This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulic systems, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
New Holland W70BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W60BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W50BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It contains instructions for repair procedures, necessary tools, and specifications. The complete manual consists of two volumes, one covering the wheel loaders and one covering the engine. It lists contact information for questions and identifies print numbers to reference the correct volumes. Safety instructions are provided to prevent accidents during maintenance.
New Holland VN2080 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document contains specifications for a self-propelled grape harvester model VN 2080, including two variants. It includes dimensions, weights, engine specifications, hydraulic and steering systems, braking capabilities, and allowable slopes for operation with or without a destemmer installed. Key details are the machine's 129 kW diesel engine, maximum transport speed of 25 km/h, operating speed of 14 km/h, and ability to operate on slopes up to 20% without a destemmer or 10-19% with a destemmer installed, depending on the vineyard row spacing.
New Holland VN260 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed. The manual provides detailed technical specifications and diagrams of the hydraulic system components and their interactions to enable service and maintenance.
New Holland VN240 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed operation. The manual provides detailed technical specifications and diagrams for maintenance and repair of the hydraulic and drive components.
New Holland TV6070 Tractor Service Repair Manual Instant Download.pdftaishang3939
This document provides a table of contents for a tractor repair manual. It lists sections covering general information, the fuel system, air induction system, exhaust system, cooling systems, engine testing, transmissions, drivelines, hydrostatic drive components, auxiliary pump drive, splitter box removal and disassembly, engine end axle, cab end axle, cab end PTO, engine end PTO, brakes, and hydraulics and steering. Each section provides specifications, descriptions, troubleshooting, testing procedures, and instructions for removal and repair of components.
New Holland TN75 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN70 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN65 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TN55 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized service technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
The document is a service manual that provides an overview of the primary hydraulic power system for TC5000 combines. It includes technical specifications for the hydraulic pumps, diagrams showing the layout of hydraulic components, and identification of key parts such as the main hydraulic pump, steering pump, oil tank, filters, and valves that control functions like header height and unloading.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for various functions.
4. The document provides diagrams of the air compressor and pressure relief valve along with instructions for removing the air
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance should only be performed by trained technicians using the proper tools and procedures outlined in the manual. Unauthorized repairs may void warranties.
New Holland TC5070 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
Caterpillar Cat TH460B Telehandler (Prefix SLF) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing various engine components on a Caterpillar 3054E engine, including the cylinder head, rocker shaft, lifters, and camshaft. The procedures describe cleaning parts, lubricating bolts, and torquing fasteners to the specified values. Special tools may be required and safety precautions are noted regarding containing fluids.
Caterpillar Cat TH350B Telehandler (Prefix SLD) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing the valve mechanism cover on a 3054E engine. It describes:
1) Disconnecting the breather hose and removing nuts and washers to take off the valve cover, gasket and seal.
2) Inspecting the valve cover, gasket surfaces, and replacing worn parts before reinstallation.
3) Reinstalling the valve cover using a new gasket and seal, and reconnecting the breather hose. Tightening the nuts in a cross pattern.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
New Holland W70BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W60BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W50BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It contains instructions for repair procedures, necessary tools, and specifications. The complete manual consists of two volumes, one covering the wheel loaders and one covering the engine. It lists contact information for questions and identifies print numbers to reference the correct volumes. Safety instructions are provided to prevent accidents during maintenance.
New Holland VN2080 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document contains specifications for a self-propelled grape harvester model VN 2080, including two variants. It includes dimensions, weights, engine specifications, hydraulic and steering systems, braking capabilities, and allowable slopes for operation with or without a destemmer installed. Key details are the machine's 129 kW diesel engine, maximum transport speed of 25 km/h, operating speed of 14 km/h, and ability to operate on slopes up to 20% without a destemmer or 10-19% with a destemmer installed, depending on the vineyard row spacing.
New Holland VN260 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed. The manual provides detailed technical specifications and diagrams of the hydraulic system components and their interactions to enable service and maintenance.
New Holland VN240 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed operation. The manual provides detailed technical specifications and diagrams for maintenance and repair of the hydraulic and drive components.
New Holland TV6070 Tractor Service Repair Manual Instant Download.pdftaishang3939
This document provides a table of contents for a tractor repair manual. It lists sections covering general information, the fuel system, air induction system, exhaust system, cooling systems, engine testing, transmissions, drivelines, hydrostatic drive components, auxiliary pump drive, splitter box removal and disassembly, engine end axle, cab end axle, cab end PTO, engine end PTO, brakes, and hydraulics and steering. Each section provides specifications, descriptions, troubleshooting, testing procedures, and instructions for removal and repair of components.
New Holland TN75 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN70 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN65 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TN55 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized service technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
The document is a service manual that provides an overview of the primary hydraulic power system for TC5000 combines. It includes technical specifications for the hydraulic pumps, diagrams showing the layout of hydraulic components, and identification of key parts such as the main hydraulic pump, steering pump, oil tank, filters, and valves that control functions like header height and unloading.
New Holland TC5080 Combine Harvesters Service Repair Manual Instant Download ...taishang3939
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for various functions.
4. The document provides diagrams of the air compressor and pressure relief valve along with instructions for removing the air
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual Instant ...taishang3939
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance should only be performed by trained technicians using the proper tools and procedures outlined in the manual. Unauthorized repairs may void warranties.
New Holland TC5070 Combine Harvesters Service Repair Manual Instant Download.pdftaishang3939
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
Caterpillar Cat TH460B Telehandler (Prefix SLF) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing various engine components on a Caterpillar 3054E engine, including the cylinder head, rocker shaft, lifters, and camshaft. The procedures describe cleaning parts, lubricating bolts, and torquing fasteners to the specified values. Special tools may be required and safety precautions are noted regarding containing fluids.
Caterpillar Cat TH350B Telehandler (Prefix SLD) Service Repair Manual Instant...taishang3939
This document provides instructions for removing and installing the valve mechanism cover on a 3054E engine. It describes:
1) Disconnecting the breather hose and removing nuts and washers to take off the valve cover, gasket and seal.
2) Inspecting the valve cover, gasket surfaces, and replacing worn parts before reinstallation.
3) Reinstalling the valve cover using a new gasket and seal, and reconnecting the breather hose. Tightening the nuts in a cross pattern.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
7. INTRODUCTION
Foreword
TC5040, TC5050, TC5060, TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
84565976A 11/04/2012
3
8. INTRODUCTION
Basic instructions - How To Use and Navigate Through This Manual
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through Web delivery (eTim), DVD and in paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to
the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to
describe e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model for which the piece of technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customer's concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
84565976A 11/04/2012
4
9. INTRODUCTION
How to Use this Manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assem-
blies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assem-
blies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hy-
draulic devices, components and assemblies.
• Service Data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices,
components and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number 00, 35, 55, etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance X X X X X
05 - Machine completion and equipment
10 - Engine X X X X
14 - Main gearbox and drive
18 - Clutch X
21 - Transmission X X X X
23 - Four wheel drive system X X X
25 - Front axle system X X
27 - Rear axle system X X X X
29 - Hydrostatic drive X
31 - Implement power take-off
33 - Brakes and controls
35 - Hydraulic systems
36 - Pneumatic system
37 - Hitches, drawbars and implement couplings
39 - Frames and ballasting
41 - Steering
44 - Wheels
46 - Steering clutches
48 - Tracks and track suspension
50 - Cab climate control
55 - Electrical systems
56 - Grape harvester shaking
58 - Attachments/headers
60 - Product feeding
84565976A 11/04/2012
5
10. INTRODUCTION
61 - Metering system
62 - Pressing - Bale formation
63 - Chemical applicators
64 - Chopping
66 - Threshing
68 - Tying/Wrapping/Twisting
69 - Bale wagons
70 - Ejection
71 - Lubrication system
72 - Separation
73 - Residue handling
74 - Cleaning
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding
78 - Spraying
79 - Planting
80 - Crop storage / Unloading
82 - Front loader and bucket
83 - Telescopic single arm
84 - Booms, dippers and buckets
86 - Dozer blade and arm
88 - Accessories
89 - Tools
90 - Platform, cab, bodywork and decals
84565976A 11/04/2012
6
12. Engine - Engine air compressor
Air compressor - Static description
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
The air compressor (3) is a single cylinder, gear driven air compressor, which supplies air to a reservoir tank, enabling
the operator to have a source of compressed air for cleaning purposes and tyre inflation. The compressor is mounted
directly on the engine with the two nuts (10).
Engine oil is supplied through an internal connection with the engine, using engine oil pressure to lubricate the com-
pressor.
The compressed air is delivered through tubing to a combination pressure relief control valve, and from there to the
reservoir tank located on the straw hood of the combine. A quick disconnect fitting allows easy connection to the air
supply for blow off nozzles as well as for tyre inflation equipment.
ZEIL06CS0085A0B 1
84565976A 11/04/2012
10.450 / 3
13. Engine - Engine air compressor
Air compressor - Drawing
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
ZEIL11CX0668G0B 1
Reference Port Port Name Port Function
1 0 Inlet Port Supplies Compressor with clean intake air
2 2 Discharge Port Expels pressurized air for system
4 8.1 Oil Supply Supplies compressor with lube oil from engine
5 8.2 Oil Drain Allows lube oil to return to engine
6 9.1 Coolant Receive coolant from engine
7 9.2 Coolant Return coolant to engine
84565976A 11/04/2012
10.450 / 4
14. Engine - Engine air compressor
Compressed air tank Relief valve - Drawing
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
ZEIL11CX0667G0B 1
Reference Port Port name Port function
1 1 Inlet Pressurized air "in" from compressor
2 21 Outlet Pressurized air "out" to reservoir tank and blow
off line quick connect port
3 22 Auxiliary supply Auxiliary port not used in this application
4 1-2 Tire inflation device Port used to connect tire inflation device
5 3 Exhaust for compressor idling Discharge exhaust for excess pressure in system
84565976A 11/04/2012
10.450 / 5
15. Engine - Engine air compressor
Compressed air tank Relief valve - Static description
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
The pressure relief valve is developed to protect the system against pressures higher than 8 bar ( 116 psi).
Port (1) is connected to the air compressor, port (21) is connected to the pressurized reservoir.
When the pressure on port (21) reaches 8 bar ( 116 psi), the control valve (9d) will be activated which means that
also control valve (9c) will be activated. The pressure from the compressor will now pass through port (3).
If the pressure drops below 8 bar ( 116 psi) by activation a engaging valve, control valve (9d) will close.
Valve (9c) will not close immediately but will remain in the open position until the pressure exerted on the control of
valve (9c) will be reduced by 0.6 bar ( 8.7 psi). Then the air will pass through valve (9b).
Schematic diagram
ZDA7672Z 1
84565976A 11/04/2012
10.450 / 6
16. Engine - Engine air compressor
Air compressor - Remove
TC5070, TC5080, TC5070, TC5080, TC5080 Hillside
1. Bleed the air from the system by opening the drain
(2) at the bottom of the air reservoir.
ZEIL06TC00034A0 1
2. Loosen the retaining strap (1) and remove the air inlet
pipe (2) from the air compressor (3).
NOTE: Protect the air inlet and outlet ports from dirt
ingress.
3. Loosen the connection (4) to remove the hose (5)
from the air compressor (3).
ZEIL06CS0082A0B 2
4. Drain sufficient coolant from the engine cooling sys-
tem to allow removal of the coolant lines.
NOTE: Refer to the Operator’s Manual of your machine.
5. Loosen the connection (6).
ZEIL06CS0083A0B 3
6. Loosen the connection (7).
7. Remove the four bolts (8) to remove the support (9).
ZEIL06CS0084A0B 4
84565976A 11/04/2012
10.450 / 7
17. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
18. Engine - Engine air compressor
8. Remove the two nuts (10) to remove the air compres-
sor (3) from the engine.
ZEIL06CS0085A0B 5
84565976A 11/04/2012
10.450 / 8