The document summarizes the physical properties of MIL-PRF-131 Class I Type I barrier packaging material called Protect 200. It has a caliper of 10.3 mil, yield of 2,650 in2/lb, and puncture resistance of 40 lbs. The material is biaxially oriented nylon/PE/cross-laminated PE/PE/foil/heavy duty coextruded with a water vapor transmission rate of 0.0005 cc/100in2/day and water vapor transmission rate of 0.0005 g/100in2/day. It has a seal strength of 23 lbs/in and is suggested to be heat sealed at 435°F, 60psi, and 3.

1. MIL-PRF-131 CLASS I TYPE I
PHYSICAL PROPERTIES
PROTECT 200
Super Heavy Duty Barrier Packaging: Watervaporproof, Greaseproof,
Flexible, Heat-Sealable
Structure description: Biax Nylon/PE/Cross-Lam PE/PE/Foil/Heavy
Duty Coex
PHYSICAL PROPERTIES: MIL-PRF-131
PROPERTY TYPICAL UNITS TEST
VALUES METHOD
Caliper 10.3 mil ASTM D2103
Yield 2,650 in2/lb Calculated
Puncture 40 lbs FED STD 101
Resistance
Tensile 48 lbs/in ASTM D882
Strength
Tear Strength >1,000 grams ASTM D1922
2
OTR 0.0005 cc/100 in /ASTM D3985
day @0%
RH, 23°C
WVTR 0.0005 g/100 ASTM F1249
2
in /day
@ 90%
RH 40°C
Seal Strength 23 lbs/in ASTM F88
Suggested
Sealing 435°F, 60psi, 3.0sec
Conditions
Disclaimer

2. The data presented refers to typical values only and should serve only as a guide and does
not encompass normal variability, or constitute any warranty. We urge purchasers to
conduct tests for suitability in their specific end use.
About Protective Packaging Corporation
Protective Packaging provides military spec packaging, export packaging, corrosion
protection, moisture barrier bags and a variety of other protective packaging solutions.
Protective Packaging Corporation 1746 W. Crosby Road Bldg. 108 Carrollton, Texas 75006 p:
1-800-644-4032 f: 972.446.2176
http://www.protectivepackaging.net/