We would like to introduce our company Natron Equipment & Spares Pvt. Ltd. that has been in business of Coffee equipment & spare parts, Soft Drink equipment & spare parts, Beer equipment & spare parts, Water Purification equipment & spare parts, Liquor equipment & spare parts and Refrigerator & AC equipment & spare parts & commercial equipment and spare parts industry. The best explanation for our business is: JUST, WHAT YOU NEED
Low rate Call girls in Delhi Justdial | 9953330565
NESPL Clamps
1. NESPL CLAMPS
What exactly Clamping is?
It is a well-known process to locate the work piece on the surfaces, after pressing and holding against
the work forces. The specific tool designed for the same process is known as the clamps.
NESPL, we can provide you countless variations of Clamps, you will not believe how two pipes can be
joined together hassle-free.
We deal in several types of pipe Clamps for Piping and Plumbing Industry.
Types of Clamps
Adjustable Pipe Clamps:
These are mostly SS Clamps, can adjust themselves as per the required size of pipe. These are
perfectly adjusted and easily tighten and loosen as per the pipe OD. They are cost-effective
Clamps as these can be used universally.
Rubber Lined
Containing a layer of rubber these types of clamps help in avoiding Galvanic corrosion as metal-
to-metal contact is prevented. These clamps must be used with the consideration, as rubber line
should sustain that temperature.
www.natronequipments.com
2. Rigid Clamps
These are made up of stainless steel or iron can be constructed simply.
U-Bolt
These are the most widely used type of pipe clamps. Those are widely applied for tiny bore stiff
tubing. They are perfectly worked as Rest + Guide + Hold Down or Rest + Guide + Hold Down +
Line stops for small bore piping systems. For Pipes with a diameter exceeding 8 inches, their
extent as the piping loads increases with the increase in pipe sizes.
How to Choose a pipe clamp?
Pipe Material
Ideally, the clamp material should match the pipe material. For example, SS pipes need an SS
clamp to prevent galvanic corrosion.
Pipe Temperature
As the temperature of the pipe material changes, pipes expand or contract. So, the clamps
selected should be able to withstand those temperature fluctuate.
Load Bearing Capability
Clamps should be selected based on the application piping loads. Normally, all manufacturers’
catalogs specify the maximum load-carrying of both standard and heavy versions of pipe clamps.
Consequently, pipe clamp selection must be based on the pipe support loads. Clamps are
avoided for axial load applications, such as stopping lines. But in some small size lines fixed up
clamps are used as line stop supports.
Pipe OD:
The diameter of the pipe or the pipe size also influences the choice of clamp. A clamp is usually
made for a certain pipe diameter, from minimum to maximum. When selecting pipe clamps,
manufacturers' catalogs should be checked.
Working Environment:
The type of Clamps is also affected by the working environment, where the piping clamps will be
installed. Pipe clamps will be exposed to the environment, so a corrosion-resistant coating is
required.
Special Requirements:
Distinctive features for Pipe Clamps may include rubber linings and noise absorption. So, clamps
need to be selected based on the special functions required.
www.natronequipments.com
3. The size of the clamp needs to be determined:
Pipe Outside Diameter: The pipe outer diameter is fixed for metallic pipes, so clamps are
selected based on the pipe outer diameter. For plastic pipes, the OD varies from manufacturer
to manufacturer, so the clamp should be chosen according to this OD
Special Consideration: Sometimes, it may be necessary to use clamps over pipe insulation. In
such cases, the OD of insulation must be considered when deciding the pipe clamp size.
Features of Pipe Clamps:
Simple Operation
Easy Installation
Adjustable in a Small Range
Nice Appearance
Temperature ranges are determined by the clamping lining.
It is typical for all pipe clamps to have impact resistance.
Installation and layout of pipes are quick and easy
Property of shock absorption
Vibration dampening property
Acoustic reduction property
Heavy Torque
Appropriate for tiny and huge width pipes
Applications:
To fasten and fix pipes with structure to provide support.
Providing fast, safe, and cost-effective service and installation.
Additionally, Pipe Clamps can be used to prevent noise and vibration, as well as absorb shock.
Tags:
Ear Clamp Size Chart # Ear Clamp Tools # Ear Clamp Distributor in India # Ear Clamps Best Prices # Ear
Clamps Pliers # Stainless Steel Tube Fittings
www.natronequipments.com