. PROPORTIONAL VALVES - CONTROL BLOCK..................................................................................... 33
10. PILOT CONTROL BLOCK........................................................................................................................ 34
SECTION 12 - CALIBRATION
1. NECESSARY OPERATIONS BEFORE CALIBRATION............................................................................. 1
1.1 CALIBRATION OF THE MAIN PUMP ................................................................................................ 1
1.2 CALIBRATION OF THE ROTATION PUMP....................................................................................... 2
2. DISPLAY: CALIBRATION MENU ............................................................................................................... 3
3. CALIBRATIONS WITH THE ENGINE RUNNING....................................................................................... 4
3.1 VDO CALIBRATION ........................................................................................................................... 6
3.2 POWER CALIBRATION ..................................................................................................................... 7
3.3 MAIN VALVE CALIBRATION (CONTROL VALVE)............................................................................ 8
3.4 TRAVEL CALIBRATION................................................................................................................... 11
3.5 PUMP DELIVERY CALIBRATION.................................................................................................... 13
3.6 SLEWING PUMP CALIBRATION..................................................................................................... 16
3.7 AUXILIARY PRESSURE CALIBRATION ......................................................................................... 18
4. CALIBRATIONS WITH THE ENGINE STOPPED .................................................................................... 20
4.1 CALIBRATIONS, ALL SOLENOID VALVES, MAIN PUMP, ROTATION PUMP,
AUXILIARY PRESSURE .................................................................................................................. 22
4.2 MAIN VALVE CALIBRATION (CONTROL VALVE).......................................................................... 24
SECTION 13 - FAULT CODES
1. ERROR INDICATION ON THE DISPLAY................................................................................................... 1
2. CENTRAL UNIT AND ENGINE................................................................................................................... 3
2.1 FAULT CODES................................................................................................................................... 3
3. PCS UNIT (POWER CONTROL SYSTEM)................................................................................................ 5
3.1 FAULT CODES................................................................................................................................... 5
4. HYDRAULICS............................................................................................................................................. 6
4.1 SAFETY-RELATED SYSTEM DIAGNOSTIC FAULTS ...................................................................... 6
4.2 COMMON FAULTS ............................................................................................................................ 7
4.3 CAN INTERFACE............................................................................................................................. 10
4.4 DISPLAY INDICATORS.................................................................................................................... 11
4.5 KEY PADS........................................................................................................................................ 11
4.6 COMMON DIGITAL INPUTS............................................................................................................ 12
4.7 HYDRAULIC CONTROL LEVER / PEDALS..................................................................................... 13
4.8 PILOT PRESSURE SUPPLY............................................................................................................ 18
4.9 MAIN PUMPS ................................................................................................................................... 20
4.10 ATTACHMENT SENSORS............................................................................................................... 21
4.11 SLEWING SYSTEM.......................................................................................................................... 22
4.12 PILOT VALVES ON MAIN VALVE.................................................................................................... 24
4.13 ADDITIONAL VALVES AND SENSORS .......................................................................................... 28
4.14 AUTOMATIC CALIBRATION FAULTS............................................................................................. 29
8. 1. INTRODUCTION .......................................................................................................................................... 2
1.1 DESIGNATED USE ............................................................................................................................... 2
2. GENERAL SAFETY INSTRUCTIONS.......................................................................................................... 3
3. USE INSTRUCTION ................................................................................................................................... 12
3.1 LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR....................................................... 13
3.2 NOISE LEVELS ................................................................................................................................... 14
3.3 TRAVELLING ON PUBLIC ROADS .................................................................................................... 15
SECTION 01 - SAFETY PRECAUTIONS
9. SECTION 01 - SAFETY PRECAUTIONS 1
Carefully read the safety rules contained herein and
follow advised precautions to avoid potential haz-
ards and to safeguard your safety and personal in-
tegrity.
In this manual you will find the following indications:
S DANGER
With specific warnings about potential dangers for
the operator’s or other persons integrity directly or
indirectly involved.
S WARNING
This symbol warns about the possibility of potential
damages to the machine that can involve the
operator’s safety.
The non compliance with the warning preceded by
the above mentioned key-words (DANGER and
WARNING) can cause serious accidents or even the
death of the persons involved.
Moreover, this Manual contains some instructions
with texts in italics, preceded by the words NOTE
and CAUTION, with following meanings for machine
protection:
NOTE: it emphasizes and underlines to the operator
the correct technique or correct procedure to follow.
S WARNING
It warns the operator of a possible hazard of machine
damage in case he does not follow a determined
procedure.
Your safety and that of people around you depends
on you. It is essential that you understand this man-
ual for the correct operation, inspection, lubrication
and maintenance of this machine.
10. 2 SECTION 01 - SAFETY PRECAUTIONS
1. INTRODUCTION
The wheeled excavators WE190 - WE210 - WE210
Industrial - WE230 - WE230 Industrial are operation
hydraulic machines.
They essentially consist in a wheeled undercarriage
on which a slewing bearing is mounted, which is cou-
pled to the upper frame.
The upper frame supports the front attachment, the
engine, the hydraulic components, the cab, the fuel
tank and the counterweight.
When the operator activates the controls (hydraulic
control levers and pedals), the hydraulic pumps rotat-
ed by the engine suck oil from the tank and convey it
to the control valve; the control valve, in turn, sends
it to the relevant users.
A cooling system keeps the hydraulic fluid at a nor-
mal operating temperature.
1.1 DESIGNATED USE
The machine has been built in accordance with state-
of-the-art standards and the recognized safety rules.
The machine must be used in accordance with its
designated use, by observing the safety and precau-
tionary rules and by strictly following the operating in-
structions. Any functional disorders, especially those
affecting the safety of the machine, should therefore
be rectified immediately.
WE190 - WE210 - WE230: the Excavator is intend-
ed to be used in digging and loading operation (with
bucket or grab or clamshell bucket), ground levelling
(with blade when installed) and use of hydraulic
hammer to break concrete or other solid material.
WE210 Industrial - WE230 Industrial: the Excavator
is intended to be used in loading / moving operation
(with grab or clamshell) or lift / moving operation
with magnet.
The manufacturer/supplier cannot be held responsi-
ble for any damage resulting from other than the
designated use. The risk involved in such misuse
lies entirely with the user.
Instructions concerning safety, operation and main-
tenance have been developed to permit safe serv-
ice and operation of this machine.
WE190 - WE210 - WE230
WE210 Industrial - WE230 Industrial
S DANGER S
A different use of the excavator or of its working
equipment:
- for lifting or transporting persons;
- as a working platform;
- for lifting loads without the attachment being
approved for this purpose;
- for pulling slung loads;
- for driving in posts, supports, sheet-piles, without
the attachment being approved for this purpose;
is considered contrary to the designated use.
Improper use may cause injury or life-threatening
risks for the operator and for other persons.
S DANGER S
For clarity purposes, some figures in this Manual
show the machine with protection panels or covers
removed. Never operate the machine with any pro-
tection panels or covers removed.
S DANGER S
It is absolutely forbidden to tamper and/or change
the setting of any of the hydraulic system valves to
avoid damaging machine components with conse-
quent risks to personal safety.
11. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
12. SECTION 01 - SAFETY PRECAUTIONS 3
2. GENERAL SAFETY INSTRUCTIONS
Carefully read this Manual before proceeding with
maintenance, repairs, refuelling or other machine
operations.
Repairs have to be carried out only by authorized
and instructed staff; specific precautions have to be
taken when grinding, welding or when using mallets
or heavy hammers.
Not authorized persons are not allowed to repair or
carry out maintenance on this machine. Do not carry
out any work on the equipment without prior authori-
zation.
Ask your employer about the safety instructions in
force and safety equipment.
Nobody is allowed to seat on the operator’s place
during machine maintenance unless he is a qualified
operator helping with the maintenance work.
If it is necessary to move the equipment to carry out
repairs or maintenance, do not lift or lower the equip-
ment from any other position than the operator’s
seat.
Never carry out any operation on the machine when
the engine is running, except when specifically indi-
cated.
Stop the engine and ensure that all pressure is re-
lieved from hydraulic circuits before removing caps,
covers, valves, etc.
All repair and maintenance operations should be
carried out with the greatest care and attention.
Service stairs and platforms used in a workshop or
in the field should be built in compliance with the
safety rules in force.
Any functional disorders, especially those affecting
the safety of the machine, should therefore be recti-
fied immediately.
13. 4 SECTION 01 - SAFETY PRECAUTIONS
2.1 EMERGENCY
Be prepared for emergencies. Always keep at dis-
posal on the machine a first aid kit and a fire extin-
guisher. Make sure that the fire extinguisher is
serviced in accordance with the manufacturer’s in-
structions.
2.2 EQUIPMENT
Wear close fitting clothing and safety equipment ap-
propriate for the job:
Z safety helmet;
Z safety shoes;
Z heavy gloves;
Z reflective clothing;
Z wet weather clothing.
If environment condition require it following personal
safety equipment should be at hand:
Z respirators (or dustproof masks);
Z ear plugs or acoustic ears protections;
Z goggles with lateral shield or masks for eyes pro-
tection.
Do not wear rings, wristwatches, jewels, unbuttoned
or flapping clothing such as ties, torn clothes,
scarves, open jackets or shirts with open zips which
could get caught into moving parts.
14. SECTION 01 - SAFETY PRECAUTIONS 5
2.3 ENGINE - RADIATOR
Never leave the engine run in closed spaces without
ventilation and not able to evacuate toxic exhaust
gases. Keep the exhaust manifold and tube free
from combustion materials.
Do not refuel with the engine running, especially if
hot, as this increases fire hazard in case of fuel spill-
age.
Never attempt to check or adjust the fan belts when
the engine is running.
Never lubricate the machine with the engine run-
ning.
Pay attention to rotary pieces and do not allow to an-
yone to approach to avoid becoming entangled.
If hands, clothes or tools get caught in the fan blades
or in the transmission belt, this can cause amputa-
tions, violent tears and generate condition of serious
danger; for this reason avoid touching or to come
close to all rotary or moving parts.
A violent jet of the coolant from the radiator can
cause damages and scalds.
If you are to check the coolant level, you have to shut
off the engine previously and to let cool down the ra-
diator and its pipes. Slowly unscrew the cap to re-
lease the inside pressure.
If necessary, remove the cap with hot engine, wear
safety clothes and equipment, then loosen the cap
slowly to relieve the pressure gradually.
When checking the fuel, oil and coolant levels, use
exclusively explosion proof classified lamps. If this
kind of lamps are not used fires or explosions may
occur.
15. 6 SECTION 01 - SAFETY PRECAUTIONS
2.4 HYDRAULIC SYSTEMS
Splashes of fluids under pressure can penetrate the
skin causing serious injuries.
Avoid this hazard by relieving pressure before dis-
connecting hydraulic or other lines.
Relieve the residual pressure by moving the hydrau-
lic control levers several times.
Tighten all connections before applying pressure.
To protect the eyes wear a facial shield or safety
goggles.
Protect your hands and body from possible splashes
of fluids under pressure.
Swallowing hydraulic oil is a severe health hazard.
When hydraulic oil has been swallowed, avoid vom-
iting, but consult a doctor or go to a hospital.
If an accident occurs, see a doctor familiar with this
type of injury immediately.
Any fluid penetrating the skin must be removed with-
in few hours to avoid serious infections.
Flammable splashes may originate because of the
heat near pipes with fluids under pressure, with the
result of serious scalds for the persons hit. Do not
weld or use torches near pipes containing fluids or
other flammable materials.
Pipes under pressure can accidentally be pierced
when the heat expands beyond the area immediate-
ly heated.
Arrange for fire resistant temporary shields to pro-
tect hoses or other components during welding.
Have any visible leakage repaired immediately.
Escaping oil pollutes the environment. Soak up any
oil that has escaped with a proper binding agent.
Sweep up binding agent and dispose of it separately
from other waste.
Never search for leakages with the fingers, but use a
piece of cardboard and always wear goggles.
Never repair damaged piping; always replace it. Re-
place hydraulic hoses immediately on detecting any
damage or moist areas.
Always store hydraulic oil in the original containers.
16. SECTION 01 - SAFETY PRECAUTIONS 7
HOSES AND TUBES
Always replace hoses and tubes if the cone end or
the end connections on the hose are damaged.
When installing a new hose, loosely connect each
end and make sure the hose takes up the correct po-
sition before tightening the connections. Clamps
should be tightened sufficiently to hold the hose with-
out crushing and to prevent chafing.
After hose replacement to a moving component,
check that the hose does not foul by moving the
component through the complete range of travel.
Be sure any hose which has been installed is not
kinked or twisted.
Hose connections which are damaged, dented,
crushed or leaking, restrict oil flow and the productiv-
ity of the components being served. Connectors
which show signs of movement from the original po-
sition have failed and will ultimately separate com-
pletely.
A hose with a frayed outer sheath will allow the water
penetration. Concealed corrosion of the wire rein-
forcement will subsequently occur along the hose
length with resultant hose failure.
Ballooning of the hose indicates an internal leakage
due to structural failure. This condition rapidly deteri-
orates and total hose failure soon occurs.
Kinked, crushed, stretched or deformed hoses gen-
erally suffer internal structural damage which can re-
sult in oil restriction, a reduction in the speed of
operation and ultimate hose failure.
Free-moving, unsupported hoses must never be al-
lowed to touch each other or related working surfac-
es. This causes chafing which reduces hose life.
O-RINGS
Replace O-rings, seal rings and gaskets whenever
they are disassembled.
Never mix new and old seals or O-rings, regardless
of condition. Always lubricate new seal rings and O-
rings with hydraulic oil before installation to relevant
seats.
This will prevent the O-rings from rolling over and
twisting during mounting which will jeopardize seal-
ing.
17. 8 SECTION 01 - SAFETY PRECAUTIONS
2.5 BATTERY
Batteries give off explosive gases.
Never handle naked flames and unshielded light
sources near batteries, never smoke.
To prevent any risk of explosion, observe the follow-
ing instructions:
Z when disconnecting the battery cables, always dis-
connect the negative (-) cable first;
Z to reconnect the battery cables, always connect the
negative (-) cable last;
Z never short-circuit the battery terminals with metal
objects;
Z do not weld, grind or smoke near a battery.
Battery electrolyte causes severe burns. The bat-
tery contains sulphuric acid. Avoid any contact with
the skin, eyes or clothing.
Antidote:
Z EXTERNAL: rinse well with water, removing any
soiled clothing.
Z INTERNAL: avoid vomiting. Drink water to rinse
your mouth. Consult a doctor.
Z EYES: rinse abundantly with water for 15 minutes
and consult a doctor.
Z When the electrolyte of a battery is frozen, it can
explode if you attempt to charge the battery or if
you try to start the engine using a booster battery.
Always keep the battery charged to prevent the
electrolyte freezing.
Provide good ventilation when changing a battery or
using a battery in an enclosed space. Always protect
your eyes when working near a battery.
Never set tools down on the battery. They may in-
duce a short circuit, causing irreparable damage to
the battery and injuring persons.
Never wear metal necklaces, bracelets or watch-
straps when working on the battery. The metal parts
may induce a short circuit resulting in burns.
Dispose of used batteries separately from other
waste in the interests of environmental protection.