The document is a service manual that provides an overview of the primary hydraulic power system for TC5000 combines. It includes technical specifications for the hydraulic pumps, diagrams showing the layout of hydraulic components, and identification of key parts such as the main hydraulic pump, steering pump, oil tank, filters, and valves that control functions like header height and unloading.
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
New Holland W70BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W60BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W50BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It contains instructions for repair procedures, necessary tools, and specifications. The complete manual consists of two volumes, one covering the wheel loaders and one covering the engine. It lists contact information for questions and identifies print numbers to reference the correct volumes. Safety instructions are provided to prevent accidents during maintenance.
New Holland VN2080 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document contains specifications for a self-propelled grape harvester model VN 2080, including two variants. It includes dimensions, weights, engine specifications, hydraulic and steering systems, braking capabilities, and allowable slopes for operation with or without a destemmer installed. Key details are the machine's 129 kW diesel engine, maximum transport speed of 25 km/h, operating speed of 14 km/h, and ability to operate on slopes up to 20% without a destemmer or 10-19% with a destemmer installed, depending on the vineyard row spacing.
New Holland VN260 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed. The manual provides detailed technical specifications and diagrams of the hydraulic system components and their interactions to enable service and maintenance.
New Holland VN240 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed operation. The manual provides detailed technical specifications and diagrams for maintenance and repair of the hydraulic and drive components.
New Holland TV6070 Tractor Service Repair Manual Instant Download.pdftaishang3939
This document provides a table of contents for a tractor repair manual. It lists sections covering general information, the fuel system, air induction system, exhaust system, cooling systems, engine testing, transmissions, drivelines, hydrostatic drive components, auxiliary pump drive, splitter box removal and disassembly, engine end axle, cab end axle, cab end PTO, engine end PTO, brakes, and hydraulics and steering. Each section provides specifications, descriptions, troubleshooting, testing procedures, and instructions for removal and repair of components.
New Holland TN75 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN70 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN65 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TN55 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized service technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
The document is a service manual that provides an overview of the primary hydraulic power system for TC5000 combines. It includes technical specifications for the hydraulic pumps, diagrams showing the layout of hydraulic components, and identification of key parts such as the main hydraulic pump, steering pump, oil tank, filters, and valves that control functions like header height and unloading.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulic systems, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for various functions.
4. The document provides diagrams of the air compressor and pressure relief valve along with instructions for removing the air
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance should only be performed by trained technicians using the proper tools and procedures outlined in the manual. Unauthorized repairs may void warranties.
New Holland TC5070 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
Caterpillar Cat TH460B Telehandler (Prefix SLF) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing various engine components on a Caterpillar 3054E engine, including the cylinder head, rocker shaft, lifters, and camshaft. The procedures describe cleaning parts, lubricating bolts, and torquing fasteners to the specified values. Special tools may be required and safety precautions are noted regarding containing fluids.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
New Holland W70BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W60BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W50BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It contains instructions for repair procedures, necessary tools, and specifications. The complete manual consists of two volumes, one covering the wheel loaders and one covering the engine. It lists contact information for questions and identifies print numbers to reference the correct volumes. Safety instructions are provided to prevent accidents during maintenance.
New Holland VN2080 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document contains specifications for a self-propelled grape harvester model VN 2080, including two variants. It includes dimensions, weights, engine specifications, hydraulic and steering systems, braking capabilities, and allowable slopes for operation with or without a destemmer installed. Key details are the machine's 129 kW diesel engine, maximum transport speed of 25 km/h, operating speed of 14 km/h, and ability to operate on slopes up to 20% without a destemmer or 10-19% with a destemmer installed, depending on the vineyard row spacing.
New Holland VN260 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed. The manual provides detailed technical specifications and diagrams of the hydraulic system components and their interactions to enable service and maintenance.
New Holland VN240 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed operation. The manual provides detailed technical specifications and diagrams for maintenance and repair of the hydraulic and drive components.
New Holland TV6070 Tractor Service Repair Manual Instant Download.pdftaishang3939
This document provides a table of contents for a tractor repair manual. It lists sections covering general information, the fuel system, air induction system, exhaust system, cooling systems, engine testing, transmissions, drivelines, hydrostatic drive components, auxiliary pump drive, splitter box removal and disassembly, engine end axle, cab end axle, cab end PTO, engine end PTO, brakes, and hydraulics and steering. Each section provides specifications, descriptions, troubleshooting, testing procedures, and instructions for removal and repair of components.
New Holland TN75 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN70 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN65 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TN55 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized service technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
The document is a service manual that provides an overview of the primary hydraulic power system for TC5000 combines. It includes technical specifications for the hydraulic pumps, diagrams showing the layout of hydraulic components, and identification of key parts such as the main hydraulic pump, steering pump, oil tank, filters, and valves that control functions like header height and unloading.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulic systems, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for various functions.
4. The document provides diagrams of the air compressor and pressure relief valve along with instructions for removing the air
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance should only be performed by trained technicians using the proper tools and procedures outlined in the manual. Unauthorized repairs may void warranties.
New Holland TC5070 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
Caterpillar Cat TH460B Telehandler (Prefix SLF) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing various engine components on a Caterpillar 3054E engine, including the cylinder head, rocker shaft, lifters, and camshaft. The procedures describe cleaning parts, lubricating bolts, and torquing fasteners to the specified values. Special tools may be required and safety precautions are noted regarding containing fluids.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. INTRODUCTION
Foreword
TC5000
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
87734472B 05/05/2009
3
7. INTRODUCTION
Foreword
TC5000
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through CD-ROM and in paper manuals. A coding system called ICE has been
developed to link the technical information to other Product Support functions e.g. Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customers
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to the
technical information in this manual to resolve that customers concern, you will find all the information classified using
the new ICE coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating this new ICE coding into technical information , you will be able to search and retrieve just the right
piece of technical information you need to resolve that customers concern on his machine. This is made possible by
attaching 3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to
describe e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model that the piece of technical information is written for.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customers concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
87734472B 05/05/2009
4
8. INTRODUCTION
How to Use this Manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by
a letter A, B, C etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
SECTION
A - Distribution Systems
B - Power Production
C - Power Train
D - Travelling
E - Body and Structure
F - Frame Positioning
G - Tool Positioning
H - Working Arm
J - Tools and Couplers
K - Crop Processing
L - Field Processing
PRODUCT
Tractors X X X X X X X X
Vehicles with working arms: backhoes,
excavators, skid steers, .....
X X X X X X X X X
Combines, forage harvesters, balers, .... X X X X X X X X X X
Seeding, planting, floating, spraying
equipment, ....
X X X X X X X X X
Mounted equipment and tools, ..... X X X X
87734472B 05/05/2009
5
9. INTRODUCTION
This manual contains these Sections. The contents of each Section are explained over the following pages.
Contents
INTRODUCTION
DISTRIBUTION SYSTEMS A
POWER PRODUCTION B
POWER TRAIN C
TRAVELLING D
BODY AND STRUCTURE E
TOOL POSITIONING G
CROP PROCESSING K
Section Contents
SECTION A, DISTRIBUTION SYSTEMS
This Section covers the main systems that interact with most of the functions of the product. It includes the central
parts of the hydraulic, electrical, electronic, pneumatic, lighting and grease lubrication systems. The components that
are dedicated to a specific function are listed in the Chapter where all the technical information for that function is
included.
SECTION B, POWER PRODUCTION
This Section covers all the functions related to the production of power to move the machine and to drive various
devices.
SECTION C, POWER TRAIN
This Section covers all the functions related to the transmission of power from the engine to the axles and to internal
or external devices and additional Process Drive functions.
SECTION D, TRAVELLING
This Section covers all the functions related to moving the machine, including tracks, wheels, steering and braking. It
covers all the axles both driven axles and non-driven axles, including any axle suspension.
SECTION E, BODY AND STRUCTURE
This Section covers all the main functions and systems related to the structure and body of the machine. Including
the frame, the shields, the operator’s cab and the platform.
SECTION G, TOOL POSITIONING
This Section covers all the functions related to the final and/or automatic positioning of the tool once the tool is posi-
tioned using the Working Arm or the machine frame.
SECTION K, CROP PROCESSING
This Section covers all the functions related to crop processing.
87734472B 05/05/2009
6
11. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Torque
TC5000
Union nuts
55009 1
Ferrules
The ferrule must be pre-assembled on the tube. Tighten the union nut as specified in the table below. The ferrule and
screw thread are greased.
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0.32) 15 (11) 20 (15)
10 (0.4) 25 (18) 30 (22)
12 (0.47) 35 (26) 40 (29)
16 (0.63) 50 (37) 55 (40)
18 (0.71) 60 (44) 70 (51)
22 (0.87) 100 (74) 110 (81)
28 (1.10) 110 (81) 120 (88)
Metric fittings
Unions
Are suitable for use with union nuts and ferrules and ball-type nipples.
55011 2
87734472B 05/05/2009
A.10.A / 4
12. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Connections
Are screwed in ISO metric thread - tolerance class 6H - with a tightening torque as specified in the table below.
55012 3
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0,32) 40 (29) 45 (33)
10 (0,40) 65 (48) 70 (51)
12 (0,47) 80 (59) 85 (63)
16 (0,63) 100 (74) 120 (88)
18 (0,71) 120 (88) 140 (103)
22 (0,87) 200 (147) 220 (164)
28 (1,10) 350 (257) 380 (280)
Swivel nut with ball-type nipple
Are suitable for use with female unions
55013 4
D1 Torque Nm (lb.ft)
6H Minimum Maximum
M14 x 1.5 - -
M16 x 1.5 15 (11) 20 (15)
M18 x 1.5 20 (15) 25 (18)
M24 x 1.5 30 (22) 35 (26)
M26 x 1.5 - -
M30 x 2 - -
M36 x 2 - -
87734472B 05/05/2009
A.10.A / 5
13. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - General specification
TC5000
The hydraulic system is equipped with two pumps for
models without lateral flotation, and with three pumps for
models with lateral flotation.
RNIL08TC0014F0C 1
Main hydraulic pump (2)
Type Silence gear type
Direction of rotation Right -hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 16 cc/rev.
Maximum oil flow 48 l/min ( 10.5 gal/min)
Hydraulic pump (steering circuit) (3)
Type Silence gear type
Direction of rotation Right-hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 5.5 cc/rev.
Maximum oil flow 16.5 l/min ( 3.6 gal/min)
Hydraulic pump (lateral flotation circuit) (4)
Type: Gear type
Direction of rotation Right-hand rotation
Maximum pressure 230 bar ( 3336 psi)
Maximum speed 3000 rpm
Output per revolution 2 cc/rev.
Maximum oil flow 6 l/min ( 1.3 gal/min)
87734472B 05/05/2009
A.10.A / 6
14. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Overview
TC5000
RNIL08TC004G0B 1
87734472B 05/05/2009
A.10.A / 16
15. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
RNIL08TC003G0B 2
87734472B 05/05/2009
A.10.A / 17
16. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Component localisation
TC5000
NOTE: To find the location of those components, refer to PRIMARY HYDRAULIC POWER SYSTEM - Overview
(A.10.A).
For units without lateral flotation:
Main hydraulic pump (2), steering circuit pump (3).
ZEIL08TC0006A0B 1
For units with lateral flotation (optional):
Main hydraulic pump (2), steering circuit pump (3), lateral
flotation pump (4).
ZEIL08TC0033A0C 2
Oil tank (5), filler cap with filter (6), breather with filter and
non−return valve (33), low pressure filter (32).
ZEIL08TC0004A0B 3
87734472B 05/05/2009
A.10.A / 18
17. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
18. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Valve stack
Hydrostatic drive unit without lateral flota-
tion:
Header height control valve (8), pilot valve (42), unloading
tube valve (13), reel vertical adjustment valve (15), reel
horizontal adjustment valve (17).
RNIL08TC0128A0A 4
Hydrostatic drive with lateral flotation:
Header height control valve (8), pilot valve (42), unload-
ing tube control valve (13), reel vertical adjustment valve
(15), reel horizontal adjustment valve (17), lateral flotation
control valve (28), load sensing valve (27).
RNIL08TC0127A0A 5
Mechanical drive unit without lateral flota-
tion:
Header height control valve (8), pilot valve (42), unloading
tube valve (13), reel vertical adjustment valve (15), reel
horizontal adjustment valve (17), drive variator valve (47).
ZEIL08TC0297A0B 6
Header lift cylinders (9).
ZEIL08TC0010A0B 7
87734472B 05/05/2009
A.10.A / 19