M#1 50 hp 07-25-13
•
0 likes•219 views
This document contains technical specifications for circuit breaker CBL-AHU-S2 and motor overload protection for a 50HP air handling unit motor. It lists the circuit breaker trip settings as 125A with a 5x instantaneous trip of 625A. It also lists the motor overload protection as Class 20 for a 50HP motor served by circuit breaker CB-AHU-S2.
Report
Share
Report
Share
Download to read offline
Recommended
M#3 75 hp 07-25-13
This document contains specifications for circuit breaker CBL-AHU-S3 and motor overload protection for a 75HP air handling unit motor (AHU-S3 M#3). It lists the trip current ratings and thermal overload settings for the circuit breaker and overload protection. It also includes short circuit current ratings and identifies the motor and associated soft starter as a 75HP unit.
ADAPTOR
The document lists various spare part adapters including their article numbers, item numbers, and descriptions. Adapters are listed for appliances like scales, power cords, and voltage converters for different countries. Item numbers start with 06 and are followed by additional model-specific codes to identify each adapter's application.
SBD Simulation using HSPICE
The document describes a 600V/12A silicon diode (SBD1) from manufacturer Honda. It provides:
1) The diode's part number and manufacturer.
2) Its voltage and current ratings of 600V and 12A.
3) SPICE model parameters for simulating the diode's electrical behavior.
NDDC HQ HVAC 5TH FLR elect load REV 2 (1)
The document lists HVAC equipment specifications and sizes for multiple floors of a building. It includes the horsepower or kilowatt ratings of air handling units, fans, and other HVAC equipment on the ground floor, 1st floor, 2nd floor, 3rd floor, 4th floor, 5th floor, 6th floor, 7th floor, 8th floor, 9th floor, 10th floor, and 11th floor. Pipe sizes are also specified. The total kilowatt ratings for some floors are calculated.
SBD2 Simulation using HSPICE
The document describes a 600V/16A silicon diode (SBD2) from manufacturer Honda:
- It has a forward voltage (Von) of -1.4V at 12A and a reverse voltage rating (Vr) of -600V.
- The SPICE model parameters and equations for the diode are provided.
- Several circuit simulations are shown to characterize the diode's current-voltage, capacitance-voltage, reverse recovery time, and reverse leakage current relationships.
A general overview of the Azipods of the Koningsdam
The document summarizes the installation and configuration of two Azipod propulsion units on the MS Koningsdam cruise ship. It details the Azipod specifications and photos of their construction, transport, and installation. Procedures for safely entering different areas of the Azipods are also outlined, including isolation requirements and use of ladders and hatches.
proposed nine units
This document contains technical specifications and load calculations for electrical panels and distribution boards to provide power to cold storage warehouses. It includes details of the panel locations, main switches, feeder cables, connected loads and demand calculations for each distribution board. The total calculated demand for cold units, lighting and other loads for each warehouse is summarized.
Lab 2 amplitude modulation
This document contains a circuit schematic for amplitude modulation. It shows a carrier signal generated by one voltage source being modulated by two lower frequency signals from other voltage sources. The output of the modulation circuit is measured over time, showing the amplitude of the output signal varying in accordance with the two modulating signals. Simulation data is included showing the output signal amplitude varying over time and with different input frequencies.
Recommended
M#3 75 hp 07-25-13
This document contains specifications for circuit breaker CBL-AHU-S3 and motor overload protection for a 75HP air handling unit motor (AHU-S3 M#3). It lists the trip current ratings and thermal overload settings for the circuit breaker and overload protection. It also includes short circuit current ratings and identifies the motor and associated soft starter as a 75HP unit.
ADAPTOR
The document lists various spare part adapters including their article numbers, item numbers, and descriptions. Adapters are listed for appliances like scales, power cords, and voltage converters for different countries. Item numbers start with 06 and are followed by additional model-specific codes to identify each adapter's application.
SBD Simulation using HSPICE
The document describes a 600V/12A silicon diode (SBD1) from manufacturer Honda. It provides:
1) The diode's part number and manufacturer.
2) Its voltage and current ratings of 600V and 12A.
3) SPICE model parameters for simulating the diode's electrical behavior.
NDDC HQ HVAC 5TH FLR elect load REV 2 (1)
The document lists HVAC equipment specifications and sizes for multiple floors of a building. It includes the horsepower or kilowatt ratings of air handling units, fans, and other HVAC equipment on the ground floor, 1st floor, 2nd floor, 3rd floor, 4th floor, 5th floor, 6th floor, 7th floor, 8th floor, 9th floor, 10th floor, and 11th floor. Pipe sizes are also specified. The total kilowatt ratings for some floors are calculated.
SBD2 Simulation using HSPICE
The document describes a 600V/16A silicon diode (SBD2) from manufacturer Honda:
- It has a forward voltage (Von) of -1.4V at 12A and a reverse voltage rating (Vr) of -600V.
- The SPICE model parameters and equations for the diode are provided.
- Several circuit simulations are shown to characterize the diode's current-voltage, capacitance-voltage, reverse recovery time, and reverse leakage current relationships.
A general overview of the Azipods of the Koningsdam
The document summarizes the installation and configuration of two Azipod propulsion units on the MS Koningsdam cruise ship. It details the Azipod specifications and photos of their construction, transport, and installation. Procedures for safely entering different areas of the Azipods are also outlined, including isolation requirements and use of ladders and hatches.
proposed nine units
This document contains technical specifications and load calculations for electrical panels and distribution boards to provide power to cold storage warehouses. It includes details of the panel locations, main switches, feeder cables, connected loads and demand calculations for each distribution board. The total calculated demand for cold units, lighting and other loads for each warehouse is summarized.
Lab 2 amplitude modulation
This document contains a circuit schematic for amplitude modulation. It shows a carrier signal generated by one voltage source being modulated by two lower frequency signals from other voltage sources. The output of the modulation circuit is measured over time, showing the amplitude of the output signal varying in accordance with the two modulating signals. Simulation data is included showing the output signal amplitude varying over time and with different input frequencies.
Still electric fork truck forklift r60 16 series service repair manual
This workshop manual provides information for performing maintenance work on several truck types, including R6030-R6032 electric forklifts. The manual is valid for all listed truck models. It has been prepared for truck types R6030-R6032 and supplements will be provided for any newer truck types as needed. The document then provides specifications and dimensions for the chassis and counterweights of the different truck models.
Underflow pump
This document contains specifications for two electric motors used to power underflow pumps. It lists the manufacturer, model number, nameplate power rating, voltage, phases, frequency, service factor, NEMA design, synchronous speed, and frame for each motor. Additional information provided includes the motor tags, quantity, reference specifications, and site conditions.
2014年11月度のアップデート(スパイス・パーク)
This document provides an inventory of solar cell parts from various manufacturers stored at Spice Park. It lists 286 total solar cell parts from 17 manufacturers such as Sharp, Kyocera, Suntech Power and Panasonic. For each part, it provides the manufacturer, part number, and date the information was last updated. The document aims to catalog all solar cell parts and related information available at Spice Park.
Hiatchi set free product range vrv Compressors system Designing 919825024651
The Hitachi Set-Free VRF system is available in a range of models from 8 HP to 54 HP for both modular and front-flow outdoor units. The modular units have a top-flow design and dimensions of 950mm x 750mm x 1720mm for smaller models and 1210mm x 750mm x 1720mm for larger ones. The front-flow FSNM series includes 8HP, 10HP and 12HP models with cooling capacities ranging from 22.4kW to 33.5kW and noise levels from 55dB(A) to 61dB(A). The Set-Free VRF system is suitable for applications such as offices, hospitals, hotels and more.
Thomson roundrail 1_dc_specsheet
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
SPICE MODEL of TRS10E65C (Professional Model) in SPICE PARK
This document summarizes the modeling of a SiC Schottky Barrier Diode with part number TRS10E65C from Toshiba. It includes the diode model parameters, comparison graphs of forward and reverse characteristics from circuit simulation and measurement, and less than 5% error between the two. Junction capacitance characteristics are also modeled and compared from 0.1V to 100V with less than 3.5% error.
Saudi Aramco Materials System Specifications (SAMSS) 5
This document appears to be a list of specifications for various industrial equipment and materials from C.A.T. International Co. LTD with reference numbers. It includes specifications for cathodic protection equipment and materials, motors, generators, batteries, uninterruptible power supplies, duct sealants, welding materials, safety gloves, firefighting foams and equipment, oil hoses, control systems, and more. The document also mentions the East/West Pipeline Project Department and Master Gas Pipeline Phase 1 Projects Division located in Camp 4, Binban, Riyadh.
ASYST Parts on sale
ASYST Parts on sale:These are subject to prior slae without notice. Pls email for the availability . Appreciate your time!
Valve
This document provides service data for a high flow relief valve module. It includes a diagram of the module components along with their part numbers. The module is a directional control, subplate mounted relief valve for high flow applications in sizes up to 3/4 inch. It comes in various pressure range and vent spring options and is sealed with F3 seals for use with mineral oil and fire resistant fluids. Proper filtration to an ISO cleanliness code of 18/15 or cleaner is recommended for satisfactory service life.
Ws003 motors calculations-3 phase 480v induction
This document provides sizing calculations for conductors, controllers, overcurrent protection devices (OCPDs), and disconnects for three 3-phase 480V induction motors rated at 50HP, 60HP, and 75HP that are powered from a single feeder. It calculates the maximum demands for each motor including full load current, locked rotor current, branch circuit conductors, overload protection, controllers, OCPDs, disconnects, feeder conductors, feeder OCPD and disconnect to ensure adequate protection and compliance with National Electrical Code standards.
Ws004 motors calculations-240 v dc
This document summarizes the sizing calculations for conductors, overload protection, controllers, and disconnects for three DC motors powered from a single 240V DC feeder. Motor #1 is 10HP with 38A FLC. Motor #2 is 15HP with 55A FLC. Motor #3 is 20HP with 72A FLC. Calculations are shown for branch circuit conductors, overload protection, controllers according to NEC requirements for each motor. Feeder calculations then size conductors to supply all three motors from a common 250A OCPD and 200A disconnect.
Rp ocpd coordination report 07-23-13
This document contains a time-current curve (TCC) analysis for an industrial project with a reference voltage of 480V. It provides details on the circuit breakers, transformers, and cables in the system, including their ratings, settings, and damage/trip curves. The analysis evaluates the fault duty of a bus fault current at the generator circuit breaker CB-GEN2, which is rated for 2000A and has a short-time rating of 65kA.
Ocpd 07-23-13
Overcurrent protection devices like fuses and circuit breakers are required by the NEC to protect electrical conductors and equipment from excessive currents. Fuses and circuit breakers must have voltage and current ratings matching the circuit, as well as interrupting ratings high enough to safely handle short circuits. Special consideration is given to motor, HVAC, and series-rated circuits to prevent nuisance tripping while still providing adequate protection.
Motors & controllers
The document discusses various types of electric motors and motor controllers. It describes squirrel cage induction motors, different types of motor starters including full voltage non-reversing, reduced voltage autotransformer, and variable frequency drives. It also discusses components of variable frequency drives, features of VFDs, inverter rated motors, overload conditions like single phasing and unbalanced voltage, motor protection types, and motor installation requirements.
M#2 60 hp 07-25-13
This document contains technical specifications for circuit breaker CBL-AHU-S1, including its trip current of 200 amps, thermal curve settings, and instantaneous trip setting of 1000 amps. It also lists specifications for a motor overload relay for a 60HP motor protected by this circuit breaker, including its class 20 thermal settings. Ratings are provided for short circuit currents through the circuit breaker in both 3-phase and single-line-to-ground fault configurations.
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
This document provides an electrical one-line diagram for a multi-floor commercial building. It shows the locations and ratings of electrical equipment including utility transformers and meters, switchboards, panelboards, generators, and other components. Electrical equipment is shown on each floor and electrical rooms are labeled. Notes provide information on equipment specifications and installation requirements.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
More Related Content
What's hot
Still electric fork truck forklift r60 16 series service repair manual
This workshop manual provides information for performing maintenance work on several truck types, including R6030-R6032 electric forklifts. The manual is valid for all listed truck models. It has been prepared for truck types R6030-R6032 and supplements will be provided for any newer truck types as needed. The document then provides specifications and dimensions for the chassis and counterweights of the different truck models.
Underflow pump
This document contains specifications for two electric motors used to power underflow pumps. It lists the manufacturer, model number, nameplate power rating, voltage, phases, frequency, service factor, NEMA design, synchronous speed, and frame for each motor. Additional information provided includes the motor tags, quantity, reference specifications, and site conditions.
2014年11月度のアップデート(スパイス・パーク)
This document provides an inventory of solar cell parts from various manufacturers stored at Spice Park. It lists 286 total solar cell parts from 17 manufacturers such as Sharp, Kyocera, Suntech Power and Panasonic. For each part, it provides the manufacturer, part number, and date the information was last updated. The document aims to catalog all solar cell parts and related information available at Spice Park.
Hiatchi set free product range vrv Compressors system Designing 919825024651
The Hitachi Set-Free VRF system is available in a range of models from 8 HP to 54 HP for both modular and front-flow outdoor units. The modular units have a top-flow design and dimensions of 950mm x 750mm x 1720mm for smaller models and 1210mm x 750mm x 1720mm for larger ones. The front-flow FSNM series includes 8HP, 10HP and 12HP models with cooling capacities ranging from 22.4kW to 33.5kW and noise levels from 55dB(A) to 61dB(A). The Set-Free VRF system is suitable for applications such as offices, hospitals, hotels and more.
Thomson roundrail 1_dc_specsheet
This document provides specifications for various side mounted linear guide assemblies with table tops. It includes specifications for different sized linear guides, pillow block bearings, support rails, and table tops. Key specifications listed include part numbers, dimensions, load ratings, and material information. The document explains that Thomson linear guides require specifying the system length as a suffix to the standard part number.
SPICE MODEL of TRS10E65C (Professional Model) in SPICE PARK
This document summarizes the modeling of a SiC Schottky Barrier Diode with part number TRS10E65C from Toshiba. It includes the diode model parameters, comparison graphs of forward and reverse characteristics from circuit simulation and measurement, and less than 5% error between the two. Junction capacitance characteristics are also modeled and compared from 0.1V to 100V with less than 3.5% error.
Saudi Aramco Materials System Specifications (SAMSS) 5
This document appears to be a list of specifications for various industrial equipment and materials from C.A.T. International Co. LTD with reference numbers. It includes specifications for cathodic protection equipment and materials, motors, generators, batteries, uninterruptible power supplies, duct sealants, welding materials, safety gloves, firefighting foams and equipment, oil hoses, control systems, and more. The document also mentions the East/West Pipeline Project Department and Master Gas Pipeline Phase 1 Projects Division located in Camp 4, Binban, Riyadh.
ASYST Parts on sale
ASYST Parts on sale:These are subject to prior slae without notice. Pls email for the availability . Appreciate your time!
Valve
This document provides service data for a high flow relief valve module. It includes a diagram of the module components along with their part numbers. The module is a directional control, subplate mounted relief valve for high flow applications in sizes up to 3/4 inch. It comes in various pressure range and vent spring options and is sealed with F3 seals for use with mineral oil and fire resistant fluids. Proper filtration to an ISO cleanliness code of 18/15 or cleaner is recommended for satisfactory service life.
What's hot (9)
Still electric fork truck forklift r60 16 series service repair manual
Still electric fork truck forklift r60 16 series service repair manual
Hiatchi set free product range vrv Compressors system Designing 919825024651
Hiatchi set free product range vrv Compressors system Designing 919825024651
SPICE MODEL of TRS10E65C (Professional Model) in SPICE PARK
SPICE MODEL of TRS10E65C (Professional Model) in SPICE PARK
Saudi Aramco Materials System Specifications (SAMSS) 5
Saudi Aramco Materials System Specifications (SAMSS) 5
More from Chad Kurdi, P.E.
Ws003 motors calculations-3 phase 480v induction
This document provides sizing calculations for conductors, controllers, overcurrent protection devices (OCPDs), and disconnects for three 3-phase 480V induction motors rated at 50HP, 60HP, and 75HP that are powered from a single feeder. It calculates the maximum demands for each motor including full load current, locked rotor current, branch circuit conductors, overload protection, controllers, OCPDs, disconnects, feeder conductors, feeder OCPD and disconnect to ensure adequate protection and compliance with National Electrical Code standards.
Ws004 motors calculations-240 v dc
This document summarizes the sizing calculations for conductors, overload protection, controllers, and disconnects for three DC motors powered from a single 240V DC feeder. Motor #1 is 10HP with 38A FLC. Motor #2 is 15HP with 55A FLC. Motor #3 is 20HP with 72A FLC. Calculations are shown for branch circuit conductors, overload protection, controllers according to NEC requirements for each motor. Feeder calculations then size conductors to supply all three motors from a common 250A OCPD and 200A disconnect.
Rp ocpd coordination report 07-23-13
This document contains a time-current curve (TCC) analysis for an industrial project with a reference voltage of 480V. It provides details on the circuit breakers, transformers, and cables in the system, including their ratings, settings, and damage/trip curves. The analysis evaluates the fault duty of a bus fault current at the generator circuit breaker CB-GEN2, which is rated for 2000A and has a short-time rating of 65kA.
Ocpd 07-23-13
Overcurrent protection devices like fuses and circuit breakers are required by the NEC to protect electrical conductors and equipment from excessive currents. Fuses and circuit breakers must have voltage and current ratings matching the circuit, as well as interrupting ratings high enough to safely handle short circuits. Special consideration is given to motor, HVAC, and series-rated circuits to prevent nuisance tripping while still providing adequate protection.
Motors & controllers
The document discusses various types of electric motors and motor controllers. It describes squirrel cage induction motors, different types of motor starters including full voltage non-reversing, reduced voltage autotransformer, and variable frequency drives. It also discusses components of variable frequency drives, features of VFDs, inverter rated motors, overload conditions like single phasing and unbalanced voltage, motor protection types, and motor installation requirements.
M#2 60 hp 07-25-13
This document contains technical specifications for circuit breaker CBL-AHU-S1, including its trip current of 200 amps, thermal curve settings, and instantaneous trip setting of 1000 amps. It also lists specifications for a motor overload relay for a 60HP motor protected by this circuit breaker, including its class 20 thermal settings. Ratings are provided for short circuit currents through the circuit breaker in both 3-phase and single-line-to-ground fault configurations.
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
This document provides an electrical one-line diagram for a multi-floor commercial building. It shows the locations and ratings of electrical equipment including utility transformers and meters, switchboards, panelboards, generators, and other components. Electrical equipment is shown on each floor and electrical rooms are labeled. Notes provide information on equipment specifications and installation requirements.
More from Chad Kurdi, P.E. (7)
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
gray level transformation unit 3(image processing))
gray level transformation unit 3(image processing))
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
M#1 50 hp 07-25-13
- 1. CBL-AHU-S2 0.5 1 10 100 1K 10K 100K 0.01 0.10 1 10 100 1000 CURRENT IN AMPERES TIMEINSECONDS CUTLER-HAMMER HKD HKD Trip 125.0 A Settings Phase Thermal Curve (Fixed) INST (5-10 x Trip) 5 (625A) CB-AHU-S2 MOL Class 20 Motor O/L Settings Phase Class 20 OL-50HP CBL-AHU-S2 AHU-S2 (M#1 50HP) CUTLER-HAMMER HKD HKD Trip 125.0 A Settings Phase Thermal Curve (Fixed) INST (5-10 x Trip) 5 (625A) CB-AHU-S2 MOL Class 20 Motor O/L Settings Phase Class 20 OL-50HP CBL-AHU-S2 AHU-S2 (M#1 50HP) CBL-AHU-S2 Isc 3P21219A Isc SLG 12194 A AHU-S2 (M#1 50HP) Isc 3P355A Isc SLG 135 A CB-AHU-S2 OL-50HP VFD-50HP TCC: M#1 50HP Current Scale x 1 Reference Voltage: 480 July 24, 2013