The NVIROMON is an environmental monitoring and control system that allows remote monitoring of devices and environmental conditions in datacenters and remote sites. It senses when conditions exceed thresholds and sends alerts. It can also control reactions to contain damage from certain conditions. It monitors temperature, humidity, flooding, air flow, and fluid levels using sensors. It can also detect fires and control fire extinguishers. It redirects communications to managed devices and controls secure access to sites using biometrics, RFID, and sensors. It reports violations of conditions via SNMP, SMS, email, and alarms.
2. Biometric
reader
NVIROMON
DATACENTER and REMOTE SITE MANAGEMENT,
ENVIRONMENTAL MONITORING AND CONTROL SYSTEM
Fire protection
Access control & security
Flood sensors
NH20RS485
Environmental
monitoring
Power management
Wireless Base Station
Serial comm’s
3. NVIROMON
The NVIROMON …..
• … allows for easy monitoring, control of devices and environmental conditions
in either Datacenters, Wire centers or remote site facilities from virtually
anywhere on the network using SNMP, SMS’s or Email’s
• … senses when environmental conditions exceed preset thresholds or alarm
conditions and reacts with alert notification to the appropriate event
management system or applicable mobile phone.
• … can be preset to react to certain conditions with the appropriate control
reaction to contain any possible damage.
4. NVIROMON monitor and control
The NVIROMON typically uses
Serial interfaces, I/O (Digital and analogue inputs and outputs), AC/DC
probes, Ethernet connectivity and GSM module
to
• … monitor and control environmental conditions
o Temperature,
o Relative Humidity,
o Flooding,
o Air Flow,
o Fluid Levels.
• … detect fire and smoke using
o optical Smoke detectors and
o can control fire extinguishers and
o interlink with fire systems.
5. NVIROMON
…
• … redirects serial communications to out of band managed devices –
o UPS’s,
o Base stations,
o Backup generators,
o HVAC’s and Air Conditioners,
o Billing systems.
• … controls and gives secure logged access and security to datacenters and
remote sites utilizing
o Wiegand interfaced keypad, RFID and Biometric scanners and
o monitoring seismic, IR motion, beam, door contacts and other
intrusion sensors
o linking events (time stamped) to surveillance systems.
• … control and Monitoring of Digital Inputs and outputs that can switch and
check devices like push buttons, counts, strobe lights, sirens, …
6. Remote Management
The NVIROMON uses
SNMP, GSM SMS’s, Email and Local alarms to indicate, control and
report violation of preset user definable conditions.
• SNMP – function include TRAP, GET, SET and POLL options and can be used to
setup and remotely configure the unit.
• GSM SMS’s (only preregistered users numbers) can be used as
o after hours and/or very high priority alarm messaging,
o remote access and emergency access control,
o Manual Digital Output control,
o automated alarm escalation,
o automated service or maintenance scheduling.
7. NVIROMON SAFETY NET
The NVIROMON monitors,
controls and reports on
multiple disciplines utilizing
various system and integrates
multiple function into one
unit using one device with
one IP address.
10. Netshield’s MonitorOne
SNMP Management Software
• The NVIROMON can be remotely configured, controlled and monitored either
the Netshield MonitorOne network management software or any other
SNMP NMS.
• Multiple datacenters and remote site managed with the NVIROMON can
report to a single or multiple NMS stations.
• More than 800 configurable settings are available to control the NVIROMON.
• These settings range from Site name through to environmental limit settings
eg temperature, Humidity …
• Other OEM SNMP based product can be managed from MonitorOne.