양아치조명디자인 하는 놈때문에 사기당했던 자료들...
디자인 하는 양아치가 반도체 이론을 만든다고?
여러분 공부들 하시고 사기에 당하지 마시길...
사기를 본격적으로 치기시작한 초기버전입니다. 남에 문서를 받아서 앞자만 바꾸고 지가 만들어서 엘지이노텍에 프리젠 한거라나! 그럼 메일로 보내준 내 원본은 어찌 감추나? 글구 양아치 새끼 뭐 능력이 안되니 자료도 제데로 추려서 만들지도 못하고 앞문자만 바'꿔요...
This document describes an LED control microcontroller chip that has the following key features: it can control 3 LEDs using PWM output, contains temperature, illuminance, and general purpose sensors, detects battery level, supports PLC communication standards, includes UART and SPI interfaces, provides calendar/timer functions, has 8 GPIO pins, and can turn an SMPS power supply on and off using an internal LDO regulator.
The document introduces the FIDES-P1 LED lighting product. It uses HVUD (H bridge V Up-Down) technology and I-V control technology to directly drive LEDs from an AC input without using a transformer or electrolytic capacitor. The I-V control technology regulates the LED current to maintain consistent brightness. The product has bypass circuits to allow normal operation if an LED fails. It also has various power control and efficiency features.
This document describes an LED control microcontroller chip that has the following key features: it can control 3 LEDs using PWM output, contains temperature, illuminance, and general purpose sensors, detects battery level, supports PLC communication standards, includes UART and SPI interfaces, provides calendar/timer functions, has 8 GPIO pins, and can turn an SMPS power supply on and off using an internal LDO regulator.
The document introduces the FIDES-P1 LED lighting product. It uses HVUD (H bridge V Up-Down) technology and I-V control technology to directly drive LEDs from an AC input without using a transformer or electrolytic capacitor. The I-V control technology regulates the LED current to maintain consistent brightness. The product has bypass circuits to allow normal operation if an LED fails. It also has various power control and efficiency features.
This document describes an LED control microcontroller that has the following key features: it can control 3 LEDs using PWM output, contains temperature, illuminance, and general purpose sensors, detects battery level, supports PLC communication standards, includes a UART interface, calendar/timer functions, 8 GPIO pins, SPI interface, can turn on/off an SMPS for zero power operation, and has an internal LDO regulator. It also allows for easy manual color control of the LEDs.
This document describes an LED control microcontroller that has the following key features: it can control 3 LEDs using PWM output, contains temperature, illuminance, and general purpose sensors, detects battery level, supports PLC communication standards, includes a UART interface, calendar/timer functions, 8 GPIO pins, SPI interface, can turn on/off an SMPS for zero power operation, and has an internal LDO regulator. It also allows for easy manual color control of the LEDs.
1. Drive for LGINNOTEK
LED NETWORK LIGHTING SYSTEM
SMART CONTROL MODULE (L-SCM)
DEVLOP. PROJECT
엘지이노텍 엘이디 네트워크 조명 시스템을 위한
지능형 컨트롤 모듈 개발 프로젝트
L-SCM
LIGHT_GREEN
2. Drive for LGINNOTEK
LED NETWORK LIGHTING SYSTEM
XMART CONTROL CHIP (XCC)
DEVLOP. PROJECT
엘지이노텍 엘이디 네트워크 조명 시스템을 위한
지능형 컨트롤 모듈 개발 프로젝트
XCC
LIGHT_GREEN
Drive
3. LED CONTROL MCU
• Function
• LED Control PWM out X 3(8Watts each) LED3 채널 컨트롤
• Temperature sensor 온도감시
• luminance sensor 휘도센서
• General Purpose sensor 일반센서
• Batery level Detector 배터리 잔량감지
• PLC Communication(EN50065-1 CENELEC, FCC, ARIB) PLC 모뎀 - 안정성이 떨어
짐
• UART Interface 다목적 비동기 송수신기
• Calender/Timmer
• 8 GPIO (General Purpose Input/Output)
• SPI Interface
• SMPS On/Off(Zero Power)
• Internal LDO (Low Drop Output)
• Easy Manual Colour control