multiple choiceAssuming that the probability for each shot is .pdf
•
0 likes•2 views
multiple choice Assuming that the probability for each shot is independent, how many points, on average, can jenny expect to make when she shoots a one-and-one ( when she only gets a second shot if she makes the first)? A. .96 B. 1 C. 2 D. .36 E. 0 Solution Average = 1 × P( she makes the first shot but misses the second shot) + 2× P( she makes both the shots) Average = 1× 0.6 × 0.4 + 2× 0.6 × 0.6 = 0.96.
Report
Share
Report
Share
Download to read offline
Recommended
Write the program segment necessary to Test the C flag. i. If the .pdf
Write the following strings using ASCII encoding. Write your final answers in hexadecimal.
(a) SOS
(b) Cool
(c) boo!
Show how the strings are stored in a byte-addressable memory on a little-endian machine
starting at memory address 0x00001050C. Clearly indicate the memory address of each byte.
Solution
Answet contains ASCII code and hexadecimal code is in bracket.
a) 83 79 83 (53 4F 53)
b) 67 111 111 108 (43 6F 6F 6C)
c) 98 111 111 33(62 6F 6F 21).
Why must Group IV be treated with (NH4)2CO3 in basic solution What .pdf
Why is a 99% condence interval wider than a 95% condence interval?
Solution
confidence intervals are usually expressed with 95% confidence, this is just a tradition.
Confidence intervals can be computed for any desired degree of confidence.
People are often surprised to learn that 99% confidence intervals are wider than 95% intervals,
and 90% intervals are narrower. But this makes perfect sense. If you want more confidence that
an interval contains the true parameter, then the intervals will be wider. If you want to be
100.000% sure that an interval contains the true population, it has to contain every possible value
so be very wide. If you are willing to be only 50% sure that an interval contains the true value,
then it can be much narrower..
what is IOT what us SolutionAns. IOT stands for Internet of Th.pdf
What happens when a business is able to segment a market on the basis of needs, but unable to
demographically or behaviorally identify the segments?
Solution
There are four types of segmentation, which are demographic, geographic, psychographic and
behavioral. When a business is able to segment a market on the basis of needs, but unable to
demographically or behaviorally identify the segment, then the business will survive for a short
term only. The business would be able to fulfill the needs of their customers for a shorter span of
time, but it requires proper strategy and segmentation to be done to sustain and be succeed in a
long run..
What is the difference between a BSS and a ESSSolutionBSS sta.pdf
what is IOT what us
Solution
Ans. IOT stands for Internet of Things: It is a connection of devices over internet to build
applications and services which will serve people needs.
It is a network of applications built over a planned structure to make human lives easy. It can
cover as small a need like an email protocol to as large a need as smart homes. With the advent
of internet and cloud technologies, it has a bright future ahead. It can be extended to army
services too..
What is the role of capsid and nucleocapsid proteins during the life.pdf
What is the major difference between a hub and switch, which one is more efficient at routing
traffic, and which is preferable in larger network configurations?
Solution
The term\' Hub\' usually refers to a piece of network equipment which connects personal
computers together.This type of device carry forwards the information it receives so that it\'s
ports receive the information.Hubs repeat everything they receive and can be used to extend the
network.This can cause unnecessary traffic being send to devices in a network.This kind of
repeating is not a problem in the case of smaller networks but for larger traffic it becomes a
problem so we need to implement another network equipment called switch.
Switches control the netwok traffic by containing the address information of each packet and it
checks to which ports it has to send packets and sends on packets to relevant ports only.This
allows simultaneous communication across switch by improving bandwidth utilisation.
Hubs are used in smaller networks and are used to extend network by providing more number of
ports and switches divide the network into smaller and less blocked sections. Finally switches are
more efficient at routing traffic..
What distinguish between managerial and financial accounting as to (.pdf
What are the similarities between internal and external agents? What are the differences?
Are all consultants change agents? Are all change agents consultants? When does a manager or
leader act as a change agent?
What about change is disruptive? How can meeting the challenge of change becaome
organizational opportunities?
Solution
Internal and external agents have similarities as they both act as change agents and want to bring
necessary change that can improve the organization and the organization can capitalize upon the
new opportunities. Though there are many differences between the internal and external agents.
Internal agents belong to the organization, whereas the external agent is hired as consultant by
the organization. An external agent will be the expertise upon the issues for that he or she is
hired, but an internal agent may not be the expert for the change management. External agent is
hired for a fixed period of time, but internal agent works for indefinitely for the organization.
Consultants are the people who hold expertise in particular areas, so the consultants can be hired
as change agent. But, they may not necessarily be used as change agent. All change agents may
not be consultants as internal resources such as managers and leaders within the organization,
can also act as a change management. When an organization wants to use internal agents for the
change process, then managers and leaders act as change management.
A disruptive change refers to the change in the organizational structure and process that creates
opportunities and make an old structure to be obsolete and irrelevant. Besides, the disruptive
change in fast and quick that unfreeze, redesign and refreeze the organization.
A change management brings the necessary change in the organizational structure and make the
organization to be adaptive to the new market conditions. While doing so, the organization
becomes lean and starts continuous scanning of the market conditions. It helps the organization
to capitalize on new opportunities on offer by the market environment..
There is a lack of spirituality in a person that cheats because they.pdf
The Value Part
Comment on a service organization that provides for you. My favorite is the local hardware
store. They carry a ton of different items. I go in and ask for something and they normally carry
it and will sell me just the amount I need. Home Depot will sell me the item in a 100 unit box
when I only need 10 pieces.
Do service organizations add value to society? Well, according to the MA Dept of Revenue, over
85% of the persons who filed MA Income Taxes, their primary (largest) source of income came
from a service organization. Massachusetts would be in deep trouble financially if there were
only a few service organization were paying wages in this state.
Do you think the US economy needs service organizations?
Solution
With constant technological advancements and the increasing need of producing a steady stream
of revenue from ongoing contracts instead of having a single payment coming from a sold
manufactured product, more and more companies are adapting to the idea of transforming their
age-old traditional manufacturing business to a product-service system. The businesses are now
shifting to a subscription pricing model from the existing lump-sum one-time payment systems.
Talking about the servitisation of products, service industries such as hospitality, retail, banking,
health, information technology, education, etc. focus on service aspect of the business more than
the product aspect. These industries are mass employment providers and heavily invest in their
human capital. Service organisations make use of the skillset, knowledge, experience and talent
of their human resources to produce valuable outcomes for their customers. Whereas,
manufacturing organisations are accused of exploiting depleting natural resources by using them
as raw materials and in return, adversely affects the environment and adding to the prevailing
environmental issues such as pollution and global warming.
The importance of the service organisations in the US economy can be measured by the fact that
in the latest list of Fortune 500 companies, there are more number of service organisations than
number of manufacturers and product-based organisations in comparison to the fortune 500 lists
of past decades. Today, no company can boast of being just a product-based organisation.
Service has become an inseparable component of the product offering. As mentioned in the case,
according to the Massachusetts Department of Revenue, over 85% of the people who filed MA
income taxes had their primary income source coming from a service organisation. This shows
the huge employment opportunities that the service organisations have to offer in the economy.
There is no denying that the relative importance of service is increasing in the product offering of
many organisations. Take the example of IBM that treats its business as a service business
instead of a manufacturing business. Inspite of being in the business of manufacturing of
computers, the management of IBM over .
select the answer a general search engine differs from a subject di.pdf
Section 2: Journal Entries (20 points) As of July 1, 2016, the City of Saratoga Springs decided to
purchase a privately operated swimming pool and to create a swimming pool fund. During the
year, the following transactions occurred: (a) $1,000,000 was borrowed with a note payable from
a local bank at an interest rate of 6%, (b) Purchased the following items in cash: a. Land b.
Building e. Land improvements $400,000 d. Equipment e. Supplies $300,000 $400,000
$200,000 $190,000 (c) Charges for services amounted to $600,000, all received in cash. (d)
Depreciation was recorded for the followings in the amounts specified below a. Building b. Land
improvements$40,000 c. Equipment $20,000 S20,000 1. In what fund does this need to be
accounted for? (Name the fund.) (4 points) When converted to government wide financial
statements, in which column should this fund be included? (4 points) Journal entries ( points
each)
Solution
SOLUTION:DebitCredit1Cash100,000Note payable100,0002Land300,000Building400,000Land
Improvement400,000Equipment200,000Supplies190,000Cash1,490,0003Cash600,000Operating
revenue- charge for services600,0004Operating expense-Depreciation80,000Accumulated
depreciation - Building20,000Accumulated depreciation - Land
Improvement40,000Accumulated depreciation - Equipment20,000.
Recommended
Write the program segment necessary to Test the C flag. i. If the .pdf
Write the following strings using ASCII encoding. Write your final answers in hexadecimal.
(a) SOS
(b) Cool
(c) boo!
Show how the strings are stored in a byte-addressable memory on a little-endian machine
starting at memory address 0x00001050C. Clearly indicate the memory address of each byte.
Solution
Answet contains ASCII code and hexadecimal code is in bracket.
a) 83 79 83 (53 4F 53)
b) 67 111 111 108 (43 6F 6F 6C)
c) 98 111 111 33(62 6F 6F 21).
Why must Group IV be treated with (NH4)2CO3 in basic solution What .pdf
Why is a 99% condence interval wider than a 95% condence interval?
Solution
confidence intervals are usually expressed with 95% confidence, this is just a tradition.
Confidence intervals can be computed for any desired degree of confidence.
People are often surprised to learn that 99% confidence intervals are wider than 95% intervals,
and 90% intervals are narrower. But this makes perfect sense. If you want more confidence that
an interval contains the true parameter, then the intervals will be wider. If you want to be
100.000% sure that an interval contains the true population, it has to contain every possible value
so be very wide. If you are willing to be only 50% sure that an interval contains the true value,
then it can be much narrower..
what is IOT what us SolutionAns. IOT stands for Internet of Th.pdf
What happens when a business is able to segment a market on the basis of needs, but unable to
demographically or behaviorally identify the segments?
Solution
There are four types of segmentation, which are demographic, geographic, psychographic and
behavioral. When a business is able to segment a market on the basis of needs, but unable to
demographically or behaviorally identify the segment, then the business will survive for a short
term only. The business would be able to fulfill the needs of their customers for a shorter span of
time, but it requires proper strategy and segmentation to be done to sustain and be succeed in a
long run..
What is the difference between a BSS and a ESSSolutionBSS sta.pdf
what is IOT what us
Solution
Ans. IOT stands for Internet of Things: It is a connection of devices over internet to build
applications and services which will serve people needs.
It is a network of applications built over a planned structure to make human lives easy. It can
cover as small a need like an email protocol to as large a need as smart homes. With the advent
of internet and cloud technologies, it has a bright future ahead. It can be extended to army
services too..
What is the role of capsid and nucleocapsid proteins during the life.pdf
What is the major difference between a hub and switch, which one is more efficient at routing
traffic, and which is preferable in larger network configurations?
Solution
The term\' Hub\' usually refers to a piece of network equipment which connects personal
computers together.This type of device carry forwards the information it receives so that it\'s
ports receive the information.Hubs repeat everything they receive and can be used to extend the
network.This can cause unnecessary traffic being send to devices in a network.This kind of
repeating is not a problem in the case of smaller networks but for larger traffic it becomes a
problem so we need to implement another network equipment called switch.
Switches control the netwok traffic by containing the address information of each packet and it
checks to which ports it has to send packets and sends on packets to relevant ports only.This
allows simultaneous communication across switch by improving bandwidth utilisation.
Hubs are used in smaller networks and are used to extend network by providing more number of
ports and switches divide the network into smaller and less blocked sections. Finally switches are
more efficient at routing traffic..
What distinguish between managerial and financial accounting as to (.pdf
What are the similarities between internal and external agents? What are the differences?
Are all consultants change agents? Are all change agents consultants? When does a manager or
leader act as a change agent?
What about change is disruptive? How can meeting the challenge of change becaome
organizational opportunities?
Solution
Internal and external agents have similarities as they both act as change agents and want to bring
necessary change that can improve the organization and the organization can capitalize upon the
new opportunities. Though there are many differences between the internal and external agents.
Internal agents belong to the organization, whereas the external agent is hired as consultant by
the organization. An external agent will be the expertise upon the issues for that he or she is
hired, but an internal agent may not be the expert for the change management. External agent is
hired for a fixed period of time, but internal agent works for indefinitely for the organization.
Consultants are the people who hold expertise in particular areas, so the consultants can be hired
as change agent. But, they may not necessarily be used as change agent. All change agents may
not be consultants as internal resources such as managers and leaders within the organization,
can also act as a change management. When an organization wants to use internal agents for the
change process, then managers and leaders act as change management.
A disruptive change refers to the change in the organizational structure and process that creates
opportunities and make an old structure to be obsolete and irrelevant. Besides, the disruptive
change in fast and quick that unfreeze, redesign and refreeze the organization.
A change management brings the necessary change in the organizational structure and make the
organization to be adaptive to the new market conditions. While doing so, the organization
becomes lean and starts continuous scanning of the market conditions. It helps the organization
to capitalize on new opportunities on offer by the market environment..
There is a lack of spirituality in a person that cheats because they.pdf
The Value Part
Comment on a service organization that provides for you. My favorite is the local hardware
store. They carry a ton of different items. I go in and ask for something and they normally carry
it and will sell me just the amount I need. Home Depot will sell me the item in a 100 unit box
when I only need 10 pieces.
Do service organizations add value to society? Well, according to the MA Dept of Revenue, over
85% of the persons who filed MA Income Taxes, their primary (largest) source of income came
from a service organization. Massachusetts would be in deep trouble financially if there were
only a few service organization were paying wages in this state.
Do you think the US economy needs service organizations?
Solution
With constant technological advancements and the increasing need of producing a steady stream
of revenue from ongoing contracts instead of having a single payment coming from a sold
manufactured product, more and more companies are adapting to the idea of transforming their
age-old traditional manufacturing business to a product-service system. The businesses are now
shifting to a subscription pricing model from the existing lump-sum one-time payment systems.
Talking about the servitisation of products, service industries such as hospitality, retail, banking,
health, information technology, education, etc. focus on service aspect of the business more than
the product aspect. These industries are mass employment providers and heavily invest in their
human capital. Service organisations make use of the skillset, knowledge, experience and talent
of their human resources to produce valuable outcomes for their customers. Whereas,
manufacturing organisations are accused of exploiting depleting natural resources by using them
as raw materials and in return, adversely affects the environment and adding to the prevailing
environmental issues such as pollution and global warming.
The importance of the service organisations in the US economy can be measured by the fact that
in the latest list of Fortune 500 companies, there are more number of service organisations than
number of manufacturers and product-based organisations in comparison to the fortune 500 lists
of past decades. Today, no company can boast of being just a product-based organisation.
Service has become an inseparable component of the product offering. As mentioned in the case,
according to the Massachusetts Department of Revenue, over 85% of the people who filed MA
income taxes had their primary income source coming from a service organisation. This shows
the huge employment opportunities that the service organisations have to offer in the economy.
There is no denying that the relative importance of service is increasing in the product offering of
many organisations. Take the example of IBM that treats its business as a service business
instead of a manufacturing business. Inspite of being in the business of manufacturing of
computers, the management of IBM over .
select the answer a general search engine differs from a subject di.pdf
Section 2: Journal Entries (20 points) As of July 1, 2016, the City of Saratoga Springs decided to
purchase a privately operated swimming pool and to create a swimming pool fund. During the
year, the following transactions occurred: (a) $1,000,000 was borrowed with a note payable from
a local bank at an interest rate of 6%, (b) Purchased the following items in cash: a. Land b.
Building e. Land improvements $400,000 d. Equipment e. Supplies $300,000 $400,000
$200,000 $190,000 (c) Charges for services amounted to $600,000, all received in cash. (d)
Depreciation was recorded for the followings in the amounts specified below a. Building b. Land
improvements$40,000 c. Equipment $20,000 S20,000 1. In what fund does this need to be
accounted for? (Name the fund.) (4 points) When converted to government wide financial
statements, in which column should this fund be included? (4 points) Journal entries ( points
each)
Solution
SOLUTION:DebitCredit1Cash100,000Note payable100,0002Land300,000Building400,000Land
Improvement400,000Equipment200,000Supplies190,000Cash1,490,0003Cash600,000Operating
revenue- charge for services600,0004Operating expense-Depreciation80,000Accumulated
depreciation - Building20,000Accumulated depreciation - Land
Improvement40,000Accumulated depreciation - Equipment20,000.
State briefly what functions an Engineering Services Department in a.pdf
Some of the major challenges to international expansion include all of the following except:
A. Political Risks
B. Unrelated diversification
C. Economic risks
D. Managerial Risks
Solution
The correct answer is option B.
Conducting business globally is very important and crucial decision made by the business and
require lots of effort and correct decisions in order to make it an effective move. It not only
provide new opportunities for growth and profit but also provide reputation to business globally.
There are several risk and challenges associated with doing business globally and a business
should consider these factors. These aspects are very important to consider when selecting an
international market to enter. They are:-
Unrelated diversification is nothing but the diversification when unrelated product lines and new
markets are added to current business. Example- Clothing manufacturer enters into watch
manufacturing business..
Satellites in geosynchronous orbit have the desirable property of re.pdf
saplinglearning.com O.CHM.111.309A.SP18 Northern Virginia Community College,
Alexandria-CHM 111 - Spring Chlorine Jump to... 2/26/2018 12:00 AM O 3.6/5 ( 2/25/2018
10:17 PM Gradeboo Calculator IncorrectIncarrect -Print -d Periodic Table Question 11 of 13
Map Sapling Learning gas can be prepared in the laboratory by the reaction of hydrochiloric acid
with manganese(iy) oxide: You add 43.3 g of MnO2 to a solution containing 43.7 g of HCI. (a)
What is the limiting reactant? HC (b) What is the theoretical yield of Ch? Number 70.29 CI (c) If
the yield of the reaction is 763%, what is the actual yield of chlorine? Number 53.63 g CI Exit
ePrev ous Give Up & View Souton OCheck Answer ONect about us careers privacy policy e of
use contact us help
Solution
a) according to balanced reaction
4 x 36.5 g HCl reacts with 86.94 g MnO2
43.7 g HCl reacts with 43.7 x 86.94 / 4 x 36.5 = 26.02 g MnO2.
but we have 43.3 g MnO2. so MnO2 present in exess.
limiting reagent = HCl
limiting reagent = HCl
b) 4 x 36.5 g HCl gives 71 g Cl2
43.7 g HCl gives 43.7 x 71 / 4 x 36.5 = 21.25 g
therotical yield of Cl2 = 21.25 g
c) % yield = (actual yield / therotical yield) x 100
76.3 = (actual yield / 21.25) x 100
0.763 = actual yield / 21.25
actual yield = 16.21 g.
Research and discuss an incident where it was discovered that a Remo.pdf
Requirement 1. Determine the maturity date and maturity value of each note. (For each
applicable note, compute interest using a 365-day year. Round to the nearest dollar.) Due date
Date Principal Amount Interest Rate Month/Day Year Maturity value Note (1) Apr. 1 (2) Sep. 30
Term Apr. 12019 20,000 22,000 16,000 13% 5% 11% 1 year 6 months Sep. 302019 Dec. 18
2018 Sep. 19 90 days Requirement 2. Jounalize the entries to establish each Note Receivable and
to record collection of principal and interest at maturity. Include a single adjusting entry on
December 31, 2018, the fiscal year-end, to record accrued interest revenue on any applicable
note. Explanations are not required. Round to the nearest dollar. (Record debits first, then credits.
Exclude explanations from journal entries.) Begin with the jounal entry to establish nate 1 Debit
Credit Date 2018 Apr. 1 Data Table Date Principal Amount Interest Rate Term 1 year 6 months
Note (1) Apr. (2) Sep. 30 20,000 22,000 16,000 13% 5% 11% Jcurnalize the entry to establish
note 2. Debit Credit Sep. 19 90 days Date 2018 Sep. 30 Accounts and Explanation PrintDone
Solution.
Please review the attached casescenario. You are Bill. Feel free to.pdf
Please make sure it works I\'ve been struggling with this and so far every answer I\'ve got back is
wrong. l. Input an integer value altitude and use a loop to write your own graphics program
\'fall.cpp\' that produces a graphic representation of falling object (e.g. circle). An object has
initial downward velocity 0. Each second, it\'s velocity increases by 32 ft/sec Plot the descent of
the falling object. Note that terminal velocity is 174 ft/sec so the object\'s velocity cannot exceed
that speed. Now modify your program to read an integer variable secondstoopen to open a
parachute after n seconds. Assume the velocity decreases by 100 ft/sec after the chute opens until
the downward velocity hits 17 ft/sec. Note that outside the bottom of the loop is the code for
where the chutist has landed put a message there. (use C++ code please)
Solution
#include
#include
using namespace std;
void fuel(float & dist);
void distance(float dist, float & time, float & time2 );
void Altitude(float time, float time2, float altlevel);
void Climb_Descend(float altlevel);
int main(int argc, char *argv[])
{
float altlevel;
float dist;
int fuelcon;
float speed=300, altspeed;
char choice;
bool OK;
do
{
fuel(dist); //calls
distance(dist, speed, altspeed);
Altitude(speed, altspeed, altlevel);
Climb_Descend (altlevel);
cout <<\"do you want to calaculate again?\"<>choice;
if(choice==\'Y\' || choice==\'y\')
{
OK=true;
}
else
OK=false;
}
while (OK==true);
system(\"PAUSE\");
return EXIT_SUCCESS;
}
void fuel (float & dist) //function
{
cout<<\"Enter the distance of flight \"<>dist;
}
void distance(float dist, float & time, float & time2)
{
time = dist/300; // Speed is constant 300mph
time2 = (time - 0.30)*60; //30 minutes is needed to get to the top level
cout<< \" the flight will last \"<.
Please make sure it works Ive been struggling with this and so far.pdf
Please help with this MIPS Assembly Language question! The task for a function named foo is
to increase the return value of the function bar (in register $v0) by 1 and return the result back to
the caller. The code of the function_foo is shown below: _foo: jal_bar addi $v0, $v0, 1 jr $ra
Assume that the function bar has been implemented. What is wrong with the function_foo
above? a. Nothing is wrong. b. Function _foo cannot use $v0. c. It will not go back to the
caller. d. The last instruction should be j $ra.
Solution
_foo: jal _bar //Jumps to the calculated address, and stored the return address in $ra.
addi $v0, $v0, 1 //Adds 1 to the value in $v0.
jr $ra //Jumps to address in register $ra.
So, nothing wrong with this function.
The answer is: a. Nothing is wrong..
Please explain the physiological mechanism for enlarged lymph nodes..pdf
Please check. I am trying to fix the two errors but I don\'t know what I\'m doing wrong.
#include
#include
int main() {
char choice; // choice of user
int percentArray[50];
int percentage;
int count=0;
char LetterGrade;
for (count=0; count<50; count++){ //for loop to read the grades till array size
printf(\"-------------------Enter percentage---------------\ Add marks(a) \ Quit(q) \ \")
scanf choice
if(choice == \'a\'){ //if user choice is a, then read the grade
printf \"Enter grade:\";
scanf percentage;
percentArray[count] = percentage; //add the grade to array
}
if(choice == \'q\'){ //if the user choice is q, then exit the loop
break;
}
}
printf \"Grades are: \"
for (int i=0; i
Solution
#include
#include
int main()
{
char choice; // choice of user
int percentArray[50];
int percentage;
int count=0,i;
//char LetterGrade;
for(count=0; count<50; count++)
{ //for loop to read the grades till array size
printf(\"-------------------Enter percentage---------------\ Add marks(a) \ Quit(q) \ \");
scanf(\"%c\",&choice);
if(choice == \'a\')
{ //if user choice is a, then read the grade
printf( \"Enter grade:\");
scanf(\"%d\", &percentage);
percentArray[count] = percentage; //add the grade to array
}
if(choice == \'q\')
{ //if the user choice is q, then exit the loop
break;
}
}
printf(\"Grades are: \");
for(i=0; i.
Mathematical Statistics.....Could answer be typed (is there any link.pdf
Mathematical Statistics.....Could answer be typed (is there any link between the two and if so can
you discuss them)
Discuss the link, if any, between linear transformations and calculating probabilities.
Solution
Mathematical statistics
the application of mathematics to statistics
the answer can be uploaded in any manner as long as it is neatly uploaded and legible
or any mathematical tool can also be used to upload the answer or you can simply type your text.
Modify the Stack class given in the book in order for it to store do.pdf
Modify the Stack class given in the book in order for it to store double numbers (instead of void*
pointers). Add a destructor that will delete all the stack by making calls to pop(), and for each
element destroyed the element will be printed to the output. Now add two constructors: the
default one that will create an empty stack, and another one that will receive an integer n and will
build a stack of n elements, such that the first element is 1.0, and the next ones are incremented
of 0.1. Upload your Stack class. It will be then tested for correctness with stacks.cpp.
Stack.h:
//: C05:Stack2.h
// Nested structs via linked list
#ifndef STACK2_H
#define STACK2_H
class Stack
{
struct Link {
void* data;
Link* next;
void initialize(void* dat, Link* nxt);
}* head;
public:
void initialize();
void push(void* dat);
void* peek();
void* pop();
void cleanup();
};
#endif // STACK2_H ///:~
Stack.cpp:
Sample Output:
2 1.5 1 0.5
1.3 1.2 1.1 1 end.
Solution
Hi, Please find my implemntation;
Please let me know in case of any issue.
//: C05:Stack2.h
// Nested structs via linked list
#ifndef STACK2_H
#define STACK2_H
#include
#include
using namespace std;
class Stack
{
struct Link {
double data;
Link* next;
void initialize(double dat, Link* nxt){
data = dat;
next = nxt;
}
};
Link *head;
public:
Stack(){
head = NULL;
}
Stack(int n){
for(double i=1; i<=n; i= i+ 0.1){
push(i);
}
}
~Stack(){
if(head != NULL){
while(head != NULL){
cout<data<<\" \";
Link *temp = head;
head = head->next;
delete temp;
}
cout<initialize(dat, head);
head = newNode;
}
double peek(){
if(head == NULL){
cout<<\"Stack is Empty!!!\"<data;
}
double pop(){
double d = -1;
if(head != NULL){
Link *temp = head;
d = temp->data;
head = head->next;
delete temp;
}else{
cout<<\"Stack is Empty!!!\"<.
Let V be a finite dimensional vector space over F with T element (V,.pdf
Let V be a finite dimensional vector space over F with T element (V, V) and let U_1, ..., Um be
subspace of V that are invariant under T. Prove that U_1 + ... + U_m must also be an invariant
subspace of V under T.
Solution
If
v = u1 + · · · + uN U1 + · · · + UM
with un Un.
Then
Tv = Tu1 + · · · + TuN.
Since each Un is invariant under T,
Tun = Un, so Tv U1 + · · · + UM..
Java programI made this Account.java below. Using the attached cod.pdf
Java program
I made this Account.java below. Using the attached code I need help with 10.7 (Game: ATM
machine)
Use the Account class created in Programming Exercise 9.7 to simulate an ATM machine.
Create ten accounts in an array with id 0, 1, . . . , 9, and initial balance $100.
The system prompts the user to enter an id. If the id is entered incorrectly, ask the user to enter a
correct id.
Once an id is accepted, the main menu is displayed as shown in the sample run.
You can enter a choice 1 for viewing the current balance, 2 for withdrawing money, 3 for
depositing money, and 4 for exiting the main menu.
Once you exit, the system will prompt for an id again. Thus, once the system starts, it will not
stop.
*/
import java.util.Date;
public class Account {
/**
* @param args
*/
private int id=0;
private double balance=0;
private double annualIntrestRate=0;
private Date dateCreated;
public Account() {
super();
}
public Account(int id, double balance) {
super();
this.id = id;
this.balance = balance;
}
public int getId() {
return id;
}
public void setId(int id) {
this.id = id;
}
public double getBalance() {
return balance;
}
public void setBalance(double balance) {
this.balance = balance;
}
public double getAnnualIntrestRate() {
return annualIntrestRate;
}
public void setAnnualIntrestRate(double annualIntrestRate) {
this.annualIntrestRate = annualIntrestRate;
}
public Date getDateCreated() {
return dateCreated;
}
public void setDateCreated(Date dateCreated) {
this.dateCreated = dateCreated;
}
public double getMonthlyInterestRate()
{
return (this.getAnnualIntrestRate()/12);
}
public double getMonthlyInterest()
{
return (getBalance() *getMonthlyInterestRate()/100);
}
public double withDraw(double balance)
{
this.setBalance(this.getBalance()-balance);
return this.getBalance();
}
public double diposite(double balance)
{
this.setBalance(this.getBalance()+balance);
return this.getBalance();
}
public double totalBalance()
{
balance =balance + getMonthlyInterest();
return balance;
}
}
//AccountTest.java
import java.util.Calendar;
import java.util.Date;
import java.util.Scanner;
public class AccountTest {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner sc=new Scanner(System.in);
Account ac=new Account(1,5000.00);
System.out.println(\"Enter the annual intrest rate\");
double intrestRate=sc.nextDouble();
ac.setAnnualIntrestRate(intrestRate);
Date d=new Date();
Calendar currentDate = Calendar.getInstance();
ac.setDateCreated(currentDate.getTime());
System.out.println(\"Date id \"+ac.getDateCreated());
System.out.println(\"Monthly intrest rate is :\"+ac.getMonthlyInterestRate());
System.out.println(\"Monthly intrest is :\"+ac.getMonthlyInterest());
System.out.println(\"Enter Amount for diposite \");
double dipositeAmount=sc.nextDouble();
System.out.println(\"The amount after diposite is :\"+ac.diposite(dipositeAmount));
System.out.println(\"Enter Amount to withdraw :\");
double withdramount= sc.nextDouble.
In the follwoing double bond hydration reaction styrene + water (so.pdf
In the follwoing double bond hydration reaction: styrene + water (solvent) + H2SO4 (reagent) ---
-> 1-phenylethanol, what role does H2SO4 play?
a. it lowers the energy of activation.
b. it will deprotonate water.
c. it makes the reaction less exothermic.
d. it makest the reaction more exothermic.
I know that H2SO4 in this reaction catalyses the hydration of the double bond, but I do not fully
understand why. I believe the answer is a, but would appreciate correction/and or explanation
from someone with a better grasp of OChem! Thanks :)
Solution
a. it lowers the energy of activation
Once the H+ ion is attacking styrene, it will form a carbocation, it is an intermediate and its
activation energy will be less when campred with the starting material..
Indicate whether each of the following items is an asset, liability,.pdf
Indicate whether each of the following items is an asset, liability, or part of owner’s equity.
(a)Accounts receivable
Owner’s EquityLiabilityAsset(b)Salaries and wages payable
Owner’s EquityAssetLiability(c)Equipment
AssetLiabilityOwner’s Equity(d)Supplies
AssetLiabilityOwner’s Equity(e)Owner’s capital
Owner’s EquityAssetLiability(f)Notes payable
Owner’s EquityAssetLiability
Solution
(a) Accounts receivable - Asset
(b) Salaries and wages payable - Liability
(c) Equipment - Asset
(d) Supplies - Asset
(e) Owner’s capital - Owner’s Equity
(f) Notes payable - Liability.
In this project you implement a program such that it simulates the p.pdf
In this project you implement a program such that it simulates the process of repeated attempts to
hit a target with a projectile. The goal is to shoot the projectile within a 1 foot distance from the
target, since such a short miss is accepted as a hit. Your program is responsible for the following
tasks.
Compute the trajectory data of a projectile (such as the time, the maximum height and the
distance as described by the formulas above) for a given launch velocity and a launch angle, in
particular for an initial choice of a 45 degree angle
Determine if the target is within the range for the given launch velocity, that is check if at the
first attempt the distance is sort to the target with more than 1 foot; if so the process is terminated
and then restarted with an increased launch velocity (note that for any velocity the longest range
is attained if the launch angle is of 45 degrees)
Compute the error of a shot (error = projectile range – distance to target)
Check if the error is less than 1 foot in absolute value (the absolute error); if so, notify the user
about the result and terminate the process
Offer the user four chances to modify the launch angle and try to hit the target
Keep track of the smallest absolute error produced by the subsequent attempts; report the best
effort to the user
Analysis and Requirements
Input
Initial input values are
(i) launch velocity (feet/sec)
(ii) distance to the desired target (feet)
(iii) gravitational acceleration (a constant)
Additional input values are the launch angles for the repeated attempts when apply. The angle
must always be in the range of 0.0 – 45.0 degrees.
Distance, velocity and launch angle are solicited from the user on JOptionPane input windows.
Output
Output messages are displayed both on JOptionPane windows and on the console. Every time a
launch has been executed by the program, a report providing the details of the trajectory must be
displayed.
Design
For this project you shall design a single class which contains all the necessary data and
operations. A suggested class name is Projectile. You must decide upon the necessary import(s).
The Projectile class contains the main method, which in turn contains all your code, including
the variable declarations. The main method is responsible for the following tasks:
opens a welcoming window
declares and assigns a named constant for the gravitational acceleration; the value is 32
declares variables (all double) to store projectile data velocity, distance and angle; all initialized
to 0
solicits the input values as explained in the Analysis section, if either of these input is the empty
string or null (Cancel button), the message as shown in Figure 11 displayed and the program
exits; valid input parsed and saved in the relevant variables
computes all the trajectory and output data and saves those in relevant variables (declare and use
the necessary variables as specified in the class description below)
builds up and stores the output messag.
Identify main functions of a proposed internal information system an.pdf
Identify main functions of a proposed internal information system and why they are important to
the business. Include main functions of the System and its importance.
Solution
The internal information system of a business can be classified ito the four major parts:
1. Marketing information system : Marketing information system supports the decision making
regarding the four marketing mix whic are price, product place and promotion. It helps
marketing planning, promoting and sellling the goods and services of the company. It also helps
in identifying the current marketing trends, the various needs and requirements of the customers
to serve them better. Some of the major fuctions of marketing information system are the pricing
decisons and sales forecasting. pricing decisions are important as it will determine the total
revenue generated for the company, sales forcasting is the way of estimating the future.
2. Mnufacturing information system : Information system plays an important role in
manufacturing process. The manufacturing information system includes product design and
engineering, product scheduling, quality control etc.two of the major tools which are used for
product design and engineering are CAD(Computer aided design) and CAE( Computer aided
engineering). Product scheduling ensures that appropriate combination of man material and
machine are provided at the appropiate time for the right production of the goods.
3. accounting and financial information system : The accounting and financial information
system helps in keeping a track of the various transactions of the company. It takes the stock of
the flows of money and others assets in and out of the organization. The various functions of
accounting and financial information system are financial forcasting and planning, financial
control, funds management and internal auditing etc.
4. Human resource information system : The human resource information system performs
various taks such as keeping the track of the employees and their performnaces, fetching the
information to the employees regarding the various benefit palns,helping the managers to
evaluate his subordninates and other employees etc..
If elected officials are assumed to be driven by rational self-intere.pdf
If elected officials are assumed to be driven by rational self-interest, they are likely to: 0 a. have
a profit incentive to act on consumer feedback. Ob. adopt a stance of rational ignorance. O c.
maximize their hours worked. Od. best serve the public interest. O e. maximize their political
support
Solution
Option E. Maximize their political support.
Explanation: The self-interest of an elected official will remain in staying in power for which
they will need the continued political support of their supporters..
I need help with 1 questionYou are working for the NSA and they ha.pdf
I need help with 1 question
You are working for the NSA and they have decided that they want to keep records on every
human being on the planet who is now alive or will be in the next 100 years. If the NSA wants to
use the smallest amount of data possible, and that data can cross bytes, how much storage should
you plan for? Assumptions:
World population is 7.5 billion
It is projected that 15 billion people will be born in the next 100 years
The NSA wants to maintain 10,000 data points per person
Each data point can have a maximum of 50 possible values
The NSA wants to allow for a possible 50% expansion of data points and possible values. They
also want to allow for the possibility that the up to 50% more people than anticipated will be
born in the next 100 years.
Solution
the UN reports that their estimate of World population has 1-2% error. An evaluation of a series
of United Nations population projections between the 1950s and 1990s found that all but one had
a margin of error of less than 4%. Most factors indicate an undercount. World population could
be 7.4 billion or even 7.5 billion now.
High population growth in Nigeria and other African countries but they have the oldest and most
inaccurate Census
* China hiding many second and third children
* Various scientific studies show that assumed decreased fertility in Africa is not happening or
happening more slowly which means a lot more children, so a census with missing people from
ten years ago assumes smaller families but there were more
Countries like Eritrea, South Sudan and the Democratic Republic of the Congo did not conduct
population censuses between 2005 and 2014, as required by the UN for their 2010 round of
projections. This year Angola conducted its first national census in 30 years, Dr Mady Biaye,
Technical Advisor for East and Southern Africa at the United Nations Population Fund told
Africa Check. Nigeria for example has far less accurate population recording systems. Other
countries have not held censuses for decades.
In Nigeria the country’s census figures have been the subject of controversy for decades.
Accusations of rigging date back to the 1950s and have continued unabated under military and
civilian regimes.
These numbers, along with most of what we think of as facts in development, are actually
estimates. We have actual numbers on maternal mortality for just 16% of all births, and on
malaria for about 15% of all deaths. For six countries in Africa, there is basically no information
at all.
The world of development has had an odd double-think about data for decades now. On the one
hand, researchers and others will freely admit to the huge gaps and problems with development
data (indeed, it\'s sometimes hard to get people to stop talking about it). But on the other hand,
these same individuals and institutions have quite big vested interests in downplaying the
unreliability of data.
An academic who has just carried out a complex piece of econometrics based on househo.
I got an answer but dont know how to show it with the correct .pdf
I got an answer but don\'t know how to show it with the correct work. Some correct work would
be greatly appreciated.
Solution
f(x)=x^3+6x
inverval is 1 to 4
x=(4-1)/n=3/n
xi=1+i*3/n
Right riemann sum
Sum (R)= (i=1 to n) f(xi)xi
= (i=1 to n) [[1+i*3/n]^3+6[1+i*3/n]](3/n)
= (i=1 to n) 3/n[1+27i^3/n^3.........]
calculate (its easy)
then find the left riemann sum
xi-1=1+(i-1)*3/n=3i/n-3/n+1
calculate Sum (L)= (i=1 to n) f(x(i-1))x
put limit n--->infinity
if Sum (R)=Sum (L)=some value :).
Gunther dies intestate. The debts of the estate are paid by his a. .pdf
Gunther dies intestate. The debts of the estate are paid by his? a. ?heirs, before the estate’s assets
are distributed. b. ?estate, before its assets are distributed. c. ?heirs, after the estate’s assets are
distributed. d. ?estate, after its assets are distributed.
Solution
Answer : C
ACCORDING TO LAW OF LAND IF A PERSON DIES WITH MAKING ANY WILL I
WOULD NOT DENY HIS LIABILITY TOWARDS CREDITORS HIS LEGAL HEIRS WILL
BE LIABLE TO THE EXTENT THE VALUE OF PROPERTY DISTRIBUTED ,
THE LIABILITY OF HEIRS IS TO THE EXTENT OF VALUE OF PROPERTY INHERITED
THANK YOU HOPE MY OPINION IS USEFULL I.
F varies directly with m and inversely with the square of d. If F = 1.pdf
F varies directly with m and inversely with the square of d. If F = 120 when m = 640 and d = 4.
find F when m = 200 and d = 2. F =
Solution
Dear Student Thank you for using Chegg !! Given F Varies directly with m F
varies inversely with square of d F = K (m/d^2) where K is proportionality constant
F1 120 F2 m1 640 m2 200 d1 4 d2 2 F1 *d1^2 / m1 = F2 *d2^2 / m2
120*4^2/ 640 = F2*2^2/200 3 = F2 / 50 F2 = 150.
Dr Snow could not randomly assign people to drink water from the w.pdf
Dr Snow could not randomly assign people to drink water from the well that he supposed was
the source of cholera so his study was. (a). An experiment (b). Randomization (c). Correlational
(d). Confounding
Dr Snow could not randomly assign people to drink water from the well that he supposed was
the source of cholera so his study was. (a). An experiment (b). Randomization (c). Correlational
(d). Confounding
Solution
Answer is a..
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
More Related Content
More from fathimafancy
State briefly what functions an Engineering Services Department in a.pdf
Some of the major challenges to international expansion include all of the following except:
A. Political Risks
B. Unrelated diversification
C. Economic risks
D. Managerial Risks
Solution
The correct answer is option B.
Conducting business globally is very important and crucial decision made by the business and
require lots of effort and correct decisions in order to make it an effective move. It not only
provide new opportunities for growth and profit but also provide reputation to business globally.
There are several risk and challenges associated with doing business globally and a business
should consider these factors. These aspects are very important to consider when selecting an
international market to enter. They are:-
Unrelated diversification is nothing but the diversification when unrelated product lines and new
markets are added to current business. Example- Clothing manufacturer enters into watch
manufacturing business..
Satellites in geosynchronous orbit have the desirable property of re.pdf
saplinglearning.com O.CHM.111.309A.SP18 Northern Virginia Community College,
Alexandria-CHM 111 - Spring Chlorine Jump to... 2/26/2018 12:00 AM O 3.6/5 ( 2/25/2018
10:17 PM Gradeboo Calculator IncorrectIncarrect -Print -d Periodic Table Question 11 of 13
Map Sapling Learning gas can be prepared in the laboratory by the reaction of hydrochiloric acid
with manganese(iy) oxide: You add 43.3 g of MnO2 to a solution containing 43.7 g of HCI. (a)
What is the limiting reactant? HC (b) What is the theoretical yield of Ch? Number 70.29 CI (c) If
the yield of the reaction is 763%, what is the actual yield of chlorine? Number 53.63 g CI Exit
ePrev ous Give Up & View Souton OCheck Answer ONect about us careers privacy policy e of
use contact us help
Solution
a) according to balanced reaction
4 x 36.5 g HCl reacts with 86.94 g MnO2
43.7 g HCl reacts with 43.7 x 86.94 / 4 x 36.5 = 26.02 g MnO2.
but we have 43.3 g MnO2. so MnO2 present in exess.
limiting reagent = HCl
limiting reagent = HCl
b) 4 x 36.5 g HCl gives 71 g Cl2
43.7 g HCl gives 43.7 x 71 / 4 x 36.5 = 21.25 g
therotical yield of Cl2 = 21.25 g
c) % yield = (actual yield / therotical yield) x 100
76.3 = (actual yield / 21.25) x 100
0.763 = actual yield / 21.25
actual yield = 16.21 g.
Research and discuss an incident where it was discovered that a Remo.pdf
Requirement 1. Determine the maturity date and maturity value of each note. (For each
applicable note, compute interest using a 365-day year. Round to the nearest dollar.) Due date
Date Principal Amount Interest Rate Month/Day Year Maturity value Note (1) Apr. 1 (2) Sep. 30
Term Apr. 12019 20,000 22,000 16,000 13% 5% 11% 1 year 6 months Sep. 302019 Dec. 18
2018 Sep. 19 90 days Requirement 2. Jounalize the entries to establish each Note Receivable and
to record collection of principal and interest at maturity. Include a single adjusting entry on
December 31, 2018, the fiscal year-end, to record accrued interest revenue on any applicable
note. Explanations are not required. Round to the nearest dollar. (Record debits first, then credits.
Exclude explanations from journal entries.) Begin with the jounal entry to establish nate 1 Debit
Credit Date 2018 Apr. 1 Data Table Date Principal Amount Interest Rate Term 1 year 6 months
Note (1) Apr. (2) Sep. 30 20,000 22,000 16,000 13% 5% 11% Jcurnalize the entry to establish
note 2. Debit Credit Sep. 19 90 days Date 2018 Sep. 30 Accounts and Explanation PrintDone
Solution.
Please review the attached casescenario. You are Bill. Feel free to.pdf
Please make sure it works I\'ve been struggling with this and so far every answer I\'ve got back is
wrong. l. Input an integer value altitude and use a loop to write your own graphics program
\'fall.cpp\' that produces a graphic representation of falling object (e.g. circle). An object has
initial downward velocity 0. Each second, it\'s velocity increases by 32 ft/sec Plot the descent of
the falling object. Note that terminal velocity is 174 ft/sec so the object\'s velocity cannot exceed
that speed. Now modify your program to read an integer variable secondstoopen to open a
parachute after n seconds. Assume the velocity decreases by 100 ft/sec after the chute opens until
the downward velocity hits 17 ft/sec. Note that outside the bottom of the loop is the code for
where the chutist has landed put a message there. (use C++ code please)
Solution
#include
#include
using namespace std;
void fuel(float & dist);
void distance(float dist, float & time, float & time2 );
void Altitude(float time, float time2, float altlevel);
void Climb_Descend(float altlevel);
int main(int argc, char *argv[])
{
float altlevel;
float dist;
int fuelcon;
float speed=300, altspeed;
char choice;
bool OK;
do
{
fuel(dist); //calls
distance(dist, speed, altspeed);
Altitude(speed, altspeed, altlevel);
Climb_Descend (altlevel);
cout <<\"do you want to calaculate again?\"<>choice;
if(choice==\'Y\' || choice==\'y\')
{
OK=true;
}
else
OK=false;
}
while (OK==true);
system(\"PAUSE\");
return EXIT_SUCCESS;
}
void fuel (float & dist) //function
{
cout<<\"Enter the distance of flight \"<>dist;
}
void distance(float dist, float & time, float & time2)
{
time = dist/300; // Speed is constant 300mph
time2 = (time - 0.30)*60; //30 minutes is needed to get to the top level
cout<< \" the flight will last \"<.
Please make sure it works Ive been struggling with this and so far.pdf
Please help with this MIPS Assembly Language question! The task for a function named foo is
to increase the return value of the function bar (in register $v0) by 1 and return the result back to
the caller. The code of the function_foo is shown below: _foo: jal_bar addi $v0, $v0, 1 jr $ra
Assume that the function bar has been implemented. What is wrong with the function_foo
above? a. Nothing is wrong. b. Function _foo cannot use $v0. c. It will not go back to the
caller. d. The last instruction should be j $ra.
Solution
_foo: jal _bar //Jumps to the calculated address, and stored the return address in $ra.
addi $v0, $v0, 1 //Adds 1 to the value in $v0.
jr $ra //Jumps to address in register $ra.
So, nothing wrong with this function.
The answer is: a. Nothing is wrong..
Please explain the physiological mechanism for enlarged lymph nodes..pdf
Please check. I am trying to fix the two errors but I don\'t know what I\'m doing wrong.
#include
#include
int main() {
char choice; // choice of user
int percentArray[50];
int percentage;
int count=0;
char LetterGrade;
for (count=0; count<50; count++){ //for loop to read the grades till array size
printf(\"-------------------Enter percentage---------------\ Add marks(a) \ Quit(q) \ \")
scanf choice
if(choice == \'a\'){ //if user choice is a, then read the grade
printf \"Enter grade:\";
scanf percentage;
percentArray[count] = percentage; //add the grade to array
}
if(choice == \'q\'){ //if the user choice is q, then exit the loop
break;
}
}
printf \"Grades are: \"
for (int i=0; i
Solution
#include
#include
int main()
{
char choice; // choice of user
int percentArray[50];
int percentage;
int count=0,i;
//char LetterGrade;
for(count=0; count<50; count++)
{ //for loop to read the grades till array size
printf(\"-------------------Enter percentage---------------\ Add marks(a) \ Quit(q) \ \");
scanf(\"%c\",&choice);
if(choice == \'a\')
{ //if user choice is a, then read the grade
printf( \"Enter grade:\");
scanf(\"%d\", &percentage);
percentArray[count] = percentage; //add the grade to array
}
if(choice == \'q\')
{ //if the user choice is q, then exit the loop
break;
}
}
printf(\"Grades are: \");
for(i=0; i.
Mathematical Statistics.....Could answer be typed (is there any link.pdf
Mathematical Statistics.....Could answer be typed (is there any link between the two and if so can
you discuss them)
Discuss the link, if any, between linear transformations and calculating probabilities.
Solution
Mathematical statistics
the application of mathematics to statistics
the answer can be uploaded in any manner as long as it is neatly uploaded and legible
or any mathematical tool can also be used to upload the answer or you can simply type your text.
Modify the Stack class given in the book in order for it to store do.pdf
Modify the Stack class given in the book in order for it to store double numbers (instead of void*
pointers). Add a destructor that will delete all the stack by making calls to pop(), and for each
element destroyed the element will be printed to the output. Now add two constructors: the
default one that will create an empty stack, and another one that will receive an integer n and will
build a stack of n elements, such that the first element is 1.0, and the next ones are incremented
of 0.1. Upload your Stack class. It will be then tested for correctness with stacks.cpp.
Stack.h:
//: C05:Stack2.h
// Nested structs via linked list
#ifndef STACK2_H
#define STACK2_H
class Stack
{
struct Link {
void* data;
Link* next;
void initialize(void* dat, Link* nxt);
}* head;
public:
void initialize();
void push(void* dat);
void* peek();
void* pop();
void cleanup();
};
#endif // STACK2_H ///:~
Stack.cpp:
Sample Output:
2 1.5 1 0.5
1.3 1.2 1.1 1 end.
Solution
Hi, Please find my implemntation;
Please let me know in case of any issue.
//: C05:Stack2.h
// Nested structs via linked list
#ifndef STACK2_H
#define STACK2_H
#include
#include
using namespace std;
class Stack
{
struct Link {
double data;
Link* next;
void initialize(double dat, Link* nxt){
data = dat;
next = nxt;
}
};
Link *head;
public:
Stack(){
head = NULL;
}
Stack(int n){
for(double i=1; i<=n; i= i+ 0.1){
push(i);
}
}
~Stack(){
if(head != NULL){
while(head != NULL){
cout<data<<\" \";
Link *temp = head;
head = head->next;
delete temp;
}
cout<initialize(dat, head);
head = newNode;
}
double peek(){
if(head == NULL){
cout<<\"Stack is Empty!!!\"<data;
}
double pop(){
double d = -1;
if(head != NULL){
Link *temp = head;
d = temp->data;
head = head->next;
delete temp;
}else{
cout<<\"Stack is Empty!!!\"<.
Let V be a finite dimensional vector space over F with T element (V,.pdf
Let V be a finite dimensional vector space over F with T element (V, V) and let U_1, ..., Um be
subspace of V that are invariant under T. Prove that U_1 + ... + U_m must also be an invariant
subspace of V under T.
Solution
If
v = u1 + · · · + uN U1 + · · · + UM
with un Un.
Then
Tv = Tu1 + · · · + TuN.
Since each Un is invariant under T,
Tun = Un, so Tv U1 + · · · + UM..
Java programI made this Account.java below. Using the attached cod.pdf
Java program
I made this Account.java below. Using the attached code I need help with 10.7 (Game: ATM
machine)
Use the Account class created in Programming Exercise 9.7 to simulate an ATM machine.
Create ten accounts in an array with id 0, 1, . . . , 9, and initial balance $100.
The system prompts the user to enter an id. If the id is entered incorrectly, ask the user to enter a
correct id.
Once an id is accepted, the main menu is displayed as shown in the sample run.
You can enter a choice 1 for viewing the current balance, 2 for withdrawing money, 3 for
depositing money, and 4 for exiting the main menu.
Once you exit, the system will prompt for an id again. Thus, once the system starts, it will not
stop.
*/
import java.util.Date;
public class Account {
/**
* @param args
*/
private int id=0;
private double balance=0;
private double annualIntrestRate=0;
private Date dateCreated;
public Account() {
super();
}
public Account(int id, double balance) {
super();
this.id = id;
this.balance = balance;
}
public int getId() {
return id;
}
public void setId(int id) {
this.id = id;
}
public double getBalance() {
return balance;
}
public void setBalance(double balance) {
this.balance = balance;
}
public double getAnnualIntrestRate() {
return annualIntrestRate;
}
public void setAnnualIntrestRate(double annualIntrestRate) {
this.annualIntrestRate = annualIntrestRate;
}
public Date getDateCreated() {
return dateCreated;
}
public void setDateCreated(Date dateCreated) {
this.dateCreated = dateCreated;
}
public double getMonthlyInterestRate()
{
return (this.getAnnualIntrestRate()/12);
}
public double getMonthlyInterest()
{
return (getBalance() *getMonthlyInterestRate()/100);
}
public double withDraw(double balance)
{
this.setBalance(this.getBalance()-balance);
return this.getBalance();
}
public double diposite(double balance)
{
this.setBalance(this.getBalance()+balance);
return this.getBalance();
}
public double totalBalance()
{
balance =balance + getMonthlyInterest();
return balance;
}
}
//AccountTest.java
import java.util.Calendar;
import java.util.Date;
import java.util.Scanner;
public class AccountTest {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner sc=new Scanner(System.in);
Account ac=new Account(1,5000.00);
System.out.println(\"Enter the annual intrest rate\");
double intrestRate=sc.nextDouble();
ac.setAnnualIntrestRate(intrestRate);
Date d=new Date();
Calendar currentDate = Calendar.getInstance();
ac.setDateCreated(currentDate.getTime());
System.out.println(\"Date id \"+ac.getDateCreated());
System.out.println(\"Monthly intrest rate is :\"+ac.getMonthlyInterestRate());
System.out.println(\"Monthly intrest is :\"+ac.getMonthlyInterest());
System.out.println(\"Enter Amount for diposite \");
double dipositeAmount=sc.nextDouble();
System.out.println(\"The amount after diposite is :\"+ac.diposite(dipositeAmount));
System.out.println(\"Enter Amount to withdraw :\");
double withdramount= sc.nextDouble.
In the follwoing double bond hydration reaction styrene + water (so.pdf
In the follwoing double bond hydration reaction: styrene + water (solvent) + H2SO4 (reagent) ---
-> 1-phenylethanol, what role does H2SO4 play?
a. it lowers the energy of activation.
b. it will deprotonate water.
c. it makes the reaction less exothermic.
d. it makest the reaction more exothermic.
I know that H2SO4 in this reaction catalyses the hydration of the double bond, but I do not fully
understand why. I believe the answer is a, but would appreciate correction/and or explanation
from someone with a better grasp of OChem! Thanks :)
Solution
a. it lowers the energy of activation
Once the H+ ion is attacking styrene, it will form a carbocation, it is an intermediate and its
activation energy will be less when campred with the starting material..
Indicate whether each of the following items is an asset, liability,.pdf
Indicate whether each of the following items is an asset, liability, or part of owner’s equity.
(a)Accounts receivable
Owner’s EquityLiabilityAsset(b)Salaries and wages payable
Owner’s EquityAssetLiability(c)Equipment
AssetLiabilityOwner’s Equity(d)Supplies
AssetLiabilityOwner’s Equity(e)Owner’s capital
Owner’s EquityAssetLiability(f)Notes payable
Owner’s EquityAssetLiability
Solution
(a) Accounts receivable - Asset
(b) Salaries and wages payable - Liability
(c) Equipment - Asset
(d) Supplies - Asset
(e) Owner’s capital - Owner’s Equity
(f) Notes payable - Liability.
In this project you implement a program such that it simulates the p.pdf
In this project you implement a program such that it simulates the process of repeated attempts to
hit a target with a projectile. The goal is to shoot the projectile within a 1 foot distance from the
target, since such a short miss is accepted as a hit. Your program is responsible for the following
tasks.
Compute the trajectory data of a projectile (such as the time, the maximum height and the
distance as described by the formulas above) for a given launch velocity and a launch angle, in
particular for an initial choice of a 45 degree angle
Determine if the target is within the range for the given launch velocity, that is check if at the
first attempt the distance is sort to the target with more than 1 foot; if so the process is terminated
and then restarted with an increased launch velocity (note that for any velocity the longest range
is attained if the launch angle is of 45 degrees)
Compute the error of a shot (error = projectile range – distance to target)
Check if the error is less than 1 foot in absolute value (the absolute error); if so, notify the user
about the result and terminate the process
Offer the user four chances to modify the launch angle and try to hit the target
Keep track of the smallest absolute error produced by the subsequent attempts; report the best
effort to the user
Analysis and Requirements
Input
Initial input values are
(i) launch velocity (feet/sec)
(ii) distance to the desired target (feet)
(iii) gravitational acceleration (a constant)
Additional input values are the launch angles for the repeated attempts when apply. The angle
must always be in the range of 0.0 – 45.0 degrees.
Distance, velocity and launch angle are solicited from the user on JOptionPane input windows.
Output
Output messages are displayed both on JOptionPane windows and on the console. Every time a
launch has been executed by the program, a report providing the details of the trajectory must be
displayed.
Design
For this project you shall design a single class which contains all the necessary data and
operations. A suggested class name is Projectile. You must decide upon the necessary import(s).
The Projectile class contains the main method, which in turn contains all your code, including
the variable declarations. The main method is responsible for the following tasks:
opens a welcoming window
declares and assigns a named constant for the gravitational acceleration; the value is 32
declares variables (all double) to store projectile data velocity, distance and angle; all initialized
to 0
solicits the input values as explained in the Analysis section, if either of these input is the empty
string or null (Cancel button), the message as shown in Figure 11 displayed and the program
exits; valid input parsed and saved in the relevant variables
computes all the trajectory and output data and saves those in relevant variables (declare and use
the necessary variables as specified in the class description below)
builds up and stores the output messag.
Identify main functions of a proposed internal information system an.pdf
Identify main functions of a proposed internal information system and why they are important to
the business. Include main functions of the System and its importance.
Solution
The internal information system of a business can be classified ito the four major parts:
1. Marketing information system : Marketing information system supports the decision making
regarding the four marketing mix whic are price, product place and promotion. It helps
marketing planning, promoting and sellling the goods and services of the company. It also helps
in identifying the current marketing trends, the various needs and requirements of the customers
to serve them better. Some of the major fuctions of marketing information system are the pricing
decisons and sales forecasting. pricing decisions are important as it will determine the total
revenue generated for the company, sales forcasting is the way of estimating the future.
2. Mnufacturing information system : Information system plays an important role in
manufacturing process. The manufacturing information system includes product design and
engineering, product scheduling, quality control etc.two of the major tools which are used for
product design and engineering are CAD(Computer aided design) and CAE( Computer aided
engineering). Product scheduling ensures that appropriate combination of man material and
machine are provided at the appropiate time for the right production of the goods.
3. accounting and financial information system : The accounting and financial information
system helps in keeping a track of the various transactions of the company. It takes the stock of
the flows of money and others assets in and out of the organization. The various functions of
accounting and financial information system are financial forcasting and planning, financial
control, funds management and internal auditing etc.
4. Human resource information system : The human resource information system performs
various taks such as keeping the track of the employees and their performnaces, fetching the
information to the employees regarding the various benefit palns,helping the managers to
evaluate his subordninates and other employees etc..
If elected officials are assumed to be driven by rational self-intere.pdf
If elected officials are assumed to be driven by rational self-interest, they are likely to: 0 a. have
a profit incentive to act on consumer feedback. Ob. adopt a stance of rational ignorance. O c.
maximize their hours worked. Od. best serve the public interest. O e. maximize their political
support
Solution
Option E. Maximize their political support.
Explanation: The self-interest of an elected official will remain in staying in power for which
they will need the continued political support of their supporters..
I need help with 1 questionYou are working for the NSA and they ha.pdf
I need help with 1 question
You are working for the NSA and they have decided that they want to keep records on every
human being on the planet who is now alive or will be in the next 100 years. If the NSA wants to
use the smallest amount of data possible, and that data can cross bytes, how much storage should
you plan for? Assumptions:
World population is 7.5 billion
It is projected that 15 billion people will be born in the next 100 years
The NSA wants to maintain 10,000 data points per person
Each data point can have a maximum of 50 possible values
The NSA wants to allow for a possible 50% expansion of data points and possible values. They
also want to allow for the possibility that the up to 50% more people than anticipated will be
born in the next 100 years.
Solution
the UN reports that their estimate of World population has 1-2% error. An evaluation of a series
of United Nations population projections between the 1950s and 1990s found that all but one had
a margin of error of less than 4%. Most factors indicate an undercount. World population could
be 7.4 billion or even 7.5 billion now.
High population growth in Nigeria and other African countries but they have the oldest and most
inaccurate Census
* China hiding many second and third children
* Various scientific studies show that assumed decreased fertility in Africa is not happening or
happening more slowly which means a lot more children, so a census with missing people from
ten years ago assumes smaller families but there were more
Countries like Eritrea, South Sudan and the Democratic Republic of the Congo did not conduct
population censuses between 2005 and 2014, as required by the UN for their 2010 round of
projections. This year Angola conducted its first national census in 30 years, Dr Mady Biaye,
Technical Advisor for East and Southern Africa at the United Nations Population Fund told
Africa Check. Nigeria for example has far less accurate population recording systems. Other
countries have not held censuses for decades.
In Nigeria the country’s census figures have been the subject of controversy for decades.
Accusations of rigging date back to the 1950s and have continued unabated under military and
civilian regimes.
These numbers, along with most of what we think of as facts in development, are actually
estimates. We have actual numbers on maternal mortality for just 16% of all births, and on
malaria for about 15% of all deaths. For six countries in Africa, there is basically no information
at all.
The world of development has had an odd double-think about data for decades now. On the one
hand, researchers and others will freely admit to the huge gaps and problems with development
data (indeed, it\'s sometimes hard to get people to stop talking about it). But on the other hand,
these same individuals and institutions have quite big vested interests in downplaying the
unreliability of data.
An academic who has just carried out a complex piece of econometrics based on househo.
I got an answer but dont know how to show it with the correct .pdf
I got an answer but don\'t know how to show it with the correct work. Some correct work would
be greatly appreciated.
Solution
f(x)=x^3+6x
inverval is 1 to 4
x=(4-1)/n=3/n
xi=1+i*3/n
Right riemann sum
Sum (R)= (i=1 to n) f(xi)xi
= (i=1 to n) [[1+i*3/n]^3+6[1+i*3/n]](3/n)
= (i=1 to n) 3/n[1+27i^3/n^3.........]
calculate (its easy)
then find the left riemann sum
xi-1=1+(i-1)*3/n=3i/n-3/n+1
calculate Sum (L)= (i=1 to n) f(x(i-1))x
put limit n--->infinity
if Sum (R)=Sum (L)=some value :).
Gunther dies intestate. The debts of the estate are paid by his a. .pdf
Gunther dies intestate. The debts of the estate are paid by his? a. ?heirs, before the estate’s assets
are distributed. b. ?estate, before its assets are distributed. c. ?heirs, after the estate’s assets are
distributed. d. ?estate, after its assets are distributed.
Solution
Answer : C
ACCORDING TO LAW OF LAND IF A PERSON DIES WITH MAKING ANY WILL I
WOULD NOT DENY HIS LIABILITY TOWARDS CREDITORS HIS LEGAL HEIRS WILL
BE LIABLE TO THE EXTENT THE VALUE OF PROPERTY DISTRIBUTED ,
THE LIABILITY OF HEIRS IS TO THE EXTENT OF VALUE OF PROPERTY INHERITED
THANK YOU HOPE MY OPINION IS USEFULL I.
F varies directly with m and inversely with the square of d. If F = 1.pdf
F varies directly with m and inversely with the square of d. If F = 120 when m = 640 and d = 4.
find F when m = 200 and d = 2. F =
Solution
Dear Student Thank you for using Chegg !! Given F Varies directly with m F
varies inversely with square of d F = K (m/d^2) where K is proportionality constant
F1 120 F2 m1 640 m2 200 d1 4 d2 2 F1 *d1^2 / m1 = F2 *d2^2 / m2
120*4^2/ 640 = F2*2^2/200 3 = F2 / 50 F2 = 150.
Dr Snow could not randomly assign people to drink water from the w.pdf
Dr Snow could not randomly assign people to drink water from the well that he supposed was
the source of cholera so his study was. (a). An experiment (b). Randomization (c). Correlational
(d). Confounding
Dr Snow could not randomly assign people to drink water from the well that he supposed was
the source of cholera so his study was. (a). An experiment (b). Randomization (c). Correlational
(d). Confounding
Solution
Answer is a..
More from fathimafancy (20)
State briefly what functions an Engineering Services Department in a.pdf
State briefly what functions an Engineering Services Department in a.pdf
Satellites in geosynchronous orbit have the desirable property of re.pdf
Satellites in geosynchronous orbit have the desirable property of re.pdf
Research and discuss an incident where it was discovered that a Remo.pdf
Research and discuss an incident where it was discovered that a Remo.pdf
Please review the attached casescenario. You are Bill. Feel free to.pdf
Please review the attached casescenario. You are Bill. Feel free to.pdf
Please make sure it works Ive been struggling with this and so far.pdf
Please make sure it works Ive been struggling with this and so far.pdf
Please explain the physiological mechanism for enlarged lymph nodes..pdf
Please explain the physiological mechanism for enlarged lymph nodes..pdf
Mathematical Statistics.....Could answer be typed (is there any link.pdf
Mathematical Statistics.....Could answer be typed (is there any link.pdf
Modify the Stack class given in the book in order for it to store do.pdf
Modify the Stack class given in the book in order for it to store do.pdf
Let V be a finite dimensional vector space over F with T element (V,.pdf
Let V be a finite dimensional vector space over F with T element (V,.pdf
Java programI made this Account.java below. Using the attached cod.pdf
Java programI made this Account.java below. Using the attached cod.pdf
In the follwoing double bond hydration reaction styrene + water (so.pdf
In the follwoing double bond hydration reaction styrene + water (so.pdf
Indicate whether each of the following items is an asset, liability,.pdf
Indicate whether each of the following items is an asset, liability,.pdf
In this project you implement a program such that it simulates the p.pdf
In this project you implement a program such that it simulates the p.pdf
Identify main functions of a proposed internal information system an.pdf
Identify main functions of a proposed internal information system an.pdf
If elected officials are assumed to be driven by rational self-intere.pdf
If elected officials are assumed to be driven by rational self-intere.pdf
I need help with 1 questionYou are working for the NSA and they ha.pdf
I need help with 1 questionYou are working for the NSA and they ha.pdf
I got an answer but dont know how to show it with the correct .pdf
I got an answer but dont know how to show it with the correct .pdf
Gunther dies intestate. The debts of the estate are paid by his a. .pdf
Gunther dies intestate. The debts of the estate are paid by his a. .pdf
F varies directly with m and inversely with the square of d. If F = 1.pdf
F varies directly with m and inversely with the square of d. If F = 1.pdf
Dr Snow could not randomly assign people to drink water from the w.pdf
Dr Snow could not randomly assign people to drink water from the w.pdf
Recently uploaded
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Instructions for Submissions thorugh G- Classroom.pptx
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
Digital Tools and AI for Teaching Learning and Research
This Presentation in details discusses on Digital Tools and AI for Teaching Learning and Research
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
The approach at University of Liverpool.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Thesis Statement for students diagnonsed withADHD.ppt
Presentation required for the master in Education.
Overview on Edible Vaccine: Pros & Cons with Mechanism
This ppt include the description of the edible vaccine i.e. a new concept over the traditional vaccine administered by injection.
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
The Roman Empire A Historical Colossus.pdf
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Acetabularia Information For Class 9 .docx
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Palestine last event orientationfvgnh .pptx
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Biological Screening of Herbal Drugs in detailed.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Recently uploaded (20)
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Instructions for Submissions thorugh G- Classroom.pptx
Instructions for Submissions thorugh G- Classroom.pptx
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
Digital Tools and AI for Teaching Learning and Research
Digital Tools and AI for Teaching Learning and Research
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk - How can education support child empowerment.pptx
Thesis Statement for students diagnonsed withADHD.ppt
Thesis Statement for students diagnonsed withADHD.ppt
Overview on Edible Vaccine: Pros & Cons with Mechanism
Overview on Edible Vaccine: Pros & Cons with Mechanism
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
multiple choiceAssuming that the probability for each shot is .pdf
- 1. multiple choice Assuming that the probability for each shot is independent, how many points, on average, can jenny expect to make when she shoots a one-and-one ( when she only gets a second shot if she makes the first)? A. .96 B. 1 C. 2 D. .36 E. 0 Solution Average = 1 × P( she makes the first shot but misses the second shot) + 2× P( she makes both the shots) Average = 1× 0.6 × 0.4 + 2× 0.6 × 0.6 = 0.96