The document provides instructions for removing and installing various engine components on an excavator, including:
- The starter motor
- The alternator
- The fuel pump group
- The injection nozzles
- The cylinder head
Detailed steps are provided for each procedure, including the order of removal and installation, any disconnections required, and specified tightening torques. Safety precautions are outlined at the beginning and throughout.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upifkskjdksmem
The document provides instructions for removing a starter motor from an excavator. It begins by disconnecting the negative terminal of the battery. Then it lists the following steps: 1) Remove the cabin, 2) Move the operator's cab forward completely, 3) Loosen bolts and remove a cover, 4) Disconnect electrical connections to the starter motor, 5) Loosen mounting bolts and remove the starter motor. Safety precautions are emphasized throughout.
Komatsu pc20 r 8 hydraulic excavator service repair manual sn 10001 and upfjsjekkdmnem
This document is a shop manual for Komatsu PC20R, PC25R, and PC27R-8 excavators. It contains safety precautions and outlines the manual's organization. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. It provides technical information and instructions to aid technicians in performing repairs and maintenance on these excavator models.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)GingerHines
This document provides important safety instructions for repairing and servicing machines. It emphasizes that proper repair techniques described in the manual are safe methods. Some operations require specially designed tools from Komatsu. Symbols are used to mark safety precautions that should always be followed carefully. The document outlines general precautions like wearing protective equipment, preparing the work area safely, using lifting equipment properly, and taking safety measures for different repair operations.
Komatsu pc12 r 8 hydraulic excavator service repair manual snf30001 and upfjsjekkdmnem
The document provides instructions for removing and installing various engine components on an excavator, including the starter motor, alternator, fuel pump group, injection nozzles, and cylinder head. Safety precautions are outlined, and the steps for each removal and installation procedure are provided, along with the appropriate torque specifications.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjsjekkdmnem
- The document provides instructions for removing and installing various engine components, including the starter motor, alternator, injection pump, injection nozzles, and cylinder head.
- The procedures note important steps like disconnecting the battery and draining coolant before removal. Precautions are provided for items under pressure.
- Reinstallation is the reverse of removal, noting proper torque specifications and checks like fuel injection timing adjustment.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
Komatsu ck30 1 skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This 3-page shop manual section provides information on servicing and repairing the Komatsu CK30-1 compact track loader. It includes an overview of the manual's contents and structure, safety precautions for working on the equipment, and guidance for how to read and update the manual. The document outlines the main components that will be covered, testing and adjustment procedures, removal and installation instructions, maintenance standards, and other information needed for repair work. Special symbols are used to mark important safety guidelines and quality points.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upifkskjdksmem
The document provides instructions for removing a starter motor from an excavator. It begins by disconnecting the negative terminal of the battery. Then it lists the following steps: 1) Remove the cabin, 2) Move the operator's cab forward completely, 3) Loosen bolts and remove a cover, 4) Disconnect electrical connections to the starter motor, 5) Loosen mounting bolts and remove the starter motor. Safety precautions are emphasized throughout.
Komatsu pc20 r 8 hydraulic excavator service repair manual sn 10001 and upfjsjekkdmnem
This document is a shop manual for Komatsu PC20R, PC25R, and PC27R-8 excavators. It contains safety precautions and outlines the manual's organization. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. It provides technical information and instructions to aid technicians in performing repairs and maintenance on these excavator models.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)GingerHines
This document provides important safety instructions for repairing and servicing machines. It emphasizes that proper repair techniques described in the manual are safe methods. Some operations require specially designed tools from Komatsu. Symbols are used to mark safety precautions that should always be followed carefully. The document outlines general precautions like wearing protective equipment, preparing the work area safely, using lifting equipment properly, and taking safety measures for different repair operations.
Komatsu pc12 r 8 hydraulic excavator service repair manual snf30001 and upfjsjekkdmnem
The document provides instructions for removing and installing various engine components on an excavator, including the starter motor, alternator, fuel pump group, injection nozzles, and cylinder head. Safety precautions are outlined, and the steps for each removal and installation procedure are provided, along with the appropriate torque specifications.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjsjekkdmnem
- The document provides instructions for removing and installing various engine components, including the starter motor, alternator, injection pump, injection nozzles, and cylinder head.
- The procedures note important steps like disconnecting the battery and draining coolant before removal. Precautions are provided for items under pressure.
- Reinstallation is the reverse of removal, noting proper torque specifications and checks like fuel injection timing adjustment.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
Komatsu ck30 1 skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This 3-page shop manual section provides information on servicing and repairing the Komatsu CK30-1 compact track loader. It includes an overview of the manual's contents and structure, safety precautions for working on the equipment, and guidance for how to read and update the manual. The document outlines the main components that will be covered, testing and adjustment procedures, removal and installation instructions, maintenance standards, and other information needed for repair work. Special symbols are used to mark important safety guidelines and quality points.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200001 and u...jjkdmsmmd
The document provides guidance on safety precautions for maintenance work. It outlines general precautions like wearing protective equipment and blocking equipment before starting work. It describes preparations for work like lowering equipment, supporting the machine, and cleaning work areas. Precautions during work are also covered, such as releasing pressure slowly and waiting for components to cool. Standard tightening torques and hoisting instructions are included as well.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upifkskjdksmem
The document provides instructions for removing and installing various components on an excavator, including the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Safety precautions are outlined and each removal and installation procedure is described in step-by-step detail, with accompanying diagrams labeling the relevant parts. Tightening specifications and other technical details are provided.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes steps for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes procedures for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200243 and u...jjkdmsmmd
The document provides guidance on safety precautions, hoisting instructions, and standard tightening torques for maintenance and repair work. It outlines general safety practices like wearing protective equipment, blocking equipment, and draining fluids before working. It also covers hoisting heavy parts safely using wire ropes of adequate diameter and slinging loads from the middle of hooks. Standard tightening torques are provided for bolts, nuts, and flared fittings to ensure correct assembly.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0210001 and u...jjkdmsmmd
This document provides safety information and instructions for properly servicing and repairing Komatsu Utility machines. It outlines general safety precautions that should be followed, including wearing proper protective equipment and blocking the machine before starting work. The document also provides instructions on hoisting heavy components, tightening torques for bolts and nuts, and how to read the shop manual, which is divided into sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu pw95 r 2 hydraulic excavator service repair manual sn21d0220001 and upfhjsjkdmemm
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical systems require special precautions when servicing.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0220001 and up...fujskekdjdmkm3e
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical sources should be disconnected as well.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0210001 and up...fujskekdjdmkm3e
This document provides safety instructions and guidelines for servicing and repairing Komatsu equipment. It emphasizes taking necessary safety precautions when working, such as wearing proper protective equipment. The document outlines general safety practices like blocking equipment, relieving hydraulic pressures, and using lifting equipment properly. It also provides instructions on how to read the shop manual, including its organization, symbols used, and hoisting parts.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dikskkdmmdd
This document provides important safety instructions for repairing machines. It emphasizes that proper service and repair techniques are effective and safe. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing protective equipment, agreeing on operating procedures with other workers, keeping work areas clean and organized, and preparing machines safely for work by lowering or securing equipment.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)fjskekmdm
This document provides important safety instructions for servicing and repairing machinery:
1. Proper service and repair using the recommended techniques from the manufacturer's manual is important for safe machine operation. Special tools may be required for some operations.
2. Safety symbols are used throughout the manual to mark important safety precautions that should always be followed carefully. Safety should be the top priority, especially in dangerous situations.
3. Precautions are outlined for operations involving tools, welding, working with others, keeping work areas clean and organized, preparing machines for work, and working on pressurized components and hot fluids. Proper lifting of heavy components using hoists or cranes is also covered.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dfjjsjkemmm
This document provides important safety instructions for servicing and repairing machines. It emphasizes that proper service and repair techniques described in the manual are effective and safe methods. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing proper protective equipment, agreeing on operating procedures with other workers, and keeping the work area clean and organized. It also provides preparations for work, such as parking the machine securely, lowering equipment, and removing mud and oil from access areas.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing machinery. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is also given for removing a starter motor from machinery.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f22262 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing equipment. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is given for removing a starter motor from an engine.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualjfdjskmdmme
This document provides information on the structure, testing, removal/installation, and maintenance of components. It contains sections on structure and function, testing and adjusting, removal and installation, and maintenance standards. The document emphasizes safety precautions, such as wearing protective equipment, blocking parts from movement, and releasing pressures slowly. It provides instructions on how to read the manual, including page numbering, added pages, revisions, and symbols used to mark important information.
Mercury mercruiser gasoline engines 5.0 l mpi alpha and bravo service repair ...ifkskjdksmem
This document is a service manual that provides instructions and specifications for maintaining Mercury Marine 5.0L, 5.7L, and 6.2L MPI gasoline engines. It contains sections on general information, maintenance procedures, engine systems, electrical systems, fuel systems, cooling systems, exhaust systems, drives, and power steering. The manual provides details on routine maintenance tasks like checking fluid levels and changing fluids, as well as scheduled maintenance intervals and specifications. Safety notices are included throughout to warn technicians of hazardous conditions.
Mercruiser sterndrive mc alpha one alpha one ss service repair manual sn0a471...ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt units
- Guidelines for decal application and removal
- Procedures for cleaning and painting aluminum propellers and gear housings
Mercruiser sterndrive mc 898 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt sterndrive units
- Guidelines for applying decals, removing paint, and repainting aluminum propellers and gear housings
Mercruiser sterndrive mc 488 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 260 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 260 mr service repair manual sn6849290 to 0a471374ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 230 mr service repair manual sn6849290 to 0a471374ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt units
- Guidelines for decal application and removal
- Procedures for cleaning and painting aluminum propellers and gear housings
More Related Content
Similar to Komatsu pc15 r 8 hydraulic excavator service repair manual sn f20001 and up
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200001 and u...jjkdmsmmd
The document provides guidance on safety precautions for maintenance work. It outlines general precautions like wearing protective equipment and blocking equipment before starting work. It describes preparations for work like lowering equipment, supporting the machine, and cleaning work areas. Precautions during work are also covered, such as releasing pressure slowly and waiting for components to cool. Standard tightening torques and hoisting instructions are included as well.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upifkskjdksmem
The document provides instructions for removing and installing various components on an excavator, including the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Safety precautions are outlined and each removal and installation procedure is described in step-by-step detail, with accompanying diagrams labeling the relevant parts. Tightening specifications and other technical details are provided.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes steps for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes procedures for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200243 and u...jjkdmsmmd
The document provides guidance on safety precautions, hoisting instructions, and standard tightening torques for maintenance and repair work. It outlines general safety practices like wearing protective equipment, blocking equipment, and draining fluids before working. It also covers hoisting heavy parts safely using wire ropes of adequate diameter and slinging loads from the middle of hooks. Standard tightening torques are provided for bolts, nuts, and flared fittings to ensure correct assembly.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0210001 and u...jjkdmsmmd
This document provides safety information and instructions for properly servicing and repairing Komatsu Utility machines. It outlines general safety precautions that should be followed, including wearing proper protective equipment and blocking the machine before starting work. The document also provides instructions on hoisting heavy components, tightening torques for bolts and nuts, and how to read the shop manual, which is divided into sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu pw95 r 2 hydraulic excavator service repair manual sn21d0220001 and upfhjsjkdmemm
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical systems require special precautions when servicing.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0220001 and up...fujskekdjdmkm3e
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical sources should be disconnected as well.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0210001 and up...fujskekdjdmkm3e
This document provides safety instructions and guidelines for servicing and repairing Komatsu equipment. It emphasizes taking necessary safety precautions when working, such as wearing proper protective equipment. The document outlines general safety practices like blocking equipment, relieving hydraulic pressures, and using lifting equipment properly. It also provides instructions on how to read the shop manual, including its organization, symbols used, and hoisting parts.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dikskkdmmdd
This document provides important safety instructions for repairing machines. It emphasizes that proper service and repair techniques are effective and safe. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing protective equipment, agreeing on operating procedures with other workers, keeping work areas clean and organized, and preparing machines safely for work by lowering or securing equipment.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)fjskekmdm
This document provides important safety instructions for servicing and repairing machinery:
1. Proper service and repair using the recommended techniques from the manufacturer's manual is important for safe machine operation. Special tools may be required for some operations.
2. Safety symbols are used throughout the manual to mark important safety precautions that should always be followed carefully. Safety should be the top priority, especially in dangerous situations.
3. Precautions are outlined for operations involving tools, welding, working with others, keeping work areas clean and organized, preparing machines for work, and working on pressurized components and hot fluids. Proper lifting of heavy components using hoists or cranes is also covered.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dfjjsjkemmm
This document provides important safety instructions for servicing and repairing machines. It emphasizes that proper service and repair techniques described in the manual are effective and safe methods. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing proper protective equipment, agreeing on operating procedures with other workers, and keeping the work area clean and organized. It also provides preparations for work, such as parking the machine securely, lowering equipment, and removing mud and oil from access areas.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing machinery. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is also given for removing a starter motor from machinery.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f22262 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing equipment. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is given for removing a starter motor from an engine.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualjfdjskmdmme
This document provides information on the structure, testing, removal/installation, and maintenance of components. It contains sections on structure and function, testing and adjusting, removal and installation, and maintenance standards. The document emphasizes safety precautions, such as wearing protective equipment, blocking parts from movement, and releasing pressures slowly. It provides instructions on how to read the manual, including page numbering, added pages, revisions, and symbols used to mark important information.
Similar to Komatsu pc15 r 8 hydraulic excavator service repair manual sn f20001 and up (15)
Mercury mercruiser gasoline engines 5.0 l mpi alpha and bravo service repair ...ifkskjdksmem
This document is a service manual that provides instructions and specifications for maintaining Mercury Marine 5.0L, 5.7L, and 6.2L MPI gasoline engines. It contains sections on general information, maintenance procedures, engine systems, electrical systems, fuel systems, cooling systems, exhaust systems, drives, and power steering. The manual provides details on routine maintenance tasks like checking fluid levels and changing fluids, as well as scheduled maintenance intervals and specifications. Safety notices are included throughout to warn technicians of hazardous conditions.
Mercruiser sterndrive mc alpha one alpha one ss service repair manual sn0a471...ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt units
- Guidelines for decal application and removal
- Procedures for cleaning and painting aluminum propellers and gear housings
Mercruiser sterndrive mc 898 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt sterndrive units
- Guidelines for applying decals, removing paint, and repainting aluminum propellers and gear housings
Mercruiser sterndrive mc 488 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 260 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 260 mr service repair manual sn6849290 to 0a471374ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Mercruiser sterndrive mc 230 mr service repair manual sn6849290 to 0a471374ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt units
- Guidelines for decal application and removal
- Procedures for cleaning and painting aluminum propellers and gear housings
Mercruiser sterndrive mc 228 r service repair manual sn6216687 to 6849289ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on units
- Proper break-in procedures for new or rebuilt sterndrive units
- Guidelines for applying decals, removing paint, and repainting aluminum propellers and gear housings
Mercruiser sterndrive mc 200 mr service repair manual sn6849290 to 0a471374ifkskjdksmem
This document provides information on Mercury Marine sterndrive units and transom assemblies, including:
- Models and serial number ranges covered
- Original gear ratios and ratios if serviced with different gears
- Serial number locations on drive units and transom assemblies
- Proper break-in procedures for new or rebuilt drive units
- Guidelines for decal application and removal, painting procedures, and corrosion protection
Jcb tm320 tier3 telescopic wheeled loader service repair manualifkskjdksmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 wm tier3 telescopic wheeled loader service repair manualifkskjdksmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the type of fastener and not mix zinc and Dacromet components.
Jcb tm310 s tier3 telescopic wheeled loader service repair manualifkskjdksmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying machines using identification and component plates, which contain serial numbers. It also details typical product identification numbers and vehicle identification numbers. The document outlines torque settings for zinc plated, yellow plated, and Dacromet fasteners under lubricated and unlubricated conditions. Tables with torque settings are provided for UNF and metric grade fasteners.
Jcb tm310 tier3 telescopic wheeled loader service repair manualifkskjdksmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the type of fastener and not mix zinc and Dacromet components.
Jcb sd70 pt axles service repair manualifkskjdksmem
This document is the service manual for JCB Drivetrain Systems Ltd's SD 70/PT axles. It provides general information, safety guidelines, routine maintenance procedures, and technical specifications. The manual is organized into sections covering hydraulics, axles, brakes, and other components. It aims to guide service engineers through maintenance, repair, and overhaul of axle systems and includes part numbers, torque specifications, and a list of recommended service tools. Replacement parts should match original specifications and all seals and gaskets must be renewed during reassembly.
Jcb sd55 3 piece axles service repair manualifkskjdksmem
This service manual provides information on routine maintenance, repairs, and safety procedures for JCB drivetrain systems. It contains sections on general information, care and safety, maintenance, hydraulics, axles, and brakes. The care and safety section emphasizes that safety must come first and outlines important warnings and cautions for workshop procedures. It notes safety notices in the manual use signal words like DANGER, WARNING, and CAUTION to indicate hazard levels and stresses following proper safety procedures when maintaining or repairing hydraulic equipment.
This manual provides information on routine maintenance and repair of JCB drivetrain axles. It details procedures for identifying axles by their serial plate numbers and build identifications. The document instructs technicians to use only genuine replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly. Technicians are advised to follow the manual's guidelines carefully to avoid failures from incorrect assembly.
This service manual provides information on routine maintenance and repairs for JCB drivetrain systems axles. It details procedures for identifying axles by their serial plate numbers and build identifications. The manual instructs technicians to use correct replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly.
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1789429 t...ifkskjdksmem
This document contains safety notices and warnings for operating heavy machinery. It lists general safety practices such as wearing proper protective equipment, not operating under the influence of drugs or alcohol, and being aware of hazards in the work area. It also provides warnings specific to machine operation, such as not exceeding design limits, avoiding sparks in hazardous atmospheres, and keeping hands and feet inside the vehicle while it is moving. The document emphasizes that following all safety practices is necessary to safely operate machinery and protect oneself and others from potential injury or death.
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1390000 t...ifkskjdksmem
This document contains a safety checklist for operating heavy machinery. It lists many potential hazards and provides warnings about how to avoid injuries. Operators are instructed to always be careful and alert, wear proper protective clothing, avoid distractions, inspect work sites for hazards, communicate clearly with others, and never operate faulty or modified equipment. Specific dangers highlighted include being struck by moving parts, electrocution from power lines, explosions in hazardous atmospheres, and falls from unsecured work platforms. The checklist emphasizes practicing new tasks safely and following all applicable regulations and manuals.
Jcb js290 tier iii auto tracked excavator service repair manual sn 01421200...ifkskjdksmem
This document provides torque settings for fasteners used on JCB machines. It discusses zinc plated, Dacromet plated, and yellow plated fasteners. Dacromet fasteners have a silver mottled appearance and lower torque settings than zinc or yellow plated fasteners. Tables with torque values in Nm are provided for UNF and metric fasteners under lubricated and unlubricated conditions. The document instructs only using the specified plated fastener types together and not to mix with incompatible types.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
3. GENERAL PRECAUTIONS
Mistakes in operation extremely dangerous.
Read all the Operation and Maintenance Manual care-
fully BEFORE operating the machine.
1. Before carrying out any greasing or repairs, read
all the precautions written on the decals which
are suck on the machine.
2. When carrying out any operation, always wear
safety shoes and helmet. Do not wear loose work
clothes, or clothes with buttons missing.
. Always wear safety glasses when hitting parts
with a hammer.
. Always wear safety glasses when grinding
parts with a grinder, etc.
3. If welding repairs are needed, always have a
trained, experienced welder carry out the work.
When carrying out welding work, always wear
welding gloves, apron, glasses, cap and other
clothes suited for welding work.
4. When carrying out any operation with two or more
workers, always agree on the operating procedure
before starting. Always inform your fellow workers
before starting any step of the operation. Before
starting work, hang UNDER REPAIR signs on
the controls in the operator's compartment.
5. Keep all tools in good condition and learn the cor-
rect way to use them.
6. Decide a place in the repair workshop to keep
tools and removed parts. Always keep the tools
and parts in their correct places. Always keep
the work area clean and make sure that there is
no dirt or oil on the floor.
Smoke only in the areas provided for smoking.
Never smoke while working.
PREPARATIONS FOR WORK
7. Before adding or making any repairs, park the ma-
chine on hard, level ground, and block the tracks
to prevent the machine from moving.
8. Before starting work, lower blade, bucket or any
other work equipment to the ground. If this is
not possible, use blocks to prevent the work
equipment from falling down. In addition, be sure
to lock all the control levers and hang warning
sign on them.
9. When disassembling or assembling, support the
machine with blocks, jacks or stands before start-
ing work.
10. Remove all mud and oil from the steps or other
places used to get on and off the machine. Always
use the handrails, ladders or steps when getting
on or off the machine.
Never jump on or off the machine.
If it is impossible to use the handrails, ladders or
steps, use a stand to provide safe footing.
PRECAUTIONS DURING WORK
11. When removing the oil filler cap, drain plug or hy-
draulic pressure measuring plugs, loosen them
slowly to prevent the oil from spurting out.
Before disconnecting or removing components of
the hydraulic circuit and engine cooling circuit,
first remove the pressure completely from the cir-
cuit.
12. The water and oil in the circuits are not hot when
the engine in stopped, so be careful not to get
burned.
Wait for the oil water to cool before carrying out
any work on the cooling water circuits.
00-3PC12R, 15R-8
IMPORTANT SAFETY NOTICE
Proper service and repair is extremely important for the safe operation of your machine.
The service and repair techniques recommended by FKI and describe in this manual are both effective
and safe methods of operation. Some of these operations require the use of tools specially designed by
FKI for the purpose.
To prevent injury to workers, the symbols and are used to mark safety precautions in this man-
ual. The cautions accompanying these symbols should always be carefully followed. If any danger arises
or may possibly arise, first consider safety, and take necessary steps to face.
SAFETY
4. 13. Before starting work, remove the leads from the
battery. Always remove the lead from the negative
( ± ) terminal first.
14. When raising heavy components, use a hoist or
crane. Check that the wire rope, chains and hooks
are free from damage.
Always use lifting equipment which has ample ca-
pacity. Install the lifting equipment at the correct
places.
Use a hoist or crane and operate slowly to prevent
the component from hitting any other part.
Do not work with any part still raised by the hoist
or crane.
15. When removing covers which are under internal
pressure or under pressure from a spring, always
leave two bolts in position on opposite sides.
Slowly release the pressure, then slowly loosen
the bolts to remove.
16. When removing components, be careful not to
break or damage the wiring.
Damage wiring may cause electrical fires.
17. When removing piping, stop the fuel or oil from
spilling out. If any fuel or oil drips on to the floor,
wipe it up immediately.
Fuel or oil on the floor can cause you to slip, or
can even start fires.
18. As a general rule, do not use gasoline to wash
parts. In particular, use only the minimum of gaso-
line when washing electrical parts.
19. Be sure to assemble all parts again in their origi-
nal places. Replace any damage parts with new
parts.
When installing hoses and wires, be sure that
they will not be damaged by conctat with other
parts when the machine is being operated.
20. When installing high pressure hoses, make sure
that they are not twisted. Damaged tubes are dan-
gerous, so be extremely careful when installing
tubes for high pressure circuits. Also, check that
connecting parts are correctly tightened.
21. When assembling or installing parts, always use
specified tightening torques.
When installing the parts which vibrate violently or
rotate at high speed, be particulary careful to
check that they are correctly installed.
22. When aligning two holes, never insert your fingers
or hand.
23. When measuring hydraulic pressure, check that
the measuring tool is correctly assembled before
taking any measurement.
24. Take sure when removing or installing tracks.
When removing the track, the track separates
suddenly, so never let anyone stand at either
end of the track.
00-4 PC12R,15R-8
5. 00-5PC12R, 15R-8
FOREWORD
This shop manual has been prepared as an aid to improve the quality of repairs by giving the operator an ac-
curate understanding of the product and by showing him the correct way to perform repairs and make judgements.
Make sure you understand the contents of this manual and use it to full effect at every opportunity.
This shop manual mainly contains the necessary technical information for operations performed in a service
workshop.
The manual is divided into chapters on each main group of components; these chapters are further divided into
the following sections.
STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give an under-
standing of the structure, but also serves as reference material for troubleshooting.
TESTING AND ADJUSTING
This sections explains checks to be made before and after performing repairs, as well as adjustments to be
made at completion of the checks and repairs.
Troubleshooting charts correlating «Problems» to «Causes» are also included in this section.
DISASSEMBLY AND ASSEMBLY
This section explains the order to be followed when removing, installing, disassembling or assembling
each component, as well as precautions to be taken for these operations.
MAINTENANCE STANDARD
This section gives the judgement standards when inspecting disassembled parts.
NOTICE
The specifications contained in this shop manual are subject to change at any time and without any
notice.
Contact your FKI distributor for the latest information.
6. VOLUMES
Shop manual are issued as a guide to carry out re-
pairs. These various volumes are designed to avoid
duplicating the same information.
DISTRIBUTION AND UPDATING
Any additions, amendments or other changes will
be sent to FKI distributors.
Get the most up-to-date information before you start
any work.
FILING METHOD
1. See the page number on the bottom of the page.
File the pages in correct order.
2. Following examples show you how to read the
page number.
Example
3. Additional pages: additional pages are indicated
by a hyphen (-) and number after the page num-
ber.
Fle as in the example.
Example:
10-4
10-4-1
10-4-2
10-5
] Added pages
REVISED EDITION MARK
(1 2 3 ....)
When a manual is revised, an edition mark is re-
corded on the bottom outside corner of the pages.
REVISIONS
Revised pages are shown on the LIST OF RE-
VISED PAGES between the title page and SAFETY
page.
SYMBOLS
In order to make the shop manual greatly chelpful,
important points about safety and quality are marked
with the following symbols.
Symbol Item Remarks
Safety
Special safety precautions are ne-
cessary when performing the
work.
Extra special safety precautions
are necessary when performing
the work because it is under inter-
nal pressure.
Caution
Special technical precautions or
other precautions for preserving
standards are necessary when
performing the work.
Weight
Weight of parts or systems.
Caution necessary when selecting
hoisting wire, or when working
posture is important, etc.
Tightening
torque
Parts that require special attention
for the tightening torque during as-
sembly.
Coat
Parts to be coated with adhesives
and lubricants etc.
Oil, water
Places where oil, water or fuel
must be added, and their quantity.
Drain
Places where oil or water must be
drained, and quantity to be
drained.
HOW TO READ THE SHOP MANUAL
HOW TO READ THE SHOP MANUAL
00-6 PC12R,15R-8
Item number (10. Structure
and function)
Consecutive page number for
each item
10 - 3
7. REMOVAL OF THE STARTER MOTOR
Disconnect the negative terminal cable (-) from the
battery.
1 - Tip up the seat (1) and take out the toolbox (2).
2 - Disconnect the electric wiring (4) from the starter mo-
tor (3).
3 - Take out the screws (5) and remove the starter motor.
INSTALLATION OF THE STARTER
MOTOR
. To install, reverse the removal procedure.
Screw: 45 ± 52 Nm
30-7
REMOVAL AND INSTALLATION STARTER MOTOR
PC12R, 15R-8
RKPA0480
1
2
RKPA0490
3
5
4
8. REMOVAL OF THE ALTERNATOR
Disconnect the negative terminal cable (-) from the
battery.
1 - Tip up the seat (1) and take out the toolbox (2).
2 - Disconnect the connector (3).
3 - Loosen and take out the screws (4) and (5).
4 - Remove the alternator (6).
INSTALLATION OF THE ALTERNATOR
. To install, reverse the removal procedure.
Screws (4): 23 ± 29 Nm
Screws (5): 45 ± 52 Nm
H Adjust the tension of the fan belt. (For details, see «20.
CONTROLS AND ADJUSTMENTS»).
30-8
REMOVAL AND INSTALLATION ALTERNATOR
PC12R,15R-8
RKPA0480
1
2
RKPA0500
3
RKPA0510
4
5
6
9. REMOVAL OF THE PUMP GROUP
Disconnect the negative terminal cable (-) from the
battery.
1 - Remove the suction filter group (1) and the support-
ing bracket (2).
2 - Close the filter cock (3).
3 - Remove the fuel return tubes (4) from the injection
nozzles.
4 - Disconnect the fuel supply tube (6) from the pump
group (5).
5 - Remove the high-pressure tubes (7).
6 - Loosen and remove the nuts (8) and remove the
pumping group (5).
H Take care not to damage the shim underneath the
pump group.
INSTALLATION OF THE PUMPING
GROUP
. To install, reverse the removal procedure.
High-pressure tube unions: 29 ± 34 Nm
Nuts: 44 ± 53 Nm
H Check the fuel injection timing. (For details, see
«20. CONTROLS AND ADJUSTMENTS»).
30-9
REMOVAL AND INSTALLATION PUMP GROUP
PC12R, 15R-8
RKPA0520
2
1
RKPA0530
4
3
RKPA0540
7
5
6
8
10. REMOVAL OF THE INJECTION NOZZLES
1 - Remove the suction filter (1) and the supporting
bracket (2).
2 - Remove the high-pressure pipes (3) and the fuel re-
turn tubes (4).
3 - Remove the complete injection nozzles (5).
INSTALLATION OF THE
INJECTION NOZZLES
. To install, reverse the removal procedure.
High-pressure pipe unions: 29 ± 34 Nm
Injection nozzles: 50 ± 53 Nm
30-10
REMOVAL AND INSTALLATION INJECTION NOZZLES
PC12R,15R-8
RKPA0520
2
1
RKPA0550
4
5
5
3
11. REMOVAL OF THE CYLINDER HEAD
Disconnect the negative terminal cable (-) from the
battery.
H Drain the engine coolant.
Coolant: Approx. 3.2 ,
1 - Remove the engine hood (1), the expansion chamber
(2) and the relative supporting bracket.
2 - Remove the complete air filter (3) together with its
support.
3 - Remove the tail-pipe (4).
4 - Remove the injection pump supply tube (5) and the
fuel return tube (6) from the injection nozzles.
5 - Remove the fuel filter (7) without disconnecting the
tank supply and return tubes. Put it to one side.
6 - Tip up the seat (8) and take out the toolbox (9).
7 - Take out the screws (10), the nuts (11), and remove
the muffler (12).
30-11
REMOVAL AND INSTALLATION CYLINDER HEAD
PC12R, 15R-8
RKPA0560
2
3
1
RKPA0570
5
7
6
4
RKPA0481
8
9
RKPA0580
12
10
11
12. 8 - Remove the fan cover (13) and disconnect the fan-
cooling conveyor (14) from the radiator (15).
9 - Disconnect the engine coolant tubes (16) and (17)
from the pump.
10 - Remove the right-hand rear panel (18).
11 - Remove the oil-cooler (19) and put it to one side.
12 - Remove the radiator (15).
13 - Disconnect the coolant thermostat (20).
H Only for machines with cab heating:
disconnect the heating pipe (21) from the pump and
disconnect the return tube (22).
14 - Take out the screws (23) and remove the cooling fan
(24) and the spacer (25). Take out the fan-cooling
conveyor (14).
15 - Loosen the alternator drive belt and disengage the
pulley of the water pump.
16 - Remove the water pump (26) complete with joint (27)
and washer (28).
30-12
REMOVAL AND INSTALLATION CYLINDER HEAD
PC12R,15R-8
RKPA0590
17
15
14
16
RKPA0600
15 18
19
RKPA0521
13
22
21
20
27
24
26
28
23
25
RKP05180
13. 17 - Remove the high-pressure pipes (29).
18 - Disconnect the glow plug supply cable (30).
19 - Remove the valve tappet cover (31).
20 - Remove the rocker-arm shaft (32).
H Loosen the lock nuts and unscrew the valve tap-
pets by 2-3 turns.
21 - Take out the rocker-arm control rods (33).
22 - Take out the screws (34) in the sequence indicated
and remove the cylinder head (35).
H The cylinder head gasket (36) must be substituted
every time it is dismantled.
30-13
REMOVAL AND INSTALLATION CYLINDER HEAD
PC12R, 15R-8
RKPA0551
29
31
30
32
33
RKP05110
34
35
36
RKP05120
RKP05131
2
4
8
6
10
14
11
13
12 9
5
3
7
1
Intake side
Flywheelside
Fanside
Exhaust side
14. INSTALLATION OF THE CYLINDER HEAD
. To install, reverse the removal procedure.
1 - Fill up the cooling circuit.
Coolant: approx. 3.2 ,
2 - Start the engine to circulate the liquid through all cir-
cuits. Stop the engine and check the level.
H Only for machines with cab heating
Make sure that the heating cock is open.
Muffler screws and nuts: 23 ± 29 Nm
Rear guard screws: 108w11 Nm
H Adjust belt tension. (For details, see «20. CONTROLS
AND ADJUSTMENTS»).
H Check the gaskets:
Screws M6: 9.8 ± 11.7 Nm
Screws M8: 23 ± 28 Nm
High-pressure pipe unions: 29 ± 34 Nm
H Check that the valve tappets are firmly engaged in the
rods.
H Start tightening the rocker-arm shaft from the centre
outwards.
Rocker-arm shaft screws: 23 ± 28 Nm
H Adjust valve clearance. (For details, see «20. CON-
TROLS AND ADJUSTMENTS»).
H Raise the cylinder head, keeping it horizontal, and
place it on the gasket without shifting anything.
H Lubricate the screw-threadings with engine oil.
H Tighten the screws in the sequence indicated. (See
figure).
Cylinder head screws: 37.2 ± 41 Nm
30-14
REMOVAL AND INSTALLATION CYLINDER HEAD
PC12R,15R-8
RKP05141
7
9
13 6
8
3
5 4
2
10
12
14
1
Intake side
Flywheelside
Fanside
Exhaust side
11
15. REMOVAL OF THE OIL COOLER
Completely lower the working equipment until it is
resting on the ground and stop the engine.
Release all residual pressures from the circuits and
the tank. (For details, see «20. CONTROLS AND AD-
JUSTMENTS»).
1 - Remove the right-hand rear grill (1).
2 - Slowly loosen the clamps on tubes (2) and (3) in order
to drain the oil from the oil cooler and drainage tub-
ing.
Oil-cooler oil: approx. 0.3 ,
3 - Disconnect the tubes (2) and (3) and plug them to pre-
vent entry of any impurities.
4 - Take out the screws (4) and remove the oil-cooler (5).
INSTALLATION OF THE
OIL COOLER
. To install, reverse the removal procedure.
Rear grill screws: 108w11 Nm
H Fill the hydraulic oil tank with oil up to its maximum le-
vel.
Hydraulic oil required: approx. 0.3 ,
1 - Start the engine to fill the oil cooler and check that
there are no leaks.
2 - Stop the engine, check the level and, if necessary,
top it up.
30-15
REMOVAL AND INSTALLATION OIL COOLER
PC12R, 15R-8
RKPA0610
1
RKPA0620
2
3
5
4
16. REMOVAL OF THE RADIATOR
Completely lower the working equipment until it is
resting on the ground and stop the engine.
Release all residual pressures from the circuits and
the tank. (For details, see «20. CONTROLS AND AD-
JUSTMENTS»).
1 - Remove the right-hand rear grill (1).
2 - Remove the lower right-hand panel (2).
3 - Drain the Coolant.
Coolant: approx. 3.2 ,
4 - Remove the air filter and disconnect the tubes (3) and
(4) from the radiator.
5 - Take off the fan guard (5).
6 - Disconnect the fan-cooling conveyor (6).
7 - Remove the oil cooler (7) without disconnecting the
tubes and put it to one side.
8 - Take out the radiator screws (8).
9 - Remove the radiator (9).
INSTALLATION OF THE
RADIATOR
. To install, reverse the removal procedure.
H Fill up the cooling circuit.
Coolant: approx. 3.2 ,
H Add hydraulic oil to the tank. (See «INSTALLATION
OF THE OIL-COOLER»).
1 - Start the engine to circulate the Coolant throughout
the system and to fill the oil-cooler with oil.
2 - Stop the engine, check the levels and, if necessary,
top them up.
30-16
REMOVAL AND INSTALLATION RADIATOR
PC12R,15R-8
RKPA0611
1
2
RKPA0630
3
5
4
RKPA0591
6
9
RKPA0640
9
7
8
17. REMOVAL OF THE ENGINE HOOD
Completely lower the working equipment until it is
resting on the ground and stop the engine.
1 - Block the engine hood (1) in its raised position, take
out the screws (2) that fasten the hinge (3) to the
frame and remove the hood.
INSTALLATION OF THE
ENGINE HOOD
. To install, reverse the removal procedure.
H Check the alignment of the outside edges, the center-
ing and the adjustment of the closing mechanism (4).
30-17
REMOVAL AND INSTALLATION ENGINE HOOD
PC12R, 15R-8
RKPA0650
3
2
2
1
3
RKPA2070
4
18. REMOVAL OF CAB AND CANOPY
Completely lower the working equipment until it is
resting on the ground and stop the engine and take
out the ignition key.
1. Removal of the canopy
1 - Attach the canopy (1) to some hoisting tackle.
2 - Loosen and remove the screws (2) and (3).
3 - Remove the canopy.
2. Removal of the cab
1 - Disconnect the connector (4).
2 - Remove the cover (5).
3 - Take out the screws (6) and remove the heater (7),
putting it to one side.
4 - Remove the front cover (8).
30-18
REMOVAL AND INSTALLATION CAB AND CANOPY
PC12R,15R-8
RKPA0660
2
1
3
RKPA0670
6
5
4
6
7
RKPA0680
8
19. 5 - Remove the rear shelf (9).
6 - Attach the cab (10) to some hoisting tackle.
7 - Loosen and remove the front and rear screws (11)
and nuts (12).
8 - Remove the cab (10).
INSTALLATION OF CANOPY
AND CAB
. To install, reverse the removal procedure.
Canopy screws: 108w11 Nm
Cab screws: 108w11 Nm
30-19
REMOVAL AND INSTALLATION CAB AND CANOPY
PC12R, 15R-8
RKPA0690
9
RKPA0700
10
RKPA0710
11 12
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. REMOVAL OF THE HEATING FAN
Completely lower the working equipment until it is
resting on the ground and stop the engine and take
out the ignition key.
H Drain the engine coolant.
Coolant: approx. 3.2 ,
1 - Disconnect the connector (1).
2 - Remove the cover (2).
3 - Loosen the clamps and disconnect the heating pipes
(4) and (5) from the radiator (3).
4 - Remove the fan group (6).
INSTALLATION OF THE HEATER FAN
. To install, reverse the removal procedure.
H Check that the lower diffuser engages in its union.
1 - Make sure that the heating cock is fully open.
2 - Fill up the coolant circuit.
Coolant: approx. 3.2 ,
3 - Start the engine to circulate the coolant.
4 - Stop the engine and top up the level.
30-20
REMOVAL AND INSTALLATION HEATING FAN
PC12R,15R-8
RKPA0720
2
1
RKPA0730
3
6
4 5
22. REMOVAL OF THE REAR COUNTERWEIGHT
Completely lower the working equipment until it is
resting on the ground and stop the engine.
1 - Remove the rear side grills (1) and (2).
2 - Remove the hood fastener (3).
3 - Loosen the counterweight screws (4) to eliminate the
tightening torque.
4 - Attach the counterweight (5) to some hoisting tackle,
remove the screws, and pull out the counterweight
(5).
INSTALLATION OF THE REAR
COUNTERWEIGHT
. To install, reverse the removal procedure.
Grill screws: 108w11 Nm
Counterweight screws: Loctite 262
Counterweight screws: 268w29 Nm
30-21
REMOVAL AND INSTALLATION REAR COUNTERWEIGHT
PC12R, 15R-8
RKPA0612
1
2
5
RKPA2071
3
RKPA2080
4
5
23. REMOVAL OF THE TOP COVER AND SIDE PANELS
Completely lower the working equipment until it is
resting on the ground, stop the engine and take
out the ignition key.
1. Top cover
1 - Remove the arm-rests (1).
2 - Remove the seat (2) complete with its support and
the toolbox (3).
3 - Remove the knobs (4) and (5) from the accelerator
and blade levers. Pull off the rubber sleeves (6).
4 - Remove the accelerator and blade command
guard (7).
5 - Remove the core-hitch and push the connector (8)
inside the casing.
6 - Remove the cap (9) of the diesel fuel tank.
30-22
REMOVAL AND INSTALLATION TOP COVER AND SIDE PANELS
PC12R,15R-8
RKPA0750
1 1
RKPA0482
3
2
RKPA0760
7
6
4
5
6
8
RKPA0770
9
10