This document provides personal and professional details about Mostafa Abd El-Sadek Mohamed. It includes his contact information, education qualifications, languages, computer skills, areas of experience and skills, practical training, and work history from 2004 to present in maintenance engineering roles for pharmaceutical and other industries. The document requests consideration for full-time positions in pharmaceutical engineering, electrical engineering, or projects management, with 15 years of relevant experience and availability to start work within 2 weeks.

1. Mostafa Abd El-Sadek Mohamed
Personal Information :
Date of birth
Address
Mobile
E- Mail
Marital Status
Military Services
Nationality
Religion
Driving license
 7/4/1979
 Megawra #54 -10th
Ramadan City
 0122 8769450 - 01001688771
 mostafasadek79@yahoo.com
 Married
 Completed
 Egyptian
 Moslem
 Valid
Qualification
 Degree: B.Sc. of Electronic Engineering
 Major: Industrial Electronics & Automatic Control Engineering.
 Faculty of Electronic Engineering (Minouf)
 Minoufia University
 Graduation: May 2001.
 Project: PLC. Application & PID Control.
Langauges :
English
Arabic
: Very Good Command of English
: Mother Tongue
Computer Skills
Microsoft® Office
Internet
AutoCAD
C ++ Language

2. Experience Fields & skills :
 Preventive Maintenance & Troubleshooting and ability to Upgrade
Ectromechanical system for wide variety of Production lines , Machines ,
Equipments and Units :
 HVAC units ( AHUs – Chillers – LAFS – Cold stores - Exhaust fans – DX units,
all units Controlled by BMS and I desigin & Install & Program BMS system .
 Water plant of purified water and water for injection (WFI) controlled by PLC &
SCADA system.
 Utility Equipments (Air compressors, Diesel Generators, Steam Boilers, Fire
fighting system, Nitrogen generatorsa nd City water pumps.)
 Syrup production line ( Full automatic preparation tanks , Air washing machine ,
Filling machine ,Capping machine, Labeling machine , Full automatic packaging
machine )
 Solid production machines (Coating, Blister, Tablet press, Mixers, Sieve
Equipment, Capsol filling, Fluid Bed Dryer (FBD), Sachet filling machine and
Automatic CIP &WIP Eqipments).
 Sterile Powder filling line (Vail washing machine, Sterilizing & Depyrogenation
Tunnel, Powder filling machine, Crimping machine, Labelling machine, Fully
automatic packaging machine.
 Sterile liquid lines (Ampule and vail washing, Sterilizing & Depyrogenation
Tunnel, liquid filling and sealing machine, Crimping and labeling machines.
 Eye drops production line (automatic preparation tanks by SCADA system ,
Filling Dropper Capping machine, Labeling machine ,Fully automatic packaging
machine )
 Autocalves and other sterilization equipments.
 Bottelpack® Blow-Fill-Seal Machines – Rommelag, Leak Test machine and WFI.
Ampoules labelling machine.
 Good programmer and installation of PLC, HMI, and SCADA on different
application and machines & Maintenance all machines Controlled by PLC.
 Good experience of Electrical maintanance, Mechanical maintanance,
Pneumatics systems maintanance and hydrolic systems maintenance.
 Experience in Commissioning and Startup machines and Execution of ( FAT,
SAT, IQ, OQ, PQ ) Protcols.
 Good Experience of Electrical and Mechanical maintenance for LAP
equipments
Practical Training:
 PLC
 HMI
 SCADA
 Validation
 Soft skills
 Chillers
o Siemens - Fatek – LG - Omron – Mitsubishi
o Hitech- EasyView- LG – WINCC- Omron –Mitsubishi
o DAQ-Factory – WINCC
o Computer system validation
o Communication skills ,Project manegment
o LG Absorbition Chiller

3. Work Experience:
From 1/2014
To Present
From 6/2012
To 12014 :-
“Maintainance Manager”
RAMEDA Pharmaceuticals – 6th
October
i. Leading maintenance team as “Maintenance Manager”
(Five Engineers and Thirty technicians).
ii. Preparing preventive maintenance plan
iii. Collecting all data about job scope to plans urgent
Corrective, Preventive and Predictive Maintenance Work
Orders by coordinate with planning section.
iv. Request spare parts, materials tools after inspect
available in workshop and stores to Purchase it.
v. Prepare for repairs, overhauls and shutdown plans to
minimize the maintenance times and cost.
vi. Prepare training plan for technicians and engineers
according to technical requirements
vii. Coordinates all maintenance activities with production
plants to guide and supervises the multi-craft
maintenance teams.
viii. All activity has done on all Production lines, Utilitys
equipments, HVAC units, Water plant.
ix. Co- Operation with projects mangment to Upgrading
Four areas to Pass the audit of the Egyptian Ministry of
Health
x. Dealing with audits requirements and details
xi. Ensuring that Working under safety regulations
xii. ADD some Modification to machines to improve the
machines proformance and productivity.
“ Production Maintainance and Projects Section head”
EIMC United Pharmaceuticals “EUP” – Bader City
 Direct on mechanical maintenance In addition to
Responsibility on overall electrical maintanence
 Implementation of projects such as :
i. Sterile areas SCADA system to monitoring Room’s
Diffreintial pressure and Data Loging and alarming.
ii. Modification of Crimping machine to detect raising of
Rupper stopper.
iii. Continuous Particulate Counters system installation.
iv. FAT of solid line in india and SAT in EIMC
v. “STILMAS “Water plant electrovalve modification
vi. Plant Extention for Solids and Packaging area (civil
work , Clean partition, Lighting and HVAC & BMS
system)

4. From 5/2010
To 5/2012:
From 11/2007
To 5/2010:
Electrical Section Head
EIMC United Pharmaceuticals “EUP” – Bader City
i. Directs, supervise the maintenance & repair of overall
electrical control system & instrument equipments.
ii. Implement electrical maintenance activates in different
areas of the plant.
iii. Provide of the monthly reports and ensuring the safety
regulations and standards are maintained & plan
schedule planned maintenance work of plant ,
equipment and machinery to improve the proformance
and productivity .
Automation Projects Manager
Industrial Systems for consultancy engineering Co.
i. Supervision on Automation projects and leadership the
Team works to complete projects.
ii. Overcome the technical difficulties for engineers in the
field
iii. Coordination between departments on the one hand
and Customer on the other to complete the project
iv. Preview the projects site and Determinde the Projects
compounents and quotations.
v. Study the new projects to planning and do the time
schedule.
vi. Study the new automation technologies to use in
projects
vii. Lead automation training department and works as
Automation instructor.
From: 52004
To :112007
Automation Projects Engineer
Industrial Systems for consultancy engineering Co.
i. Modifying and upgrading of machines with
conventional control by PLC and Touch screen and
SCADA In many applications and industrys such as
Filling machines , Packaging machines, Injection
moulding machines, Textile machines, Chemicals and
Pharmaceuticals prepration & filling line &Sterilization
autoclaves & Coating machines , Cutting and
positioning machines in Metallic industries , Chillers ,
Air compressors, installation and programming BMS
by SCADA system.
ii. Design and maintenance of low voltage panels and
Conventional Control Circuits.
iii. installation and maintenance of all automation devices
and istrumintation

5. Availability and Job Requested
Career objective
Availability and Job Requested
From :1/2003
To :5/2004:
Maintenance Engineer
Solimar Company, sharminning in resort
Maintenance and design of control circuit, electronic cards,
electrical devices, AC generators
From : 4/2002 –
To :1/2003:
Maintenance Engineer
Army forces
maintenance of electronic cards, electrical devices, AC
generators
Experience: 15 years
To contribute relevent experience and education background to my working
field.
Availability:
I am able to start work after 2 weeks from
announcement
As: Full Time
Job field:
i. Pharmaceutical Engineering and projects
Management,
ii. Electrical Engineering and projects mangment
Job location: Egypt- Arab Countries