Michael Iadonisi has over 20 years of experience as an electronics technician and manufacturing engineer, with expertise in debugging and repairing both digital and analog electronics, including microprocessor circuitry. He has worked for several companies, taking on roles that involve diagnosing complex issues, improving quality, and training others. His skills include prototype building, fiber optic networks, analytical troubleshooting, and using various testing tools and software.

1. MICHAEL J. IADONISI
11 Royal Crest Drive, Apt. 10 • Nashua, NH 03060
978.551.2357 • iadonism@gmail.com
Career Profile:
Over twenty years of experience as an electronics technician and manufacturing engineer.Expertise includes
hands-on repair work, component level debug and fault recognition and repair of a both digital and analog
electronics. Circuitry debugged included, microprocessor based circuitry and associated support hardware,fiber
optic & network electronics, powersupplies and more.Demonstrated ability to formulate and implement solutions
to complex technical problems, reducing the amount of scrap and improving overall manufacturing quality and
margins. Exceptional level of proficiency using debugging tools and software applications.
AREAS OF STRENGTH
▪ Prototype building
▪ Fiber Optic Networks
▪ Debugging
▪ Analytical & Methodical
▪ Communication Skills
▪ Team Building & Training
▪ Process Improvements
▪ MS Office (Word, Excel)
▪ Client Relations
PROFESSIONAL EXPERIENCE
Benchmark Electronics, Nashua, NH 2010 to Present
Senior Debug Technician
▪ Hired from contract position with Davis Companies to a permanent position
primarily to debug Mercury’s complex product line of computer and network electronics.
Asked to debug Arris (formerly Bigband) product line after successfully completing
Mercury project. Arris manufactures RF products for the cable industry. Worked primarily
with 8-channel, 32 quam modules until Arris moved its manufacturing to Mexico.
▪ Assigned to diagnose Acacia high-speed fiber optic modules including debugging
and repairing 100G, & 400 G, 100 channel laser optics cards and associated electronics.
▪ Prioritized work flow, including RMAs. Worked closely with engineering department to
gather specifications or additional information needed to diagnose faults.
▪ Testing and tracking tools utilized included PFS, Agile, oscilloscopes,frequency
generators, DVMs, low ohm meters, Fab-master graphics and similar CAD programs.
Mack Technologies, Nashua, NH 2007 to 2009
Senior Debug Technician
▪ Test. Troubleshoot and debug at the component level a variety of products built by
Mack Tech, including RFID tags, aeronautical electronics, telnet products and high-end
amplifiers. Brands supported include Avidyne, Ntag and Harman Services Group.
▪ Worked closely with test engineers when doing complex circuit analysis and used
standard electronic test equipment such as scopes, logic analyzers, spectrum analyzers,
meters and low ohm meters.
▪ Communicated results and suggested corrective or preventative measures to
different departments in order to improve overall quality of daily manufacturing runs.
R/D Tech Instruments, Waltham, MA 2004 to 2005
Senior Electronics Technician
▪ Component level debug and repair of ultrasonic gages and flaw detectors
containing the following technologies: RF analog receivers, pulse circuits, digital logic and

2. sampling circuits, microprocessors with associated memory and other peripherals, power
supplies, battery chargers, keyboards, displays and interfaces between assemblies.
▪ Employed various diagnostic programs to isolate and debug component-level faults.
▪ Recalibrated instruments using various transducers, contingent on materials (e.g.
Teflon, stainless steel, etc.)
▪ Worked closely with the Customer Service Repair Department supporting efforts to
deliver high-quality customer service and satisfaction..
Jabil Circuit, Billerica, MA 2000 to 2001
Test Engineer
▪ Supported a team of electronics technicians performing component level fault
isolation, troubleshooting and repair of many complex network products.
▪ Discovered a novel method of uncovering otherwise non-detectable opens
underneath ball-grid array ICs. This process was also utilized by other technical staff.
▪ Trained staff in procedures and how to utilize test equipment such as oscilloscopes,
multimeters, logic analyzers, etc.
▪ Coordinated staff efforts, monitored progress and set priorities.
▪ Did hands-on repair and rework of defective modules.
Bay Networks, Andover, MA 1998 to 1999
Senior Engineering Technician
▪ Led testing, troubleshooting and component-level repair of cable modem head-end
PC boards project from its inception through release to Manufacturing.
▪ Implemented ECOs, software upgrades, hardware upgrades and developed user-
friendly test procedures for manufacturing.
▪ Trained a team of test technicians responsible for maintaining production quality
control.
Additional Work Experience: Contract Employment 1990 - 2015
Worked in various capacities as an Engineer or technician, building prototypes, testing or
performing component-level debugging, updating procedures, etc. for the following firms:
Westell Rf technology Polaroid Digital cameras
Hewlett Packard Medical electronics Crossbeam Network modules
Lockheed Martin Space electronics Celestica ICT technician
Awards & Recognition
Recognized for Excellence by Polaroid Corporation
Education
GTE Sylvania Tech, Waltham MA
Certification, Computer Electronics
Additional certification achieved at Celestica for soldering
Received: National Career Readiness Certificate