This document summarizes biofuels as an alternative energy source for aviation. It discusses various types of biofuels including ethanol, cellulosic ethanol, and biodiesel from sources such as palm oil, algae, and halophytes. Ethanol is currently the most widely used biofuel but relies heavily on corn as a feedstock. Cellulosic ethanol offers greater potential as it can use non-food biomass sources. Biodiesel alternatives are also investigated.
This document provides a list of references related to greening the Diridon area of San Jose. It includes references organized under the following topics: land use, transportation, air quality, greenhouse gases, hydrology, and biological resources. Some of the key strategies referenced include increasing housing density near transit, promoting native plants and reducing heat islands, implementing transportation demand management programs, improving bike routes and transit, reducing vehicle pollution, assessing life cycle costs and climate change mitigations, addressing sea level rise and stormwater infiltration, and incorporating bird-friendly design.
The document summarizes 12 funding opportunities from various government agencies related to sustainability, renewable energy, environmental study, and healthy homes. It provides brief descriptions of each opportunity including the funding agency, areas of interest, expected funding amounts, response deadlines, and contact information. The document also provides instructions for subscribing to future funding newsletters from the author.
Water and Shale Gas Development - Leveraging the US experience in new shale d...Marcellus Drilling News
A new report by global consulting firm Accenture that looks at the efficient and innovative ways the United States has dealt with water use in shale gas drilling. Accenture offers the U.S. as a model template for other countries who may be considering how (and whether) to frack their own shale deposits.
This document discusses opportunities for utilizing geothermal resources in the United States. It begins by providing background on renewable energy generation in the US, including centralized plants and distributed generation. It then analyzes a study of renewable energy production in LEED-certified buildings in northern US states. The document goes on to describe various applications of geothermal energy like direct use, power generation, cogeneration, enhanced geothermal systems, and geothermal heat pumps. It also reviews the benefits and costs of different geothermal technologies. The document uses Iceland as a case study to illustrate geothermal development and policies. It concludes by recommending increased adoption of geothermal heat pumps and capacity additions in the US through various
Fact-Based Regulation for Environmental Protection in Shale Gas DevelopmentMarcellus Drilling News
Study released in Feb 2012 by the Energy Institute at the University of Texas which looks at the science of hydraulic fracturing and a potential link between fracking and groundwater contamination. The study's conclusion: there is no link. Fracking itself does not contaminate groundwater. There are legitimate concerns about drilling, but those issues exist in conventional drilling--they are not specific to fracking.
Ports-to-Plains Energy Summit
Omni Interlocken Resort
Broomfield, CO
April 7, 2011
Hydraulic fracturing has been in the news lately. Learn exactly what the process is and how it is impacting economic growth and energy security.
The document summarizes the key findings of a study by the Energy Institute at The University of Texas at Austin on the environmental and health impacts of shale gas development through hydraulic fracturing. The study found: 1) No evidence that hydraulic fracturing contaminated groundwater, but some surface spills posed risks; 2) Methane in water was likely from natural sources; 3) State regulations varied and lacked enforcement in some areas like wastewater disposal; 4) Media coverage of fracking was overwhelmingly negative despite little mention of scientific research finding few environmental impacts.
The development of clean, affordable nuclear power options is a key element of the Department of Energy’s Office of Nuclear Energy (DOE-NE) Nuclear Energy Research and Development Roadmap. As a part of this strategy, a high priority of the Department has been to help accelerate the timelines for the commercialization and deployment of small modular reactor (SMR) technologies through the SMR Licensing Technical Support program. Begun in FY12, the DOE Office of Nuclear Energy’s Small Modular Reactor Licensing Technical Support program will advance the certification and licensing of domestic SMR designs that are relatively mature and can be deployed in the next decade.
More information : http://www.sfen.org/
This document provides a list of references related to greening the Diridon area of San Jose. It includes references organized under the following topics: land use, transportation, air quality, greenhouse gases, hydrology, and biological resources. Some of the key strategies referenced include increasing housing density near transit, promoting native plants and reducing heat islands, implementing transportation demand management programs, improving bike routes and transit, reducing vehicle pollution, assessing life cycle costs and climate change mitigations, addressing sea level rise and stormwater infiltration, and incorporating bird-friendly design.
The document summarizes 12 funding opportunities from various government agencies related to sustainability, renewable energy, environmental study, and healthy homes. It provides brief descriptions of each opportunity including the funding agency, areas of interest, expected funding amounts, response deadlines, and contact information. The document also provides instructions for subscribing to future funding newsletters from the author.
Water and Shale Gas Development - Leveraging the US experience in new shale d...Marcellus Drilling News
A new report by global consulting firm Accenture that looks at the efficient and innovative ways the United States has dealt with water use in shale gas drilling. Accenture offers the U.S. as a model template for other countries who may be considering how (and whether) to frack their own shale deposits.
This document discusses opportunities for utilizing geothermal resources in the United States. It begins by providing background on renewable energy generation in the US, including centralized plants and distributed generation. It then analyzes a study of renewable energy production in LEED-certified buildings in northern US states. The document goes on to describe various applications of geothermal energy like direct use, power generation, cogeneration, enhanced geothermal systems, and geothermal heat pumps. It also reviews the benefits and costs of different geothermal technologies. The document uses Iceland as a case study to illustrate geothermal development and policies. It concludes by recommending increased adoption of geothermal heat pumps and capacity additions in the US through various
Fact-Based Regulation for Environmental Protection in Shale Gas DevelopmentMarcellus Drilling News
Study released in Feb 2012 by the Energy Institute at the University of Texas which looks at the science of hydraulic fracturing and a potential link between fracking and groundwater contamination. The study's conclusion: there is no link. Fracking itself does not contaminate groundwater. There are legitimate concerns about drilling, but those issues exist in conventional drilling--they are not specific to fracking.
Ports-to-Plains Energy Summit
Omni Interlocken Resort
Broomfield, CO
April 7, 2011
Hydraulic fracturing has been in the news lately. Learn exactly what the process is and how it is impacting economic growth and energy security.
The document summarizes the key findings of a study by the Energy Institute at The University of Texas at Austin on the environmental and health impacts of shale gas development through hydraulic fracturing. The study found: 1) No evidence that hydraulic fracturing contaminated groundwater, but some surface spills posed risks; 2) Methane in water was likely from natural sources; 3) State regulations varied and lacked enforcement in some areas like wastewater disposal; 4) Media coverage of fracking was overwhelmingly negative despite little mention of scientific research finding few environmental impacts.
The development of clean, affordable nuclear power options is a key element of the Department of Energy’s Office of Nuclear Energy (DOE-NE) Nuclear Energy Research and Development Roadmap. As a part of this strategy, a high priority of the Department has been to help accelerate the timelines for the commercialization and deployment of small modular reactor (SMR) technologies through the SMR Licensing Technical Support program. Begun in FY12, the DOE Office of Nuclear Energy’s Small Modular Reactor Licensing Technical Support program will advance the certification and licensing of domestic SMR designs that are relatively mature and can be deployed in the next decade.
More information : http://www.sfen.org/
Lattice Energy LLC- Report Reveals Boeing and NASA Investigating LENR-powered...Lewis Larsen
There is a recent NASA government contract report titled, “Subsonic Ultra Green Aircraft Research Phase II: N+4 Advanced Concept Development,” by Marty K. Bradley and Christopher K. Droney of Boeing Research and Technology, Huntington Beach, California. The document reveals that Boeing and NASA are now jointly investigating the possibility of using low energy nuclear reactions (LENRs) to power advanced versions of future “green aircraft.”
This document provides an overview of several topics related to watershed and conservation issues, including:
1) Wildfires and other natural hazards are worsening due to climate change, damaging watersheds.
2) Green infrastructure is often more cost-effective than traditional "grey" infrastructure for stormwater management and provides additional benefits.
3) Agriculture is facing challenges including farm consolidation reducing smaller farms, losses for corn farmers, and widespread land degradation impacting productivity.
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)guesta70415
The document discusses the potential for hydrogen energy as an alternative to fossil fuels. It outlines the various components involved, from production through delivery, storage, conversion and end use. While promising, hydrogen energy technologies are still in development and lag behind other renewable options like solar and wind. The document argues researchers should focus on improving biophotolysis for production, carbon adsorption/physisorption for storage, and fuel cells for conversion to help hydrogen energy contribute to the global energy supply in the future.
From Algae to Biofuels: An Integrated System Approach to Renewable Energy ZY8
This document summarizes the key findings from a National Algal Biofuels Technology Roadmap Workshop held in 2008:
- The workshop brought together over 200 experts to identify challenges to producing algal biofuels commercially.
- While algae have potential advantages as a feedstock, scaling up cultivation and processing into affordable, sustainable fuels faces major technical hurdles.
- The roadmap documents these challenges across the entire supply chain from algal strain selection to conversion processes.
- The goal is to guide further research, partnerships, and policy to enable commercial production of algal biofuels.
This document summarizes the synthesis, processing, and characterization of inorganic-organic hybrid aerogels. The aerogels were synthesized through the sol-gel polymerization of tetramethoxysilane and 3-aminopropyltriethoxysilane, followed by crosslinking with polyamic acid or polyimide. The resulting aerogels were characterized through various techniques and showed tunable properties based on the synthetic conditions and components, such as density, surface area, and mechanical strength.
This document summarizes the qualifications and experience of Kostas Dovantzis, a principal remediation engineer and project manager with over 30 years of experience in environmental consulting, waste management, and site remediation. He has managed numerous large, complex remediation projects for industrial, commercial, and government clients. Key aspects of his experience include developing innovative sampling techniques that saved clients $20 million, managing oversight of investigation, design, and construction activities worth $300 million, and successfully negotiating the scope of over 100 remediation projects internationally.
Cross-Community User Requirements and the Biodiversity Heritage LibraryChris Freeland
The document summarizes the Biodiversity Heritage Library (BHL), a global consortium of natural history libraries working to digitize biodiversity literature. It discusses BHL's partnerships, digital collections and services including OpenURL and a names lookup API. It also describes considerations for adopting cloud storage including costs, technical skills and control issues. Lessons from a DuraCloud pilot show cloud is useful for scaling but huge files are problematic and repository management requires social infrastructure. BHL aims to make over 90,000 volumes and 34 million pages freely available online while serving the needs of a broad user community.
This document provides an overview of how to find information in civil and environmental engineering. It discusses the scientific method and how it relates to information retrieval. Various formats for scientific and technical literature are described, including journals, conference proceedings, magazines, books, encyclopedias, and databases. Specific databases relevant to civil engineering are also outlined, such as Scopus, Scifinder Scholar, and those from the American Society of Civil Engineers. The document concludes with tips for developing effective search strategies and evaluating sources.
This document summarizes a report on transforming U.S. energy innovation produced by researchers at Harvard Kennedy School. It discusses the need for an energy technology revolution to address climate change and energy security challenges. The U.S. energy innovation system involves government investments in energy research and development as well as policies to drive private sector deployment of new technologies. However, private markets alone are insufficient for energy innovation due to long timescales and risks. The report evaluates U.S. energy budgets and policies and provides recommendations to improve energy technology development and deployment.
This document provides a summary of the qualifications and experience of Kostas Dovantzis. He has over 30 years of experience in environmental engineering consulting with a focus on site assessment, remediation, and litigation support. He holds a PhD in Environmental Engineering and is a licensed Professional Engineer. He has managed over 100 remediation projects and has expertise in innovative remediation technologies. His major clients include Dow, DuPont, BP, and government agencies like the EPA and Navy. He has significant experience developing cost-effective remediation strategies and achieving regulatory closure.
PROGRESS IN DEFINING THE WATER-ENERGY NEXUS: WHAT’S NEXT?U.S. Water Alliance
This presentation will showcase the Blueprint for Action, a collaborative effort between the Alliance for Water Efficiency and American Council for an Energy-Efficient Economy that spells out over 50 recommendations for needed actions in the areas of program, policy, research, and codes and standards. Since the publication of the Blueprint in May of 2011, several initiatives are now underway which will be outlined in the presentation.
Part 1 clean-water_presentation_2-22-15Eric Mcclure
The document discusses a technology for removing heavy metals and contaminants from water sources to produce clean drinking water. It notes that the technology was developed by researchers at Rice University, including Professor Andrew Barron, and has received numerous patents and awards. The technology uses a proprietary nanotube-infused quartz material to filter water and extract reclaimable metals, providing a low-cost solution for water purification that can treat a variety of contaminated water sources.
This document discusses exploring human contributions to safety in commercial aviation. It identifies strategies pilots and air traffic controllers use to perform their jobs successfully despite routine disturbances. Interviews found they anticipate issues and adapt operations, but these "positive" behaviors are not systematically captured. Flight data showed evidence of strategies like slowing descent rates to avoid speed exceedances. The assessment recommends defining safety as both preventing failures and ensuring success, and developing methods to systematically collect and analyze data on resilient performance strategies from observer reports, operator reports, and aircraft data. This could improve understanding of how humans contribute to safety to inform system design decisions.
This chapter provides an introduction to various renewable energy technologies, including solar (photovoltaic and thermal), wind, biomass, and hydropower. It describes the basic processes and components involved in harnessing energy from these sources. For each technology, the chapter discusses typical efficiencies, applications, and cost characteristics. The technologies covered can be used to generate electricity directly or to produce thermal or mechanical energy. Overall, the chapter aims to give the reader a foundational understanding of the major renewable energy options.
This document proposes a stepwise approach to conducting a water-energy-food nexus assessment. The assessment aims to understand interactions between water, energy and food systems in a given context and evaluate the performance of interventions. The assessment involves analyzing the current context, applying specific tools to quantify impacts, and assessing interventions' resource use efficiency and productivity versus context status. Key stakeholders should be engaged throughout to build consensus on strategic issues across sectors and scales. The assessment helps inform nexus-related strategies, policies, planning and institutional responses.
Leadership in Energy & Environmental Design (LEED) and other green building standards are setting a new bar for energy efficiency in the built environment. Michigan has seen it's share of highly visible success stories recently which have been driven by visionary architects, builders and property owners. Our expert panel will discuss implications for goal setting, strategies, new technologies, public policy and career opportunities.
This document profiles two lesser-known data sources for ecological and environmental data: CEED and Ecological Archives. CEED is a data repository containing peer-reviewed and non-peer-reviewed data primarily related to southern California organisms and environments. Users can search and browse metadata and download data files through FTP after registering. Ecological Archives is a public archive publishing supplemental materials to articles in Ecological Society of America journals, including data papers which are peer-reviewed compilations of datasets. It provides long-term access to these materials.
This document summarizes a media call about building a vibrant solar workforce. It discusses the Solar Ready Vets program, which trains US veterans for careers in the solar industry. The call featured representatives from the Department of Defense, military bases, community colleges, and solar companies. It provided details on existing and new Solar Ready Vets training programs located at military bases across the US. The document also summarized recent Solar Training and Education for Professionals awards totaling over $10 million that aim to expand solar training opportunities.
GBIF BIFA mentoring, Day 5a Data management, July 2016Dag Endresen
GBIF BIFA mentoring in Los Banos, Philippines for the South-East Asian ASEAN Biodiversity Heritage Parks. With Dr. Yu-Huang Wang, Dr. Po-Jen Chiang, and Guan-Shuo Mai from TaiBIF the GBIF node of Taiwan (Chinese Tapei); and the Biodiversity Informatics team at ASEAN Centre For Biodiversity. http://www.gbif.no/events/2016/gbif-bifa-mentoring.html
Credits: EUDAT/OpenAire, December 2015 & May 2016, CC-BY-4.0
* http://www.slideshare.net/EUDAT/eudat-research-data-management
* http://www.slideshare.net/EUDAT/research-data-management-introduction-eudatopen-aire-webinar?ref=https://eudat.eu/events/webinar/research-data-management-an-introductory-webinar-from-openaire-and-eudat
* https://eudat.eu/events/webinar/research-data-management-an-introductory-webinar-from-openaire-and-eudat
* http://www.instantpresenter.com/WebConference/RecordingDefault.aspx?c_psrid=EB57D6888147
AN ALGAE RESEARCH FACILITY FOR BIOFUEL AND BYPRODUCT DEVELOPMENT INTEGRATING ...Wendy Hager
This document proposes an algae research facility that integrates algae cultivation systems into the building architecture. The facility aims to develop biofuels and byproducts from algae to address issues like climate change, oil dependency, and economic growth. It will provide research spaces for scientists and produce commercial products. The proposal discusses the need for alternative fuels in the Philippines and reviews literature on worldwide algae research. It outlines goals of finding user needs, determining space requirements, and creating a state-of-the-art facility that attracts researchers. The document also discusses integrating sustainable technologies and cultivation methods into the architectural design. Site selection, analysis and programming data will be used to develop design concepts that translate the facility's goals.
Scry analytics article on data analytics outsourcing, nov. 18, 2014Shyam Sarkar
This document discusses knowledge process outsourcing (KPO) and data analytics outsourcing from India. It makes the following key points:
1) The KPO industry in India has grown rapidly but data analytics outsourcing specifically is overhyped, growing at a more modest rate of 18% annually through 2020 rather than the hype of reducing US shortages.
2) Most Indian firms focus on lower-level data management and business intelligence rather than predictive analytics, generating insights, or deep domain expertise required for complex analytics projects.
3) Seven myths are discussed around India's ability to meet demand for experienced analytics professionals and reduce shortages in the US. Reality is the Indian industry is still nascent
This document provides a summary of Rabindranath Tagore's 1930 travelogue "Russiar Chithi" (Letters from Russia) and discusses the politics of its translation into English and Russian. It notes that Tagore initially praised aspects of the Soviet system like education reform, but later criticized the repressive nature of Stalin's regime. The English translation of Tagore's work was censored by the British government due to criticisms of British colonial rule in India. Meanwhile, the Russian translation omitted Tagore's criticisms of communist excess. Overall, the document examines how the reception and circulation of Tagore's translated texts were influenced by various political powers and agendas.
Lattice Energy LLC- Report Reveals Boeing and NASA Investigating LENR-powered...Lewis Larsen
There is a recent NASA government contract report titled, “Subsonic Ultra Green Aircraft Research Phase II: N+4 Advanced Concept Development,” by Marty K. Bradley and Christopher K. Droney of Boeing Research and Technology, Huntington Beach, California. The document reveals that Boeing and NASA are now jointly investigating the possibility of using low energy nuclear reactions (LENRs) to power advanced versions of future “green aircraft.”
This document provides an overview of several topics related to watershed and conservation issues, including:
1) Wildfires and other natural hazards are worsening due to climate change, damaging watersheds.
2) Green infrastructure is often more cost-effective than traditional "grey" infrastructure for stormwater management and provides additional benefits.
3) Agriculture is facing challenges including farm consolidation reducing smaller farms, losses for corn farmers, and widespread land degradation impacting productivity.
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)guesta70415
The document discusses the potential for hydrogen energy as an alternative to fossil fuels. It outlines the various components involved, from production through delivery, storage, conversion and end use. While promising, hydrogen energy technologies are still in development and lag behind other renewable options like solar and wind. The document argues researchers should focus on improving biophotolysis for production, carbon adsorption/physisorption for storage, and fuel cells for conversion to help hydrogen energy contribute to the global energy supply in the future.
From Algae to Biofuels: An Integrated System Approach to Renewable Energy ZY8
This document summarizes the key findings from a National Algal Biofuels Technology Roadmap Workshop held in 2008:
- The workshop brought together over 200 experts to identify challenges to producing algal biofuels commercially.
- While algae have potential advantages as a feedstock, scaling up cultivation and processing into affordable, sustainable fuels faces major technical hurdles.
- The roadmap documents these challenges across the entire supply chain from algal strain selection to conversion processes.
- The goal is to guide further research, partnerships, and policy to enable commercial production of algal biofuels.
This document summarizes the synthesis, processing, and characterization of inorganic-organic hybrid aerogels. The aerogels were synthesized through the sol-gel polymerization of tetramethoxysilane and 3-aminopropyltriethoxysilane, followed by crosslinking with polyamic acid or polyimide. The resulting aerogels were characterized through various techniques and showed tunable properties based on the synthetic conditions and components, such as density, surface area, and mechanical strength.
This document summarizes the qualifications and experience of Kostas Dovantzis, a principal remediation engineer and project manager with over 30 years of experience in environmental consulting, waste management, and site remediation. He has managed numerous large, complex remediation projects for industrial, commercial, and government clients. Key aspects of his experience include developing innovative sampling techniques that saved clients $20 million, managing oversight of investigation, design, and construction activities worth $300 million, and successfully negotiating the scope of over 100 remediation projects internationally.
Cross-Community User Requirements and the Biodiversity Heritage LibraryChris Freeland
The document summarizes the Biodiversity Heritage Library (BHL), a global consortium of natural history libraries working to digitize biodiversity literature. It discusses BHL's partnerships, digital collections and services including OpenURL and a names lookup API. It also describes considerations for adopting cloud storage including costs, technical skills and control issues. Lessons from a DuraCloud pilot show cloud is useful for scaling but huge files are problematic and repository management requires social infrastructure. BHL aims to make over 90,000 volumes and 34 million pages freely available online while serving the needs of a broad user community.
This document provides an overview of how to find information in civil and environmental engineering. It discusses the scientific method and how it relates to information retrieval. Various formats for scientific and technical literature are described, including journals, conference proceedings, magazines, books, encyclopedias, and databases. Specific databases relevant to civil engineering are also outlined, such as Scopus, Scifinder Scholar, and those from the American Society of Civil Engineers. The document concludes with tips for developing effective search strategies and evaluating sources.
This document summarizes a report on transforming U.S. energy innovation produced by researchers at Harvard Kennedy School. It discusses the need for an energy technology revolution to address climate change and energy security challenges. The U.S. energy innovation system involves government investments in energy research and development as well as policies to drive private sector deployment of new technologies. However, private markets alone are insufficient for energy innovation due to long timescales and risks. The report evaluates U.S. energy budgets and policies and provides recommendations to improve energy technology development and deployment.
This document provides a summary of the qualifications and experience of Kostas Dovantzis. He has over 30 years of experience in environmental engineering consulting with a focus on site assessment, remediation, and litigation support. He holds a PhD in Environmental Engineering and is a licensed Professional Engineer. He has managed over 100 remediation projects and has expertise in innovative remediation technologies. His major clients include Dow, DuPont, BP, and government agencies like the EPA and Navy. He has significant experience developing cost-effective remediation strategies and achieving regulatory closure.
PROGRESS IN DEFINING THE WATER-ENERGY NEXUS: WHAT’S NEXT?U.S. Water Alliance
This presentation will showcase the Blueprint for Action, a collaborative effort between the Alliance for Water Efficiency and American Council for an Energy-Efficient Economy that spells out over 50 recommendations for needed actions in the areas of program, policy, research, and codes and standards. Since the publication of the Blueprint in May of 2011, several initiatives are now underway which will be outlined in the presentation.
Part 1 clean-water_presentation_2-22-15Eric Mcclure
The document discusses a technology for removing heavy metals and contaminants from water sources to produce clean drinking water. It notes that the technology was developed by researchers at Rice University, including Professor Andrew Barron, and has received numerous patents and awards. The technology uses a proprietary nanotube-infused quartz material to filter water and extract reclaimable metals, providing a low-cost solution for water purification that can treat a variety of contaminated water sources.
This document discusses exploring human contributions to safety in commercial aviation. It identifies strategies pilots and air traffic controllers use to perform their jobs successfully despite routine disturbances. Interviews found they anticipate issues and adapt operations, but these "positive" behaviors are not systematically captured. Flight data showed evidence of strategies like slowing descent rates to avoid speed exceedances. The assessment recommends defining safety as both preventing failures and ensuring success, and developing methods to systematically collect and analyze data on resilient performance strategies from observer reports, operator reports, and aircraft data. This could improve understanding of how humans contribute to safety to inform system design decisions.
This chapter provides an introduction to various renewable energy technologies, including solar (photovoltaic and thermal), wind, biomass, and hydropower. It describes the basic processes and components involved in harnessing energy from these sources. For each technology, the chapter discusses typical efficiencies, applications, and cost characteristics. The technologies covered can be used to generate electricity directly or to produce thermal or mechanical energy. Overall, the chapter aims to give the reader a foundational understanding of the major renewable energy options.
This document proposes a stepwise approach to conducting a water-energy-food nexus assessment. The assessment aims to understand interactions between water, energy and food systems in a given context and evaluate the performance of interventions. The assessment involves analyzing the current context, applying specific tools to quantify impacts, and assessing interventions' resource use efficiency and productivity versus context status. Key stakeholders should be engaged throughout to build consensus on strategic issues across sectors and scales. The assessment helps inform nexus-related strategies, policies, planning and institutional responses.
Leadership in Energy & Environmental Design (LEED) and other green building standards are setting a new bar for energy efficiency in the built environment. Michigan has seen it's share of highly visible success stories recently which have been driven by visionary architects, builders and property owners. Our expert panel will discuss implications for goal setting, strategies, new technologies, public policy and career opportunities.
This document profiles two lesser-known data sources for ecological and environmental data: CEED and Ecological Archives. CEED is a data repository containing peer-reviewed and non-peer-reviewed data primarily related to southern California organisms and environments. Users can search and browse metadata and download data files through FTP after registering. Ecological Archives is a public archive publishing supplemental materials to articles in Ecological Society of America journals, including data papers which are peer-reviewed compilations of datasets. It provides long-term access to these materials.
This document summarizes a media call about building a vibrant solar workforce. It discusses the Solar Ready Vets program, which trains US veterans for careers in the solar industry. The call featured representatives from the Department of Defense, military bases, community colleges, and solar companies. It provided details on existing and new Solar Ready Vets training programs located at military bases across the US. The document also summarized recent Solar Training and Education for Professionals awards totaling over $10 million that aim to expand solar training opportunities.
GBIF BIFA mentoring, Day 5a Data management, July 2016Dag Endresen
GBIF BIFA mentoring in Los Banos, Philippines for the South-East Asian ASEAN Biodiversity Heritage Parks. With Dr. Yu-Huang Wang, Dr. Po-Jen Chiang, and Guan-Shuo Mai from TaiBIF the GBIF node of Taiwan (Chinese Tapei); and the Biodiversity Informatics team at ASEAN Centre For Biodiversity. http://www.gbif.no/events/2016/gbif-bifa-mentoring.html
Credits: EUDAT/OpenAire, December 2015 & May 2016, CC-BY-4.0
* http://www.slideshare.net/EUDAT/eudat-research-data-management
* http://www.slideshare.net/EUDAT/research-data-management-introduction-eudatopen-aire-webinar?ref=https://eudat.eu/events/webinar/research-data-management-an-introductory-webinar-from-openaire-and-eudat
* https://eudat.eu/events/webinar/research-data-management-an-introductory-webinar-from-openaire-and-eudat
* http://www.instantpresenter.com/WebConference/RecordingDefault.aspx?c_psrid=EB57D6888147
AN ALGAE RESEARCH FACILITY FOR BIOFUEL AND BYPRODUCT DEVELOPMENT INTEGRATING ...Wendy Hager
This document proposes an algae research facility that integrates algae cultivation systems into the building architecture. The facility aims to develop biofuels and byproducts from algae to address issues like climate change, oil dependency, and economic growth. It will provide research spaces for scientists and produce commercial products. The proposal discusses the need for alternative fuels in the Philippines and reviews literature on worldwide algae research. It outlines goals of finding user needs, determining space requirements, and creating a state-of-the-art facility that attracts researchers. The document also discusses integrating sustainable technologies and cultivation methods into the architectural design. Site selection, analysis and programming data will be used to develop design concepts that translate the facility's goals.
Scry analytics article on data analytics outsourcing, nov. 18, 2014Shyam Sarkar
This document discusses knowledge process outsourcing (KPO) and data analytics outsourcing from India. It makes the following key points:
1) The KPO industry in India has grown rapidly but data analytics outsourcing specifically is overhyped, growing at a more modest rate of 18% annually through 2020 rather than the hype of reducing US shortages.
2) Most Indian firms focus on lower-level data management and business intelligence rather than predictive analytics, generating insights, or deep domain expertise required for complex analytics projects.
3) Seven myths are discussed around India's ability to meet demand for experienced analytics professionals and reduce shortages in the US. Reality is the Indian industry is still nascent
This document provides a summary of Rabindranath Tagore's 1930 travelogue "Russiar Chithi" (Letters from Russia) and discusses the politics of its translation into English and Russian. It notes that Tagore initially praised aspects of the Soviet system like education reform, but later criticized the repressive nature of Stalin's regime. The English translation of Tagore's work was censored by the British government due to criticisms of British colonial rule in India. Meanwhile, the Russian translation omitted Tagore's criticisms of communist excess. Overall, the document examines how the reception and circulation of Tagore's translated texts were influenced by various political powers and agendas.
This document describes a Java program that implements binary decision trees for classification. The program includes a nested BinTree class to represent nodes, with methods for building the tree by adding nodes, outputting the tree structure, and querying the tree by following yes/no branches. An example application is provided to classify animals using a decision tree that determines if an animal eats meat and has stripes.
Cancer genomics big_datascience_meetup_july_14_2014Shyam Sarkar
This document compares Java and Scala programming languages for applications in cancer genomics. It provides examples of DNA sequence alignment programs written in both Java and Scala using the BioJava open source library. It demonstrates how to create, compile, and run simple programs in both languages using the Eclipse integrated development environment. The examples calculate local alignments between DNA sequences and illustrate how core BioJava classes can be used to represent different biological sequence types and perform translations between DNA, RNA and protein sequences.
The SerialNumber class validates software serial numbers that are in the format of 5 letters, 4 digits, 5 letters separated by hyphens. The class takes a serial number string as input, splits it into the three groups, and validates each group by length and character type. Getter methods return whether the overall serial number is valid or invalid based on the group validation results.
The document discusses innovation in transaction banking. It describes how some banks are becoming more innovative in developing new solutions through cross-functional teams, external partnerships, and incubator approaches. Transaction banks are also drawing from consumer banking experiences to improve their products. Major banks like JP Morgan, Citi, Deutsche Bank, and DBS are highlighted as innovating through new payment platforms, analytics tools, and mobile applications. The future of transaction banking is said to rely on adapting quickly to meet corporate treasury needs through more agile development approaches.
This document is a report by the United Nations Educational, Scientific and Cultural Organization (UNESCO) and the United Nations Development Programme (UNDP) on the creative economy. It presents case studies and analyses of how investing in creativity and culture can generate economic opportunities and promote inclusive development at the local level. The report finds that supporting local creative industries, cultural entrepreneurship, and skills development can help open up new development pathways, especially in urban areas. It identifies critical factors for success, such as access to financing, intellectual property protection, and developing networks. The United Nations aims to be a strategic partner for local governments and communities seeking to harness their creative resources.
This document summarizes a study on Local Exchange Trading Systems (LETS) and whether they can provide benefits to small and medium enterprises during an economic crisis. It provides background on the current financial crisis and its impacts, including decreased demand, liquidity shortages, and credit constraints for small businesses. It then discusses the history and objectives of LETS, which are reciprocal credit networks that facilitate barter and local exchange using a complementary currency. The study analyzes two Italian LETS networks called Sardex.Net and Sicanex.Net to understand the services they provide and benefits they can generate for member businesses, such as increased sales, liquidity savings, and access to alternative markets.
This report examines innovative financing models for agricultural SMEs based on 100 case studies. It finds that while agricultural lending faces challenges due to farmer heterogeneity and risk, opportunities exist to expand access to financial services for farmers. The report identifies innovative models in three areas: 1) financing models that replace traditional collateral with new types of security, 2) risk mitigation models that manage risks more effectively, and 3) distribution models that lower transaction costs. These innovative models have the potential to mobilize private resources for agriculture by better addressing the needs of farmers and risks in agricultural lending.
This document discusses man's place in the universe from a philosophical perspective. It argues that evolution culminated in man, who turned physical evolution toward spiritual perfection. Man's unique ability for complex relationships and imagination allows him to realize an ideal unity with all humanity. Both the physical world and scientific truth belong to the human universe, as they can only be understood and organized by the human mind. The ultimate truth is found in human personality.
Forrester big data_predictive_analyticsShyam Sarkar
The document provides an overview of the big data predictive analytics market and solutions. It discusses how predictive analytics can help organizations reduce risks, make better decisions, and deliver personalized customer experiences by analyzing big data. The document evaluates 10 leading vendors of big data predictive analytics solutions based on their current offerings, strategies, and market presence. It finds that the ability to handle big data, easy-to-use modeling tools, and a wide choice of algorithms differentiate the leading solutions in this growing market.
The document proposes a new approach to compare stock market patterns to DNA sequences using compression techniques. Stock market data is converted to binary sequences representing increases and decreases, which are then encoded into DNA nucleotides. These nucleotide sequences are divided and matched against human genome sequences using BLAST. The analysis found certain sub-sequences of the stock market patterns matched 100% to the human genome, suggesting this approach could potentially predict stock market behavior.
1) Technology advances will soon enable sequencing a person's genome for under $1,000, exponentially increasing the number of sequenced genomes. However, this potential is limited without associating genomic data with clinical data and making it available for research.
2) A single genomic database containing inherited genomes and somatic mutations from cancer patients, along with other associated clinical and molecular data, is needed to avoid a piecemeal approach and maximize use.
3) Building such a "Million Cancer Genome Warehouse" poses technological challenges including dual clinical and research use, unified data storage and analysis, improving genomic analysis methods, streamlining data access, and ensuring privacy while enabling progress. Addressing these challenges could accelerate cancer treatment discovery.
This white paper discusses how big data and real-time analytics are important for cybersecurity. It outlines a 4-step approach: 1) collecting data from various sources, 2) integrating the data, 3) performing analytics to detect patterns and threats, 4) using HP's CORR engine to monitor data in real-time and respond quickly to threats. The paper highlights how HP's solution improves on traditional SIEM by processing more events faster using parallel processing, and enabling faster searches through a combined flat-file and relational database. This allows threats to be evaluated in real-time rather than retrospectively.
The document presents an energy scenario from Ecofys that demonstrates it is technically possible to achieve almost 100% renewable energy by 2050. This scenario raises significant challenges around energy conservation, electrification, equity, land and sea use, lifestyle, finance, and innovation that must be addressed. Making the transition to 100% renewable energy by 2050 is one of the most important tasks to ensure energy for future generations in a sustainable way.
This document discusses how analyzing large amounts of data from mobile phone usage can provide insights to help address challenges in international development. Specifically, patterns in mobile money transactions, call records, social media posts and other digital activities can help governments and organizations better understand public needs, predict crises, and target services. However, privacy concerns and lack of data sharing incentives currently limit these benefits. The document outlines opportunities and obstacles to establishing a "data commons" where information is openly and responsibly shared between public, private and nonprofit sectors for social good.
This document provides an overview of jobs and discusses different words used in various languages to describe jobs. It notes that jobs can be characterized in multiple ways, such as by the skills required, physical effort involved, number of people engaged, or contractual relationships. Words related to jobs do not always directly translate between languages since different societies may emphasize different aspects of jobs. The document also discusses how job-related words are sometimes used as family names or personal identifiers. It concludes that jobs are an important part of people's identities and that languages convey jobs as more than just a way to earn income but as part of who someone is.
This document discusses sustainable business and green technology. It highlights how stronger political will is needed to meet environmental goals through collaboration between governments, businesses, and NGOs. It also discusses how cement production is moving towards more sustainable practices by using industrial waste as fuel and replacing clinker, reducing emissions. Incubators are bringing different sectors together to drive clean technology innovation through partnerships and community building.
Portfolio investment opportuities in indiaShyam Sarkar
The national emblem of India depicts three lions standing back to back mounted on an abacus with carvings of an elephant, horse, bull, and lion, separated by wheels, representing strength and courage. It is an adaptation of the Ashoka Lion Capital at Sarnath. The words 'Satyameva Jayate' meaning 'Truth Alone Triumphs' are inscribed below. The emblem was adopted on January 26, 1950."
The document announces an upcoming North American Bengali Conference to be held in Las Vegas over 3 days in July 2012, featuring performances from famous Indian singers and artists as well as programs on Rabindra Sangeet, Baul music, dance, classical music, drama, and Bangla rock bands. Headlining musicians include Sankar Mahadevan, Kavita Krishnamurthy, Rupankar Bagchi, and Pandit Jasraj, while dances will be performed by Gurukul and Arpita Chatterjee. Literary figures like Swapnomoy Chakraborty and plays like Byomkesh will
1. NASA/TM—2009-215587
Biofuels as an Alternative Energy Source for
Aviation—A Survey
Bilal M. McDowell Bomani, Dan L. Bulzan, Diana I. Centeno-Gomez, and Robert C. Hendricks
Glenn Research Center, Cleveland, Ohio
December 2009
2. NASA STI Program . . . in Profile
Since its founding, NASA has been dedicated to the • CONFERENCE PUBLICATION. Collected
advancement of aeronautics and space science. The papers from scientific and technical
NASA Scientific and Technical Information (STI) conferences, symposia, seminars, or other
program plays a key part in helping NASA maintain meetings sponsored or cosponsored by NASA.
this important role.
• SPECIAL PUBLICATION. Scientific,
The NASA STI Program operates under the auspices technical, or historical information from
of the Agency Chief Information Officer. It collects, NASA programs, projects, and missions, often
organizes, provides for archiving, and disseminates concerned with subjects having substantial
NASA’s STI. The NASA STI program provides access public interest.
to the NASA Aeronautics and Space Database and
its public interface, the NASA Technical Reports • TECHNICAL TRANSLATION. English-
Server, thus providing one of the largest collections language translations of foreign scientific and
of aeronautical and space science STI in the world. technical material pertinent to NASA’s mission.
Results are published in both non-NASA channels
and by NASA in the NASA STI Report Series, which Specialized services also include creating custom
includes the following report types: thesauri, building customized databases, organizing
and publishing research results.
• TECHNICAL PUBLICATION. Reports of
completed research or a major significant phase For more information about the NASA STI
of research that present the results of NASA program, see the following:
programs and include extensive data or theoretical
analysis. Includes compilations of significant • Access the NASA STI program home page at
scientific and technical data and information http://www.sti.nasa.gov
deemed to be of continuing reference value.
NASA counterpart of peer-reviewed formal • E-mail your question via the Internet to help@
professional papers but has less stringent sti.nasa.gov
limitations on manuscript length and extent of
graphic presentations. • Fax your question to the NASA STI Help Desk
at 443–757–5803
• TECHNICAL MEMORANDUM. Scientific
and technical findings that are preliminary or • Telephone the NASA STI Help Desk at
of specialized interest, e.g., quick release 443–757–5802
reports, working papers, and bibliographies that
contain minimal annotation. Does not contain • Write to:
extensive analysis. NASA Center for AeroSpace Information (CASI)
7115 Standard Drive
• CONTRACTOR REPORT. Scientific and Hanover, MD 21076–1320
technical findings by NASA-sponsored
contractors and grantees.
3. NASA/TM—2009-215587
Biofuels as an Alternative Energy Source for
Aviation—A Survey
Bilal M. McDowell Bomani, Dan L. Bulzan, Diana I. Centeno-Gomez, and Robert C. Hendricks
Glenn Research Center, Cleveland, Ohio
National Aeronautics and
Space Administration
Glenn Research Center
Cleveland, Ohio 44135
December 2009
4. This work was sponsored by the Fundamental Aeronautics Program
at the NASA Glenn Research Center.
Level of Review: This material has been technically reviewed by technical management.
Available from
NASA Center for Aerospace Information National Technical Information Service
7115 Standard Drive 5285 Port Royal Road
Hanover, MD 21076–1320 Springfield, VA 22161
Available electronically at http://gltrs.grc.nasa.gov
5. Biofuels as an Alternative Energy Source for Aviation—A Survey
Bilal M. McDowell Bomani, Dan L. Bulzan, Diana I. Centeno-Gomez, and Robert C. Hendricks
National Aeronautics and Space Administration
Glenn Research Center
Cleveland, Ohio 44135
Abstract
The use of biofuels has been gaining in popularity over the past few years because of their ability to
reduce the dependence on fossil fuels. As a renewable energy source, biofuels can be a viable option for
sustaining long-term energy needs if they are managed efficiently. We investigate past, present, and
possible future biofuel alternatives currently being researched and applied around the world. More
specifically, we investigate the use of ethanol, cellulosic ethanol, biodiesel (palm oil, algae, and
halophytes), and synthetic fuel blends that can potentially be used as fuels for aviation and nonaerospace
applications. We also investigate the processing of biomass via gasification, hydrolysis, and anaerobic
digestion as a way to extract fuel oil from alternative biofuels sources.
1.0 Introduction
There is worldwide interest in biofuels as a renewable energy source for long-term fuel sustainability
because of the predictable depletion of fossil fuels. The world is increasingly accepting the fact that
conventional sources of fuel and energy are being rapidly depleted and cannot be renewed. Unlike other
renewable energy sources, biomass is a fully renewable resource that can and is used for biofuels, power,
chemicals, materials, and other products, and generates virtually no net greenhouse gas. What is needed is
a safe, reliable, and efficient method of generating renewable biofuels that can potentially replace or
mitigate fossil fuel dependence. We present an overview of the use of several biofuels as well as their
advantages, disadvantages, and potential applications within the aviation industry.
While fossil fuels have their origin in ancient biomass, they are not considered biomass by the
generally accepted definition because they contain carbon that has been “out” of the carbon cycle for a
very long time. Their combustion therefore disturbs the carbon dioxide content in the atmosphere (Ref. 1).
Biomass generally refers to any plant, plant-derived material, or biodegradable waste material that
can be used for fuel or industrial production. It does not include such organic material as coal or
petroleum and is usually measured by dry weight. Biomass is grown from several plant types including
but not limited to corn, poplar, perennial grasses, willow, and sugarcane. Biomass can be converted
directly into liquid fuels or biofuels for use as an alternative fuel in cars, trucks, buses, aircraft, and trains.
Ethanol and biodiesel are the two most common types of biofuel currently being used as alternative fuel
sources today.
Bockris (Ref. 2) predicts that Hubbert’s Peak (the peak of the entire planet’s oil production) will be
reached by 2011 and the world economy will be threatened by energy starvation. Demirbas (Ref. 3)
reviewed the modern biomass-based transportation fuels such as fuels from Fischer-Tropsch synthesis,
bioethanol, fatty acid (m)ethylester, biomethanol, and biohydrogen. Bockris and Demirbas present the
basic concepts involved in the thermochemical conversions of biomass fuels and conclude that the
reduction of greenhouse-gas pollution during its processing is the main advantage of utilizing biomass
energy.
Watkins (Ref. 4) explored how countries are switching to biofuels instead of relying on oil and
natural gas. Indonesia, a member of the Organization of Petroleum Exporting Countries, is planning to
operate biofuel-fired power plants in 2007. The plants would use palm oil as their main energy source.
Malaysia is forecast to export 1 million tons of biofuel next year.
NASA/TM—2009-215587 1
6. 2.0 Types of Biofuels
2.1 Ethanol
Ethanol is an alcohol-based alternative fuel produced by fermenting and distilling starch crops that
have been converted into simple sugars. Ethanol has been used as fuel in the United States since at least
1908. Primary feedstocks for this fuel include corn, barley, and wheat. Ethanol can also be made from
other products such as grain sorghum (milo), sugar cane, beets, cheese whey, and potatoes. Ethanol is by
far the most popular biofuel in use today in the United States of America. It is a high-octane, clean-
burning, and renewable fuel. Ethanol is produced at more than 100 facilities across the Nation, most in the
Midwest, and then blended into unleaded gasoline in varying percentages. Ethanol is most commonly
retailed as E10, the 10 percent blend of ethanol for use in all automobiles. It is also available as E85, the
85 percent ethanol blend for use in flexible fuel vehicles.
Corn, the predominant ethanol feedstock, is converted to ethanol in either a dry or wet milling
process. In dry milling operations, liquefied corn starch is produced by heating corn meal with water and
enzymes. A second enzyme converts the liquefied starch to sugars, which are fermented by yeast into
ethanol and carbon dioxide. Wet milling operations separate the fiber, germ (oil), and protein from the
starch before it is fermented into ethanol.
With few exceptions, corn is the primary feedstock for U.S. ethanol production. In the United States,
over 95 percent of all ethanol produced comes from corn feedstock.
The production of ethanol from corn is a mature technology that is not likely to see significant
reductions in production costs. Substantial cost reductions may be possible if cellulose-based feedstocks
(discussed below) are used instead of corn (Ref. 5). The ability to produce ethanol from low-cost biomass
will be key to making ethanol competitive with gasoline.
In 2004, 3.4 billion gal of ethanol were produced in the Nation, up from 2.81 billion gal the previous
year. By the end of 2005, the ethanol industry reached a capacity of more than 4 billion gal. By the end of
2006, the total capacity reached nearly 5.5 billion gal (Ref. 6). Ethanol producers were predicted to
produce the equivalent of 3 percent of U.S. gasoline consumption in 2006.
Concerns are being raised (Ref. 7) on the amount of energy required to grow and convert corn or
biomass into ethanol. It is also expected that corn prices will increase significantly and people around the
world will suffer as corn-based products become more expensive. Corn prices are increasing because of
increasing demand for water to sustain the corn-based crops and the production of ethanol, leading to an
increase in the prices of cattle, hogs, poultry, meat, milk, and cheese in the country.
Based on the findings of (Ref. 8), ethanol production using corn grain required 29 percent more fossil
energy than the ethanol fuel produced. Ethanol production using switchgrass required 50 percent more
fossil energy than the ethanol fuel produced. Ethanol production using wood biomass required 57 percent
more fossil energy than the ethanol fuel produced. Biodiesel production using soybean oil required
27 percent more fossil energy than the biodiesel fuel produced. Biodiesel production using sunflower oil
required 118 percent more fossil energy than the biodiesel fuel produced.
Ethanol has enjoyed some success as a renewable fuel, primarily as a gasoline volume extender and
also as an oxygenate for high-oxygen fuels. A large part of its success has been the Federal ethanol
subsidy. However, the U.S. Government ethanol subsidy has expired in 2008, and it is not clear whether
ethanol will continue to receive Government support. The lack of Government support might affect
ethanol’s ability to compete against crude oil.
Ethanol costs could be reduced dramatically if efforts to produce ethanol from biomass are successful.
Biomass feedstocks, including forest residue (wood chips) and agricultural residue (straw, compost, and
prairie grass), are abundant and relatively inexpensive, and they are expected to lower the cost of
producing ethanol and provide stability to supply and price.
An energy production investigation (Ref. 9) concluded that ethanol production from corn wastes
energy and requires a total input of 140 gal of fossil fuels and costs $347 per acre. The conversion of the
feedstock into ethanol requires additional energy for the distillation, which concentrates the dilute alcohol
NASA/TM—2009-215587 2
7. solution from the fermented broth into fuel ethanol. The conversion requires 131 000 Btu of energy per
gallon of ethanol. A gallon of ethanol has an energy value of 77 000 Btu, and therefore the energy loss is
54 000 Btu/gal of ethanol. The investigation concluded that the United States needs its cropland to
produce food and not motor fuel. In addition, the feasibility of replacing any fossil fuel with biomass
awaits improved technology.
In contrast, Shapouri et al. (Ref. 10) estimated the net energy balance of corn ethanol utilizing the
latest survey of U.S. corn producers and the 2001 U.S. survey of ethanol plants. The major objectives of
this report were to improve the quality of data and methodology used in the estimation. These results
indicate that corn ethanol has a positive energy balance, even before subtracting the energy allocated to
producing byproducts. The net energy balance of corn ethanol adjusted for byproduct credits is 27 729
and 33 196 Btu/gal for wet and dry milling, respectively, and
30 528 Btu/gal for the industry. The study results suggest that corn ethanol is energy efficient, as
indicated by an energy output/input ratio of 1.67.
Since conventional ethanol relies on simple sugars, it works best when derived from crops that
concentrate starches in their seeds. That is why corn makes a better feedstock than wheat, and sugarcane
makes a better feedstock than corn. But the same quality also limits conventional ethanol’s efficiency
when it comes to mass production since it can only use a relatively small portion of each plant and hence,
a lot of biomass goes unused in the process.
Ethanol is commonly used in transportation and agriculture to fuel internal combustion engines. It is
typically used as a direct replacement for gasoline or blended with gasoline as an extender and octane
booster. One major disadvantage to using ethanol is that vehicle distance is limited by the availability and
distribution of ethanol. In addition, ethanol does not ignite under compression and does not mix well with
diesel fuel, which limits its use for unmodified aircraft engines. To this end, a recent trend is the use of
cellulosic ethanol, which is discussed in the following section.
2.2 Cellulosic Ethanol
Cellulosic ethanol, also called cellanol, is ethanol fuel produced from cellulose. Cellulose is a
naturally occurring complex carbohydrate polymer commonly found in plant cell walls. Cellulosic
ethanol is chemically identical to ethanol from other sources such as corn or sugar but is available in a
great diversity of biomass including waste from urban, agricultural, and forestry sources. Processing
cellulosic ethanol differs from ethanol because it requires an extra step called cellulolysis, or the breaking
down of cellulose into sugars. It is more difficult to break down cellulose to convert it into usable sugars
for ethanol production. However, making ethanol from cellulose dramatically expands the types and
amount of available material for ethanol production.
There are at least two cellulosic production methods: the cellulolysis method, which is hydrolysis
followed by fermentation of the generated free sugars, and gasification, which is sometimes called
systhesis gas fermentation or catalysis (e.g., the Fischer-Tropsch process). It should be noted that neither
process generates toxic emissions when it produces ethanol.
Cellulosic ethanol and conventional, grain-based ethanol have identical molecules, but they differ in
that conventional fuel ethanol is derived from only a small fraction of biomass feedstock, the edible parts
of corn or other feed grains, while cellulose ethanol is made from the nonfood portion of renewable
feedstocks, such as cereal straws and corn stover (leaves and stems), or other energy crops. Although the
refining process for cellulosic ethanol is more complex than that of corn-based ethanol, cellulosic ethanol
yields a greater net energy benefit and results in much lower greenhouse-gas emissions.
Cellulosic ethanol can be produced from a wide variety of cellulosic biomass feedstocks including but
not limited to agricultural residues (rice, corn stover, and wheat straw), agricultural wastes (sugar cane,
bagasse waste, rice husks, and citrus pulp), forestry and wood wastes (including willow and poplar),
municipal solid waste (including paper pulp and saw dust), and energy crops (switchgrass).
NASA/TM—2009-215587 3
8. Cellulosic biomass is composed of cellulose, hemicellulose, and lignin, with smaller amounts of
proteins, lipids (fats, waxes, and oils), and ash. Roughly, two-thirds of the dry mass of cellulosic materials
are present as cellulose and hemicellulose. Lignin makes up the bulk of the remaining dry mass.
As with grains, processing cellulosic biomass aims to extract fermentable sugars from the feedstock.
The sugars in cellulose and hemicellulose are locked in complex carbohydrates called polysaccharides
(long chains of monosaccharides or simple sugars). Separating these complex polymeric structures into
fermentable sugars is essential for the efficient and economic production of cellulosic ethanol.
Cellulosic ethanol is attractive because the feedstock is cheap and abundant. Converting it into
ethanol requires less fossil fuel, so it can have a bigger impact than corn ethanol on reducing greenhouse-
gas emissions. Also, an acre of grasses or other crops grown specifically to make ethanol could produce
more than two times the number of gallons of ethanol as an acre of corn, in part because the whole plant
can be used instead of just the grain (Ref. 11). Many experts estimate that corn-ethanol producers will run
out of land, in part because of competing demand for corn-based food, limiting the total production to
about 15 billion gal of fuel. Corn-ethanol plants, both existing and planned, have a capacity of about
11 billion gal.
According to the U.S. Department of Energy, corn-based ethanol provides 26 percent more energy
than is required for its production, while cellulosic provides 80 percent more energy. While conventional
ethanol reduces greenhouse-gas emissions 10 to 20 percent below gasoline levels, the reductions with
cellulosic range from 80 percent below gasoline to completely carbon dioxide neutral. Table I lists
advantages and disadvantages of various cellulose feedstocks. Figure 1 shows an ethanol production
process.
There are several advantages of cellulosic ethanol over conventional ethanol, and with continued
research cellulosic ethanol may have a significant impact in biofuels research as a renewable energy
source.
2.3 Biodiesel
Biodiesel refers to any clean-burning alternative fuel produced from domestic, renewable resources.
Biodiesel contains no petroleum, but it can be blended at any level with petroleum diesel to create a
biodiesel blend. It can be used in compression-ignition (diesel) engines with little or no modifications.
Biodiesel is simple to use, biodegradable, nontoxic, and essentially free of sulfur and aromatics.
Biodiesel is made through a chemical process called transesterification, where the glycerin is
separated from the fat or vegetable oil. The process leaves behind two products: methyl esters (the
chemical name for biodiesel) and glycerin (a valuable byproduct usually sold to be used in soaps and
other products). Fuel-grade biodiesel must be produced to strict industry specifications (Ref. 13) in order
to ensure proper performance. In the United States, biodiesel is the only alternative fuel to have fully
completed the health effects testing requirements of the 1990 Clean Air Act Amendments. Biodiesel that
meets ASTM D6751 and is legally registered with the Environmental Protection Agency is a legal motor
fuel that can be sold and distributed.
Typically, biodiesel refers to a diesel-equivalent, processed fuel derived from biological sources
(primarily vegetable oils), which can be used in an unmodified diesel engine. It has physical properties
very similar to conventional diesel (Table II). Biodiesel can be produced by a variety of esterification
technologies. The oils and fats are filtered and preprocessed to remove water and contaminants. If free
fatty acids are present, they can be removed or transformed into biodiesel using special pretreatment
technologies. The pretreated oils and fats are then mixed with an alcohol (usually methanol) and a catalyst
(usually sodium hydroxide). The oil molecules (triglycerides) are broken apart and reformed into
methylesters and glycerol, which are then separated from each other and purified.
NASA/TM—2009-215587 4
9. TABLE I.—ADVANTAGES AND DISADVANTAGES OF VARIOUS CELLULOSE FEEDSTOCKS
[From Ref. 12.]
Cellulose feedstocks Advantages Disadvantages
Agricultural residues Probably less costly than most forest residue. Existing harvest equipment and storage
(rice, corn stover, and It is renewable. systems are immature. For example,
wheat straw) New source of revenue (farmers and rural combines are designed to pluck an ear of
preprocessing industries that may spring up corn and leave the rest of the corn plant
to handle material). in the field. A new machine is needed to
Currently, agricultural waste is composted, harvest the corn stalk, in addition to the
plowed back into the soil, thrown away, or corn kernels.
burned. The current high costs for recovering most
Potentially higher yields per acre than corn. agricultural residues contribute to
Potential market for animal feed. preventing their wide use for energy
purposes (still more expensive than
harvesting corn).
Wood fibers Widely used source of renewable energy— Wood chips could become too expensive to
(forestry and wood 44 percent of the total (in United States). compete.
wastes) Substantial source of renewable energy. In There are competing demands for wood
year 2030, more than 7 percent of the fiber that may drive prices up.
country’s energy needs could be met by
woody biomass resources.
Current infrastructure and natural resources
already exist.
Reduces sulfur dioxide and nitrogen dioxide
in biomass processing versus coal or oil.
Use of forest waste helps decrease fire
hazards associated with dead wood.
Energy crops Native to North America. These are perennials that will take 2 to
(switch grass and Requires little water or fertilizer to grow. It 3 years to get to a full yield.
miscanthus) comes back year after year without planting. Enzymes needed to break down the
Thrives in places unsuitable for most crops. cellulose are expensive. Department of
Yields twice as much ethanol per acre than Energy and private investors are working
corn. diligently to solve this problem.
Switchgrass is a “captive energy source.” It
has no competing use other than energy.
Switchgrass helps prevent soil erosion.
Broad range of adaptability to poorer soils
and drought tolerance, which would allow
energy crops to be grown in regions that
cannot support large-scale food crop
production.
Municipal waste Provides a local solution to waste Converting compostable waste to ethanol
accumulation by allowing managers to may divert efforts for recycling paper
dispose of materials with a 30 to 50 mile products. Ideally, however, ethanol
radius of their generation point. production from MSW will only add to
Disposal is safe and permanent, requiring no the percentage of garbage reused rather
burning. than draw away from the material that is
Producing fuel from municipal solid waste currently recycled.
(MSW) provides a viable solution to
multiple environmental problems.
Establishing MSW-to-ethanol plants in rural
communities directly improves economic
welfare by creating hundreds of
construction jobs and permanent operational
positions.
NASA/TM—2009-215587 5
10. TABLE II.—PHYSICAL PROPERTIES OF
BIODIESEL
[From Ref. 14.]
Specific gravity .................................. 0.87 to 0.89
Kinematic viscosity at 40 °C .................. 3.7 to 5.8
Cetane number ......................................... 46 to 70
Higher heating value, Btu/lb ...... 16 928 to 17 996
Sulfur, wt% ......................................... 0 to 0.0024
Cloud point, °C ...................................... –11 to 16
Pour point, °C......................................... –15 to 13
Iodine number ........................................ 60 to 135
Lower heating value, Btu/lb ....... 15 700 to 16 735
According to Hill et al. (Ref. 15), biodiesel production is highly efficient, generating 93 percent more
energy than is required to make it. They also found that biodiesel reduces greenhouse-gas emissions by
41 percent compared with fossil fuels.
Biodiesel is almost always mixed with conventional diesel by fuel distributors because of its higher
cost, engine compatibility issues, and cold weather operation concerns. The most common blends are B2,
B5, and B20 (2, 5, and 20 percent biodiesel, respectively). Pure 100 percent biodiesel (B100) can also be
used unblended as a fuel in some diesel engines. The environmental benefits of using biodiesel scales
with the percent of biodiesel contained in the blend. B20 can be more broadly applied to existing engines
with little or no modification.
Biodiesel feedstock plants utilize photosynthesis to convert solar energy into chemical energy. The
stored chemical energy is released when it is burned, therefore plants can offer a sustainable oil source for
biodiesel production. Using biodiesel in a conventional diesel engine substantially reduces emissions of
NASA/TM—2009-215587 6
11. unburned hydrocarbons, carbon monoxide, sulfates, polycyclic aromatic hydrocarbons, nitrated
polycyclic aromatic hydrocarbons, and particulate matter. Most of the carbon dioxide emitted when
burning biodiesel is simply recycling what was absorbed during plant growth, so the net production of
greenhouse gases is small. Biodiesel typically produces about 60 percent less net CO2 emissions than
petroleum-based diesel fuel since it is produced from atmospheric carbon dioxide via photosynthesis in
plants. There are a variety of oils that can be used to produce biodiesel such as rapeseed and soybean oil,
which account for approximately 90 percent of all fuel stocks. Other crops include mustard, flax,
sunflower, canola, palm oil, hemp, jatropha, and algae. Waste vegetable oil, animal fats (tallow, lard,
yellow grease, chicken fat, and fish oil), and sewage are also used for biodiesel production. Thermal
depolymerization, a new process that reduces almost any hydrocarbon-based feedstock, including non-oil-
based feedstocks into light crude oil can be used to produce biodiesel.
Worldwide production of vegetable oil and animal fat is not yet sufficient to replace liquid fossil fuel
use. According to the U.S. Environmental Protection Agency, restaurants in the United States produce
about 300 million U.S. gal (0.001 km³) of waste cooking oil annually. The estimated transportation fuel
and home heating oil used in the United States is about 230 billion U.S. gal (0.87 km³) (Ref. 16). Waste
vegetable oil and animal fats would not be enough to meet this demand. In the United States, estimated
production of vegetable oil for all uses is about 24 billion lb (11 million tons) or 3 billion U.S. gal (0.011
km³). The estimated production of animal fat is 12 billion lb (5.3 million tons).
The use of biodiesel decreases the solid carbon fraction of particulate matter (since the oxygen in
biodiesel enables more complete combustion to carbon dioxide) and reduces the sulfate fraction (biodiesel
contains less than 15 ppm sulfur), while the soluble, or hydrocarbon, fraction stays the same or increases.
Therefore, biodiesel works well with emission control technologies such as diesel oxidation catalysts
(which reduce the soluble fraction of diesel particulate but not the solid carbon fraction).
Emissions of nitrogen oxides increase with the concentration of biodiesel in the fuel and the increase
is roughly 2 percent for B20. Some biodiesel produces more nitrogen oxides than others, and some
additives have shown promise in reducing the increases. One disadvantage of using biodiesel for the
aviation industry is its freezing point. Biodiesel from corn feedstock, vegetable oil, and animal fats
freezes at –20 F, which is well above typical fuel temperatures used in jet airplanes. Other disadvantages
to using biodiesel are its cloud point, gel point, and thermal stability. Fuel storage is also a major concern
since biodiesel degrades sufficiently over time in storage.
2.3.1 Biodiesel From Palm Oil
The palm fruit is the source of both palm oil (extracted from palm fruit) and palm kernel oil
(extracted from the fruit seeds). Palm oil contains a high amount of beta-carotene and is used as cooking
oil, making margarine, as well as a component (edible vegetable oil) of many processed foods. Palm oil is
a form of edible vegetable oil obtained from the fruit of the palm tree. According to the U.S. Department
of Agriculture (Ref. 17) 28 million metric tons of palm oil were produced worldwide in 2004, and it is on
pace to surpass soybean oil as the most widely produced vegetable oil in the world.
Demand for palm oil is rising and is expected to climb further, particularly for use as a biodiesel fuel.
The demand for palm oil usage is forecast to double by 2020 (Ref. 18). To achieve that production
increase, 1160 new square miles will have to be planted every year for 20 years. Malaysia, where the
palm tree has been grown since the 1870s, and Indonesia account for 85 percent of the world’s production
of palm oil. Indonesia has 26 300 square miles of forest land officially allocated for new palm oil
plantations while Malaysia has almost 3000 square miles more than that. The expected thousands of
square miles of new plantings on the islands of Sumatra and Borneo have the potential to eliminate the
remaining orangutans, rhinos, and tigers. The environmental impact of the growth and further
development of palm oil plantations is a serious threat that cannot be accurately predicted because of the
amount of political pressure on palm oil countries.
An independent study commissioned by the Malaysian government in 2006 has shown that palm oil
requires an input of only 30 to 40 percent of fossil fuel energy to produce a given amount of energy
NASA/TM—2009-215587 7
12. compared with an input of up to 60 percent fossil fuel energy in the process of making biofuels from
maize, rapeseed, or soybeans.
2.3.2 Biodiesel From Algae
While a number of biofeedstocks are currently being used for ethanol and biodiesel production, algae
has emerged as one of the most promising sources—especially for biodiesel. The yields of oil from algae
are orders of magnitude higher than those for traditional oilseeds. As a comparison, a single acre of algae
ponds can produce 15 000 gal of biodiesel, an acre of soybeans produces up to 50 gal of biodiesel per
acre, an acre of jatropha produces up to 200 gal per acre, coconuts produce just under 300 gal per acre,
and palm oil produces up to 650 gal of biodiesel per acre (Ref. 16). Table III lists the gallons of oil per
acre per year for corn, soybeans, safflower, sunflower, rapeseed, palm oil, and microalgae.
TABLE III.—ANNUAL YIELDS OF
OIL PER ACRE OF VARIOUS
BIOFUEL FEEDSTOCKS
[From Refs. 16 and 19.]
Feedstock Yield,
gal
Corn 18
Soybeans 48 to 50
Safflower 83
Sunflower 102
Rapeseed 127
Jatropha 200
Coconut 300
Palm 635
Microalgae 5000 to 15 000
Algae can be grown in sewage and next to power-plant smokestacks, where they digest pollutants.
Although research into algal oil as a source for biodiesel is not new, the current oil crisis and fast
depleting fossil oil reserves have made it more imperative for organizations and countries to invest more
time and efforts into research on suitable renewable feedstock such as algae. Berzin (Ref. 20) has
developed a method of capturing carbon dioxide from smokestack emissions using algae and turning the
result into biodiesel, ethanol, and even a coal substitute. His process, based on technology he developed
for NASA in the late 1990s, captures more than 40 percent of emitted CO2 (on sunny days, up to
80 percent) along with over 80 percent of NOx emissions. In turn, it produces biodiesel at rates per acre
that could make a full conversion to biofuel for transportation readily achievable. Berzin calculates that
just one 1000-MW power plant using his system could produce more than 40 million gal of biodiesel and
50 million gal of ethanol per year.
Bullock (Ref. 21) conducted a 6-month test in a small plant to demonstrate GreenFuel Technologies
Corporation’s process that uses microalgae in a photobioreactor to sequester carbon dioxide from furnace
gases. The pilot plant used gases from the Hazelwood Power Station, an Australian brown-coal-fired
electric power plant, in tubular photobioreactors to grow microalgae.
According to the U.S. Department of Energy, most current research into efficient algal-oil production
is being done in the private sector. The per unit area yield of oil from algae is estimated to be from 5000
to 20 000 gallons per acre, per year; which is 7 to 31 times greater than the next best crop, palm oil
(635 gal).
Algal oil can be processed into biodiesel as easily as oil derived from land-based crops. The
difficulties in efficient biodiesel production from algae lie not in the extraction of the oil, but in finding an
algae strain with a significant lipid content and fast growth rate that is not too difficult to harvest. Open-
pond systems have not been considered feasible for the cultivation of algae with high oil content. This is
due to the algae not being able to withstand wide variations in temperature and pH as well as competition
from invasive algae and bacteria. Algae species with lower oil content, not having to divert their energies
away from growth, have an easier time in the harsher conditions of an open system.
NASA/TM—2009-215587 8
13. Research into algae for the mass production of oil is mainly focused on microalgae capable of
photosynthesis that are less than 2 mm in diameter as opposed to macroalgae (seaweed). This preference
towards microalgae is due largely to its less complex structure, fast growth rate, and high oil content (for
some species). Some commercial interests into large-scale algae-cultivation systems are looking to tie into
existing infrastructures, such as coal power plants or sewage treatment facilities. This approach not only
provides the raw materials for the system, such as carbon dioxide and nutrients, but it changes those
wastes into resources.
2.3.3 Biodiesel From Halophytes
By definition, a halophyte is any plant, especially a seed plant, that is able to grow in habitats
excessively rich in salts, such as salt marshes, sea coasts, saline or alkaline semi-deserts, and steppes.
These plants have special physiological adaptations that enable them to absorb water from soils and from
seawater, which have solute concentrations that nonhalophytes could not tolerate. Some halophytes are
actually succulents, with a high water-storage capacity (Ref. 22). Less than 2 percent of plant species are
halophytes. The majority of plant species are glycophytes, which are damaged easily by salinity (Ref. 23).
Naturally occurring saline environments in the Middle East provided necessary selection pressure for
the evolution of highly salt-tolerant plants, to primarily be used for grazing. Approximately 211
halophytic species from 29 plant families are recorded in the Middle East; in comparison, the world flora
lists some 885 species of halophytic angiosperms from 250 genera. Indigenous and exotic halophytes
constitute an untapped genetic resource that can be used in developing crops under saline conditions.
These wild plants, if domesticated, can utilize saline water and soil resources for sustainable agricultural
production. Their seeds, fruits, roots, tubers, or foliage can be used directly or indirectly as human food.
A minimum of 50 species of seed-bearing halophytes are potential sources of grain and oil; these
include halophytes with seed quality comparable to, or better than, that of wheat and species with seeds
that are rich in energy, protein, and fat content. Other halophytes are candidates as tuber-, vegetable-, or
fodder-producing crops. A number of fruit-producing halophytes can be used as rootstocks or grafts to
produce economic fruit yields using saline water and soil resources. Salt-tolerant trees and shrubs
constitute a rich source of energy known as fuelwood. In addition, genetic resources have been identified
among the halophytes as sources for pulp, fiber, gums, oils, resins, bioactive derivatives, and as landscape
and ornamental plants.
One of the most important contributions of halophytes towards sustainable farming systems in the
Middle East is their potential as fodder grasses, legumes, shrubs, and trees. Long-term sustainability of
farming systems based on these halophytes depends on the economic value of inputs and outputs, their
environmental impact, future food needs, economics, the extent to which freshwater ecosystems are
withheld from further agricultural development, and development of agronomic practices appropriate for
new farming systems (Ref. 24).
Glenn et al. (Ref. 25) have tested the feasibility of using seawater agriculture to grow halophytes and
found that it works well in desert or sandy soil environments. The most promising halophyte they have
found thus far is Salicornia bigelovii, which is a leafless salt-marsh plant that colonized new areas of mud
flat. Their seeds contain 30 percent oil and 35 percent protein (very similar to other oilseed crops) and the
salt content is less than 3 percent.
Yensen (Ref. 22) believes that most new halophyte crops will be used inland based on the fact that
most halophytes have significantly increased productivity at lower salinities. There is more than 300
times as much land already salinized and many inland areas already have canals, fields, farms, and
infrastructure as well as people needing food, but have no crops. New halophyte crops such as NyPa
Forage and NyPa Grain (NyPa Australia Ltd.) have the potential for utilizing salt-ruined land, stabilizing
soil from wind and water erosion, providing pasturage, and helping less advantaged populations to feed
themselves.
A number of halophytes have already been utilized by indigenous populations along maritime
coastlines who understood how to make use of many plants growing in mangroves and saltmarshes. The
plants were used from the places where they grew naturally. These places include areas where tidal action
NASA/TM—2009-215587 9
14. washes seawater over land and in delta areas where seawater and river water clash together and create
large, fertile marsh areas. This is where halophyte farming can be extremely beneficial.
Halophytes are gaining in popularity today because of the steady increase of the salinity in irrigation
systems in Mediterranean and subtropical desert countries where the increasing population reaches the
limits of freshwater availability. One of the most urgent global problems is finding enough water and land
to support the world’s food needs. The United Nations Food and Agriculture Organization estimates that
an additional 200 million hectares (494.2 million acres) of new cropland will be needed over the next
30 years just to feed the burgeoning populations of the tropics and subtropics. However, only 93 million
hectares are available in these nations for farms to expand but much of that land is forested, which poses
an environmental concern.
2.4 Synthetic Fuel
Synthetic fuel (synfuel) is any liquid fuel obtained from coal, natural gas, or biomass. It can
sometimes refer to fuels derived from other solids such as oil shale, tar sane, or waste from plastics.
Depending on the initial feedstock, the process of producing synfuel can be referred to as coal-to-liquids,
gas-to-liquids, or biomass-to-liquids. The most common process is the Fischer-Tropsch systhesis, which
was used on a large scale in Germany during World War II. An intermediate step in the production of
synthetic fuel is often syngas, which is a stoichiometric mixture of carbon monoxide and hydrogen and is
sometimes directly used as an industrial fuel.
Sasol, a South-African-based company, is the leading company in the commercialization of synthetic
fuel. They currently operate the world’s only commercial coal-to-liquids facility at Secunda, with a
capacity of 150 000 barrels a day (Ref. 26). Other companies that have developed coal-to-liquids or gas-
to-liquids processes include Shell, Exxon, Statoil, Rentech, and Syntroleum. Worldwide commercial gas-
to-liquids plant capacity is 60 000 barrels per day (Ref. 27) including plants in South Africa, Malaysia,
and New Zealand.
The U.S. Department of Energy projects that domestic consumption of synthetic fuel made from coal
and natural gas will rise to 3.7 million barrels per day in 2030 based on a price of $57 per barrel of high-
sulfur crude (Ref. 27). For synthetic fuels to be competitive with petroleum-based fuels without
Government subsidies, crude oil would have to be at a relatively high price. They offer the potential to
supplement or replace petroleum-based fuels if oil prices continue to rise or stay above a cost of $100 per
barrel for the long term. Synthetic fuels are primarily produced in the United States because of
government subsides but are a proven technology that can offer the potential to solve the energy crises
due to the depletion of crude oil.
3.0 Processing of Biomass
Although we have investigated the energy production potential of several types of biofuels in this
report, the processing of biomass is the most significant step in getting energy out of renewable energy
sources. Although biomass is a renewable fuel source, it is part of the carbon cycle and is often called a
“carbon netural” fuel. By way of photosynthesis, carbon from the atmosphere is converted into biological
matter, and then goes back into the atmosphere or soil via decay or combustion. This process happens
over a relatively short timescale and plant matter used as a fuel can be constantly replaced by planting for
new growth, effectively resulting in zero “net” carbon emissions. It is commonly accepted that the
amount of carbon stored in biomass is approximately 50 percent of the biomass by weight (Ref. 28).
Cellulose, hemicellulose, and lignin are the three main components of the bulk of biomass and are listed
in Figure 2.
NASA/TM—2009-215587 10
15. The production of biomass is a growing industry with advances being made every year as pressure for
sustainable nonfossil fuels increases. Biomass has surpassed hydroelectric power as the largest domestic
source of renewable energy. Biomass currently supplies over 3 percent of the U.S. total energy
consumption primarily through industrial heat and steam production by the pulp and paper industry and
electrical generation with forest industry residues and municipal solid waste (Ref. 30).
A new industry is emerging around the production of bioenergy and bio-based products. Facilities
that integrate biomass conversion processes and equipment to produce fuels, power, and chemicals from
biomass are called biorefineries and are very similar in concept to petroleum refineries. These refineries
concentrate specifically on refining biomass feedstock (agricultural and forestry crops and residues and
municipal and process wastes) into chemicals, fuels, pressboards, biocomposites, and other valuable
products.
The commercial refining of biomass (biorefining) from trees or agricultural residues is fast
approaching because of advances made in acidic and enzymatic hydrolysis of the cellulose component of
biomass and in some newer processes for biomass refining. By producing multiple products, a biorefinery
can take advantage of the difference in biomass components and maximize the value derived from
biomass feedstocks (Ref. 31). Figure 3 lists an example of the conceptual activities of a biorefinery.
A new UOP/Eni Ecofining process technology called green diesel has been developed by UOP LLC
that produces green diesel from vegetable oil. This process utilizes catalytic saturation,
hydrodeoxygenation, decarboxylation, and hydroisomerization reactions to produce an isoparaffin-rich
diesel fuel from renewable feedstock containing triglycerides and fatty acids such as soybean, palm, and
rapeseed oils. The resultant biofuel product has a high cetane value and is compatible for blending with
the standard mix of petroleum-derived diesel fuels, which can provide added value to the refiner. They
conclude that green diesel has the potential to displace more petroleum resources per energy content in
the fuel when compared with biodiesel (Ref. 33).
NASA/TM—2009-215587 11
16. Gorden and Polle (Ref. 34) describe a process to significantly increase bioproductivity in algal
photobioreactors by integrating photonics with biotechnologies. This is achieved by customizing the
photonic temporal, spectral, and intensity characteristics with pulsed light-emitting diodes, which produce
rapid light-dark algae exposure cycles. The result is a higher yield from a technique that is adaptable to
existing photobioreactors.
The technologies used for the processing of biomass primarily consist of gasification, hydrolysis, and
anaerobic digestion and these techniques are briefly described below.
3.1 Gasification
Gasification is a process that uses heat, pressure, and steam to convert materials directly into a gas
composed primarily of carbon monoxide and hydrogen. When biomass is heated with no oxygen or only
about one-third the oxygen needed for efficient combustion, it typically gasifies (pyrolyzes) to a mixture
of carbon monoxide and hydrogen called synthesis gas.
Typical raw materials used in gasification are coal, petroleum-based materials, and organic materials.
The feedstock is prepared and fed, in either dry or slurried form, into a sealed reactor chamber called a
gasifier. The feedstock is subjected to high heat, pressure, and either an oxygen-rich or oxygen-starved
environment within the gasifier. The three primary products from gasification are hydrocarbon gases
(syngas), hydrocarbon liquids (oils), and char (ash).
Syngas (synthesis gas) burns more efficiently and cleanly than the solid biomass from which it was
made. Syngas also mixes more readily with chemical catalysts than solid fuels, which can greatly enhance
its ability to be converted to other fuels needed for transportation. The Fischer-Tropsch process converts
syngas to liquid fuels needed for transportation. A variety of other catalytic processes can turn syngas into
a myriad of chemicals or other potential fuels or products.
3.2 Hydrolysis
Hydrolysis is a chemical decomposition process that uses water to split chemical bonds of substances.
There are two types of hydrolysis: acid and enzymatic. Feedstocks that may be appropriate for acid or
enzymatic hydrolysis typically are plant-based materials containing cellulose. These include forest
material and sawmill residue, agricultural residue, urban waste, and waste paper.
NASA/TM—2009-215587 12
17. All plants have structural components composed of lignocellulosic fibers, which in turn comprise
three major fractions: cellulose, hemicellulose, and lignin. Cellulose and hemicellulose are chains of sugar
molecules that can be broken down chemically or biologically into the component sugars. The sugars are
then fermented using yeast or bacteria to produce ethanol, which is then distilled to a higher concentration
for final use. Lignin binds cellulose and hemicellulose together and cannot be broken down to form
sugars. At this point, the most cost-effective use for lignins is as a fuel for biomass-to-energy facilities.
Sugars can also be converted to levulinic acid and citric acid. Levulinic acid is a versatile chemical
that is a precursor to other specialty chemicals, fuels and fuel additives, herbicides, and pesticides. The
largest application for citric acid is in the beverage industry, which accounts for about 45 percent of the
market for this product. Citric acid is also used in a wide variety of candies, frozen foods, and processed
cheeses and as a preservative in canned goods, meats, jellies, and preserves.
3.3 Anaerobic Digestion
Anaerobic digestion is the bacterial breakdown of organic materials in the absence of oxygen. This
biological process produces a gas called biogas that is primarily composed of methane and carbon
dioxide. This gas is produced from feedstocks such as sewage sludge, livestock manure, and wet organic
materials. There are three steps used in anaerobic decomposition: (1) the decomposition of plant or animal
matter by bacteria into molecules such as sugar, (2) the conversion of decomposed matter to organic
acids, and (3) the organic acid conversion to methane gas. Cellulose and hemicellulose, two of the three
main components of the great bulk of biomass resources, are polymers of sugars and can be broken down
in this way to those component sugars for fermentation or for processing to ethanol and other valuable
fuels and chemicals.
Anaerobic processes can occur naturally or in a controlled environment such as a biogas plant. In
controlled environments, organic materials such as sewage sludge and other relatively wet organic
materials, along with various types of bacteria, are put in an airtight container called a digester where the
process occurs. Depending on the waste feedstock and the system design, biogas is typically 55 to
75 percent pure methane.
4.0 Biomass Supply
According to the U.S. Department of Agriculture, the potential biomass annual supply could be as
much as 1.4 billion dry tons per year (dT/yr), and this resource is large and relatively untapped (Ref. 35).
It comprises mainly agricultural residues (~1 billion dT/yr) and forestry residues (~0.4 billion dT/yr). As
an energy feedstock, biomass could be used to displace a large amount of imported foreign oil (~1 to
2 billion barrels per year), and therefore it represents a very large domestic renewable energy reserve.
Approximately 70 to 100 billion gal per year of ethanol could be produced from this biomass resource
without having to plant a single energy crop. This is about 100 times the current ethanol production
capacity in the United States. The 1.4 billion dT/yr of biomass resource potential comprises
approximately 1 billion dT/yr of agricultural residues and 0.4 billion dT/yr of potential forestry residues.
Other sources of biomass feedstock that could also be utilized in the near term include urban wood waste,
mill residues, and new dedicated energy crops (Ref. 35).
5.0 Biofuel Uses in the Aviation Industry
The temperature, viscosity, and opacity (clear/clean) requirements for aviation-grade fuel have been
the most difficult challenge for biofuels. One such fuel that has been successful is aviation-grade ethanol.
Aviation-grade ethanol (AGE–85) is a high-performance, 85-percent-ethanol blended fuel for use in any
reciprocating engine aircraft. AGE–85 is beginning to replace 100 octane low-lead aviation gasoline,
which has been the standard leaded gasoline for aviation since World War II. AGE–85 offers a substantial
improvement in performance for these aircraft, producing at least 12 percent more horsepower and torque
NASA/TM—2009-215587 13
18. at typical cruising power. Lower operating temperatures are also achieved, with engines tending to run 50
to 100 C cooler than with current fuel. Because AGE–85 fuel causes considerably less buildup of
combustion byproducts in the engine, the time between engine overhauls is greater, and maintenance
costs are lower.
Daggett et al. (Ref. 36) provide an excellent overview of alternative fuels and their feasibility for use
in the aviations industry. They considered bioderived fuels, methanol, ethanol, liquid natural gas, liquid
hydrogen, and synthetic fuels for their potential to replace or supplement conventional jet fuels. They
point out that synthetic fuel made from coal, natural gas, or other hydrocarbon feedstock shows
significant promise as a fuel that could be easily integrated into present and future aircraft with little or no
modification to current aircraft designs. Alternatives, such as biofuel, and in the longer term hydrogen,
have good potential but presently appear to be better suited for use in ground transportation.
CFM International (Ref. 37) has successfully performed an initial test of a CFM56–7B engine using
an ester-type biofuel. The CFM56–7B is the exclusive engine for the Boeing next-generation single-aisle
airliner: 737–600/–700/–800/–900. The thrust ranges from 18 500 to 27 300 lb. The biofuel used for this
test was a 30 percent vegetable oil methyl ester blended with 70 percent conventional Jet-A1 fuel. This
test was designed to check the operation of a jet engine using a fuel made from biomass, without making
any technical changes to the engine. With this type of biofuel, the target is a net reduction of
20 percent in CO2 emissions compared with current fuels.
The U.S. Defense Department has been directed to explore a wide range of energy alternatives and
fuel efficiency efforts in a bid to reduce the military’s reliance on oil to power its aircraft, ground
vehicles, and nonnuclear ships. The Defense Advanced Research Projects Agency (DARPA) is interested
in proposals for research and development efforts to develop a process that efficiently produces a
surrogate for petroleum-based military jet fuel (JP–8) from oil-rich crops produced by either agriculture
or aquaculture (including but not limited to plants, algae, fungi, and bacteria) and which ultimately can be
an affordable alternative to petroleum-derived JP–8. Current commercial processes for producing
biodiesel yield a fuel that is unsuitable for military applications, which require higher energy density and
a wide operating temperature range. There are several research institutions and companies collaborating
on this effort.
Summary and Conclusion
Finding a viable source of renewable energy is a global task. We presented several biofuel
alternatives to using fossil fuels. The use of corn for ethanol production shows promise for local farmers
as well as the automotive industry, but the technology is quite mature and growth is not expected for
traditional ethanol. However, cellulosic ethanol is gaining interest for its ability to utilize more biomass
from plants than ethanol. Biodiesel has shown promise but demand far exceeds current capacity.
Biodiesel from algae has the potential to generate orders of magnitude more fuel than any other method,
and it should be researched so that an ideal algae species or strain can be identified and utilized for
efficient biofuel production. Biodiesel from halophytes also show great promise because of their ability to
serve not only as a fuel source, but a food source as well.
Synthetic oil and hydrogen also show promise for the future as we look for efficient, safe, and
affordable biofuels as a replacement for fossil fuels.
We plan to investigate the feasibility of using halophytes as well as marine algae for use as biofuels
for the aviation industry with the hope that we will provide some insight and guidance into the large-scale
research and development of renewable energy sources in the future.
NASA/TM—2009-215587 14
19. References
1. National Renewable Energy Laboratory. 2007. http://www.nrel.gov/ Accessed August 21, 2009.
2. Bockris, J.O’M.: Will Lack of Energy Lead to the Demise of High-Technology Countries in This
Century? Int. J. Hydrogen Energy, vol. 32, no. 2, 2007, pp. 153–158.
3. Demirbas, Ayhan: Progress and Recent Trends in Biofuels. Prog. Energy Combust. Sci., vol. 33,
no. 1, 2007, pp. 1–18.
4. Watkins, Eric: Watching the World: The Switch to Biofuels. Oil Gas J., vol. 104, no. 46, 2006.
5. Energy Information Administration: The National Energy Modeling System: An Overview 1998.
DOE/EIA–0581(98), 1998.
6. American Coalition for Ethanol: http://www.ethanol.org/ Accessed August 21, 2009.
7. Johnson, Jeff: Ethonal—Is It Worth It? Chem. Eng. News, vol. 85, no. 1, 2007, pp. 19–21.
http://pubs.acs.org/email/cen/html/010207085554.html Accessed August 20, 2009.
8. Pimentel, David; and Patzek, T.W.: Ethanol Production Using Corn, Switchgrass, and Wood;
Biodiesel Production Using Soybean and Sunflower. Nat. Resour. Res., vol. 14, no. 1, 2005, p. 65.
9. Pimentel, D.: Ethanol From Corn Wastes Energy. Industrial Bioprocessing, vol. 23, no. 10, 2001,
pp. 1–2.
10. Shapouri, H., et al.: The 2001 Net Energy Balance of Corn-Ethanol. Proceedings of the Conference
on Agriculture as a Producer and Consumer of Energy, Arlington, VA, 2004.
11. Bullis, Kevin: Will Cellulosic Ethanol Take Off? Fuel From Grass and Wood Chips Could Be Big in
the Next 10 Years—If the Government Helps. Tech. Rev., 2007.
http://www.technologyreview.com/Energy/18227/ Accessed August 25, 2009.
12. Hammond, Lou Ann: Cellulosic Ethanol Fact Sheet. 2007.
http://www.carlist.com/blog/?p=403 Accessed August 21, 2009.
13. ASTM D 6751–03: Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels.
ASTM International, West Conshohocken, PA, 2003.
14. U.S. Department of Energy: Alternative & Advanced Fuels. 2009.
http://www.afdc.energy.gov/afdc/fuels/biodiesel_what_is.html Accessed August 21, 2009.
15. Hill, Jason, et al.: Environmental, Economic, and Energetic Costs and Benefits of Biodiesel and
Ethanol Biofuels. Proceedings of the National Academy of Sciences of the United States. vol. 103,
no. 30, 2006, pp. 11206–11210.
16. Briggs, Michael: Widescale Biodiesel Production From Algae. University of New Hampshire
Biodiesel Group, 2004. http://www.unh.edu/p2/biodiesel/article_alge.html Accessed August 20,
2009.
17. United States Department of Agriculture: Agricultural Statistics 2004. Table 3–51, 2004, p. III–26.
18. Basiron, Yusof; and Simeh, Mohd Arif: Vision 2020—The Palm Oil Phenomenon. Oil Palm Industry
Economic Journal, vol. 5, no. 2, 2005.
19. Riesing, Thomas F.: Cultivating Algae for Liquid Fuel Production. 2006.
http://oakhavenpc.org/cultivating_algae.htm Accessed August 21, 2009.
20. GreenFuel Technologies Corporation: Technology: High Yield Carbon Recycling. 2008.
http://www.greenfuelonline.com/technology.htm Accessed August 20, 2009.
21. Bullock, C.: Australians Test Greenfuel Algae Biofuel Process. Industrial Bioprocessing, vol. 28,
2006, pp. 2–3.
22. Yensen N.P.: Salt-Tolerant Plants and Their Uses. United States Department of Agriculture
Halophyte Database, 1998. http://www.ussl.ars.usda.gov/pls/caliche/halophyte.preface Accessed
August 21, 2009.
23. Glenn, E.P.; Brown, J.J.; and Blumwald, E.: Salt Tolerance and Crop Potential of Halophytes. Crit.
Rev. Plant Sci., vol. 18, no. 2, 1999, pp. 227–255.
24. Jaradat, A.A.: Halophytes for Sustainable Biosaline Farming Systems in the Middle East. (Book
Chapter). Desertification in the Third Millennium, A.S. Alsharhan, ed., A.A. Balkema, Lisse, Exton,
PA, 2003, pp. 187–203.
NASA/TM—2009-215587 15
20. 25. Glenn, E.P.; Brown, J.J.; and O’Leary, J.W.: Irrigating Crops With Seawater. Sci. Amer., 1998,
pp. 76–81.
26. Sasol: Brochure http://www.sasol.com/sasol_internet/downloads/
CTL_Brochure_1125921891488.pdf Accessed August 20, 2009.
27. Energy Information Administration: Annual Energy Outlook 2009.
http://www.eia.doe.gov/oiaf/aeo/pdf/issues.pdf Accessed August 24, 2009.
28. Smith, James E.; Heath, Linda S.; and Jenkins, Jennifer C.: Forest Volume-to-Biomass Models and
Estimates of Mass for Live and Standing Dead Trees of U.S. Forests. United States Department of
Agriculture General Technical Report NE–298, 2003.
http://www.uvm.edu/~jcjenkin/smith%20et%20al.%202003.pdf Accessed August 21, 2009.
29. Energy Information Administration: Biomass. 2008.
http://www.eia.doe.gov/cneaf/solar.renewables/page/biomass/biomass.html Accessed August 21,
2009.
30. U.S. Department of Energy: Biomass Program, 2008.
http://www1.eere.energy.gov/biomass/technologies.html Accessed August 21, 2009.
31. Jarvis, Eric E.: Biomass Refining: The Future of Ethanol. National Renewable Energy Laboratory,
2005. http://www1.umn.edu/iree/pdfs/jarvis.pdf Accessed July 2006.
32. National Renewable Energy Laboratory: Biomass Research, 2008.
http://www.nrel.gov/biomass/biorefinery.html Accessed August 21, 2009.
33. Kalnes, Tom; Marker, Terry; and Shonnard, D.R.: Green Diesel: A Second Generation Biofuel.
International Journal of Chemical Reactor Engineering, vol. 5, A48, 2007.
34. Gordon, Jeffrey M.; and Polle, Juergen E.W.: Ultrahigh Bioproductivity From Algae. Appl.
Microbiol. Biotechnol, vol. 76, no. 5, 2007.
35. U.S. Department of Energy: Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The
Technical Feasibility of a Billion-Ton Annual Supply. 2005.
http://feedstockreview.ornl.gov/pdf/billion_ton_vision.pdf
36. Daggett, D., et al.: Alternative Fuels and Their Potential Impact on Aviation. NASA/TM—2006-
214365, 2006. http://gltrs.grc.nasa.gov
37. Green Car Congress: Successful Initial Test of 30% Biofuel Blend in Commercial Jet Engine. 2007.
http://www.greencarcongress.com/2007/06/successful_init.html Accessed Sept. 22, 2009.
NASA/TM—2009-215587 16
21. Form Approved
REPORT DOCUMENTATION PAGE
OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the
data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this
burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302.
Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB
control number.
PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To)
01-12-2009 Technical Memorandum
4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER
Biofuels as an Alternative Energy Source for Aviation--A Survey
5b. GRANT NUMBER
5c. PROGRAM ELEMENT NUMBER
6. AUTHOR(S) 5d. PROJECT NUMBER
Bomani, Bilal, M. McDowell; Bulzan, Dan, L.; Centeno-Gomez, Diana, I.; Hendricks,
Robert, C.
5e. TASK NUMBER
5f. WORK UNIT NUMBER
WBS 561581.02.08.03.16.02
7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION
National Aeronautics and Space Administration REPORT NUMBER
John H. Glenn Research Center at Lewis Field E-16828
Cleveland, Ohio 44135-3191
9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSORING/MONITOR'S
National Aeronautics and Space Administration ACRONYM(S)
Washington, DC 20546-0001 NASA
11. SPONSORING/MONITORING
REPORT NUMBER
NASA/TM-2009-215587
12. DISTRIBUTION/AVAILABILITY STATEMENT
Unclassified-Unlimited
Subject Category: 09
Available electronically at http://gltrs.grc.nasa.gov
This publication is available from the NASA Center for AeroSpace Information, 443-757-5802
13. SUPPLEMENTARY NOTES
14. ABSTRACT
The use of biofuels has been gaining in popularity over the past few years because of their ability to reduce the dependence on fossil fuels.
As a renewable energy source, biofuels can be a viable option for sustaining long-term energy needs if they are managed efficiently. We
investigate past, present, and possible future biofuel alternatives currently being researched and applied around the world. More specifically,
we investigate the use of ethanol, cellulosic ethanol, biodiesel (palm oil, algae, and halophytes), and synthetic fuel blends that can
potentially be used as fuels for aviation and nonaerospace applications. We also investigate the processing of biomass via gasification,
hydrolysis, and anaerobic digestion as a way to extract fuel oil from alternative biofuels sources.
15. SUBJECT TERMS
Biofuels; Alternative fuel; Halophytes; Algae; Renewable energy; Fuel
16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF 18. NUMBER 19a. NAME OF RESPONSIBLE PERSON
ABSTRACT OF STI Help Desk (email:help@sti.nasa.gov)
a. REPORT b. ABSTRACT c. THIS PAGES 19b. TELEPHONE NUMBER (include area code)
U U PAGE UU 22 443-757-5802
U
Standard Form 298 (Rev. 8-98)
Prescribed by ANSI Std. Z39-18