Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved)

Monarch Transducers
And Weighing Systems
3065 Tiffany Dr.  Mira Loma, CA 91752
Cel: 951-729-9262
Email: monarch.transducers@gmail.com
Web: monarch-transducers.com
2017 CATALOG for Load Cells And
Weighing Assemblies
NOTE: PRICES AND PART NUMBERS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
CUSTOMERS ARE RESPONSIBLE FOR ALL FREIGHT CHARGES.
SUBSTITUTIONS WILL NOT BE MADE WITHOUT CUSTOMERS
PERMISSION OR APPROVAL
January 1, 2017
Hello, you now have Monarch Transducers & Weighing Systems very first Catalog for Load Cells and Weighing assemblies. These prices are not for end users
or the public
Monarch Transducers & Weighing Systems represents many high end manufacturers here in the USA, if you are looking for a particular product we will find it
and if we cannot then it has not been invented.
Hola aquí tiene por primera vez el Catálogo de Monarch Transducers and Weighing Systems para céldas de carga y montajes. Estos precios no son para el
público o el usuario
Monarch Transducers and Weighing Systems representa muchos fabricantes de gama alta aquí en los EE.UU., si usted está buscando un producto en
particular nos encontraremos con él y si no podemos, entonces no se ha inventado.
Companies we represent are/Companias que representamos Specialty Products/Productos Especiales
ADAM EQUIPMENT, INC. > www.adamequipment.com
Analytical Scales
1800loadcell/Load Cell Central > www.800loadcells.com
Load Cells+
Basculas Poise, LLC, > www.basculaspoise.com
Indicators
Digistar International > www.digi-star.com
Manufacturers of load cells for the Agriculture Industry, such as the
“Pumpkin Canister” and Weigh-bar onboard Load cell
COTI GLOBAL Sensors > www.cotiglobal.com
Canister, S Type, Single ended and Double ended Shear Beams Single point Load Cells & Mounts+
One of the Largest Lines of load cells in the Industry.
FLINTEC > www.flintec.com
Load Cells, Sensors +
LW MEASUREMENT > www.lwmweasurement.com
Load Cells and Scales
FUTEK > www.futek.com
Advanced Sensor technology Special Transducers and Load
Cells
OPTIMA SCALE > www.optimascale.com / www-optimasensors.com
Floor, Pallet Bench, Analytical Drum, Crane Axle Tension Livestock, Scales+, Indicators,
Scoreboards, Load Cells & Mounts
Group Four Transducers, Inc. > www.groupfourtransducers.com
Load Cells, Digital Indicators and Process Controllers
Richards Scale > www.scalepro.com
Explosion proof Indicators, Load cell simulators, specialty jboxes+
Intelligent Weighing Technology > www.intelligentwt.com
Lab Balances, Industrial Scales +
Minebea Intec > www.minebea-intec.com
The Sartorius Industrial (Sartorius Intec) products in the Industrial Scale, Tank and Hopper and
Inspection product lines are now branded as “Minebea Intec”. Minebea purchased all of
Sartorius’ industrial scale assets in 2015, including their manufacturing facilities in Germany
Interface > www.interfaceforce.com
Load cells for calibrations and specialty weighing projects
Scale Warehouse and More > www.scalewarehouseandmore.com
Scales+
Sentran > www.sentran.com
Generic and specialty load cells
Scale Trader > www.scaletrader.net
Broker new & Used Truck Scales+
Siemens > www.siemens/weighing.com
Specialty Load cells
Transcell > www.transcell.com
Indicators and Load cells
Transducers Techniques > www.transducerstechniques.com
Offers a complete line of load cells and sensors
SCALETRON > www.scaletron.com
SiloWeigh systems with Silex sensors for silo batch Weighing
SECA > www.seca.com
Medical Measuring Systems and Scales
Measurement Specialists and National Scale Technology > www.national-scale.com
National Scale Technology is a load cell manufacturer, producing force measurement devices
from 1lb. to 10,000,000lbs. Capacity. Ambient temperatures to 585°F can be accommodated.
Calibrations to 8,000,000lbs. Force can be performed, with direct traceability to NIST.
TRANSDUCERS TECHNIQUES > www. transducertechniques.com
Transducer Techniques manufactures a complete line of Load Cells, Torque
Sensors,
SCALETRON INDUSTRIES LTD. > www.scaletronscales.com
Scaletron is a leading manufacturer of corrosion resistant electronic digital and mechanical scales
and accessories
SEKO FORKLIFT SCALE > www.sekoforklift scales.com
Forklift Scale weigh module kits. Create your own Custom/Proprietary
Forklift Scales! Just add your own Scale Indicator and Custom Enhancements
We are located in/Estamos ubicados en:
Mira Loma, CA 91752 and we can ship UPS as late as 4PM PT (located 50 miles East of Downtown Los Angeles, CA/Estamos ubicados 50 Millas
del centro de Los Ángeles, CA) / Lo más tarde que podemos embarcar es a las 4PM PT.
All product is drop shipped from the manufacturer of your choosing. / Todo producto es enviado del fabricante de su elección
So let me know if I can be of service to you and your Company / Estamos a sus ordenes a usted e su compania.
Best regards/Saludos muy cordiales,
ISWM MEMBER SINCE 1990
-Providing You The Best In Weighing Solutions-
<PAGE 1>

Monarch Transducers
Cel: 951-729-9262
2017 CATALOG for Load Cells &
Weighing Assemblies
WITHOUT NOTICE.
-CG-26S-SS COMPRESSION CANISTER-
The Model CG-26S-SS is constructed of stainless steel. A hermetically sealed, Single-column
Compression canister load cell that is ideally suited for harsh environmental conditions. The cell housing
is available in stainless steel. Commonly used capacities referenced below. The cell is recommended for
Truck Scale applications. The cell is supplied with an integral 50 foot cable
50K to 120K pounds capacities SINGLE-Column Construction
 NTEP APPROVED Factory Mutual (F.M.) Approved U.S/CAN
IP67 Stainless Steel Hermitically Sealed
LOAD CELL ORDER INFORMATION
MODEL NUMBER CAPACITY LIST PRICE
CG-26S (Load Caps set of 2 included with new Purchase) 50K, 100K, 120K $990.00
652 Load Caps(set of 2) N/A $100.00
INTERCHANGABLE PRODUCTS
ANYLOAD 106ES (50K, 100K ONLY)
CARDINAL SCA, HDD
OPTIMA SENSORS OP-321 MS / SS (MILD OR STAINLESS VERSIONS AVAILABLE)
RICE LAKE WEIGHING SYSTEMS RLSCA
TOTALCOMP TCSCA
SPECIFICATIONS AND DIMENSIONS:
-Page 2–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-26S1-SS COMPRESSION CANISTER-
The Model CG-26S1-SS is constructed of stainless steel. A hermetically sealed, Rocker-Column
canister Load cell that is ideally suited for harsh environmental conditions. The cell housing is
available in stainless steel. Commonly used capacities referenced below. The Load Cell is
recommended for Truck Scale applications. The cell is supplied with an integral 50 Feet Braided
Shield cable.
50K to 100K pounds capacities Rocker-Column Construction
 NTEP APPROVED Factory Mutual (F.M.) Approved U.S/CAN
CG-26S1 50KSE, $795.00
CG-26S1 50KLE $795.00
CG-26S1 100K $875.00
ANYLOAD 106RS-FB-50KLE
FAIRBANKS 64166
FAIRBANKS LCF-HR-4020-2-50KLE
FLINTEC RC1 250KN
OPTIMA SENSORS OP-322-MS / SS(MILD OR STAINLESS VERSIONS AVAILABLE)
RICE LAKE WEIGHING SYSTEMS RL75114-50KLE
-Page 3–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-26S1-65114-SS COMPRESSION CANISTER-
The Model CG-26S1-65114-SS is constructed of stainless steel. A hermetically sealed, Rocker-
Column canister Load cell that is ideally suited for harsh environmental conditions. The cell housing
is available in stainless steel. Commonly used capacities referenced below. The Load Cell is
Shield cable
50K pounds capacities Rocker-Column Construction  NTEP APPROVED
Factory Mutual (F.M.) Approved U.S/CAN IP67 Stainless Steel Hermitically Sealed
CG-26S1-65114 50KSE, $795.00
CG-26S1-65114 50KLE $795.00
ANYLOAD 106RS-FB
FAIRBANKS 63951
RICE LAKE WEIGHING SYSTEMS 50KLE > RL75114
SENSORTRONICS-VISHAY 65114S
OPTIMA SENSORS OP-323-MS / SS (MILD OR STAINLESS VERSIONS AVAILABLE)
-Page 4–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-26S2-SS COMPRESSION CANISTER
The Model CG-26S2-SS is constructed of stainless steel. A hermetically sealed, Rocker-Column
available in stainless steel. Commonly used capacities referenced below. The Load Cell is
Shield cable.
Factory Mutual (F.M.) Approved U.S/CAN IP67Stainless Steel Hermitically Sealed
CG-26S2 30t $795.00
CG-26S2 56K $795.00
656A LOAD CUP, UPPER $95.00
657 LOAD CUP, LOWER $125.00
WEIGH MODULE ORDER INFORMATION
CG-26S2-8 TOLEDO™ DIGITAL TRUCK SCALE CONVERSION WEIGH MODULE KIT, INCLUDES LOAD CELLS AND UPPER AND
LOWER CUPS
$8,120.00
CG-26S2-10 TOLEDO™ DIGITAL TRUCK SCALE CONVERSION WEIGH MODULE KIT, INCLUDES LOAD CELLS AND UPPER AND
LOWER CUPS
$8,120.00
ANYLOAD 106RS-FB
FAIRBANKS LCF-HR-4020-19
OPTIMA SENSORS OP-324 – MS / SS (MILD OR STAINLESS VERSIONS AVAILABLE)
-Page 5 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
The Model CG-26S3-SS is constructed of stainless steel. A hermetically sealed, Single-Column canister Load cell that is ideally
suited for harsh environmental conditions. The cell housing is available in stainless steel. Commonly used
capacities referenced below. The Load Cell is recommended for Truck Scale applications. The cell is supplied
with an integral 50 Feet Standard cable.
20K-200K pounds capacities Factory Mutual (F.M.) Approved U.S.
CG-26S3-20K 20K $1,400.00
CG-26S3-50K 50K $1,400.00
CG-26S3-100K 100K $1,600.00
CG-26S3-200K 200K $2,300.00
ARTECH 90405
BLH-VISHAY C2P1
FAIRBANKS 3-38065-X, 3-380-66-X
HBM C-10
REVERE TRANSDUCERS-VISHAY 792
RICE LAKE WEIGHING SYSTEMS RL8C2P1SS
STREETER RICHARDSON 2011611,2011612, 2011613,2011614, 2011617
TOLEDO (METTLER) 10011-00A, 10014900A, 10049200A, 10049300A
TOTALCOMP TC-C2P1
-Page 6 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-26S3-10 SS COMPRESSION CANISTER
The Model CG-26S3-10 SS is constructed of stainless steel. A hermetically sealed, Single-Column canister
Load cell that is ideally suited for harsh environmental conditions. The cell housing is available in stainless
steel. Commonly used capacities referenced below. The Load Cell is recommended for Truck Scale
applications. The cell is supplied with an integral 50 Feet Standard cable.
50K-200K pounds capacities Factory Mutual (F.M.) Approved U.S.  1000 OHM BRIDGE
CG-26S3-10-50K 50K $1,400.00
CG-26S3-10-100K 100K $1,600.00
CG-26S3-10-200K 200K $2,300.00
FAIRBANKS 3-43076-1, 343076-2, 3-43076-3
TOTALCOMP TC-C2P1-1000
-Page 7 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-106TS-SS COMPRESSION CANISTER
The Model 106TS-SS is constructed of stainless steel. A hermetically sealed, Rocker-Column
Analog canister Load cell that is ideally suited for harsh environmental conditions. The cell
housing is available in stainless steel. Commonly used capacities referenced below. The Load
Cell is recommended for Truck Scale applications. The cell is supplied with an integral 50 Feet
Braided Shield cable
Analog replacement for:
Powercell 760*
Powercell MTX*
30K, 50K pounds and 30t capacities Rocker-Column Construction  NTEP APPROVED
106TS-30K 30K CALL FOR PRICING
106TS-50K 50K CALL FOR PRICING
106TS-30t 30t CALL FOR PRICING
Mettler-Toledo Powercell 760* > * Mettler-Toledo Powercell 760 and MTX are digital load cells
Mettler-Toledo Powercell MTX* > * Mettler-Toledo Powercell 760 and MTX are digital load cells
-Page 8 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
The Model CG-26S4-SS is constructed of stainless steel. A hermetically sealed, Rocker-Column canister
Load cell that is ideally suited for harsh environmental conditions. The cell housing is available in
stainless steel. Commonly used capacities referenced below. The Load Cell is recommended for Truck
Scale applications. The cell is supplied with an integral 50 Feet Braided Shield cable
15t-60t capacities Rocker-Column Construction  NTEP APPROVED
Factory Mutual (F.M.) Approved U.S/CAN IP67
Stainless Steel Hermitically Sealed
CG-26S4-15t-40t 15t, 20t, 25t, 30t,40t $8000.00
CG-26S4-50t-60t 50t, 60t $895.00
NOTE New Receiver Cups with new load cell purchase
ANYLOAD 106HS
HBM C16
REVERE TRANSDUCERS-VISHAY ASC
UTILCELL 740 ANALOG VERSION
-Page 9 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-175-SS COMPRESSION CANISTER
The Model CG-175-SS is constructed of stainless steel. A hermetically sealed, multi-column
canister cell that is ideally suited for harsh environmental conditions. The cell housing is
available in stainless steel. Commonly used capacities referenced below. The cell is
recommended for tank, truck, track and hopper type industrial applications. The cell is supplied
with an integral 50 foot cable
10K to 500K pounds capacities Multi-Column Construction Hermetically Sealed
Factory Mutual (F.M.) Approved IP67 Stainless Steel
CG-26S 10K, 25K, 50K $990.00
CG-26S 100K $1,100.00
CG-26S 200K, 300K $1,540.00
CG-26S 500K $2,750.00
ANYLOAD 106CS (25K-200KLB ONLY)
ARTECH 90210
CARDINAL CP1
HOWE RICHARDSON 20908XXX
OPTIMA SENSORS OP-315A, OP-315A-SS
REVERE TRANSDUCERS-VISHAY CP, 392B
STREETER AMET 3751940, 2752030, 3752040, 3753070
TOTALCOMP TCP1
-Page 10 –

MONARCH TRANSDUCERS
& WEIGHING SYSTEMS
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
The Model CG-26S5-SS is constructed of stainless steel. A hermetically sealed, multi-column
canister cell that is ideally suited for harsh environmental conditions. The cell housing is
available in stainless steel. Commonly used capacities referenced below. The cell is
recommended for tank, truck, track and hopper type industrial applications. The cell is
supplied with an integral 50 foot cable
10K to 500K pounds capacities Multi-Column Construction Hermetically Sealed
Factory Mutual (F.M.) Approved IP67 Stainless Steel
CG-26S-10K, 25K, 50K 10K, 25K, 50K $1,100.00
CG-26S-100K 100K $1,300.00
CG-26S-200K, 300K 200K, 300K $1,600.00
CG-26S-500K 500K $2,750.00
ANYLOAD 106CS20 (25K-200KLB ONLY)
ARTECH 90310
HOWE RICHARDSON 244699-000X
OPTIMA SENSORS OP-315A, OP-315A-SS
REVERE TRANSDUCERS-SENSORTONICS-VISHAY 692B, CSP, CSP1, 65088-1000
RICE LAKE WEIGHING SYSTEMS RLCSP1
STREETER AMET 3760XXX
TOTALCOMP TCSP1
-Page 11 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
Scale applications. The cell is supplied with an integral 50 Feet Braided Shield cable.
Factory Mutual (F.M.) Approved U.S/CAN IP67Stainless Steel Hermitically Sealed
CG-26S6 22.5t $895.00
CG-26S6 30t-40t $895.00
CG-26S6* 50t $1,155.00
628-50t-LOAD CUP, UPPER $90.00
629-50t- LOAD CUP, LOWER $90.00
ANYLOAD 106RS-FB-30t ONLY
FAIRBANKS LCF-HR-4020-2A-30t
FAIRBANKS LCF-HR-4020-4A-50t
FLINTEC RC3
OPTIMA SENSORS OP-326 – MS / SS (MILD OR STAINLESS VERSIONS AVAILABLE)
-Page 12 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
Scale applications. The cell is supplied with an integral 50 Feet Braided Shield cable
20t-100t capacities Rocker-Column Construction  NTEP APPROVED
CG-26S7-20t 20t $800.00
CG-26S7-30t 30t $800.00
CG-26S7-50t 50t $800.00
CG-26S7-30t-797 30t-797 $850.00
CG-26S7-50t-797 50t-797 $850.00
CG-26S7-100t 100t $1,200.00
TOLEDO 20t-71201708
TOLEDO 30t-71201709
TOLEDO 50t-71201710
TOLEDO 100t-71201711
-Page 13–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-CC22-SS COMPRESSION CANISTER
The Model CG-CC22-SS is constructed of stainless steel. A hermetically sealed, Column canister Load cell
that is ideally suited for harsh environmental conditions. The cell housing is available in stainless steel.
Commonly used capacities referenced below. The Load Cell is recommended for Truck Scale applications.
The cell is supplied with an integral 50 Feet 6 Wire conductor cable
50K-100K pounds capacities Column Construction
CG-CC22-50K 50K $1,320.00
CG-CC22-100K 100K $1,650.00
620-50,000 LB CAP SEE DRAWING BELOW FOR DIMENSIONS $350.00
621-50,000 LB PIN SEE DRAWING BELOW FOR DIMENSIONS $115.00
622-50,000 LB BOTTOM BASE PLATE SEE DRAWING BELOW FOR DIMENSIONS $535.00
623-100,000 LB CAP SEE DRAWING BELOW FOR DIMENSIONS $535.00
624-100,000 LB PIN SEE DRAWING BELOW FOR DIMENSIONS $115.00
625-100,000 LB BOTTOM BASE PLATE SEE DRAWING BELOW FOR DIMENSIONS $7702.00
626-50,000 LB CASTING UPPER PART SEE DRAWING BELOW FOR DIMENSIONS $300.00
627-100,000 LB CASTING UPPER PART SEE DRAWING BELOW FOR DIMENSIONS $400.00
ANYLOAD 106KS
TOLEDO B10883600A
TOLEDO B10887700A
TOTALCOMP T752
-Page 14–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-CP22-SS COMPRESSION CANISTER
The Model CG-CP22-SS is constructed of stainless steel. A hermetically sealed, Single Column canister
Load cell that is ideally suited for harsh environmental conditions. The cell housing is available in stainless
steel. Commonly used capacities referenced below. The Load Cell is recommended for Tank and Silo Scale
applications. The cell is supplied with an integral 50 Feet Standard cable
5K-50K pounds capacities  Single Column Construction
CG-CP22-5K 5K $1,265.00
CG-CP22-10K 10K $1,265.00
CG-CP22-15K 15K $1,430.00
CG-CP22-20K 20K $1,430.00
CG-CP22-50K 50K $1,430.00
TOLEDO 04966 SERIES
TOLEDO 04967 SERIES
TOLEDO 04968 SERIES
TOTALCOMP T496
-Page 15–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-412-SS COMPRESSION CANISTER
The Model CG-412-SS is constructed of stainless steel. A hermetically sealed, low profile Single Column
canister Load cell that is ideally suited for harsh environmental conditions. The cell housing is available in
stainless steel. Commonly used capacities referenced below. Designed for use with tanks, bin & hopper
weighing, silo, batching and blending. The cell is supplied with an integral 30 Feet Standard cable
Factory Mutual (F.M.) Approved U.S/CAN Stainless Steel
Hermitically Sealed  Low Profile with Mounting Hardware Available see page 17
CG-412-10K 10K $900.00
CG-412-15K 15K $900.00
CG-412-20K 20K $900.00
CG-412-25K 25K $900.00
CG-412-30K 30K $900.00
CG-412-50K 50K $900.00
OPTIMA SENSORS OP-328-MS/SS
-Page 16–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-412M-STAINLESS STEEL-
The Model CG-412M-SS is a low profile, all stainless steel canister assembly. Unit is hermetically
sealed, self-checking, and supplied with integral mounting plates. Simplified installation and long-term
reliable operation. Designed for use with tanks, bin & hopper weighing, silo, batching and blending. The
load cell is supplied with an integral 30 Feet Standard cable
Complete Kit Includes:
 3 or 4 CG-412-Stainless Steel Load Cells with mounts
 1 SS-34AS Stainless Steel Signal Trim Junction Box
25’ Feet Hostile Environment Cable
SS LOAD CELL WITH SS PLATES SINGLE MOUNT & LOAD CELL SS LOAD CELL WITH SS PLATES 3 MOUNTS & LOAD CELLS SS LOAD CELL WITH SS PLATES 4 MOUNTS & LOAD CELLS
MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST
PRICE
CG-412M-10K-1 10K $1,300.00 CG-412M-10K-3 30K $4,100.00 CG-412M-10K-4 40K $5,400.00
-Page 17–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-SP9-STAINLESS STEEL COMPRESSION CANISTER
The Model CG-SP9 is constructed of stainless steel. A hermetically sealed, Single Column
available in stainless steel. Commonly used capacities referenced below. Designed for use with
tank, bin & hopper weighing, silo, batching and blending. The cell is supplied with an integral
30 Feet Standard cable.
Mounting Hardware Available see page 19 Factory Mutual (F.M.) Approved U.S/CAN
CG-SP9-1K-50K 1K, 2K, 2.5K, 5K, 10K, 20K, 25K, 50K $900.00
CG-SP9-100K 100K $1,000.00
CG-SP9-150K-200K 150K, 200K, 250K $1,400.00
-Page 18–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-SP9M-STANLESS STEEL MOUNTING HARDWARE-
The Model CG-SP9M-SS Compression Canister Tank Weighing Assembly - Stainless Steel load
cell w/Stainless Steel Mounting Tank mount assembly uses a hermetically sealed canister load cell
with two attached mounting plates. The lower plate is rigidly mounted to the load cell. The top
plate allows horizontal expansion but does not separate from the load cell. , all stainless steel
canister assembly.
The load cell is supplied with an integral 30 Feet Standard cable
Can be ordered as a kit, A Complete Kit would Includes
 3 or 4 CG-SP9-Alloy Steel or Stainless Steel Load Cells with mounts
SS LOAD CELL WITH5 INCH SS PLATES SINGLE MOUNT & LOAD CELL SS LOAD CELL WITH SS 8 INCHPLATES SINGLE MOUNT & LOAD CELL
MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST PRICE
CG-SP9M-1K-50K-5 1K, 2K, 2.5K, 5K, 10K, 20K, 25K, 50K $1,250.00 CG-SP9M-1K-50K-8 1K, 2K, 2.5K, 5K, 10K, 20K, 25K, 50K $1,400.00
CG-SP9M-100K-5 100K $1,350.00 CG-SP9M-100K-8 100K $1,500.00
CG-SP9M-150K-8 150K $1,900.00
CG-SP9M-200K-8 200K $1,900.00
CG-SP9M-250K-8 250K $1,900.00
-Page 19–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-94-ALLOY OR STAINLESS STEEL COMPRESSION CANISTER -
The Model CG-94 is constructed of either Alloy or Stainless steel. A Multi Column canister Load
cell that is ideally suited for harsh environmental conditions. The cell housing is available in alloy or
stainless steel. Commonly used capacities referenced below. Designed for use with tank, bin &
hopper weighing, silo. The cell is supplied with an integral 50 Feet Stainless Steel Braided Cable
50K-300K pounds capacities  Multi Column Construction
 Mounting Hardware Available see page 21 Factory Mutual (F.M.) Approved U.S/CAN
Stainless Steel Environmentally Sealed
ALLOY STEEL LOAD CELL STAINLESS STEEL LOAD CELL
MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST PRICE
CG-94-50K-AS 50K $840.00 CG-94-50K-SS 50K $990.00
CG-94-100K-AS 100K $850.00 CG-94-100K-SS 100K $1,000.00
CG-94-200K-AS 200K $1,250.00 CG-94-200K-SS 200K $1,400.00
CG-94-300K-AS 300K $1,250.00 CG-94-300K-SS 300K $1,400.00
SENSORTONICS-VISHAY 65094-50K-300K
-Page 20–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-94M- ALLOY OR STAINLESS STEEL MOUNTING HARDWARE-
The Model CG-94M-Alloy Steel or Stainless Steel Compression Canister Tank Weighing
Assembly. Uses an Environmentally sealed canister load cell with two attached mounting
plates. The lower plate is rigidly mounted to the load cell. The top plate allows horizontal
expansion but does not separate from the load cell. The load cell is supplied with an integral
50 Feet Stainless Steel Braided Cable
Tank weighing assembly designed for use with tanks, bins, reactors, and large capacity storage
silos
 3 or 4 CG-94-Alloy Steel or Stainless Steel Load Cells with mounts
SINGLE ALLOY STEEL LOAD CELL WITH MILD STEEL SINGLE
MOUNT
ALLOY STEEL LOAD CELL WITH MILD STEEL 3 MOUNTS &
LOAD CELL
LOAD CELL
MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST PRICE MODEL NUMBER CAPACITY LIST PRICE
CG-94M-50K-MS-1 50K $1,064.00 CG-94M-50K-MS-3 150K $3,382.00 CG-94M-50K-MS-4 200K $4,446.00
CG-94M-300K-MS-1 300K $2,598.00 CG-94M-300K-MS-3 900K $7,984.00 CG-94M-300K-MS-4 1,200,000K $10,582.00
SINGLE STAINLESS STEEL LOAD CELL WITH STAINLESS STEEL
SINGLE MOUNT & LOAD CELL
LOAD CELL
LOAD CELL
CG-94M-50K-SM-1 50K $1,064.00 CG-94M-50K-MS-3 150K $3,382.00 CG-94M-50K-MS-4 200K $4,446.00
CG-94M-300K-SM-1 300K $2,598.00 CG-94M-300K-MS-3 900K $7,984.00 CG-94M-300K-MS-4 1,200,000K $10,582.00
-Page 21–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-JRT ALLOY STEEL-
The Model CG-JRT is constructed of alloy steel. The JRT utilizes a unique torsion ring design and is
intended for high capacity loading in tank, vessel and truck weighing applications. The design
accommodates the highly accurate rocker pin load Introduction technique. Capacities of 20,000 to
200,000 lb. Complete with 50' feet of Standard load cell cable
Commonly used capacities referenced below. Designed for use with tank, bin & hopper weighing, silo.
The cell is supplied with an integral 50 Feet Stainless Steel Braided Cable
20K-200K pounds capacities  torsion ring design Factory Mutual (F.M.) Approved U.S.
Alloy Steel Environmentally Sealed
ALLOY STEEL LOAD CELL
CG-JRT-20K 20K $900.00
CG-JRT-50K 50K $995.00
CG-JRT-75K 75K $1,100.00
CG-JRT-100K 100K $1,100.00
CG-JRT-150K 150K $3,428.50
CG-JRT-200K 200K $3,428.50
HBM JRT
OPTIMA SCALE OP-329
TOLEDO 600862-035-50K
TOLEDO 600864-035-100K
TOLEDO 790
-Page 22–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-21-SS TENSION/COMPRESSION CANISTER
The Model CG-21-SS Stainless Steel is a true hermetically sealed load cell. Although a canister, it
uses a single column principle for a high degree of linearity and repeatability. This cell is used in
harsh environments where it may be exposed to water and other contaminants. Typical applications
include Calibration Standards, Batching Systems, and tank/hopper weighing and scale conversions.
The cell is supplied with an integral 50 Feet Standard cable
500LB-100K pounds capacities CG-21 IS 2mV/V CG-31 IS 3mV/V
Single Column Construction Factory Mutual (F.M.) Approved U.S/CAN IP67
CG-21-500 lb-3K 500 lb, 750 lb, 1K, 2K, 3K $1,017.50
CG-21-5K, 10K 5K, 10K $1,155.00
CG-21-20K, 25K, 30K 20K, 25K, 30K $1,375.00
CG-21-50K, 100K, 50K, 100K $1,760.00
BLH T2P1, T3P1, CP31
FAIRBANKS 657090, 657091, 3-38054-X, 3-39897-X, 3-40766-X
STREETER RICHARDSON 2011711, 201117XX, 2011712
TOTALCOMP TT2P1, TC3P1
TOLEDO 104400A, KN713700, KN, 75066, 10049100A, 10048X00A,
-Page 23–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
The Model CG-31-SS Stainless Steel is a true hermetically sealed load cell. Although a canister, it uses a
single column principle for a high degree of linearity and repeatability. This cell is used in harsh
environments where it may be exposed to water and other contaminants. Typical applications include
Calibration Standards, Batching Systems, and tank/hopper weighing and scale conversions. The cell is
supplied with an integral 50 Feet Standard cable
500LB-100K pounds capacities CG-21 IS 2mV/V CG-31 IS 3mV/V
CG-31-500 lb-3K 500 lb, 750 lb, 1K, 2K, 3K $1,017.50
CG-31-5K, 10K 5K, 10K $1,155.00
CG-31-20K, 25K, 30K 20K, 25K, 30K $1,375.00
CG-31-50K, 100K, 50K, 100K $1,760.00
BLH T2P1, T3P1, CP31
FAIRBANKS 657090, 657091, 3-38054-X, 3-39897-X, 3-40766-X
STREETER RICHARDSON 2011711, 201117XX, 2011712
TOTALCOMP TT2P1, TC3P1
TOLEDO 104400A, KN713700, KN, 75066, 10049100A, 10048X00A,
-Page 24–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
The Model CG-33-SS Stainless Steel is a true hermetically sealed load cell. Although a canister, it uses a
single column principle for a high degree of linearity and repeatability. This cell is used in harsh
500LB-100K pounds capacities CG-33 IS 3mV/V
CG-33-500 lb 1K 500 lb, 1K, $1,210.00
CG-33-2.5K, 2.5K, $1,210.00
CG-33-5K, 10K 5K, 10K $1,485.00
CG-33-25K 25K $1,870.00
CG-33-50K 50K $2,530.00
CG-33-100K 100K $6,050.00
REVERE TRANSDUDUCERS-VISHAY USP1
TOTALCOMP TUSP1
-Page 25–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-TC42 SS TENSION/COMPRESSION CANISTER
The Model TC-42-SS Stainless Steel is a true hermetically sealed load cell. Although a canister, it
5K-250K pounds capacities CG-TC42 IS 2mV/V
CG-TC42-5K, 10K 5K, 10K $1,155.00
CG-TC42-20K, 20K, 25K, 30K $1,375.00
CG-TC42-50K, 100K, 50K, 100K $1,760.00
CG-TC42-200K, 250K, 200K, 250K $2,365.00
ARTECH 90510
OPTIMA OP-330-AS / OP-330-SS
REVERE TRANSDUCERS-VISHAY 42U
TOTALCOMP T42
-Page 26–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-TC43 SS TENSION/COMPRESSION CANISTER
The Model TC-43-SS Stainless Steel is a true hermetically sealed load cell. Although a canister, it
5K-250K pounds capacities CG-TC43 IS 3mV/V
CG-TC43-5K, 10K 5K, 10K $1,155.00
CG-TC43-20K, 20K, 25K, 30K $1,375.00
CG-TC43-50K, 100K, 50K, 100K $1,760.00
CG-TC43-200K, 250K, 200K, 250K $2,365.00
ARTECH 90515
TOTALCOMP T43
-Page 27–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-62 SS TENSION/COMPRESSION CANISTER
The Model CG-62-SS Stainless Steel is a true hermetically sealed load cell. It uses the dual guided
cantilever principle for a high degree of linearity and repeatability. This cell is used in harsh
200 lb-3K pounds capacities CG-CG 62 IS 2mV/V
Cantilever Construction Factory Mutual (F.M.) Approved U.S/CAN IP67
CG-62-200lb, 300lb 200lb, 300lb $935.00
CG-62-500lb, 750lb, 1K 500lb, 750lb, 1K $1,017.50
CG-62-2K, 3K 2K, 3K $1,155.00
ARTECH 90510
TOTALCOMP T62
-Page 28–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-63 SS TENSION/COMPRESSION CANISTER
The Model CG-63-SS Stainless Steel is a true hermetically sealed load cell. It uses the dual guided
cantilever principle for a high degree of linearity and repeatability. This cell is used in harsh
200 lb-3K pounds capacities CG-CG 63 IS 3mV/V
CG-63-200lb, 300lb 200lb, 300lb $935.00
CG-63-500lb, 750lb, 1K 500lb, 750lb, 1K $1,017.50
CG-63-2K, 3K 2K, 3K $1,155.00
ARTECH 90515
TOTALCOMP T63
-Page 29–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-92 SS COMPRESSION CANISTER
The Model CG-92-SS Stainless Steel is a true hermetically sealed load cell. This cell is used in harsh
5K-200K pounds capacities CG-92 IS 2mV/V
CG-92-5K, 10K 5K, 10K $1,265.00
CG-92-20K, 25K 20K, 25K $1,292.00
CG-92-50K 50K $1,292.00
CG-92-100K 100K $1,430.00
CG-92-150K, 200K 150K, 200K $1,870.00
ARTECH 90510
TOTALCOMP T92
-Page 30–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-93 SS COMPRESSION CANISTER
The Model CG-93-SS Stainless Steel is a true hermetically sealed load cell. This cell is used in harsh
5K-200K pounds capacities CG-93 IS 3mV/V
CG-93-5K, 10K 5K, 10K $1,265.00
CG-93-20K, 25K 20K, 25K $1,292.00
CG-93-50K 50K $1,292.00
CG-93-100K 100K $1,430.00
CG-93-150K, 200K 150K, 200K $1,870.00
ARTECH 90515
TOTALCOMP T93
-Page 31–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-Digistar™ COMPRESSION CANISTER-
The Digistar™ Model C.T. is constructed of Nickel plated Alloy steel. An environmentally sealed, single-
column canister cell that is ideally suited for On board Weighing in the Agricultural industry on Feed and
Grain Wagons commonly made by Kirby & Laird Mfg. The cell is supplied with an integral 30 foot cable
10K to 50K pounds capacities Accuracy 99.75% to 99.9% Standard temperature compensated
Ideal for stationary/mobile applications with high capacity such as feed mixers, grain carts, (bio) mixers, silos
Special mounts available for stationary or mobile applications Contact Monarch for more information
CT10K-21’ - DIGI-STAR P/N 824181 - 10K $CONTACT MONARCH FOR PRICING
CT30KTC-30’ - DIGI-STAR P/N 403275 (THIS 30K REPLACES THE 148008 & 153101 CT LOAD CELLS) 30K $CONTACT MONARCH FOR PRICING
CT50KTC-30’ - DIGI-STAR P/N 404172 - 50K $CONTACT MONARCH FOR PRICING
NOTE: Functional replacement for the CLB50-3 “The Great Pumpkin” Load cell in all Mixer Systems. It is ok to mix this load cell and the
CLB50-3 in a mixer system.
NOTE: In regards to the Flats CT10K-21’ - DIGI-STAR P/N 824181 DOES NOT HAVE FLATS
SPECIFICATIONS STATIC LOAD MOBILE LOAD
RATED LOAD, LBS. 10,000 lbs / 10K 4,500 lbs / 4.5K
RATED OUTPUT, mV/V .95 N/A
RATED LOAD, LBS. 30,000 lbs / 30K 15,000 lbs / 15K
RATED OUTPUT, mV/V 3.00 1.500
RATED LOAD, LBS. 50,000 lbs / 50K 35,000 lbs / 35k
RATED OUTPUT, mV/V 2.500 1.750
-Page 32 –

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CGSB-1 “S” TYPE LOAD CELL
The CGSB-1 “S” type load cell is an Economical Alloy Steel load cell for use in tank weighing, scale
conversions and in-line force measurement applications. The versatile and compact unit works in
tension or compression and is lightweight. Also rugged and sealed for use in wash-down areas. The
250 lb-10K pounds capacities NTEP APPROVED/LEGAL FOR TRADE
Factory Mutual (F.M.) Approved U.S IP67
Alloy Steel Electronic Conversion of Mechanical
Scale Tank, Hopper & Bag Weighing
Force Measurement Tension and Compression Dynamometer Hanging and Crane Scales
Industrial Automation Concrete batching plants
CGSB-1-250lb, 300lb 250lb, 300lb $165.00
CGSB-1-500lb, 750lb, 1K, 1.5K, 2K, 2.5K 500lb, 750lb, 1K, 1.5K, 2K, 2.5K $165.00
CGSB-1-3K 3K $325.00
CGSB-1-5K, 10K 5K, 10K $325.00
ARTECH 20210
RICE LAKE WEIGHING SYSTEMS RL20000
TOTALCOMP NIKKIE
-Page 33–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CGSB “S” TYPE LOAD CELL
The CGSB “S” type load cell is an Economical load cell for use in tank weighing, scale conversions and
in-line force measurement applications. The versatile and compact unit works in tension or
compression and is lightweight. Also rugged and sealed for use in wash-down areas. The load cell is
supplied with an integral 20 Feet Standard cable.
Alloy Steel Electronic Conversion of Mechanical
Industrial Automation Concrete batching plants Mounting Hardware Available see page 30
CGSB-*25lb, *50lb *25lb, *50lb $165.00
CGSB-*100lb, *150lb, *200lb *100lb, *150, *200lb 250lb, 300lb $165.00
CGSB-250lb, 300lb, 500lb, 750lb 250lb, 300lb, , 500lb, 750lb $165.00
CGSB-1K, 1.5K, 2K, 2.5K, 3K 1K, 1.5K, 2K, 2.5K, 3K $165.00
CGSB-5K, 10K 5K, 10K $325.00
CGSB-15K 15K $455.00
CGSB-20K 20K $685.00
CGSB-40K 40K $955.00
ANYLOAD 101NH
CELTRON-VISHAY STC
OPTIMA SENSORS OP-312
SENSORTRONICS-VISHAY 60001
NOTE: *NON-NTEP
-Page 34–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-ICTM SUSPENSION MOUNT FOR CGSB “S” TYPE LOAD CELL
The ITCM Series utilizes several Coti Global components to provide an unmatched level of performance in tank and
hopper weighing applications and mechanical scale conversions.| The unique swivel design combines
multidirectional movement with self-checking capabilities that the Clevis type mounts cannot offer.| Ideal for Indoor
and outdoor process control applications.| Double electrical isolation with Teflon insulator and ground strap,
provides added protection to the load cell.| Height adjustment available on each module.| Load cell pattern matches
suspension or tension rod thread pattern.| Made with Aircraft grade, stainless steel, Load stem provides added
strength and durability.| Main housing is made out of cold drawn steel and coated with Zinc and Clear Chromate
plating.| Entire assembly will meet or exceed IP67 rating.
3 OR 4 EA. ITCM Weigh Module Assemblies with CGSB NTEP Certified Load Cells
1 EA. SS-34AS Stainless Steel Signal or Excitation trim Junction Box
25 Ft. Hostile Environment Cable
Optional Weight Indicator
Applications:
Industrial Automation Concrete batching plants Suspended Hoppers
Mechanical Scale Conversions Use as a Single Module or in Multiples
ITCM ASSEMBLY WITH SINGLE MODULE WITH ALLOY STEEL LOAD
CELL
ITCM ASSEMBLY 3 MODULE KITWITH ALLOY STEEL LOAD
CELL
ITCM ASSEMBLY 4 MODULE KIT WITH ALLOY STEEL LOAD
CELL
*ITCM-50lb *50lb $326.50 *ITCM-50lb-3 150lb $1,369.50 *ITCM-50lb-4 200lb $1,696.00
ITCM-100lb 100lb $326.50 ITCM-100lb-3 300lb $1,369.50 ITCM-100lb-4 400lb $1,696.00
ITCM-200lb 200lb $326.50 ITCM-200lb-3 600lb $1,369.50 ITCM-200lb-4 800lb $1,696.00
ITCM-250lb 250lb $326.50 ITCM-250lb-3 750lb $1,369.50 ITCM-250lb 1,000lb $1,696.00
ITCM-300lb 300lb $326.50 ITCM-300lb-3 900lb $1,369.50 ITCM-300lb-4 1,200lb $1,696.00
ITCM-500lb 500lb $336.00 ITCM-500lb-3 1,500lb $1,398.00 ITCM-500lb-4 2,000lb $1,734.00
ITCM-750lb 750lb $336.00 ITCM-750lb-3 2,250lb $1,398.00 ITCM-750lb-4 3,000lb $1,734.00
ITCM-1K 1K $336.00 ITCM-1K-3 3,000lb $1,398.00 ITCM-1K-4 4,000lb $1,734.00
ITCM-1.5K 1.5K $336.00 ITCM-1.5K-3 4,500lb $1,398.00 ITCM-1.5K-4 6,000lb $1,734.00
ITCM-2.5K 2.5K $336.00 ITCM-2.5K-3 7,500lb $1,398.00 ITCM-2.5K-4 10,000lb $1,734.00
ITCM-20K 20K $1,212.00 ITCM-20K-3 60,000lb $4,026.00 ITCM-20K-4 80,000lb $5,238.00
NOTE: *NON-NTEP
-Page 35–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CGSB SS “S” TYPE LOAD CELL
The CGSB-SS “S” type load cell is an Economical Stainless Steel load cell for use in tank weighing, scale
conversions and in-line force measurement applications. The versatile and compact unit works in
tension or compression and is lightweight. Also rugged and sealed for use in wash-down areas. The
Stainless Steel Electronic Conversion of Mechanical
Industrial Automation Concrete batching plants Mounting Hardware Available see page 32
CGSB SS-100lb, 200lb, 300lb 100lb, 200lb 250lb, 300lb $295.00
CGSB SS-500lb, 750lb 500lb, 750lb $295.00
CGSB SS-1K, 1.5K, 2K, 2.5K, 3K 1K, 1.5K, 2K, 2.5K, 3K $295.00
CGSB SS-5K 5K $435.00
CGSB SS-10K 10K $435.00
CGSB SS-15K 15K $550.00
CGSB SS-20K 20K $850.00
ANYLOAD 101NSGS
CELTRON-VISHAY STC-SS
OPTIMA SENSORS OP-312SS
RICE LAKE WEIGHING SYSTEMS RL20000S & ST
-Page 36–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-ICTM SUSPENSION MOUNT FOR CGSB SS“S” TYPE LOAD CELL
3 OR 4 EA. ITCM Weigh Module Assemblies with CGSB-SS NTEP Certified Load Cells
Applications:
ITCM ASSEMBLY WITH SINGLE MODULE WITH STAINLESS
STEEL LOAD CELL
ITCM ASSEMBLY 3 MODULE KIT WITH STAINLESS STEEL LOAD
CELL
ITCM ASSEMBLY 4 MODULE KIT WITH STAINLESS STEEL
LOAD CELL
MODEL NUMBER TOTAL CAPACITY LIST PRICE MODEL NUMBER TOTAL CAPACITY LIST PRICE MODEL NUMBER TOTAL CAPACITY LIST PRICE
*ITCM-50lb-SS *50lb $456.50 *ITCM-50lb-3-SS 150lb $1,759.50 *ITCM-50lb-4-SS 200lb $2,216.00
ITCM-100lb-SS 100lb $456.50 ITCM-100lb-3-SS 300lb $1,759.50 ITCM-100lb-4-SS 400lb $2,216.00
ITCM-200lb-SS 200lb $456.50 ITCM-200lb-3-SS 600lb $1,759.50 ITCM-200lb-4-SS 800lb $2,216.00
ITCM-250lb-SS 250lb $456.50 ITCM-250lb-3-SS 750lb $1,759.50 ITCM-250lb-SS 1,000lb $2,216.00
ITCM-300lb-SS 300lb $456.50 ITCM-300lb-3-SS 900lb $1,759.50 ITCM-300lb-4-SS 1,200lb $2,216.00
ITCM-500lb-SS 500lb $466.00 ITCM-500lb-3-SS 1,500lb $1,788.00 ITCM-500lb-4-SS 2,000lb $2,254.00
ITCM-750lb-SS 750lb $466.00 ITCM-750lb-3-SS 2,250lb $1,788.00 ITCM-750lb-4-SS 3,000lb $2,254.00
ITCM-1K-SS 1K $466.00 ITCM-1K-3-SS 3,000lb $1,788.00 ITCM-1K-4-SS 4,000lb $2,254.00
ITCM-1.5K-SS 1.5K $466.00 ITCM-1.5K-3-SS 4,500lb $1,788.00 ITCM-1.5K-4-SS 6,000lb $2,254.00
ITCM-2.5K-SS 2.5K $466.00 ITCM-2.5K-3-SS 7,500lb $1,788.00 ITCM-SS-2.5K-4-SS 10,000lb $2,254.00
ITCM-20K-SS 20K $1,377.00 ITCM-20K-3-SS 60,000lb $4,521.50 ITCM-20K-4-SS 80,000lb $5,898.00
NOTE: *NON-NTEP
-Providing You The Best in Weighing Solutions-
-Page 37–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CGSB SSW “S” TYPE LOAD CELL
The CGSB-SSW “S” type load cell is an Economical Stainless Steel Welded load cell for use in tank
weighing, scale conversions and in-line force measurement applications. The versatile and compact
unit works in tension or compression and is lightweight. Also rugged and sealed for use in wash-
down areas. The load cell is supplied with an integral 20 Feet Standard cable
750 lb-20K pounds capacities Welded Seal
Stainless Steel Welded Electronic Conversion of Mechanical
Force Measurement Tension and Compression
Dynamometer Hanging and Crane Scales Industrial Automation
Concrete batching plants Mounting Hardware Available see page 14
CGSB SSW-750, 1K, 1.5K, 2K, 2.5K, 3K 750, 1K, 1.5K, 2K, 2.5K, 3K $465.00
CGSB SSW-5K 5K $650.00
CGSB SSW-10K 10K $650.00
CGSB SSW-15K 15K $850.00
CGSB SSW-20K 20K $995.00
ANYLOAD 101BS
CELTRON -VISHAY STC HSS
RICE LAKE WEIGHING SYSTEMS RL20001-HE
-Page 38–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-ICTM SUSPENSION MOUNT FOR CGSB SSW“S” TYPE LOAD CELL
3 OR 4 EA. ITCM Weigh Module Assemblies with CGSB-SSW Stainless Steel Welded Load Cells
Applications:
ITCM ASSEMBLY WITH SINGLE MODULE WITH STAINLESS STEEL
WELDED LOAD CELL
WELDED LOAD CELL
WELDED LOAD CELL
ITCM-750lb-SSW 750lb $636.00 ITCM-750lb-3 SSW 2,250lb $2,298.00 ITCM-750lb-4 SSW 3,000lb $2,934.00
ITCM-1K-SSW 1K $636.00 ITCM-1K-3 SSW 3,000lb $2,298.00 ITCM-1K-4 SSW 4,000lb $2,934.00
ITCM-1.5K-SSW 1.5K $636.00 ITCM-1.5K-3 SSW 4,500lb $2,298.00 ITCM-1.5K-4 SSW 6,000lb $2,934.00
ITCM-2.5K-SSW 2.5K $636.00 ITCM-2.5K-3 SSW 7,500lb $2,298.00 ITCM-2.5K-4 SSW 10,000lb $2,934.00
ITCM-15K-SSW 15K $1,152.50 ITCM-15K-3 SSW 45,000lb $3,847.50 ITCM-15K-4 SSW 60,000lb $5,000.00
ITCM-20K-SSW 20K $1,522.00 ITCM-20K-3 SSW 60,000lb $4,956.00 ITCM-20K-4 SSW 80,000lb $6,478.00
-Page 39–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-SB250 SS STAINLESSS STEEL SINGLE ENDED BEAM LOAD CELL-
The CG-SB250-SS Stainless Steel shear beam load cell is ideal for low proﬁle platform scales,
tank/hopper weighing, and other process control systems. This load cell is fabricated from stainless steel
to provide the ultimate in protection when caustic or wet environments are encountered. Provided with
the CG-SB250 load cell are mounting holes for securing the cell. Each load cell is furnished with a 20-ft
integral multi-conductor cable secured by strain relief seal.
2.5K-20K pounds capacities NTEP APPROVED/LEGAL FOR TRADE
Stainless Steel
CG-SB250-2.5K 2.5K $440.00
CG-SB250-5K 5K $440.00
CG-SB250-10K 10K $583.00
CG-SB250-20K 20K $797.50
LOAD CELL ACCESORIES ORDER INFORMATION
ACCESSORIES PART NUMBER ACCESORIES LIST PRICE
668 INSERT INSERT $12.00
669 ROCKER WASHER ROCKER WASHER $25.00
670 SPRING PIN SPRING PIN $3.50
CARDINAL SB25000S
CARDINAL SB50000S
CARDINAL SB10000S
CARDINAL SB20000S
OPTIMA SENSORS OP-334-AS / OP-334-SSW
RICE LAKE WEIGHING SYSTEM RLSB250
NOTE: INSERT AND ROCKER WASHER INCLUDED WITH NEW PURCHASE
-Page 40–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-BBS SINGLE ENDED BEAM LOAD CELL-
The Model CG-BBS, is a bending beam load cell that is designed to provide precision performance
under adverse conditions. The cell is environmentally protected with water resistant seal and
neoprene sleeve. Its stainless steel construction makes it an excellent choice for heavy wash down
areas. The cell is supplied with an integral 30 foot cable
50lb-7.5K pounds capacities Factory Mutual (F.M.) Approved U.S
IP67 Stainless Steel
Bin and hopper weighing Belt conveyor scales and net weighing
CG-BBS-50lb, 100lb, 50lb, 100lb, 200lb $440.00
CG-BBS-200lb, 250lb, 500lb, 200lb, 250lb, 500lb, $440.00
CG-BBS-1KSE 1KSE (SMALL ENVELOPE) $440.00
CG-BBS-1KLE 1KLE (LARGE ENVELOPE) $665.00
CG-BBS-2.5K 2.5K $665.00
CG-BBS-5K, 7.5K 5K, 7.5K $1,100.00
ANYLOAD 563SHBB (ONLY TO 2.5K)
ARTECH 40310
BLH-VISHAY LBG1
FAIRBANKS 3-481XX-1, 3-486XX-1
HBM BBS
RICE LAKE WEIGHING SYSTEM RL40BBS
SENSORTONICS-VISHAY 65087
-Page 41–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-Z6 SINGLE ENDED BEAM SS LOAD CELL-
The Model CG-Z6, is a bending beam load cell that is designed to provide precision performance
under adverse conditions. The cell is a welded seal, its stainless steel construction makes it an
excellent choice for heavy wash down areas. The cell is supplied with an integral 6 wire, 20 foot
cable
5kg-200kg capacities Factory Mutual (F.M.) Approved U.S
Variety of other applications where welded sealed load cells are required.
CG-Z6-5kg 5kg $450.00
CG-Z6-10kg 10kg $450.00
CG-Z6-20kg 20kg $450.00
CG-Z6-50kg 50kg $450.00
CG-Z6-100kg 100kg $450.00
CG-Z6-200kg 200kg $450.00
ANYLOAD 563RS
CARDINAL CB6
CELTRON-VISHAY HBB
FLINTEC SB8
HBM Z6
METTLER-TOLEDO MTB
OPTIMA SENSORS OP-335-AS / OP-335-SSW
REVERE TRANSDUCERS-VISHAY SHB
RICE LAKE WEIGHING SYSTEM RLHBB
SCAIME F60X
TEDEA-HUNTLEIGH-VISHAY 355
TOTALCOMP TZ6
TRANSCELL BSH (50kg-300kg ONLY)
UTILCELL 300
-Page 42–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-LC22 SINGLE ENDED BEAM LOAD CELL-
The Model CG-LC22, is a bending beam load cell that is designed to provide precision performance
under adverse conditions. The cell is a welded seal, its alloy steel construction makes it an excellent
choice for light wash down areas. The cell is supplied with an integral 20 foot cable
15kg-300kg capacities Factory Mutual (F.M.) Approved U.S NTEP APPROVED
Variety of other applications where welded sealed load cells are required.
CG-LC22-15kg 15kg $330.00
CG-LC22-30kg 30kg $330.00
CG-LC22-50kg 50kg $330.00
CG-LC22-75kg 75kg $330.00
CG-LC22-150kg 150kg $330.00
CG-LC22-25kg 250kg $330.00
CG-LC22-300kg 300kg $330.00
FIRST WEIGH LC22
UTILCELL 340
OPTIMA SENSORS OP-316-ASW / OP-316-SSW
-Page 43–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-30410 SINGLE ENDED BEAM LOAD CELL-
The Model CG-30410, a rectangular shear link beam, is a versatile and low cost load cell for link
loading. The moveable linkage helps reduce excessive side loads and reading errors. Its high alloy tool
steel construction makes the cell durable for use in livestock and some tank scales. The cell is
environmentally protected with waterproof seal and is nickel / chrome plated to assure resistance
against corrosion. The load cell is supplied with an integral 20 foot cable
1K-5KSE capacities Factory Mutual (F.M.) Approved U.S. NTEP APPROVED (ARTECH/ANYLOAD ONLY)
IP67 Alloy Steel
Livestock scales Tank and hopper weighing
CG-30410-1K-5KSE 1K, 2K, 2.5K, 4K, 5KSE $165.00
ANYLOAD 563YHRT (NTEP APPROVED)
ARTECH 30410 (NTEP APPROVED)
REVERE-TRANSDUCERS-VISHAY 5723
-Page 44–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-23/23-1 SINGLE ENDED SHEAR BEAM LOAD CELL-
The model CG-23 is a versatile Load Cell designed for multiple use in low profile and platform scales as well
as tank, bin, and hopper weighing systems. The high alloy steel construction ensures durability and precision
performance. The cell is environmentally protected with water resistant seal and is nickel / chrome plated to
assure resistance against corrosion. The cell is supplied with an integral 20 foot cable
Mounting hardware is also available.
 Model CG-23 threaded hole / Model CG-23-1 Non–Threaded hole 250 to 20K pounds capacities
 Complete environmental protection IP-67 NTEP certified versions available for class III / III L 5000 divisions
 Factory Mutual (F.M.) Approved  Stainless Steel and welded Stainless Steel versions available
 See Page 46 (CG-23M), 47 (CG-59M) and 48 (CG-82M) for mounting hardware for respective application.
PRODUCT NO. CAPACITY ACCURACY CLASS ENVELOPE LIST PRICE
CG-23-100 lb 100 lb NON-NTEP SMALL ENVELOPE $165.00
CG-23-250lb, 500 lb 250 lb, 500 b NTEP 1:500, CLASS III MULTIPLE CELL SMALL ENVELOPE $165.00
CG-23-1K,1.5K, 2K, 2.5K, 4K, 5KSE 1K, 1.5K, 2K, 2.5K, 4K, 5KSE NTEP 1:500, CLASS III MULTIPLE CELL SMALL ENVELOPE $165.00
CG-23-5K LE, 10K 5,000 lb, 10,000 NTEP 1:500, CLASS III MULTIPLE CELL LARGE ENVELOPE $275.00
CG-23-15K, 20K 15,000 lb, 20,000LB NTEP 1:500, CLASS III MULTIPLE CELL LARGE ENVELOPE $545.00
ANYLOAD 563YH (NTEP APPROVED)
ARTECH 30310 /30210 (NTEP APPROVED)
CELTRON/VISHAY SQB
HBM A35
OPTIMA SENSORS OP-310
REVERE-TRANSDUCERS/VISHAY 5123
SENSORTONICS/VISHAY 65023
TEDEA/VISHAY 3411
TOTALCOMP TSB
TRANSCELL SBS (15K SE)
NOTE: CG-23-1 SIGNIFIES NON- THREADED LOAD HOLE
-Page 45–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-23M-MS MOUNT FOR CG-23 SHEAR BEAMS-
The CG-23M Series utilizes several Coti Global components to provide an unmatched level of performance in tank
and hopper weighing applications and mechanical scale conversions, is designed to utilize single ended shear beams
for tank and hopper weighing. The module is available in either mild steel or stainless steel
Center pivoted tension loading | Spherical washer design | Self-checking movement | Easy installation | Adjustable
height | shock load protection | thermal expansion & contraction
3 OR 4 EA. CG-23M-MS Weigh Module Assemblies with CG-23 NTEP LOAD CELLS
Applications:
Mechanical Scale Conversions Tank, Hopper
CG-23M-MS ASSEMBLY WITH SINGLE MODULE WITH ALLOY
STEEL LOAD CELL
CG-23M-MS ASSEMBLY WITH 3 MODULE WITH ALLOY STEEL
LOAD CELL
LOAD CELL
CG-23M-250lb-MS 250lb $490.00 CG-23M-250lb-MS-3 750lb $1,470.00 CG-23M-250lb-MS-4 1,000lb $2,934.00
CG-23M-500lb-MS 500lb $490.00 CG-23M-500lb-MS-3 1,500lb $1,470.00 CG-23M-500lb-MS-4 2,000lb $2,934.00
CG-23M-1K-MS 1Klb $490.00 CG-23M-1K-MS-3 3,000lb $1,470.00 CG-23M-1K-MS-4 4,000lb $2,934.00
CG-23M-1.5K-MS 1.5Klb $490.00 CG-23M-1.5K-MS-3 4,500lb $1,470.00 CG-23M-1.5K-MS-4 6,000lb $2,934.00
CG-23M-5KSE-MS 5KSElb $490.00 CG-23M-5KSE-MS-3 15,000lb $1,470.00 CG-23M-5KSE-MS-4 20,000lb $2,934.00
CG-23M 5KLE-MS 5K $625.00 CG-23M 5KLE-MS-3 15,000lb $1,875.00 CG-23M 5KLE-MS-4 20,000lb $3,712.00
CG-23M -10K-MS 10K $625.00 CG-23M -10K-MS-3 30,000lb $1,875.00 CG-23M -10K-MS-4 40,000lb $3,712.00
-Page 46–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-59M-MS NEOPRENE ISOLATION MOUNT FOR CG-23 SHEAR BEAMS-
The CG-59M Neoprene Isolation Mount Series utilizes several Coti Global components to provide an unmatched level
of performance in tank and hopper weighing applications and mechanical scale conversions, is designed to utilize
single ended shear beams for tank and hopper weighing. The module is available in either mild steel or stainless steel
The CG-59M is designed for use in light to medium capacity tanks, bins hoppers and conveyors. The unique neoprene
isolation pad accommodates vibration, thermal expansion and alignment. Ideal for indoor or outdoor process control
applications
Applications:
STEEL LOAD CELL
LOAD CELL
LOAD CELL
-Page 47–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-82M-MS MOUNT FOR CG-23 SHEAR BEAMS-
Redundant sealing | Spherical washer design | Articulating mounting plate | Integral height adjustment for balancing.
| Adjustable under load
Applications:
Industrial Automation Conveyors
Mechanical Scale Conversions Light to Medium-capacity Tanks and Hopper
STEEL LOAD CELL
LOAD CELL
LOAD CELL
CG-82M-250lb-MS 250lb $395.00 CG-82M-250lb-MS-3 750lb $1,185.00 CG-82M-250lb-MS-4 1,000lb $1,580.00
CG-82M-2.5K-MS 2.5Klb $395.00 CG-82M 2.5K-MS-3 7,500lb $1,185.00 CG-82M-2.5K-MS-4 10,000lb $1,580.00
CG-82M-4K-MS 4Klb $395.00 CG-82M 4K-MS-3 1,200lb $1,185.00 CG-82M-4K-MS-4 10,000lb $1,580.00
CG-82M-5KLE-MS 5K $590.00 CG-82M-5KLE-MS-3 15,000lb $1,770.00 CG-82M-5KLE-MS-4 20,000lb $2,360.00
CG-82M-10K-MS 10K $590.00 CG-82M-10K-MS-3 30,000lb $1,770.00 CG-82M-10K-MS-4 40,000lb $2,360.00
-Page 48–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-23/23-1 STAINLESS STEEL SINGLE ENDED SHEAR BEAM LOAD CELL-
The model CG-23 is a versatile Load Cell designed for multiple use in low profile and platform scales as well
as tank, bin, and hopper weighing systems. The stainless steel construction ensures durability and precision
performance. The cell is environmentally protected with water resistant seal and to assure resistance against
corrosion. Mounting hardware is also available.
The cell is supplied with an integral 20 foot cable
 Model CG-23-SS threaded hole / Model CG-23-1-SS Non–Threaded hole 250 to 20K pounds capacities
 Complete environmental protection IP-67 NTEP certified versions available for class III / III L 5000 divisions
 Factory Mutual (F.M.) Approved  Stainless Steel welded version available
 See Page 50 (CG-23M-SS), 51 (CG-59M-SS) and 52 (CG82M-SS) for mounting hardware respective of application.
PRODUCT NO. CAPACITY ACCURACY CLASS ENVELOPE LIST PRICE
CG-23-SS-100 lb 100 lb NON-NTEP SMALL ENVELOPE $265.00
CG-23-SS-250lb, 500 lb 250 lb, 500 b NTEP 1:500, CLASS III MULTIPLE CELL SMALL ENVELOPE $265.00
CG-23-SS-1K,1.5K, 2K, 2.5K, 4K, 5KSE 1K, 1.5K, 2K, 2.5K, 4K, 5KSE NTEP 1:500, CLASS III MULTIPLE CELL SMALL ENVELOPE $265.00
CG-23-SS-5K LE, 10K 5,000 lb1, 10,000lb NTEP 1:500, CLASS III MULTIPLE CELL LARGE ENVELOPE $330.00
CG-23-SS-15K, 20K 15,000 lb, 20,000lb NTEP 1:500, CLASS III MULTIPLE CELL LARGE ENVELOPE $645.00
ANYLOAD 563YS30
ARTECH SS30310 /SS30210
CELTRON/VISHAY SQB SS
HBM B35
OPTIMA SENSORS OP-310SS (STARTS AT 100lb)
REVERE-TRANSDUCERS/VISHAY 9123
RICE LAKE WEIGHING SYSTEMS RL35023S/RL39123
SENSORTONICS/VISHAY 65023S
TRANSCELL SBSB (1K-10K ONLY)
NOTE:
CG-23-1 SIGNIFIES NON- THREADED LOAD HOLE
-Page 49–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-23M-SS MOUNT FOR CG-23-SS SHEAR BEAMS-
The CG-23M-SS Series utilizes several Coti Global components to provide an unmatched level of performance in
tank and hopper weighing applications and mechanical scale conversions, is designed to utilize single ended shear
beams for tank and hopper weighing. The module is available in either mild steel or stainless steel.
Center pivoted tension loading | Spherical washer design | Self-checking movement | Easy installation | Adjustable
height | shock load protection | thermal expansion & contraction
3 OR 4 EA. CG-23M-SS Weigh Module Assemblies with CG-23 SS NTEP LOAD CELLS
Applications:
CG-23M-SS ASSEMBLY WITH SINGLE MODULE WITH
STAINLESS STEEL LOAD CELL
CG-23M-SS ASSEMBLY WITH 3 MODULE WITH STAINLESS
STEEL LOAD CELL
STEEL LOAD CELL
CG-23M-250lb-SS 250lb $790.00 CG-23M-250lb-SS-3 750lb $2,370.00 CG-23M-250lb-MS-4 1,000lb $3,160.00
CG-23M-500lb-SS 500lb $790.00 CG-23M-500lb-SS-3 1,500lb $2,370.00 CG-23M-500lb-SS-4 2,000lb $3,160.00
CG-23M-1K-SS 1Klb $790.00 CG-23M-1K-SS-3 3,000lb $2,370.00 CG-23M-1K-SS-4 4,000lb $3,160.00
CG-23M-1.5K-SS 1.5Klb $790.00 CG-23M-1.5K-SS-3 4,500lb $2,370.00 CG-23M-1.5K-SS-4 6,000lb $3,160.00
CG-23M-5KSE-SS 5KSElb $790.00 CG-23M-5KSE-SS-3 15,000lb $2,370.00 CG-23M-5KSE-SS-4 20,000lb $3,160.00
CG-23M 5KLE-SS 5K $880.00 CG-23M 5KLE-SS-3 15,000lb $2,640.00 CG-23M 5KLE-SS-4 20,000lb $3,520.00
CG-23M -10K-SS 10K $880.00 CG-23M -10K-SS-3 30,000lb $2,640.00 CG-23M -10K-SS-4 40,000lb $3,520.00
-Page 50–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-59M-SS NEOPRENE ISOLATION MOUNT FOR CG-23-SS SHEAR BEAMS-
The CG-59M Neoprene Isolation Mount Series utilizes several Coti Global components to provide an unmatched level
of performance in tank and hopper weighing applications and mechanical scale conversions, is designed to utilize
single ended shear beams for tank and hopper weighing. The module is available in either mild steel or stainless steel
The CG-59M is designed for use in light to medium capacity tanks, bins hoppers and conveyors. The unique neoprene
isolation pad accommodates vibration, thermal expansion and alignment. Ideal for indoor or outdoor process control
applications
3 OR 4 EA. CG-59M-SS Weigh Module Assemblies with CG-23-SS NTEP LOAD CELLS
Applications:
STEEL LOAD CELL
STEEL LOAD CELL
-Page 51–

Monarch Transducers
Cel: 951-729-9262
Weighing Assemblies
WITHOUT NOTICE.
-CG-82M-SS MOUNT FOR CG-23 SS SHEAR BEAMS-
Redundant sealing | Spherical washer design | Articulating mounting plate | Integral height adjustment for balancing.
| Adjustable under load
3 OR 4 EA. CG-82M-SS Weigh Module Assemblies with CG-23-SS NTEP LOAD CELLS
Applications:
Industrial Automation Conveyors
Mechanical Scale Conversions Light to Medium-capacity Tanks and Hopper
CG-82M-MS ASSEMBLY WITH 3 MODULE WITH STAINLESS
STEEL LOAD CELL
CG-82M-MS ASSEMBLY WITH 4 MODULE WITH STAINLESS
STEEL LOAD CELL
CG-82M-250lb-SS 250lb $675.00 CG-82M-250lb-SS-3 750lb $2,025.00 CG-82M-250lb-SS-4 1,000lb $2,700.00
CG-82M-2.5K-SS 2.5Klb $675.00 CG-82M 2.5K-SS-3 7,500lb $2,025.00 CG-82M-2.5K-SS-4 10,000lb $2,700.00
CG-82M-4K-SS 4Klb $675.00 CG-82M 4K-SS-3 1,200lb $2,025.00 CG-82M-4K-SS-4 10,000lb $2,700.00
CG-82M-5KLE-SS 5K $855.00 CG-82M-5KLE-SS-3 15,000lb $2,565.00 CG-82M-5KLE-SS-4 20,000lb $3,420.00
CG-82M-10K-SS 10K $855.00 CG-82M-10K-SS-3 30,000lb $2,565.00 CG-82M-10K-SS-4 40,000lb $3,420.00
CG-82M-15K-SS 15K $1,335.00 CG-82M-15K-SS-3 45,000lb $4,005.00 CG-82M-15K-SS-4 60,000lb $5,340.00
CG-82M-20K-SS 20K $1,335.00 CG-82M-20K-SS-3 60,000lb $4,005.00 CG-82M-20K-SS-4 80,000lb $5,340.00
-Page 52–

Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved)

Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved)

Recommended

Recommended

More Related Content

Similar to Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved)

Similar to Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved) (20)

Monarch Transducers 2017 LOAD CELL CATALOG 01-01-17 (Autosaved)