Mike Harry is the owner of Interactive-Hardware and presented several interactive hardware concepts and projects, many of which are covered by non-disclosure agreements. The concepts shown include large format touch tables for both custom and entertainment venue use, dual sided information portals, projection effect rigs for floors and walls, and mobile rear projection units for vacant retail spaces. Harry is available to discuss potential interactive system projects and the prototype concepts displayed.

1. Mike Harry Interactive-Hardware The majority of projects that I undertake are covered by NDA agreements, but here are a few concept and project renders that are not.

2. Large format custom touch table Multi-module linear touch table, high resolution, active thermal management Optional outboard rack for computer, video scaling, edge-blending

3. Entertainment venue touch table Compact 60” diagonal Entertainment Venue touch table Multiple options for exterior finish / cover

4. EV Table module with different “skin” Entertainment Venue touch table showing one of the optional 60” module covers

5. Dual sided 80-100” info pod Dual sided information portal, anchored sub-frame and vented, panelled enclosure V2 shown has small form factor touch surfaces to drive large image (cost reduction)

6. Universal floor / wall effect rig Projection effect enclosure utilising AV standard mounts and NPT fittings Camera, graphics and audio over dual cat5 from remote PC Removable mirror and rotatable camera tracking module for wall mode operation

7. Compact floor/wall effect unit Compact, self contained floor, wall or table top interactive projection effect unit V1 prototype shown, new v2 version available, much smaller and lighter V2 is not yet a commissioned project or secured under NDA - available

8. Heavy duty floor / wall effect chassisfor 15,000 Lumen projector Flying rig for heavy projector unit, self contained unit when fully loaded Anchors onto standard 12” or 18” box lighting truss with industry standard clamps.

9. Eight TV flying rig chassis Commissioned TV rig design for entertainment venue. Design brief requirement of no custom hardware. All existing commercial components.

10. Eight TV flying rig - loaded TV flying rig designed to match exact length and required tilt angle of flat panels.

11. Vacant retail window large formatshort throw mobile projection unit Collapsible mobile large format rear projection unit. Fits through standard single door. Rig hardware fits inside rolling case. Designed for use in vacant retail storefronts, can be set up and taken down by one person.

12. Vacant retail window rear projection Achieves a 12ft x 9ft interactive window image from a throw distance of only 7ft

13. Custom hardware / prototypes 4ft wide overhead dual camera Tracking bar prototype unit Custom built curved IR emitter Array, single section shown

14. Mike Harry Mike.h@Interactive-Hardware.com Thanks for taking the time to look through the work presentation. I have many more designs and solutions, but they are covered under Non-Disclosure Agreements, so I do not release ANY of the details or renders. If you have a interactive systems project I can assist with, or would like to discuss one of the concept and prototype units shown here, feel free to drop me a line at the email address shown above