This document provides guidelines for properly placing electrical fixtures such as outlets, lights, switches, and other miscellaneous fixtures in a home. It specifies that each room must have at least one light controlled by a switch, outlets should be placed every 6 feet or less on walls, and bathrooms should have outlets above sinks. Fixture placement plans should show approximate locations of fixtures without including circuit design or loads, using standard symbols and legends.
Light fixtures are electrical devices that produce artificial light for industrial, commercial, or residential use. They connect a light bulb to a power source. Light fixtures come in many types, including indoor and outdoor fixtures, emergency lights, and specialized fixtures for places like vehicles, planes, boats, and hospitals. They are classified based on how they are installed, their light function, or the type of light bulb used. Attributes of light fixtures include their intended application, certifications, type, bulb/lamp type, mounting style, features, and power specifications.
This document provides descriptions and illustrations of various standard electrical symbols used in schematics and diagrams. It includes symbols for outlets, switches, panelboards, lighting fixtures, transformers, feeders, underground wiring, and devices for signaling and data systems. The symbols represent components of electrical distribution systems for residential, commercial, industrial and lighting applications. Variations in the standard symbols are denoted by additional lowercase letters.
Electrical maintenance is important for safety, reliability, and cost savings. It involves regularly inspecting, testing, and repairing electrical equipment to prevent failures, accidents, and costly downtime. An effective preventative electrical maintenance program can reduce hazards, save lives, and minimize unexpected issues by catching small problems before they worsen and cause damage."
This document discusses the use of lights in fishing, known as light fishing. It explains that lights attract fish and other marine organisms at night. Fishermen have taken advantage of this behavior by using lights attached to fishing gear or structures above or below the water to aggregate and catch fish. The document describes different types of lights used, including high-intensity and low-intensity lights, and discusses factors like brightness, color, and portability. It also explains photomovement responses like aggregation, photokinesis, phototaxis, and vertical migration that cause marine life to be drawn to light sources. Regulations around light fishing in the Philippines are also summarized.
This document discusses different types of lighting used in photography, including hard light and soft light. Hard light comes from a small light source and creates sharp shadows, while soft light has a larger source or diffusion material and fills shadows. Common lighting fixtures mentioned are fresnels, ellipsoidals, and scoops. Methods for softening hard light include moving the light closer, using reflectors to bounce light, umbrellas, and placing diffusion materials between the light and subject.
The document discusses different types of paints used for various surfaces. It classifies paints based on factors such as the base used like oil, alkyd, latex, epoxy paints. It also discusses classification based on properties and functions like distempers, emulsion paints, texture paints, cement paints, enamel paints, primers, sealers. The document provides details on composition of different paints and desirable characteristics of good paints like spreading power, durability, ease of application and resistance to weathering. It also lists common defects in paints like bleeding, blistering, cracking and methods to prevent them.
This document provides guidelines for properly placing electrical fixtures such as outlets, lights, switches, and other miscellaneous fixtures in a home. It specifies that each room must have at least one light controlled by a switch, outlets should be placed every 6 feet or less on walls, and bathrooms should have outlets above sinks. Fixture placement plans should show approximate locations of fixtures without including circuit design or loads, using standard symbols and legends.
Light fixtures are electrical devices that produce artificial light for industrial, commercial, or residential use. They connect a light bulb to a power source. Light fixtures come in many types, including indoor and outdoor fixtures, emergency lights, and specialized fixtures for places like vehicles, planes, boats, and hospitals. They are classified based on how they are installed, their light function, or the type of light bulb used. Attributes of light fixtures include their intended application, certifications, type, bulb/lamp type, mounting style, features, and power specifications.
This document provides descriptions and illustrations of various standard electrical symbols used in schematics and diagrams. It includes symbols for outlets, switches, panelboards, lighting fixtures, transformers, feeders, underground wiring, and devices for signaling and data systems. The symbols represent components of electrical distribution systems for residential, commercial, industrial and lighting applications. Variations in the standard symbols are denoted by additional lowercase letters.
Electrical maintenance is important for safety, reliability, and cost savings. It involves regularly inspecting, testing, and repairing electrical equipment to prevent failures, accidents, and costly downtime. An effective preventative electrical maintenance program can reduce hazards, save lives, and minimize unexpected issues by catching small problems before they worsen and cause damage."
This document discusses the use of lights in fishing, known as light fishing. It explains that lights attract fish and other marine organisms at night. Fishermen have taken advantage of this behavior by using lights attached to fishing gear or structures above or below the water to aggregate and catch fish. The document describes different types of lights used, including high-intensity and low-intensity lights, and discusses factors like brightness, color, and portability. It also explains photomovement responses like aggregation, photokinesis, phototaxis, and vertical migration that cause marine life to be drawn to light sources. Regulations around light fishing in the Philippines are also summarized.
This document discusses different types of lighting used in photography, including hard light and soft light. Hard light comes from a small light source and creates sharp shadows, while soft light has a larger source or diffusion material and fills shadows. Common lighting fixtures mentioned are fresnels, ellipsoidals, and scoops. Methods for softening hard light include moving the light closer, using reflectors to bounce light, umbrellas, and placing diffusion materials between the light and subject.
The document discusses different types of paints used for various surfaces. It classifies paints based on factors such as the base used like oil, alkyd, latex, epoxy paints. It also discusses classification based on properties and functions like distempers, emulsion paints, texture paints, cement paints, enamel paints, primers, sealers. The document provides details on composition of different paints and desirable characteristics of good paints like spreading power, durability, ease of application and resistance to weathering. It also lists common defects in paints like bleeding, blistering, cracking and methods to prevent them.
LED light is said to be a safer, healthier light. LEDs do NOT produce any sort of ultraviolet radiation which causes fabric fading, color fading in Art, carpeting and other soft goods.
Session 1 - Using LED in Traditional Sourced Applications. Presented by John...Cindy Foster-Warthen
This document provides an overview of LED lighting applications and design techniques. It discusses indoor, outdoor, and special applications like security lighting. Techniques for lighting spaces like indirect illumination and accent lighting are covered. The document also summarizes the basics of LED lighting like color, efficacy, life, and distribution. It explores lighting trends, challenges, and what the future may hold for continual LED improvements. Examples of lighting designs for offices, outdoor spaces, and artistic installations are presented.
Projector Training - Solid State Light Source TechnologyrAVe [PUBS]
This document provides an overview of solid state light source (SSL) technology for projectors, including different types of SSL systems like LED, laser/phosphor, RGB laser, and hybrid options. It discusses the technology, advantages, suitable markets, and total cost of ownership comparisons for SSL projectors versus lamp-based models. Key advantages of SSL noted are longer life, lower maintenance needs, stable color and brightness over time, tilt and portrait capabilities, and reduced mercury use. Markets identified as good fits include corporate/education, rental/staging, museums, digital signage, theme parks, and control rooms.
The document introduces the Eco-Lens design system for improving LED flashlights. It summarizes three common flashlight designs and their limitations, then demonstrates through examples how Eco-Lens reflector designs can provide brighter and more uniform illumination compared to traditional designs, while allowing for smaller packaging. Specific benefits shown include up to 60% brighter illumination within the same or tighter beam, more tailored spillbeam properties, and the ability to immediately replace existing reflectors for improved performance.
Light as an important architectural element in contemporary architecture..A short dissertation /presentation by..... Atul Pathak ,BIT MESRA..Department of Architecture
Want to learn more about Solar Street Lighting
Navigate how to design a street lighting project from start to finish
Do you have an upcoming street lighting project?
Are you considering using solar as a green alternative?
Then download our guide to street lighting.
This guide includes:
Why implement street lighting
Where to implement street lighting
Why uniformity is important for street lighting
How to implement street lighting
Designing the perfect street lighting system
Benefits of using solar street lighting
This guide will help you make an informed decision on all aspects of street lighting for business, residential and other areas that require adequate lighting for streets, roadways, highways, and other applications.
Learn more online at https://www.sepco-solarlighting.com/solar-street-lighting
This document summarizes a presentation about changes in the lighting industry due to LED technology. It discusses how LEDs have changed color metrics and allowed for customizable white light. It also notes that LEDs have increased lighting design options and controls capabilities. The document provides examples of LED lighting designs for residential, retail, and commercial spaces. It emphasizes that LEDs have changed the lighting business model and require reconstructing approaches to lighting design and specification.
The document discusses lighting design consultation services. It notes that lighting design focuses on putting people's needs at the center by using light to enhance architectural spaces. A true lighting design can create new experiences through light. It then outlines the company's process, which includes understanding user needs, concept development, mockups, coordination, documentation, and implementation. Key aspects of their services include needs-based design, converting designs to reality through engineering, and achieving quality illumination.
Integrating Interior Design, Lighting Design and Electrical EngineeringAnna Martinovich
A presentation that goes over:
- the role of Interior Designer and Lighting Designer/Engineer
- the general lighting information and typical coordination process
- what goes on behind the scenes
- fixture placement and selection
- other electrical coordination with Interior Designer
Sonu Kumar is seeking a challenging role applying his technical and functional skills. He has over 5 years of experience in roles related to solar power projects, LED lighting design and development, and technical training. Some of his responsibilities have included solar power system design, installation and commissioning, quality control, and project management. He holds a B.Tech in ECE and has experience with programming languages like C and C++.
Many local authorities have started or are considering large scale replacement programmes to convert their street lighting to LED lighting.
This process is fraught with potential pitfalls! How do you ensure that the Specification is future proof and fit for purpose...
Talk by Alistair Scott BSc CEng FILP MIMechE, Managing Director, Designs for Lighting Ltd
The attached narrated power point presentation explains the methods for establishing functions in design process. The material will be useful for KTU second year B Tech students in Electronics and Communication Engineering who prepare for the subject EST 200, Design and Engineering.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate this.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate this.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate....
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate ...
Residential Applications for LED Lighting: How LED lighting is creating opportunities for creating dynamic lighting layering in residential spaces
LEARNING OUTCOMES
To better understand the key benefits of using LED lighting in residential applications.
To better understand how LED technology is positively impacting lighting design objectives when using lighting layers.
To better understand the specific benefits of LED lighting in kitchen and baths.
To better understand the primary specification issues that designers and architects must define when selecting and applying LED decorative and architectural lighting in residential applications.
To analyze specific case studies of successful LED lighting application.
This session is proudly sponsored by Residential Lighting
Presented by: Joseph A. Rey-Barreau, AIA, IES, i
The document compares TCP's vertically integrated approach to LED product design and manufacturing against LED chip makers and startup companies. TCP controls all aspects of the process, from chip selection, product design, manufacturing, quality control, and distribution. This vertical integration allows TCP to quickly adapt to market changes, supply high quality, best performing products at the lowest cost, and ensure customer satisfaction.
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
LED light is said to be a safer, healthier light. LEDs do NOT produce any sort of ultraviolet radiation which causes fabric fading, color fading in Art, carpeting and other soft goods.
Session 1 - Using LED in Traditional Sourced Applications. Presented by John...Cindy Foster-Warthen
This document provides an overview of LED lighting applications and design techniques. It discusses indoor, outdoor, and special applications like security lighting. Techniques for lighting spaces like indirect illumination and accent lighting are covered. The document also summarizes the basics of LED lighting like color, efficacy, life, and distribution. It explores lighting trends, challenges, and what the future may hold for continual LED improvements. Examples of lighting designs for offices, outdoor spaces, and artistic installations are presented.
Projector Training - Solid State Light Source TechnologyrAVe [PUBS]
This document provides an overview of solid state light source (SSL) technology for projectors, including different types of SSL systems like LED, laser/phosphor, RGB laser, and hybrid options. It discusses the technology, advantages, suitable markets, and total cost of ownership comparisons for SSL projectors versus lamp-based models. Key advantages of SSL noted are longer life, lower maintenance needs, stable color and brightness over time, tilt and portrait capabilities, and reduced mercury use. Markets identified as good fits include corporate/education, rental/staging, museums, digital signage, theme parks, and control rooms.
The document introduces the Eco-Lens design system for improving LED flashlights. It summarizes three common flashlight designs and their limitations, then demonstrates through examples how Eco-Lens reflector designs can provide brighter and more uniform illumination compared to traditional designs, while allowing for smaller packaging. Specific benefits shown include up to 60% brighter illumination within the same or tighter beam, more tailored spillbeam properties, and the ability to immediately replace existing reflectors for improved performance.
Light as an important architectural element in contemporary architecture..A short dissertation /presentation by..... Atul Pathak ,BIT MESRA..Department of Architecture
Want to learn more about Solar Street Lighting
Navigate how to design a street lighting project from start to finish
Do you have an upcoming street lighting project?
Are you considering using solar as a green alternative?
Then download our guide to street lighting.
This guide includes:
Why implement street lighting
Where to implement street lighting
Why uniformity is important for street lighting
How to implement street lighting
Designing the perfect street lighting system
Benefits of using solar street lighting
This guide will help you make an informed decision on all aspects of street lighting for business, residential and other areas that require adequate lighting for streets, roadways, highways, and other applications.
Learn more online at https://www.sepco-solarlighting.com/solar-street-lighting
This document summarizes a presentation about changes in the lighting industry due to LED technology. It discusses how LEDs have changed color metrics and allowed for customizable white light. It also notes that LEDs have increased lighting design options and controls capabilities. The document provides examples of LED lighting designs for residential, retail, and commercial spaces. It emphasizes that LEDs have changed the lighting business model and require reconstructing approaches to lighting design and specification.
The document discusses lighting design consultation services. It notes that lighting design focuses on putting people's needs at the center by using light to enhance architectural spaces. A true lighting design can create new experiences through light. It then outlines the company's process, which includes understanding user needs, concept development, mockups, coordination, documentation, and implementation. Key aspects of their services include needs-based design, converting designs to reality through engineering, and achieving quality illumination.
Integrating Interior Design, Lighting Design and Electrical EngineeringAnna Martinovich
A presentation that goes over:
- the role of Interior Designer and Lighting Designer/Engineer
- the general lighting information and typical coordination process
- what goes on behind the scenes
- fixture placement and selection
- other electrical coordination with Interior Designer
Sonu Kumar is seeking a challenging role applying his technical and functional skills. He has over 5 years of experience in roles related to solar power projects, LED lighting design and development, and technical training. Some of his responsibilities have included solar power system design, installation and commissioning, quality control, and project management. He holds a B.Tech in ECE and has experience with programming languages like C and C++.
Many local authorities have started or are considering large scale replacement programmes to convert their street lighting to LED lighting.
This process is fraught with potential pitfalls! How do you ensure that the Specification is future proof and fit for purpose...
Talk by Alistair Scott BSc CEng FILP MIMechE, Managing Director, Designs for Lighting Ltd
The attached narrated power point presentation explains the methods for establishing functions in design process. The material will be useful for KTU second year B Tech students in Electronics and Communication Engineering who prepare for the subject EST 200, Design and Engineering.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate this.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate this.
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate....
This brochure is designed to communicate what it would be like to work with us; the type of projects to which we add value and what tools we use to facilitate ...
Residential Applications for LED Lighting: How LED lighting is creating opportunities for creating dynamic lighting layering in residential spaces
LEARNING OUTCOMES
To better understand the key benefits of using LED lighting in residential applications.
To better understand how LED technology is positively impacting lighting design objectives when using lighting layers.
To better understand the specific benefits of LED lighting in kitchen and baths.
To better understand the primary specification issues that designers and architects must define when selecting and applying LED decorative and architectural lighting in residential applications.
To analyze specific case studies of successful LED lighting application.
This session is proudly sponsored by Residential Lighting
Presented by: Joseph A. Rey-Barreau, AIA, IES, i
The document compares TCP's vertically integrated approach to LED product design and manufacturing against LED chip makers and startup companies. TCP controls all aspects of the process, from chip selection, product design, manufacturing, quality control, and distribution. This vertical integration allows TCP to quickly adapt to market changes, supply high quality, best performing products at the lowest cost, and ensure customer satisfaction.
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
1. ARCHITECTURAL ENGINEERING DESIGN GROUP, INC.
1900 Wazee Street | Suite 350 | Denver, Colorado 80202 | 303.296.3034 voice | www.aedesign-inc.com
LED Lighting
2. About AE Design
• Started in 2004 by Jon Brooks and Jeff Mullikin
• Fundamental belief in Sustainable Design
• Specialize in Lighting Design and
Electrical Engineering
• About process as well as results
• 17 team members
• Offices located in Denver and Chicago
3. Jeff Mullikin, PE, LEED AP BD+C – Principal
Anna-Lisa Conners, LC – Designer
Objectives of Today’s Discussion:
• Understanding the history and evolution
of lighting
• Some crucial technical aspects of light
• Why LEDs?
• How do I know when to use LEDs?
• Challenges and drawbacks
• Lighting Applications
•What we do
• What is in store for our future?
10. LED Applications – Exterior
Parking Lots and Area Illumination:
• Better lamp efficacy and better light distribution from a
directional source creates higher fixture efficiencies
• Reduce fixture quantity and therefore cost
• Utility Rebates
• Replamping and maintenance costs
•Unique fixture shapes
BEGA-US
12. Lighting to set an Environment
Mysterious Warm & Cozy
Vintage / Eclectic Bright
13. Case Study – Mushrif Central Park
Mushrif Central Park
Shade House
14. Case Study – Mushrif Central Park
The Architect Sets the Scene
The Architect wanted to create a Beacon would be visible at night.
The main function at night will be a viewing platform that is visible from any other point in the park.
The white tube design was intentionally a “blank canvas.”
15. Case Study – Mushrif Central Park
Lighting Designer Communicates Ideas
We compile concept imagery that displays the overall lighting effects.
16. Case Study – Mushrif Central Park
Lighting Designer Communicates Ideas
We present (2) options – Illumination from the from and from the back.
17. Case Study – Mushrif Central Park
Figuring Out the Details
We figure out the placement of fixtures.
18. Fixture Selection –
Mushrif Central Park
Typical Items During
Fixture Selection
Lumen Output
Beam Spread (Typically Multiple Options)
Static White – CCT
Colored Light – Available Channels of Color
CRI (Color Rendering Index)
Wattage (Efficacy)
Voltage
Dimming Ability
Integral Power Supply or Remote
Warranty
19. Fixture Selection –
Mushrif Central Park
Typical Items During
Fixture Selection
Lumen Output
Beam Spread (Typically Multiple Options)
Static White – CCT
Colored Light – Available Channels of Color
CRI (Color Rendering Index)
Wattage (Efficacy)
Voltage
Dimming Ability
Integral Power Supply or Remote
Warranty
Static White
Colored Light
Static White
21. OLEDs
• Lightweight and flexible
• Improved brightness
• Better power efficiency and thickness
• Short Lifespan
• Poor color balance
• Easily damaged with water
• Poor readability outdoors
• High power consumption with white light
22. The Future of LEDs
Industry Drivers:
• Energy Codes
• Building Automation
• Energy Consumption Awareness
• How do I know when to use LEDs?
• Challenges and drawbacks
• What is in store for our future?