This document is a service manual for New Holland T6 tractors that covers the engine, transmission, axles, brakes, hydraulics, hitches, steering, wheels, cab climate control, and electrical systems. It provides information on maintenance and repair of components for different tractor models, organized by part number and replacement dates. The manual contains over 50 sections that describe the components, controls, and systems of the tractors.
Still r70 40 fork truck service repair manualfhsjekkdkem
The document provides instructions for removing and installing the steer axle on STILL forklifts models 7032-34, 7038-40, and 7048-50. Key steps include disconnecting hydraulic lines and removing mounting bolts to separate the steer axle from the vehicle frame. Components like wheel hubs and stub axles can then be dismantled by removing nuts, seals, and bearings. Reassembly follows the reverse order, taking care to properly repack bearings with grease and apply specified torque to mounting hardware. The steer axle is also lubricated by pumping grease into fittings until fresh grease emerges.
Still r70 35 fork truck service repair manualfhsjekkdkem
The document provides instructions for removing and installing the steer axle on STILL forklifts models 7032-34, 7038-40, and 7048-50. Key steps include disconnecting hydraulic lines and removing mounting bolts to detach the steer axle. Installation is the reverse process, ensuring proper torque specs are followed and hydraulic lines are not swapped. The document also outlines lubrication points and procedures for maintaining components of the steer axle system.
Kubota l175 tractor parts catalogue manualfhsjekkdkem
The document provides instructions for parts books, including:
- Definitions of column headings on parts number pages like reference number, part number, description, etc.
- Notes on country codes that may be included for parts that differ by country.
- An example page from a parts book listing parts for a crank case with details like part numbers, descriptions, quantities, serial number ranges.
Kubota l35 tractor parts catalogue manualfhsjekkdkem
The document provides instructions and part listings for a parts book. It defines the column headings used in part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and their meanings. The summary lists key parts and their part numbers for the engine crankcase, oil pan, and piston and crankshaft.
Kubota g4200 h lawn mower parts catalogue manualfhsjekkdkem
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
Kubota bx2230 d tractor parts catalogue manualfhsjekkdkem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The document then provides an example page from the parts book with the defined columns listing specific part numbers and other details for various components of the BX2230D tractor model.
Kubota bx1500 d tractor parts catalogue manualfhsjekkdkem
The document provides instructions for using a parts book for an engine. It explains the column headings in parts book pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they indicate for part applicability in different countries. An example page from the parts book is then shown listing the reference number, part number, description, quantity and other details for each part.
Kubota bx24 d tractor parts catalogue manualfhsjekkdkem
This document provides instructions and part numbers for a parts book. It begins by explaining the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range indicators, interchangeability code, and remarks. It then provides a sample page from the parts book that lists part numbers for a crankcase assembly along with the corresponding information for each part.
Still r70 40 fork truck service repair manualfhsjekkdkem
The document provides instructions for removing and installing the steer axle on STILL forklifts models 7032-34, 7038-40, and 7048-50. Key steps include disconnecting hydraulic lines and removing mounting bolts to separate the steer axle from the vehicle frame. Components like wheel hubs and stub axles can then be dismantled by removing nuts, seals, and bearings. Reassembly follows the reverse order, taking care to properly repack bearings with grease and apply specified torque to mounting hardware. The steer axle is also lubricated by pumping grease into fittings until fresh grease emerges.
Still r70 35 fork truck service repair manualfhsjekkdkem
The document provides instructions for removing and installing the steer axle on STILL forklifts models 7032-34, 7038-40, and 7048-50. Key steps include disconnecting hydraulic lines and removing mounting bolts to detach the steer axle. Installation is the reverse process, ensuring proper torque specs are followed and hydraulic lines are not swapped. The document also outlines lubrication points and procedures for maintaining components of the steer axle system.
Kubota l175 tractor parts catalogue manualfhsjekkdkem
The document provides instructions for parts books, including:
- Definitions of column headings on parts number pages like reference number, part number, description, etc.
- Notes on country codes that may be included for parts that differ by country.
- An example page from a parts book listing parts for a crank case with details like part numbers, descriptions, quantities, serial number ranges.
Kubota l35 tractor parts catalogue manualfhsjekkdkem
The document provides instructions and part listings for a parts book. It defines the column headings used in part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and their meanings. The summary lists key parts and their part numbers for the engine crankcase, oil pan, and piston and crankshaft.
Kubota g4200 h lawn mower parts catalogue manualfhsjekkdkem
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
Kubota bx2230 d tractor parts catalogue manualfhsjekkdkem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The document then provides an example page from the parts book with the defined columns listing specific part numbers and other details for various components of the BX2230D tractor model.
Kubota bx1500 d tractor parts catalogue manualfhsjekkdkem
The document provides instructions for using a parts book for an engine. It explains the column headings in parts book pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they indicate for part applicability in different countries. An example page from the parts book is then shown listing the reference number, part number, description, quantity and other details for each part.
Kubota bx24 d tractor parts catalogue manualfhsjekkdkem
This document provides instructions and part numbers for a parts book. It begins by explaining the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range indicators, interchangeability code, and remarks. It then provides a sample page from the parts book that lists part numbers for a crankcase assembly along with the corresponding information for each part.
John deere sabre m23 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized by system with sections covering general information, specifications, electrical systems, components, troubleshooting, maintenance and repair. Safety instructions are provided throughout including proper protective equipment, safe fuel and chemical handling, emergency procedures, and machine operation safety practices.
John deere sabre m21 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized by system with sections covering general information, specifications, electrical systems, components, troubleshooting, maintenance and repair. It aims to be a comprehensive resource for experienced technicians working on these mower models. Safety precautions are outlined throughout and customer feedback is welcomed to help improve the manual.
John deere sabre m10 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized into sections covering various systems of the mower. Safety instructions are provided, including proper protective equipment, safe fuel and chemical handling, emergency procedures, and machine maintenance safety. Specification sections list torque values, lubrication requirements, and fuel and oil recommendations.
John deere pro gator utility vehicle attachments service repair manualfhsjekkdkem
This technical manual provides specifications and safety information for servicing a John Deere ProGator utility vehicle and its TC125 turf collection system and TD100 top dresser attachments. It begins with general safety guidelines and then provides section-by-section specifications, instructions, and repair procedures. Tables of contents, lubrication recommendations, torque specifications, and other reference materials are included.
John deere pro gator hd200 service repair manualfhsjekkdkem
This document is the technical manual for the Sprayer Attachment for the ProGator HD200. It provides an overview of the manual's contents and organization. The manual contains sections on specifications, identification numbers, tools and materials, component locations, schematics and harnesses, theory of operation, operation and diagnostics, tests and adjustments, and repair. Safety information is included at the beginning regarding personal protective equipment, safe work practices, and handling hazardous materials like batteries and high-pressure fluids.
John deere js series 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides service information for John Deere 21-inch walk-behind mowers with steel decks. It includes specifications, component locations, theory of operation, troubleshooting, testing and repair instructions. Safety warnings are provided throughout. The manual aims to be a comprehensive resource for experienced technicians to service these mower models.
John deere horicon hydraulic attachments service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications.
John deere f1145 front mower service repair manualfhsjekkdkem
This technical manual provides instructions for servicing a front mower. It contains sections on specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, adjustments, and repairs. Safety information is provided throughout. The manual is intended for experienced technicians working on this specific product.
John deere chainsaws cs81 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere chainsaws cs71 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere chainsaws cs62 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and safety
John deere chainsaws cs56 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists all manual sections for locating information
John deere chainsaws cs52 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and safety
John deere chainsaws cs46 service repair manualfhsjekkdkem
This technical manual provides instructions for servicing John Deere chainsaw models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The manual is organized by system and contains sections on specifications, identification numbers, tools, component locations, schematics, theory of operation, operation and diagnostics, repair, and safety. It provides the technician with information needed to service the chainsaws.
Husqvarna auto mower solar mower service repair manualfhsjekkdkem
This document provides installation and operation instructions for auto mower and solar mower models. It discusses best practices for installing the boundary wire around lawns, including considerations for large or sloping areas, separate working areas, and narrow passages. It also provides guidance on installing and using the auto mower charging station correctly. Troubleshooting tips are provided for issues like the mower not making proper contact with the charging station or losing contact during charging.
Husqvarna 2100 chainsaw service repair manualfhsjekkdkem
The document provides technical specifications and service data for a chain saw model. It includes sections on the fuel system, carburetor, and instructions for removal, inspection, and adjustment of the carburetor. The carburetor has a pumping section, metering section, and mixing section. It is important to check for wear or damage and adjust the needle valves during assembly. Basic carburetor adjustment sets the high and low needles to 1.0 and 1.2 turns open, respectively.
Husqvarna 575 xp chainsaw service repair manualfhsjekkdkem
This document provides technical data and service information for the Husqvarna 570 575XP chainsaw, including:
1. An overview of the contents and layout of the workshop manual.
2. Safety regulations and symbols to be aware of when servicing the chainsaw.
3. Technical specifications for the 570 and 575XP models such as displacement, power output, guide bar lengths, and fuel/oil capacities.
4. A list and descriptions of the specialized service tools required to repair the chainsaw.
Husqvarna 570 chainsaw service repair manualfhsjekkdkem
This document provides instructions for servicing a chainsaw, including dismantling, cleaning, inspection and assembly of various systems. It outlines safety regulations that must be followed when working on the chainsaw. Technical specifications are provided for the 570 and 575XP models. A list of required service tools is included. The sections cover the starter, electrical system, clutch, lubrication system, carburetor, tank unit, anti-vibration system, piston/cylinder, crankcase and crankshaft. Instructions are given for checking the chain brake and chain catcher safety equipment.
Husqvarna 455 rancher chainsaw service repair manualfhsjekkdkem
This document provides a workshop manual for repairing a Husqvarna 455 Rancher chainsaw. It includes sections on safety regulations, special tools needed, technical specifications, troubleshooting common issues, and detailed repair instructions for various components such as the carburetor, chain brake, silencer, and engine. The manual guides the user through dismantling and reassembling the entire chainsaw. It provides diagrams and descriptions of each component and gives step-by-step instructions for removal, cleaning, inspection, and refitting of parts. Lubrication and torque specifications are also included for repairing individual sub-assemblies or completely dismantling and reassembling the chainsaw.
Husqvarna 385 xp chainsaw service repair manualfhsjekkdkem
This document provides a workshop manual for repairing a 385XP chainsaw. It contains sections on safety regulations, symbols, technical data, service tools, troubleshooting, service information, and repair procedures for the starter, electrical system, clutch, lubrication system, carburetor, tank unit, anti-vibration system, cylinder and piston, crankcase, and crankshaft. The manual emphasizes safety precautions and provides diagrams and instructions for dismantling, cleaning, inspecting, and reassembling the various systems. Special tools are listed that may be required for certain repair steps.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
John deere sabre m23 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized by system with sections covering general information, specifications, electrical systems, components, troubleshooting, maintenance and repair. Safety instructions are provided throughout including proper protective equipment, safe fuel and chemical handling, emergency procedures, and machine operation safety practices.
John deere sabre m21 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized by system with sections covering general information, specifications, electrical systems, components, troubleshooting, maintenance and repair. It aims to be a comprehensive resource for experienced technicians working on these mower models. Safety precautions are outlined throughout and customer feedback is welcomed to help improve the manual.
John deere sabre m10 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides information for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized into sections covering various systems of the mower. Safety instructions are provided, including proper protective equipment, safe fuel and chemical handling, emergency procedures, and machine maintenance safety. Specification sections list torque values, lubrication requirements, and fuel and oil recommendations.
John deere pro gator utility vehicle attachments service repair manualfhsjekkdkem
This technical manual provides specifications and safety information for servicing a John Deere ProGator utility vehicle and its TC125 turf collection system and TD100 top dresser attachments. It begins with general safety guidelines and then provides section-by-section specifications, instructions, and repair procedures. Tables of contents, lubrication recommendations, torque specifications, and other reference materials are included.
John deere pro gator hd200 service repair manualfhsjekkdkem
This document is the technical manual for the Sprayer Attachment for the ProGator HD200. It provides an overview of the manual's contents and organization. The manual contains sections on specifications, identification numbers, tools and materials, component locations, schematics and harnesses, theory of operation, operation and diagnostics, tests and adjustments, and repair. Safety information is included at the beginning regarding personal protective equipment, safe work practices, and handling hazardous materials like batteries and high-pressure fluids.
John deere js series 21 inch walk-behind mower service repair manualfhsjekkdkem
This technical manual provides service information for John Deere 21-inch walk-behind mowers with steel decks. It includes specifications, component locations, theory of operation, troubleshooting, testing and repair instructions. Safety warnings are provided throughout. The manual aims to be a comprehensive resource for experienced technicians to service these mower models.
John deere horicon hydraulic attachments service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications.
John deere f1145 front mower service repair manualfhsjekkdkem
This technical manual provides instructions for servicing a front mower. It contains sections on specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, adjustments, and repairs. Safety information is provided throughout. The manual is intended for experienced technicians working on this specific product.
John deere chainsaws cs81 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere chainsaws cs71 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere chainsaws cs62 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and safety
John deere chainsaws cs56 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists all manual sections for locating information
John deere chainsaws cs52 service repair manualfhsjekkdkem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and safety
John deere chainsaws cs46 service repair manualfhsjekkdkem
This technical manual provides instructions for servicing John Deere chainsaw models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The manual is organized by system and contains sections on specifications, identification numbers, tools, component locations, schematics, theory of operation, operation and diagnostics, repair, and safety. It provides the technician with information needed to service the chainsaws.
Husqvarna auto mower solar mower service repair manualfhsjekkdkem
This document provides installation and operation instructions for auto mower and solar mower models. It discusses best practices for installing the boundary wire around lawns, including considerations for large or sloping areas, separate working areas, and narrow passages. It also provides guidance on installing and using the auto mower charging station correctly. Troubleshooting tips are provided for issues like the mower not making proper contact with the charging station or losing contact during charging.
Husqvarna 2100 chainsaw service repair manualfhsjekkdkem
The document provides technical specifications and service data for a chain saw model. It includes sections on the fuel system, carburetor, and instructions for removal, inspection, and adjustment of the carburetor. The carburetor has a pumping section, metering section, and mixing section. It is important to check for wear or damage and adjust the needle valves during assembly. Basic carburetor adjustment sets the high and low needles to 1.0 and 1.2 turns open, respectively.
Husqvarna 575 xp chainsaw service repair manualfhsjekkdkem
This document provides technical data and service information for the Husqvarna 570 575XP chainsaw, including:
1. An overview of the contents and layout of the workshop manual.
2. Safety regulations and symbols to be aware of when servicing the chainsaw.
3. Technical specifications for the 570 and 575XP models such as displacement, power output, guide bar lengths, and fuel/oil capacities.
4. A list and descriptions of the specialized service tools required to repair the chainsaw.
Husqvarna 570 chainsaw service repair manualfhsjekkdkem
This document provides instructions for servicing a chainsaw, including dismantling, cleaning, inspection and assembly of various systems. It outlines safety regulations that must be followed when working on the chainsaw. Technical specifications are provided for the 570 and 575XP models. A list of required service tools is included. The sections cover the starter, electrical system, clutch, lubrication system, carburetor, tank unit, anti-vibration system, piston/cylinder, crankcase and crankshaft. Instructions are given for checking the chain brake and chain catcher safety equipment.
Husqvarna 455 rancher chainsaw service repair manualfhsjekkdkem
This document provides a workshop manual for repairing a Husqvarna 455 Rancher chainsaw. It includes sections on safety regulations, special tools needed, technical specifications, troubleshooting common issues, and detailed repair instructions for various components such as the carburetor, chain brake, silencer, and engine. The manual guides the user through dismantling and reassembling the entire chainsaw. It provides diagrams and descriptions of each component and gives step-by-step instructions for removal, cleaning, inspection, and refitting of parts. Lubrication and torque specifications are also included for repairing individual sub-assemblies or completely dismantling and reassembling the chainsaw.
Husqvarna 385 xp chainsaw service repair manualfhsjekkdkem
This document provides a workshop manual for repairing a 385XP chainsaw. It contains sections on safety regulations, symbols, technical data, service tools, troubleshooting, service information, and repair procedures for the starter, electrical system, clutch, lubrication system, carburetor, tank unit, anti-vibration system, cylinder and piston, crankcase, and crankshaft. The manual emphasizes safety precautions and provides diagrams and instructions for dismantling, cleaning, inspecting, and reassembling the various systems. Special tools are listed that may be required for certain repair steps.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Link Product / Engine
Product Market Product Engine
T6.140 AutoCommand North America F4DFE413C*A
T6.150 AutoCommand North America F4DFE413B*A
T6.160 AutoCommand North America F4DFE413A*A
T6.120 North America F4DFE413E*A
T6.140 North America F4DFE413C*A
T6.150 North America F4DFE413B*A
T6.155 North America F4DFE613F*A
T6.160 North America F4DFE413A*A
T6.165 North America F4DFE613E*A
T6.175 North America F4DFE6132*A
47665870 27/03/2014
9. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed.
47665870 27/03/2014
3
10. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47665870 27/03/2014
4
11. INTRODUCTION
Safety rules
PRECAUTIONARY STATEMENTS
Personal Safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
Throughout this manual , you will find the signal words DANGER, WARNING, and CAUTION followed by special
instructions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
NOTICE: Install new decals if the old decals are destroyed, lost painted over or cannot be read. When parts are
replaced that have decals make sure you install a new decal with each new part.
MACHINE SAFETY
NOTICE: Notice indicates a situation which, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
INFORMATION
NOTE: Note indicates additional information which clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47665870 27/03/2014
10
12. INTRODUCTION
ACCIDENT PREVENTION
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
Most accidents or injuries that occur in workshops are the result of non compliance to simple and fundamental safety
principles. For this reason, IN MOST CASES THESE ACCIDENTS CAN BE AVOIDED by applying the fundamental
safety principles, acting with the necessary caution and care.
Accidents may occur with all types of machine, regardless of how well the machine in question was designed and
built.
SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND COMPONENTS - HY-
DRAULICS (EUROPEAN STANDARD EN982)
• Flexible hose assemblies must not be constructed from hoses which have been previously used as part of a hose
assembly.
• Do not weld hydraulic pipes: when flexible hoses or piping are damaged, replace them immediately.
• It is forbidden to modify a hydraulic accumulator by machining, welding or any other way.
• Before removing hydraulic accumulators for servicing, the liquid pressure in the accumulators must be reduced to
zero.
• Pressure check on hydraulic accumulators must be carried out by a method recommended by the accumulator
manufacturer.
• Take care not to exceed the maximum allowed pressure of the accumulator. After any check or adjustment, check
for leakages or gas in the hoses or pipes.
SAFETY RULES
General guidelines
• Carefully follow specified repair and maintenance procedures.
• When appropriate, use P.P.E (Personal Protective Equipment)
• Do not wear rings, wristwatches, jewellery, unbuttoned or loose articles of clothing such as: ties, torn clothing,
scarves, open jackets or shirts with open zips that may remain entangled in moving parts. It is advised to wear
approved safety clothing, e.g.: non-slip footwear, gloves, safety goggles, helmets, etc.
• Do not carry out repair operations with someone sitting in the driver's seat, unless the person is a trained technician
who is assisting with the operation in question.
• Do not operate the machine or use any of the implements from different positions, other than the driver's seat.
• Do not carry out operations on the machine with the engine running, unless specifically indicated.
• Bring all hydraulic cylinders to the home positions (down, retracted, etc.) before engine shut down.
• Stop the engine and check that the hydraulic circuits are pressure-free before removing caps, covers, valves, etc.
• All repair and maintenance operations must be carried out using extreme care and attention.
• Service steps and platforms used in the workshop or elsewhere should be built according to the applicable stan-
dards and legislation.
• Disconnect the power take off (p.t.o). and label the controls to indicate that the machine is being serviced. Any
parts that are to be raises must be locked in position.
47665870 27/03/2014
11
14. Engine - Engine and crankcase
Engine - Disconnect
T6.155 NA
T6.165 NA
T6.175 NA
Prior operation:
Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200)
Prior operation:
Disconnect battery, for further information refer to Battery - Disconnect (55.302)
Prior operation:
Drain the engine coolant system, for further information refer to Engine cooling system - Drain fluid (10.400)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, for further information refer to Selective Catalytic Reduction
(SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Remove the selective catalytic reduction (SRC) coolant control valve, for further information refer to Coolant control
valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. Using suitable lifting equipment support the front
weights.
BAIL07APH062AVA 1
47665870 27/03/2014
10.1 [10.001] / 13
15. Engine - Engine and crankcase
2. Disconnect and remove the front weights from the
weight carrier.
BAIL07APH063AVA 2
3. Disconnect the radar electrical connector and remove
the radar (if fitted).
BAIL10CVT358AVA 3
4. Remove the flywheel speed sensor.
BAIS06CCM087AVA 4
5. Disconnect the engine harness electrical connectors.
BAIL12APH142AVA 5
47665870 27/03/2014
10.1 [10.001] / 14
16. Engine - Engine and crankcase
6. Detach the cab heater return pipe.
BAIL07APH121AVA 6
7. Disconnect the oil cooler supply pipes.
BAIL12APH143AVA 7
8. Disconnect the oil cooler supply and return pipes (1).
Remove the oil cooler pipes (2).
BAIL12APH144AVA 8
9. Disconnect the heater supply hose from the rear of the
engine cylinder head.
BAIL12APH145AVA 9
47665870 27/03/2014
10.1 [10.001] / 15
17. Engine - Engine and crankcase
10. Remove the starter motor heat shield.
BAIL12APH146AVA 10
11. Remove the starter motor cover.
BAIL10CVT361AVA 11
12. Disconnect the starter motor electrical connector.
BAIL10CVT363AVA 12
13. Disconnect the positive terminal (1), negative terminal
(2) relay and bracket (3) and position to one side.
BAIL12APH147AVA 13
47665870 27/03/2014
10.1 [10.001] / 16
18. Engine - Engine and crankcase
14. Disconnect the starter motor negative cables.
BAIL10CVT364AVA 14
15. Detach the alternator wiring harness electrical con-
nector from the bracket (1) and detach the wiring har-
ness (2).
BAIL10CVT365AVA 15
16. Disconnect the alternator electrical connectors.
BAIL10CVT366AVA 16
17. Disconnect the brake fluid reservoir electrical connec-
tor (1) and detach the brake fluid reservoir (2) and po-
sition it to one side.
BAIL10CVT367AVA 17
47665870 27/03/2014
10.1 [10.001] / 17
19. Engine - Engine and crankcase
18. Remove the front brake retaining bracket (1) and re-
move the front brake pipe (2).
BAIL12APH148AVA 18
19. Disconnect the A/C pipe from the A/C compressor.
NOTE: Install blanking plugs/caps to all openings to pre-
vent dirt ingress.
BAIL10CVT368AVA 19
20. Disconnect the high pressure A/C pipe (1).
Disconnect the low pressure switch electrical connec-
tor (2).
BAIL12APH149AVA 20
21. Disconnect the charge air cooler intake pipe.
BAIL12APH150AVA 21
47665870 27/03/2014
10.1 [10.001] / 18
20. Engine - Engine and crankcase
22. Detach the A/C pipes and position it to one side.
BAIL12APH151AVA 22
23. Disconnect the steering hoses.
NOTE: Mark the hoses to aid installation.
BAIL07APH105AVB 23
24. Disconnect the fuel supply line from the pre-filter/wa-
ter trap.
BAIL12APH152AVA 24
25. Disconnect the fuel return line (1).
Disconnect the flywheel electrical connector (2).
BAIL12APH153AVA 25
47665870 27/03/2014
10.1 [10.001] / 19
21. Engine - Engine and crankcase
26. Cut the cable ties.
BAIL12APH154AVA 26
27. Cut the starter motor wiring harness cable ties.
BAIL12APH155AVA 27
28. Disconnect the engine earth connector.
BAIL10CVT433AVA 28
29. Disconnect the diff lock supply pipe (1) and pneumatic
brake supply pipe (2).
Remove the pipe retaining bracket (3) and remove the
pipes.
BAIL07APH379AVA 29
47665870 27/03/2014
10.1 [10.001] / 20
22. Engine - Engine and crankcase
Vehicles with SuperSteer™ front axle
Remove the four-wheel drive shaft guard retaining bolts.
Remove the four-wheel drive shaft guard.
NOTE: Repeat the operation on both sides of the vehicle.
BAIS06CCM033AVA 30
Remove the four-wheel drive shaft front retaining bolts.
NOTE: Support the four-wheel drive shaft.
BAIS06CCM034AVA 31
30. Remove the four-wheel drive shaft.
BAIS06CCM035AVB 32
Vehicles with standard front axle
31. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 33
47665870 27/03/2014
10.1 [10.001] / 21
23. Engine - Engine and crankcase
32. Remove the drive shaft flange, where fitted.
BSD1917A 34
Vehicles with suspended front axle
33. Remove the front wheel drive shaft guard.
BAIL12APH156AVA 35
34. Remove the circlip (1).
Slide the drive shaft sleeve (2).
BAIL12APH182AVA 36
35. Disconnect the drive shaft bearing carrier.
BAIL12APH158AVA 37
47665870 27/03/2014
10.1 [10.001] / 22
24. Engine - Engine and crankcase
All vehicles
36. Using the tractor splitting equipment 380040228 In-
stall the larger wheeled part of the splitting equipment
under the front weight carrier.
BAIL12APH159AVA 38
37. Position the static part of the splitting equipment under
the transmission and secure to the transmission.
Install the smaller wheeled part of the splitting equip-
ment under the engine.
BAIL12APH160AVA 39
38. Connect the two pieces of the wheeled splitting gear
together with the alignment bar.
BAIL12APH161AVA 40
39. Support the rear of the vehicle.
BAIL07APH145AVA 41
47665870 27/03/2014
10.1 [10.001] / 23
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Engine - Engine and crankcase
40. Remove the left-hand side engine to transmission se-
curing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 42
41. Remove the centre engine to transmission securing
bolt (2). Remove the top left-hand engine to transmis-
sion securing bolt (1).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 43
42. Separate the engine from the transmission.
BAIL12APH161AVA 44
47665870 27/03/2014
10.1 [10.001] / 24
27. Engine - Engine and crankcase
Engine - Connect
T6.155 NA
T6.165 NA
T6.175 NA
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces and apply a bead of sealant.
2. Align the front support and engine assembly to the
transmission and relocate.
Tighten to 285-315 Nm ( 210-232 lb ft).
BAIL12APH161AVA 1
3. Install the centre engine to transmission securing bolt
(2). Install the top left hand engine to transmission se-
curing bolt (1). Tighten to 285-315 Nm ( 210-232 lb ft).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 2
47665870 27/03/2014
10.1 [10.001] / 25
28. Engine - Engine and crankcase
4. Install the left-hand side engine to transmission secur-
ing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 3
5. Remove the support from the rear of the vehicle.
BAIL07APH145AVA 4
6. Disconnect the two pieces of the wheeled splitting gear
380040228 by removing the alignment bar.
BAIL12APH161AVA 5
47665870 27/03/2014
10.1 [10.001] / 26