Molarity = moles/Volume in litre so, find moles of CH3COOH reacted and then
find molarity
Solution
Molarity = moles/Volume in litre so, find moles of CH3COOH reacted and then
find molarity.
First of all, the image is missing.. Still your very first questio.pdfankkitextailes
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness.
Solution
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness..
a. FunctionFunctions in SQL server are reusable. They can accept i.pdfankkitextailes
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped
Solution
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped.
7 steps are required as 9 is the 7th element and the search is linea.pdfankkitextailes
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr
Solution
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr.
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-
Solution
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-.
First of all, the image is missing.. Still your very first questio.pdfankkitextailes
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness.
Solution
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness..
a. FunctionFunctions in SQL server are reusable. They can accept i.pdfankkitextailes
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped
Solution
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped.
7 steps are required as 9 is the 7th element and the search is linea.pdfankkitextailes
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr
Solution
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr.
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-
Solution
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-.
4P + 5O2 = P4O10 molar ratio of P to O = 45 mole.pdfankkitextailes
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol
Solution
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol.
1. “Internal auditors support managements efforts to establish a.pdfankkitextailes
1. “Internal auditors support management\'s efforts to establish a culture that embraces ethics,
honesty, and integrity. They assist management with the evaluation of internal controls used to
detect or mitigate fraud, evaluate the organization\'s assessment of fraud risk, and are involved in
any fraud investigations.The audit committee is responsible for overseeing controls to prevent or
detect management fraud.
Internal Audit standards regarding role of Internal Auditor with respect to fraud risk management
1.IIA Standard 1200: Proficiency and Due Professional Care 1210.A2 – “Internal auditors must
have sufficient knowledge to evaluate the risk of fraud and the manner in which it is managed by
the organization, but are not expected to have the expertise of a person whose primary
responsibility is detecting and investigating fraud”.
2.IIA Standard 1220: Due Professional Care 1220.A1 – “Internal auditors must exercise due
professional care by considering the: … Probability of significant errors, fraud, or
noncompliance.
3.IIA Standard 2060: Reporting to Senior Management and the Board “The chief audit executive
(CAE) must report periodically to senior management and the board on the internal audit
activity’s purpose, authority, responsibility, and performance relative to its plan. Reporting must
also include significant risk exposures and control issues, including fraud risks, governance
issues, and other matters needed or requested by senior management and the board.”
4.IIA Standard 2120: Risk Management 2120.A2 – “The internal audit activity must evaluate the
potential for the occurrence of fraud and how the organization manages fraud risk.”
5.IIA Standard 2210: Engagement Objectives 2210.A2 – “Internal auditors must consider the
probability of significant errors, fraud, noncompliance, and other exposures when developing the
engagement objectives.
2.)Crazy Eddie Inc. was a family-run, consumer electronics chain that went public in 1984 and
built itself on a massive fraud scheme. They employed a wide variety of deceptive practices and
outright fraud, and conspired to fool their auditors over the course of many years (which is all
described in fascinating detail on Sam\'s website). In 1987, they experienced a hostile takeover
from some investors. And since that time, Sam has become an expert witness, served his jail
time, and regularly speaks about white collar fraud. The fundamental problem at Crazy Eddie
was a tone at the top at the company from the beginning. Even while Sam was a college
accounting student he was helping the family skim money off the business and cook the books.
The company started as a small family business, so they would be able generally to trust each
other and many people were doing jobs for which they were not really qualified.
Internal control was pivotal in uncovering the scandal
1.Use a system of checks and balances to ensure no one person has control over all parts of a
financial transaction.
2.Reconcile agency ba.
z= e^(1-i3) = e.e^(-i3)we know that e^-ix = cos x - i sin xso .pdfankkitextailes
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2
Solution
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2.
x = 1; maxn = 50; epsilon = 1; xval = x; n = 0; start pro.pdfankkitextailes
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x
Solution
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x.
Wild typeDeletion MutantApart from these bands, probe will sho.pdfankkitextailes
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs
Solution
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs.
The Fraud triangle is a framework designed to explain the reasoning .pdfankkitextailes
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the individual as unsolvable by orthodox, legal,
sanctioned routes and unshareable with others who may be able to offer assistance. A common
example of a perceived unshareable financial problem is gambling debt. Maintenance of a
lifestyle is another common example.
Step 2 – the opportunity to commit fraud – is the means by which the individual will defraud the
organisation. In this stage the worker sees a clear course of action by which they can abuse their
position to solve the perceived unshareable financial problem in a way that – again, perceived by
them – is unlikely to be discovered. In many cases the ability to solve the problem in secret is
key to the perception of a viable opportunity.
Step 3 – the ability rationalise the crime – is the final stage in the fraud triangle. This is a
cognitive stage and requires the fraudster to be able to justify the crime in a way that is
acceptable to his or her internal moral compass. Most fraudsters are first-time criminals and do
not see themselves as criminals, but rather a victim of circumstance. Rationalisations are often
based on external factors, such as a need to take care of a family, or a dishonest employer which
is seen to minimise or mitigate the harm done by the crime.
The key to dealing with fraud is to focus on prevention. It is cheaper and more effective to
prevent fraud from happening than it is to try to detect the crime. By the time the fraud is
discovered, the money is gone and chances are slim to none that it will be recovered.
Additionally, it is costly and time consuming to investigate a fraud.
Perhaps the most important lesson of the fraud triangle is that all three factors must normally be
present for fraud to occur. If any one of the three elements is missing, fraud may not occur.
The key to dealing with fraud is to focus on the prevention of opportunity. It is much less
expensive and more effective to prevent fraud from happening than it is to try to detect the crime.
Solution
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the indiv.
SumNumbers.java import java.util.Scanner;public class SumNumbe.pdfankkitextailes
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45
Solution
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45.
The absorptivity, The transmissivity and reflectivity are given by.pdfankkitextailes
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick enough that they can be considered
opaque reducing equation 1 to:
+ = 1 (2)
Reflectivity deviates from the other properties in that it is bidirectional in nature. In other words,
this property depends on the direction of the incident of radiation as well as the direction of the
reflection. Therefore, the reflected rays of a radiation spectrum incident on a real surface in a
specified direction forms an irregular shape that is not easily predictable. In practice, surfaces are
assumed to reflect in a perfectly specular or diffuse manner. In a specular reflection, the angles
of reflection and incidence are equal. In diffuse reflection, radiation is reflected equally in all
directions. Reflection from smooth and polished surfaces can be assumed to be specular
reflection, whereas reflection from rough surfaces approximates diffuse reflection.
Considering this given object as an opaque substance, The value of transmissivity is zero
So, the Absorptivity + Reflectivity = 1---(3)
Assuming 100% emmitance of the absorbed body
We get the value of Absorptivity = value of Emmisivity = 0.7
So, from equation (3)
Reflectivity = 1 - Absorptivity
Reflectivity = 1 - 0.7 = 0.3
Heat Rate Reflected per unit area is given by:
Gref = G * Reflectivity = 1000 *0.3 = 300 W/m2
So, The Rate Reflected per unit area is Gref 300 W/m2
Solution
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick .
Curly brackets mean exactly the same as ordinary parentheses in thi.pdfankkitextailes
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form
Solution
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form.
Solution (A)Nowadays Sugar is not listed directly by name suga.pdfankkitextailes
Solution
:
(A)Nowadays Sugar is not listed directly by name \"sugar\" on an ingredients list.It is listed by
name like dextrose,high-fructose corn syrup and carob syrup on an ingredient list.These are
called added sugar.Uptake of excess sugar is the main cause of many sugar related diseases like
diabetes.So,manufacturer hide the amount of total sugar added in ingredient by not mentioning it
directly and make it unrecognizable to the public..
RNA sequencing also known as next generation genome sequencing and t.pdfankkitextailes
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks.
Solution
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks..
option b ,here return type is int and the Logical operator OR us.pdfankkitextailes
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases.
Solution
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases..
RbF because lattice energy is inversly proportio.pdfankkitextailes
RbF because lattice energy is inversly proportional to the radii of the ions present..
Solution
RbF because lattice energy is inversly proportional to the radii of the ions present...
Pete Best (born 24 November 1941) is a British mu.pdfankkitextailes
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren.
Solution
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren..
NaOH is a strong electrolyte i.e. it is highly so.pdfankkitextailes
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water.
Solution
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water..
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
4P + 5O2 = P4O10 molar ratio of P to O = 45 mole.pdfankkitextailes
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol
Solution
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol.
1. “Internal auditors support managements efforts to establish a.pdfankkitextailes
1. “Internal auditors support management\'s efforts to establish a culture that embraces ethics,
honesty, and integrity. They assist management with the evaluation of internal controls used to
detect or mitigate fraud, evaluate the organization\'s assessment of fraud risk, and are involved in
any fraud investigations.The audit committee is responsible for overseeing controls to prevent or
detect management fraud.
Internal Audit standards regarding role of Internal Auditor with respect to fraud risk management
1.IIA Standard 1200: Proficiency and Due Professional Care 1210.A2 – “Internal auditors must
have sufficient knowledge to evaluate the risk of fraud and the manner in which it is managed by
the organization, but are not expected to have the expertise of a person whose primary
responsibility is detecting and investigating fraud”.
2.IIA Standard 1220: Due Professional Care 1220.A1 – “Internal auditors must exercise due
professional care by considering the: … Probability of significant errors, fraud, or
noncompliance.
3.IIA Standard 2060: Reporting to Senior Management and the Board “The chief audit executive
(CAE) must report periodically to senior management and the board on the internal audit
activity’s purpose, authority, responsibility, and performance relative to its plan. Reporting must
also include significant risk exposures and control issues, including fraud risks, governance
issues, and other matters needed or requested by senior management and the board.”
4.IIA Standard 2120: Risk Management 2120.A2 – “The internal audit activity must evaluate the
potential for the occurrence of fraud and how the organization manages fraud risk.”
5.IIA Standard 2210: Engagement Objectives 2210.A2 – “Internal auditors must consider the
probability of significant errors, fraud, noncompliance, and other exposures when developing the
engagement objectives.
2.)Crazy Eddie Inc. was a family-run, consumer electronics chain that went public in 1984 and
built itself on a massive fraud scheme. They employed a wide variety of deceptive practices and
outright fraud, and conspired to fool their auditors over the course of many years (which is all
described in fascinating detail on Sam\'s website). In 1987, they experienced a hostile takeover
from some investors. And since that time, Sam has become an expert witness, served his jail
time, and regularly speaks about white collar fraud. The fundamental problem at Crazy Eddie
was a tone at the top at the company from the beginning. Even while Sam was a college
accounting student he was helping the family skim money off the business and cook the books.
The company started as a small family business, so they would be able generally to trust each
other and many people were doing jobs for which they were not really qualified.
Internal control was pivotal in uncovering the scandal
1.Use a system of checks and balances to ensure no one person has control over all parts of a
financial transaction.
2.Reconcile agency ba.
z= e^(1-i3) = e.e^(-i3)we know that e^-ix = cos x - i sin xso .pdfankkitextailes
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2
Solution
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2.
x = 1; maxn = 50; epsilon = 1; xval = x; n = 0; start pro.pdfankkitextailes
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x
Solution
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x.
Wild typeDeletion MutantApart from these bands, probe will sho.pdfankkitextailes
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs
Solution
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs.
The Fraud triangle is a framework designed to explain the reasoning .pdfankkitextailes
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the individual as unsolvable by orthodox, legal,
sanctioned routes and unshareable with others who may be able to offer assistance. A common
example of a perceived unshareable financial problem is gambling debt. Maintenance of a
lifestyle is another common example.
Step 2 – the opportunity to commit fraud – is the means by which the individual will defraud the
organisation. In this stage the worker sees a clear course of action by which they can abuse their
position to solve the perceived unshareable financial problem in a way that – again, perceived by
them – is unlikely to be discovered. In many cases the ability to solve the problem in secret is
key to the perception of a viable opportunity.
Step 3 – the ability rationalise the crime – is the final stage in the fraud triangle. This is a
cognitive stage and requires the fraudster to be able to justify the crime in a way that is
acceptable to his or her internal moral compass. Most fraudsters are first-time criminals and do
not see themselves as criminals, but rather a victim of circumstance. Rationalisations are often
based on external factors, such as a need to take care of a family, or a dishonest employer which
is seen to minimise or mitigate the harm done by the crime.
The key to dealing with fraud is to focus on prevention. It is cheaper and more effective to
prevent fraud from happening than it is to try to detect the crime. By the time the fraud is
discovered, the money is gone and chances are slim to none that it will be recovered.
Additionally, it is costly and time consuming to investigate a fraud.
Perhaps the most important lesson of the fraud triangle is that all three factors must normally be
present for fraud to occur. If any one of the three elements is missing, fraud may not occur.
The key to dealing with fraud is to focus on the prevention of opportunity. It is much less
expensive and more effective to prevent fraud from happening than it is to try to detect the crime.
Solution
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the indiv.
SumNumbers.java import java.util.Scanner;public class SumNumbe.pdfankkitextailes
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45
Solution
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45.
The absorptivity, The transmissivity and reflectivity are given by.pdfankkitextailes
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick enough that they can be considered
opaque reducing equation 1 to:
+ = 1 (2)
Reflectivity deviates from the other properties in that it is bidirectional in nature. In other words,
this property depends on the direction of the incident of radiation as well as the direction of the
reflection. Therefore, the reflected rays of a radiation spectrum incident on a real surface in a
specified direction forms an irregular shape that is not easily predictable. In practice, surfaces are
assumed to reflect in a perfectly specular or diffuse manner. In a specular reflection, the angles
of reflection and incidence are equal. In diffuse reflection, radiation is reflected equally in all
directions. Reflection from smooth and polished surfaces can be assumed to be specular
reflection, whereas reflection from rough surfaces approximates diffuse reflection.
Considering this given object as an opaque substance, The value of transmissivity is zero
So, the Absorptivity + Reflectivity = 1---(3)
Assuming 100% emmitance of the absorbed body
We get the value of Absorptivity = value of Emmisivity = 0.7
So, from equation (3)
Reflectivity = 1 - Absorptivity
Reflectivity = 1 - 0.7 = 0.3
Heat Rate Reflected per unit area is given by:
Gref = G * Reflectivity = 1000 *0.3 = 300 W/m2
So, The Rate Reflected per unit area is Gref 300 W/m2
Solution
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick .
Curly brackets mean exactly the same as ordinary parentheses in thi.pdfankkitextailes
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form
Solution
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form.
Solution (A)Nowadays Sugar is not listed directly by name suga.pdfankkitextailes
Solution
:
(A)Nowadays Sugar is not listed directly by name \"sugar\" on an ingredients list.It is listed by
name like dextrose,high-fructose corn syrup and carob syrup on an ingredient list.These are
called added sugar.Uptake of excess sugar is the main cause of many sugar related diseases like
diabetes.So,manufacturer hide the amount of total sugar added in ingredient by not mentioning it
directly and make it unrecognizable to the public..
RNA sequencing also known as next generation genome sequencing and t.pdfankkitextailes
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks.
Solution
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks..
option b ,here return type is int and the Logical operator OR us.pdfankkitextailes
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases.
Solution
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases..
RbF because lattice energy is inversly proportio.pdfankkitextailes
RbF because lattice energy is inversly proportional to the radii of the ions present..
Solution
RbF because lattice energy is inversly proportional to the radii of the ions present...
Pete Best (born 24 November 1941) is a British mu.pdfankkitextailes
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren.
Solution
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren..
NaOH is a strong electrolyte i.e. it is highly so.pdfankkitextailes
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water.
Solution
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water..
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Molarity = molesVolume in litre so, find moles o.pdf
1. Molarity = moles/Volume in litre so, find moles of CH3COOH reacted and then
find molarity
Solution
Molarity = moles/Volume in litre so, find moles of CH3COOH reacted and then
find molarity