- The document provides instructions for removing and installing various engine components, including the starter motor, alternator, injection pump, injection nozzles, and cylinder head.
- The procedures note important steps like disconnecting the battery and draining coolant before removal. Precautions are provided for items under pressure.
- Reinstallation is the reverse of removal, noting proper torque specifications and checks like fuel injection timing adjustment.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upifkskjdksmem
The document provides instructions for removing a starter motor from an excavator. It begins by disconnecting the negative terminal of the battery. Then it lists the following steps: 1) Remove the cabin, 2) Move the operator's cab forward completely, 3) Loosen bolts and remove a cover, 4) Disconnect electrical connections to the starter motor, 5) Loosen mounting bolts and remove the starter motor. Safety precautions are emphasized throughout.
Komatsu pc20 r 8 hydraulic excavator service repair manual sn 10001 and upfjsjekkdmnem
This document is a shop manual for Komatsu PC20R, PC25R, and PC27R-8 excavators. It contains safety precautions and outlines the manual's organization. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. It provides technical information and instructions to aid technicians in performing repairs and maintenance on these excavator models.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)GingerHines
This document provides important safety instructions for repairing and servicing machines. It emphasizes that proper repair techniques described in the manual are safe methods. Some operations require specially designed tools from Komatsu. Symbols are used to mark safety precautions that should always be followed carefully. The document outlines general precautions like wearing protective equipment, preparing the work area safely, using lifting equipment properly, and taking safety measures for different repair operations.
Komatsu pc12 r 8 hydraulic excavator service repair manual snf30001 and upfjsjekkdmnem
The document provides instructions for removing and installing various engine components on an excavator, including the starter motor, alternator, fuel pump group, injection nozzles, and cylinder head. Safety precautions are outlined, and the steps for each removal and installation procedure are provided, along with the appropriate torque specifications.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualjfdjskmdmme
This document provides information on the structure, testing, removal/installation, and maintenance of components. It contains sections on structure and function, testing and adjusting, removal and installation, and maintenance standards. The document emphasizes safety precautions, such as wearing protective equipment, blocking parts from movement, and releasing pressures slowly. It provides instructions on how to read the manual, including page numbering, added pages, revisions, and symbols used to mark important information.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualifkskjdksmem
The document provides instructions for the removal and installation of various components on an excavator. It begins with general safety precautions for working on machinery. It then provides step-by-step instructions for removing and installing components like the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Precautions and torque specifications are included for each job.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upifkskjdksmem
The document provides instructions for removing a starter motor from an excavator. It begins by disconnecting the negative terminal of the battery. Then it lists the following steps: 1) Remove the cabin, 2) Move the operator's cab forward completely, 3) Loosen bolts and remove a cover, 4) Disconnect electrical connections to the starter motor, 5) Loosen mounting bolts and remove the starter motor. Safety precautions are emphasized throughout.
Komatsu pc20 r 8 hydraulic excavator service repair manual sn 10001 and upfjsjekkdmnem
This document is a shop manual for Komatsu PC20R, PC25R, and PC27R-8 excavators. It contains safety precautions and outlines the manual's organization. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. It provides technical information and instructions to aid technicians in performing repairs and maintenance on these excavator models.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)GingerHines
This document provides important safety instructions for repairing and servicing machines. It emphasizes that proper repair techniques described in the manual are safe methods. Some operations require specially designed tools from Komatsu. Symbols are used to mark safety precautions that should always be followed carefully. The document outlines general precautions like wearing protective equipment, preparing the work area safely, using lifting equipment properly, and taking safety measures for different repair operations.
Komatsu pc12 r 8 hydraulic excavator service repair manual snf30001 and upfjsjekkdmnem
The document provides instructions for removing and installing various engine components on an excavator, including the starter motor, alternator, fuel pump group, injection nozzles, and cylinder head. Safety precautions are outlined, and the steps for each removal and installation procedure are provided, along with the appropriate torque specifications.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualjfdjskmdmme
This document provides information on the structure, testing, removal/installation, and maintenance of components. It contains sections on structure and function, testing and adjusting, removal and installation, and maintenance standards. The document emphasizes safety precautions, such as wearing protective equipment, blocking parts from movement, and releasing pressures slowly. It provides instructions on how to read the manual, including page numbering, added pages, revisions, and symbols used to mark important information.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
Komatsu pc27 r 8, pc27r-8 (deluxe) hydraulic excavator service repair manualifkskjdksmem
The document provides instructions for the removal and installation of various components on an excavator. It begins with general safety precautions for working on machinery. It then provides step-by-step instructions for removing and installing components like the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Precautions and torque specifications are included for each job.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200243 and u...jjkdmsmmd
The document provides guidance on safety precautions, hoisting instructions, and standard tightening torques for maintenance and repair work. It outlines general safety practices like wearing protective equipment, blocking equipment, and draining fluids before working. It also covers hoisting heavy parts safely using wire ropes of adequate diameter and slinging loads from the middle of hooks. Standard tightening torques are provided for bolts, nuts, and flared fittings to ensure correct assembly.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200001 and u...jjkdmsmmd
The document provides guidance on safety precautions for maintenance work. It outlines general precautions like wearing protective equipment and blocking equipment before starting work. It describes preparations for work like lowering equipment, supporting the machine, and cleaning work areas. Precautions during work are also covered, such as releasing pressure slowly and waiting for components to cool. Standard tightening torques and hoisting instructions are included as well.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upifkskjdksmem
The document provides instructions for removing and installing various components on an excavator, including the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Safety precautions are outlined and each removal and installation procedure is described in step-by-step detail, with accompanying diagrams labeling the relevant parts. Tightening specifications and other technical details are provided.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes steps for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes procedures for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pw95 r 2 hydraulic excavator service repair manual sn21d0220001 and upfhjsjkdmemm
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical systems require special precautions when servicing.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0220001 and up...fujskekdjdmkm3e
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical sources should be disconnected as well.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0210001 and up...fujskekdjdmkm3e
This document provides safety instructions and guidelines for servicing and repairing Komatsu equipment. It emphasizes taking necessary safety precautions when working, such as wearing proper protective equipment. The document outlines general safety practices like blocking equipment, relieving hydraulic pressures, and using lifting equipment properly. It also provides instructions on how to read the shop manual, including its organization, symbols used, and hoisting parts.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0210001 and u...jjkdmsmmd
This document provides safety information and instructions for properly servicing and repairing Komatsu Utility machines. It outlines general safety precautions that should be followed, including wearing proper protective equipment and blocking the machine before starting work. The document also provides instructions on hoisting heavy components, tightening torques for bolts and nuts, and how to read the shop manual, which is divided into sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing machinery. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is also given for removing a starter motor from machinery.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f22262 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing equipment. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is given for removing a starter motor from an engine.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dikskkdmmdd
This document provides important safety instructions for repairing machines. It emphasizes that proper service and repair techniques are effective and safe. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing protective equipment, agreeing on operating procedures with other workers, keeping work areas clean and organized, and preparing machines safely for work by lowering or securing equipment.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)fjskekmdm
This document provides important safety instructions for servicing and repairing machinery:
1. Proper service and repair using the recommended techniques from the manufacturer's manual is important for safe machine operation. Special tools may be required for some operations.
2. Safety symbols are used throughout the manual to mark important safety precautions that should always be followed carefully. Safety should be the top priority, especially in dangerous situations.
3. Precautions are outlined for operations involving tools, welding, working with others, keeping work areas clean and organized, preparing machines for work, and working on pressurized components and hot fluids. Proper lifting of heavy components using hoists or cranes is also covered.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dfjjsjkemmm
This document provides important safety instructions for servicing and repairing machines. It emphasizes that proper service and repair techniques described in the manual are effective and safe methods. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing proper protective equipment, agreeing on operating procedures with other workers, and keeping the work area clean and organized. It also provides preparations for work, such as parking the machine securely, lowering equipment, and removing mud and oil from access areas.
The document is a parts catalog for a Massey Ferguson TH.8043 130 ST4A tractor. It contains 14 sections that list parts for different systems of the tractor, including the engine and fuel system, frame and suspension, drive train, hydraulics, electrical system, and others. Each section contains multiple pages listing the individual parts, part numbers, quantities, and descriptions for that system. The parts catalog provides extensive detail on replacement parts for repair and maintenance of the Massey Ferguson tractor.
Massey ferguson th.6030 st3 a telescopic handler (b3gd14000 999 b3ge14000-99...fjsjekkdmnem
This document is a table of contents and sections for repair and maintenance of a Massey Ferguson TH.6030 ST3A telescopic handler. It outlines 14 main systems of the vehicle in individual sections, including the engine and fuel system, frame and suspension, steering, brakes, hydraulics, electrical system, and others. Each section includes item numbers, part numbers, quantities and descriptions of components for that system.
This document contains a table of contents and sections for repair and maintenance of a Massey Ferguson MF 9305 ST3A telescopic handler, including its engine, fuel and exhaust systems, frame, steering, drivetrain, brakes, hydraulics, electrical systems, cab, chassis, decals, wheels, articulating arm, hitch, hydrostatic system, and attachments. The sections provide part numbers, quantities, descriptions and other specifications for components.
This document provides parts information for Massey Ferguson MF 8925/8926 telescopic handlers, including diagrams labeling parts and their corresponding part numbers. It contains detailed lists of parts for various systems of the vehicle like the frame, counterweights, fuel system, engine cover, engine support, and cab. Each part is listed with its number, quantity used, description, and any additional comments. The diagrams provide visual context to identify the location and purpose of each listed part.
Massey ferguson mf 6690 combine hybrid class 5 tier3 parts catalogue manualfjsjekkdmnem
This document provides specifications for parts related to the cylinder block component of a Massey Ferguson MF 6690 combine engine. It contains 40 numbered items listing part numbers, quantities, and brief descriptions for the cylinder block and related parts, including the cylinder block itself, camshaft bearing bushes, cylinder liners, piston cooling jets, plugs, seals, and other components.
This document provides the assembly procedure for an M318 excavator transmission. It lists over 30 detailed steps and requires various specialty tools. The procedure involves assembling internal gears, installing seals and bearings, and setting precise clearances. Cleanliness is critical and all parts must be cleaned before assembly.
Massey ferguson mf 5690 combine hybrid class 4 tier3 parts catalogue manualfjsjekkdmnem
This document provides the table of contents and specifications for the engine, fuel, exhaust and cooling systems of a Massey Ferguson MF 5690 COMBINE HYBRID CLASS 4 - TIER3. It includes over 40 pages detailing over 1000 individual parts that make up these core systems, with images and descriptions for each part listed. The systems covered include the engine, power take-off, cooling radiator, drains, rotary screen and accessories like the air cleaner and ladder.
Massey ferguson mf 4690 combine hybrid class 4 tier3 parts catalogue manualfjsjekkdmnem
This document provides a parts list and technical specifications for the cylinder block of a Massey Ferguson MF 4690 COMBINE HYBRID CLASS 4 - TIER3 engine. It lists 40 parts that make up the cylinder block, including the cylinder block itself, camshaft bearing bushes, cylinder liners, plugs, seals, and other components. Each part is identified by part number and quantity used.
More Related Content
Similar to Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and up
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200243 and u...jjkdmsmmd
The document provides guidance on safety precautions, hoisting instructions, and standard tightening torques for maintenance and repair work. It outlines general safety practices like wearing protective equipment, blocking equipment, and draining fluids before working. It also covers hoisting heavy parts safely using wire ropes of adequate diameter and slinging loads from the middle of hooks. Standard tightening torques are provided for bolts, nuts, and flared fittings to ensure correct assembly.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0200001 and u...jjkdmsmmd
The document provides guidance on safety precautions for maintenance work. It outlines general precautions like wearing protective equipment and blocking equipment before starting work. It describes preparations for work like lowering equipment, supporting the machine, and cleaning work areas. Precautions during work are also covered, such as releasing pressure slowly and waiting for components to cool. Standard tightening torques and hoisting instructions are included as well.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upifkskjdksmem
The document provides instructions for removing and installing various components on an excavator, including the starter motor, alternator, injection pump, nozzle holder, and water coolant pump. Safety precautions are outlined and each removal and installation procedure is described in step-by-step detail, with accompanying diagrams labeling the relevant parts. Tightening specifications and other technical details are provided.
Komatsu pc20 r 8 hydraulic excavator service repair manual snf30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes steps for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pc27 r 8 hydraulic excavator service repair manual sn f30001 and upfjskekazxdmmme
The document provides instructions on safely working on and repairing equipment. It outlines general precautions like wearing protective gear, blocking equipment, and draining fluids. It also describes procedures for specific tasks like removing covers, hoisting heavy components, and draining oil or fuel. Safety symbols are used to mark important points about safety and quality.
Komatsu pw95 r 2 hydraulic excavator service repair manual sn21d0220001 and upfhjsjkdmemm
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical systems require special precautions when servicing.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0220001 and up...fujskekdjdmkm3e
This document provides safety information and instructions for servicing a PW95R-2 machine. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. Safety is the top priority when working on the machine, and all safety signs and instructions must be carefully followed. Proper protective equipment should be worn. The machine must be properly supported and secured before starting any work. Fuel and electrical sources should be disconnected as well.
Komatsu PW95R-2 Hydraulic Excavator Service Repair Manual SN21D0210001 and up...fujskekdjdmkm3e
This document provides safety instructions and guidelines for servicing and repairing Komatsu equipment. It emphasizes taking necessary safety precautions when working, such as wearing proper protective equipment. The document outlines general safety practices like blocking equipment, relieving hydraulic pressures, and using lifting equipment properly. It also provides instructions on how to read the shop manual, including its organization, symbols used, and hoisting parts.
Komatsu PW75R-2 Hydraulic Excavator Service Repair Manual SN:22E0210001 and u...jjkdmsmmd
This document provides safety information and instructions for properly servicing and repairing Komatsu Utility machines. It outlines general safety precautions that should be followed, including wearing proper protective equipment and blocking the machine before starting work. The document also provides instructions on hoisting heavy components, tightening torques for bolts and nuts, and how to read the shop manual, which is divided into sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing machinery. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is also given for removing a starter motor from machinery.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn f22262 and upfjskekazxdmmme
The document provides instructions and safety precautions for working on and repairing equipment. It discusses the structure and contents of the repair manual, including sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It explains how to read page numbers, find revised pages, and understand symbols used for important points about safety and procedures. An example is given for removing a starter motor from an engine.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dikskkdmmdd
This document provides important safety instructions for repairing machines. It emphasizes that proper service and repair techniques are effective and safe. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing protective equipment, agreeing on operating procedures with other workers, keeping work areas clean and organized, and preparing machines safely for work by lowering or securing equipment.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)fjskekmdm
This document provides important safety instructions for servicing and repairing machinery:
1. Proper service and repair using the recommended techniques from the manufacturer's manual is important for safe machine operation. Special tools may be required for some operations.
2. Safety symbols are used throughout the manual to mark important safety precautions that should always be followed carefully. Safety should be the top priority, especially in dangerous situations.
3. Precautions are outlined for operations involving tools, welding, working with others, keeping work areas clean and organized, preparing machines for work, and working on pressurized components and hot fluids. Proper lifting of heavy components using hoists or cranes is also covered.
Komatsu wd600 1 wheel dozer service repair manual (sn 10001 and up)dfjjsjkemmm
This document provides important safety instructions for servicing and repairing machines. It emphasizes that proper service and repair techniques described in the manual are effective and safe methods. Several safety symbols are used to mark important cautions that should always be followed carefully. The document outlines general safety precautions including wearing proper protective equipment, agreeing on operating procedures with other workers, and keeping the work area clean and organized. It also provides preparations for work, such as parking the machine securely, lowering equipment, and removing mud and oil from access areas.
Similar to Komatsu pc15 r 8 hydraulic excavator service repair manual sn f21803 and up (14)
The document is a parts catalog for a Massey Ferguson TH.8043 130 ST4A tractor. It contains 14 sections that list parts for different systems of the tractor, including the engine and fuel system, frame and suspension, drive train, hydraulics, electrical system, and others. Each section contains multiple pages listing the individual parts, part numbers, quantities, and descriptions for that system. The parts catalog provides extensive detail on replacement parts for repair and maintenance of the Massey Ferguson tractor.
Massey ferguson th.6030 st3 a telescopic handler (b3gd14000 999 b3ge14000-99...fjsjekkdmnem
This document is a table of contents and sections for repair and maintenance of a Massey Ferguson TH.6030 ST3A telescopic handler. It outlines 14 main systems of the vehicle in individual sections, including the engine and fuel system, frame and suspension, steering, brakes, hydraulics, electrical system, and others. Each section includes item numbers, part numbers, quantities and descriptions of components for that system.
This document contains a table of contents and sections for repair and maintenance of a Massey Ferguson MF 9305 ST3A telescopic handler, including its engine, fuel and exhaust systems, frame, steering, drivetrain, brakes, hydraulics, electrical systems, cab, chassis, decals, wheels, articulating arm, hitch, hydrostatic system, and attachments. The sections provide part numbers, quantities, descriptions and other specifications for components.
This document provides parts information for Massey Ferguson MF 8925/8926 telescopic handlers, including diagrams labeling parts and their corresponding part numbers. It contains detailed lists of parts for various systems of the vehicle like the frame, counterweights, fuel system, engine cover, engine support, and cab. Each part is listed with its number, quantity used, description, and any additional comments. The diagrams provide visual context to identify the location and purpose of each listed part.
Massey ferguson mf 6690 combine hybrid class 5 tier3 parts catalogue manualfjsjekkdmnem
This document provides specifications for parts related to the cylinder block component of a Massey Ferguson MF 6690 combine engine. It contains 40 numbered items listing part numbers, quantities, and brief descriptions for the cylinder block and related parts, including the cylinder block itself, camshaft bearing bushes, cylinder liners, piston cooling jets, plugs, seals, and other components.
This document provides the assembly procedure for an M318 excavator transmission. It lists over 30 detailed steps and requires various specialty tools. The procedure involves assembling internal gears, installing seals and bearings, and setting precise clearances. Cleanliness is critical and all parts must be cleaned before assembly.
Massey ferguson mf 5690 combine hybrid class 4 tier3 parts catalogue manualfjsjekkdmnem
This document provides the table of contents and specifications for the engine, fuel, exhaust and cooling systems of a Massey Ferguson MF 5690 COMBINE HYBRID CLASS 4 - TIER3. It includes over 40 pages detailing over 1000 individual parts that make up these core systems, with images and descriptions for each part listed. The systems covered include the engine, power take-off, cooling radiator, drains, rotary screen and accessories like the air cleaner and ladder.
Massey ferguson mf 4690 combine hybrid class 4 tier3 parts catalogue manualfjsjekkdmnem
This document provides a parts list and technical specifications for the cylinder block of a Massey Ferguson MF 4690 COMBINE HYBRID CLASS 4 - TIER3 engine. It lists 40 parts that make up the cylinder block, including the cylinder block itself, camshaft bearing bushes, cylinder liners, plugs, seals, and other components. Each part is identified by part number and quantity used.
This document provides disassembly instructions for the final drive carriers, hubs, and brakes of the rear and front axles of an M318 Excavator. It outlines 32 steps to disassemble the rear axle components which include removing drain plugs, planetary carriers, gears, discs, seals, and other parts. It then provides 9 steps to disassemble the front axle planetary carrier. Required tools are listed. Safety notices are also provided.
This document contains a table of contents and sections for a service manual for a Massey Ferguson 9545/9565 combine. The table of contents lists 21 sections related to different systems of the combine, including the engine and fuel system, drive system, axles, frame and more. One section summarized here is the exhaust installation section, which includes a diagram and lists of parts related to the exhaust system, such as exhaust pipes, clamps, and shields.
Kubota mx5100 h tractor parts catalogue manualfjsjekkdmnem
This parts book provides information on parts for an engine. It lists part numbers, names, quantities, interchangeability, serial number ranges and other details. Notes explain country codes that may be included and differences in other regions. The document is intended to allow identification of correct replacement parts by part number and serial number range.
Clark npr 20 forklift service repair manualfjsjekkdmnem
This document is the service manual for Clark NPR-345 trucks. It contains safety cautions and detailed instructions for maintenance, repair, and overhaul of systems including electrical, hydraulic, brakes, steering, and other components. The manual is copyrighted and intended only for Clark dealers. It includes a table of contents listing the sections and their page numbers, along with pictorial indexes to identify components.
This document provides assembly instructions for a rear differential in 3 steps or less:
1. Determine the correct shim thickness for the inner pinion bearing using a series of measurement calculations.
2. Adjust the rolling torque of the pinion shaft by changing the shim thickness until it measures within specifications.
3. Assemble the remaining differential components like the ring gear, case halves, and differential gears.
Clark npr 17 forklift service repair manualfjsjekkdmnem
This document is the service manual for Clark NPR-345 trucks. It contains safety cautions and detailed instructions for maintenance, repair, and overhaul of systems including electrical, hydraulic, brakes, steering, and other components. The manual is copyrighted and intended only for Clark dealers. It includes a table of contents that lists all sections by group number, section number, and page number for easy reference to specific repair procedures. Pictorial indexes provide illustrations of components.
Caterpillar cat m320 f wheeled excavator (prefix fb2) service repair manual (...fjsjekkdmnem
This document provides assembly instructions for a piston pump used in a wheeled excavator model M320F. It consists of 50 steps to assemble the various components of the pump in the correct order. The components include springs, retainers, seals, valves, plates, bushings, shafts, and other parts. Precautions are provided for parts that are spring loaded to prevent injury during assembly.
Caterpillar cat m320 f wheeled excavator (prefix f2w) service repair manual (...fjsjekkdmnem
The document provides instructions for disassembling and assembling the rear axle of a M320F Wheeled Excavator. It lists the required tools and gives step-by-step instructions for removing components such as the carrier housing, planetary gears, brake discs, and hub. Reassembly instructions are also provided, describing how to install components like the thrust washer, carrier gear, and retaining rings. The purpose is to repair or replace parts in the rear axle transmission.
This document provides instructions for removing a crankshaft from a Caterpillar 3116 engine. The steps include:
1. Removing the cylinder head, crankshaft rear seal carrier, and front gear group.
2. Removing the crankshaft main bearing caps and bearings.
3. Using a bearing removal tool to pull the crankshaft from the engine block.
John deere 1565 front mower service repair manualfjsjekkdmnem
This technical manual provides service information for John Deere front mowers models 1420, 1435, 1445, 1545, and 1565. The manual is organized into specific sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, operation and diagnostics, tests and adjustments, repair, and safety precautions. Technicians are advised to follow all safety procedures when servicing equipment to avoid injury from hazards like high pressure fluids, moving parts, hot surfaces, and heavy components.
John deere 1545 front mower service repair manualfjsjekkdmnem
The brakes on the machine are not engaging or holding the machine. Possible causes include issues with the park brake lock lever assembly, brake linkage adjustment, brake return springs, brake friction disks, or brake separator plates. The manual provides procedures to check each component and make any necessary repairs or adjustments.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
3. GENERAL PRECAUTIONS
Mistakes in operation extremely dangerous.
Read all the Operation and Maintenance Manual care-
fully BEFORE operating the machine.
1. Before carrying out any greasing or repairs, read
all the precautions written on the decals which
are suck on the machine.
2. When carrying out any operation, always wear
safety shoes and helmet. Do not wear loose work
clothes, or clothes with buttons missing.
. Always wear safety glasses when hitting parts
with a hammer.
. Always wear safety glasses when grinding
parts with a grinder, etc.
3. If welding repairs are needed, always have a
trained, experienced welder carry out the work.
When carrying out welding work, always wear
welding gloves, apron, glasses, cap and other
clothes suited for welding work.
4. When carrying out any operation with two or more
workers, always agree on the operating procedure
before starting. Always inform your fellow workers
before starting any step of the operation. Before
starting work, hang UNDER REPAIR signs on
the controls in the operator's compartment.
5. Keep all tools in good condition and learn the cor-
rect way to use them.
6. Decide a place in the repair workshop to keep
tools and removed parts. Always keep the tools
and parts in their correct places. Always keep
the work area clean and make sure that there is
no dirt or oil on the floor.
Smoke only in the areas provided for smoking.
Never smoke while working.
PREPARATIONS FOR WORK
7. Before adding or making any repairs, park the ma-
chine on hard, level ground, and block the tracks
to prevent the machine from moving.
8. Before starting work, lower blade, bucket or any
other work equipment to the ground. If this is
not possible, use blocks to prevent the work
equipment from falling down. In addition, be sure
to lock all the control levers and hang warning
sign on them.
9. When disassembling or assembling, support the
machine with blocks, jacks or stands before start-
ing work.
10. Remove all mud and oil from the steps or other
places used to get on and off the machine. Always
use the handrails, ladders or steps when getting
on or off the machine.
Never jump on or off the machine.
If it is impossible to use the handrails, ladders or
steps, use a stand to provide safe footing.
PRECAUTIONS DURING WORK
11. When removing the oil filler cap, drain plug or hy-
draulic pressure measuring plugs, loosen them
slowly to prevent the oil from spurting out.
Before disconnecting or removing components of
the hydraulic circuit and engine cooling circuit,
first remove the pressure completely from the cir-
cuit.
12. The water and oil in the circuits are not hot when
the engine in stopped, so be careful not to get
burned.
Wait for the oil water to cool before carrying out
any work on the cooling water circuits.
00-3PC15R-8
IMPORTANT SAFETY NOTICE
Proper service and repair is extremely important for the safe operation of your machine.
The service and repair techniques recommended by Komatsu and describe in this manual are both ef-
fective and safe methods of operation. Some of these operations require the use of tools specially de-
signed by Komatsu for the purpose.
To prevent injury to workers, the symbols and are used to mark safety precautions in this man-
ual. The cautions accompanying these symbols should always be carefully followed. If any danger arises
or may possibly arise, first consider safety, and take necessary steps to face.
SAFETY
4. 13. Before starting work, remove the leads from the
battery. Always remove the lead from the negative
( ± ) terminal first.
14. When raising heavy components, use a hoist or
crane. Check that the wire rope, chains and hooks
are free from damage.
Always use lifting equipment which has ample ca-
pacity. Install the lifting equipment at the correct
places.
Use a hoist or crane and operate slowly to prevent
the component from hitting any other part.
Do not work with any part still raised by the hoist
or crane.
15. When removing covers which are under internal
pressure or under pressure from a spring, always
leave two bolts in position on opposite sides.
Slowly release the pressure, then slowly loosen
the bolts to remove.
16. When removing components, be careful not to
break or damage the wiring.
Damage wiring may cause electrical fires.
17. When removing piping, stop the fuel or oil from
spilling out. If any fuel or oil drips on to the floor,
wipe it up immediately.
Fuel or oil on the floor can cause you to slip, or
can even start fires.
18. As a general rule, do not use gasoline to wash
parts. In particular, use only the minimum of gaso-
line when washing electrical parts.
19. Be sure to assemble all parts again in their origi-
nal places. Replace any damage parts with new
parts.
When installing hoses and wires, be sure that
they will not be damaged by conctat with other
parts when the machine is being operated.
20. When installing high pressure hoses, make sure
that they are not twisted. Damaged tubes are dan-
gerous, so be extremely careful when installing
tubes for high pressure circuits. Also, check that
connecting parts are correctly tightened.
21. When assembling or installing parts, always use
specified tightening torques.
When installing the parts which vibrate violently or
rotate at high speed, be particulary careful to
check that they are correctly installed.
22. When aligning two holes, never insert your fingers
or hand.
23. When measuring hydraulic pressure, check that
the measuring tool is correctly assembled before
taking any measurement.
24. Take sure when removing or installing tracks.
When removing the track, the track separates
suddenly, so never let anyone stand at either
end of the track.
00-4 PC15R-8
5. 00-5PC15R-8
FOREWORD
This shop manual has been prepared as an aid to improve the quality of repairs by giving the operator an ac-
curate understanding of the product and by showing him the correct way to perform repairs and make judgements.
Make sure you understand the contents of this manual and use it to full effect at every opportunity.
This shop manual mainly contains the necessary technical information for operations performed in a service
workshop.
The manual is divided into chapters on each main group of components; these chapters are further divided into
the following sections.
STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give an under-
standing of the structure, but also serves as reference material for troubleshooting.
TESTING AND ADJUSTING
This sections explains checks to be made before and after performing repairs, as well as adjustments to be
made at completion of the checks and repairs.
Troubleshooting charts correlating «Problems» to «Causes» are also included in this section.
DISASSEMBLY AND ASSEMBLY
This section explains the order to be followed when removing, installing, disassembling or assembling
each component, as well as precautions to be taken for these operations.
MAINTENANCE STANDARD
This section gives the judgement standards when inspecting disassembled parts.
NOTICE
The specifications contained in this shop manual are subject to change at any time and without any
notice.
Contact your Komatsu distributor for the latest information.
6. VOLUMES
Shop manual are issued as a guide to carry out re-
pairs. These various volumes are designed to avoid
duplicating the same information.
DISTRIBUTION AND UPDATING
Any additions, amendments or other changes will
be sent to Komatsu distributors.
Get the most up-to-date information before you start
any work.
FILING METHOD
1. See the page number on the bottom of the page.
File the pages in correct order.
2. Following examples show you how to read the
page number.
Example
3. Additional pages: additional pages are indicated
by a hyphen (-) and number after the page num-
ber.
Fle as in the example.
Example:
10-4
10-4-1
10-4-2
10-5
] Added pages
REVISED EDITION MARK
(1 2 3 ....)
When a manual is revised, an edition mark is re-
corded on the bottom outside corner of the pages.
REVISIONS
Revised pages are shown on the LIST OF RE-
VISED PAGES between the title page and SAFETY
page.
SYMBOLS
In order to make the shop manual greatly chelpful,
important points about safety and quality are marked
with the following symbols.
Symbol Item Remarks
Safety
Special safety precautions are ne-
cessary when performing the
work.
Extra special safety precautions
are necessary when performing
the work because it is under inter-
nal pressure.
Caution
Special technical precautions or
other precautions for preserving
standards are necessary when
performing the work.
Weight
Weight of parts or systems.
Caution necessary when selecting
hoisting wire, or when working
posture is important, etc.
Tightening
torque
Parts that require special attention
for the tightening torque during as-
sembly.
Coat
Parts to be coated with adhesives
and lubricants etc.
Oil, water
Places where oil, water or fuel
must be added, and their quantity.
Drain
Places where oil or water must be
drained, and quantity to be
drained.
HOW TO READ THE SHOP MANUAL
HOW TO READ THE SHOP MANUAL
00-6 PC15R-8
Item number (10. Structure
and function)
Consecutive page number for
each item
10 - 3
7. REMOVAL OF THE STARTER MOTOR
Disconnect the negative terminal cable (-) from the
battery.
1 - Tip up the seat (1) and take out the toolbox (2).
2 - Disconnect the electric wiring (4) from the starter mo-
tor (3).
3 - Take out the screws (5) and remove the starter motor.
INSTALLATION OF THE STARTER
MOTOR
. To install, reverse the removal procedure.
Screw: 45 ± 52 Nm (33.1 ± 38.3 lb.ft.)
30-7
REMOVAL AND INSTALLATION STARTER MOTOR
PC15R-8
RKPA0480
1
2
RKPA0490
3
5
4
8. REMOVAL OF THE ALTERNATOR
Disconnect the negative terminal cable (-) from the
battery.
1 - Tip up the seat (1) and take out the toolbox (2).
2 - Disconnect the connector (3).
3 - Loosen and take out the screws (4) and (5).
4 - Remove the alternator (6).
INSTALLATION OF THE ALTERNATOR
. To install, reverse the removal procedure.
Screws (4): 23 ± 29 Nm (16.9 ± 21.4 lb.ft.)
Screws (5): 45 ± 52 Nm (33.2 ± 38.3 lb.ft.)
H Adjust the tension of the fan belt. (For details, see «20.
CONTROLS AND ADJUSTMENTS»).
30-8
REMOVAL AND INSTALLATION ALTERNATOR
PC15R-8
RKPA0480
1
2
RKPA0500
3
RKPA0510
4
5
6
9. REMOVAL OF THE INJECTION PUMP
Disconnect the negative terminal cable (-) from the
battery.
1 - Remove the suction filter group (1) and the support-
ing bracket (2).
2 - Close the filter cock (3).
3 - Remove the fuel return tubes (4) from the injection
nozzles.
4 - Disconnect the fuel supply tube (6) from the pump
group (5).
5 - Remove the high-pressure tubes (7).
6 - Loosen and remove the nuts (8) and remove the
pumping group (5).
H Take care not to damage the shim underneath the
pump group.
INSTALLATION OF THE
INJECTION PUMP
. To install, reverse the removal procedure.
High-pressure tube unions:
29 ± 34 Nm (21.3 ± 25 lb.ft.)
Nuts: 44 ± 53 Nm (32.4 ± 39 lb.ft.)
H Check the fuel injection timing. (For details, see
«20. CONTROLS AND ADJUSTMENTS»).
30-9
REMOVAL AND INSTALLATION INJECTION PUMP
PC15R-8
RKPA0520
2
1
RKPA0530
4
3
RKPA0540
7
5
6
8
10. REMOVAL OF THE INJECTION NOZZLES
1 - Remove the suction filter (1) and the supporting
bracket (2).
2 - Remove the high-pressure pipes (3) and the fuel re-
turn tubes (4).
3 - Remove the complete injection nozzles (5).
INSTALLATION OF THE
INJECTION NOZZLES
. To install, reverse the removal procedure.
High-pressure pipe unions:
29 ± 34 Nm (21.3 ± 25 lb.ft.)
Injection nozzles: 50 ± 53 Nm (36.8 ± 39 lb.ft.)
30-10
REMOVAL AND INSTALLATION INJECTION NOZZLES
PC15R-8
RKPA0520
2
1
RKPA0550
4
5
5
3
11. REMOVAL OF THE CYLINDER HEAD
Disconnect the negative terminal cable (-) from the
battery.
H Drain the engine coolant.
Coolant: Approx. 3.2 , (0.9 US.gall)
1 - Remove the engine hood (1), the expansion chamber
(2) and the relative supporting bracket.
2 - Remove the complete air filter (3) together with its
support.
3 - Remove the tail-pipe (4).
4 - Remove the injection pump supply tube (5) and the
fuel return tube (6) from the injection nozzles.
5 - Remove the fuel filter (7) without disconnecting the
tank supply and return tubes. Put it to one side.
6 - Tip up the seat (8) and take out the toolbox (9).
7 - Take out the screws (10), the nuts (11), and remove
the muffler (12).
30-11
REMOVAL AND INSTALLATION CYLINDER HEAD
PC15R-8
RKPA0560
2
3
1
RKPA0570
5
7
6
4
RKPA0481
8
9
RKPA0580
12
10
11
12. 8 - Remove the fan cover (13) and disconnect the fan-
cooling conveyor (14) from the radiator (15).
9 - Disconnect the engine coolant tubes (16) and (17)
from the pump.
10 - Remove the right-hand rear panel (18).
11 - Remove the oil-cooler (19) and put it to one side.
12 - Remove the radiator (15).
13 - Disconnect the coolant thermostat (20).
H Only for machines with cab heating:
disconnect the heating pipe (21) from the pump and
disconnect the return tube (22).
14 - Take out the screws (23) and remove the cooling fan
(24) and the spacer (25). Take out the fan-cooling
conveyor (14).
15 - Loosen the alternator drive belt and disengage the
pulley of the water pump.
16 - Remove the water pump (26) complete with joint (27)
and washer (28).
30-12
REMOVAL AND INSTALLATION CYLINDER HEAD
PC15R-8
RKPA0590
17
15
14
16
RKPA0600
15 18
19
RKPA0521
13
22
21
20
27
24
26
28
23
25
RKP05180
13. 17 - Remove the high-pressure pipes (29).
18 - Disconnect the glow plug supply cable (30).
19 - Remove the valve tappet cover (31).
20 - Remove the rocker-arm shaft (32).
H Loosen the lock nuts and unscrew the valve tap-
pets by 2-3 turns.
21 - Take out the rocker-arm control rods (33).
22 - Take out the screws (34) in the sequence indicated
and remove the cylinder head (35).
H The cylinder head gasket (36) must be substituted
every time it is dismantled.
30-13
REMOVAL AND INSTALLATION CYLINDER HEAD
PC15R-8
RKPA0551
29
31
30
32
33
RKP05110
34
35
36
RKP05120
RKP05131
2
4
8
6
10
14
11
13
12 9
5
3
7
1
Intake side
Flywheelside
Fanside
Exhaust side
14. INSTALLATION OF THE CYLINDER HEAD
. To install, reverse the removal procedure.
1 - Fill up the cooling circuit.
Coolant: approx. 3.2 , (0.9 US.gall)
2 - Start the engine to circulate the liquid through all cir-
cuits. Stop the engine and check the level.
H Only for machines with cab heating
Make sure that the heating cock is open.
Muffler screws and nuts:
23 ± 29 Nm (16.9 ± 21.3 lb.ft.)
Rear guard screws:
108w11 Nm (79.6 ± 8.1 lb.ft.)
H Adjust belt tension. (For details, see «20. CONTROLS
AND ADJUSTMENTS»).
H Check the gaskets:
Screws M6: 9.8 ± 11.7 Nm (7.2 ± 8.6 lb.ft.)
Screws M8: 23 ± 28 Nm (16.9 ± 20.6 lb.ft.)
High-pressure pipe unions:
29 ± 34 Nm (21.3 ± 25 lb.ft.)
H Check that the valve tappets are firmly engaged in the
rods.
H Start tightening the rocker-arm shaft from the centre
outwards.
Rocker-arm shaft screws:
23 ± 28 Nm (16.9 ± 20.6 lb.ft.)
H Adjust valve clearance. (For details, see «20. CON-
TROLS AND ADJUSTMENTS»).
H Raise the cylinder head, keeping it horizontal, and
place it on the gasket without shifting anything.
H Lubricate the screw-threadings with engine oil.
H Tighten the screws in the sequence indicated.
(See figure).
Cylinder head screws:
37.2 ± 41 Nm (27.4 ± 30.2 lb.ft.)
30-14
REMOVAL AND INSTALLATION CYLINDER HEAD
PC15R-8
RKP05141
7
9
13 6
8
3
5 4
2
10
12
14
1
Intake side
Flywheelside
Fanside
Exhaust side
11
15. REMOVAL OF THE OIL COOLER
Completely lower the working equipment until it is
resting on the ground and stop the engine.
Release all residual pressures from the circuits and
the tank. (For details, see «20. CONTROLS AND AD-
JUSTMENTS»).
1 - Remove the right-hand rear grill (1).
2 - Slowly loosen the clamps on tubes (2) and (3) in order
to drain the oil from the oil cooler and drainage tub-
ing.
Oil-cooler oil: approx. 0.3 , (0.08 US.gall)
3 - Disconnect the tubes (2) and (3) and plug them to pre-
vent entry of any impurities.
4 - Take out the screws (4) and remove the oil-cooler (5).
INSTALLATION OF THE
OIL COOLER
. To install, reverse the removal procedure.
Rear grill screws: 108w11 Nm (79.6 ± 8.1 lb.ft.)
H Fill the hydraulic oil tank with oil up to its maximum le-
vel.
Hydraulic oil required:
approx. 0.3 , (0.08 US.gall)
1 - Start the engine to fill the oil cooler and check that
there are no leaks.
2 - Stop the engine, check the level and, if necessary,
top it up.
30-15
REMOVAL AND INSTALLATION OIL COOLER
PC15R-8
RKPA0610
1
RKPA0620
2
3
5
4
16. REMOVAL OF THE RADIATOR
Completely lower the working equipment until it is
resting on the ground and stop the engine.
Release all residual pressures from the circuits and
the tank. (For details, see «20. CONTROLS AND AD-
JUSTMENTS»).
1 - Remove the right-hand rear grill (1).
2 - Remove the lower right-hand panel (2).
3 - Drain the Coolant.
Coolant: approx. 3.2 , (0.9 US.gall)
4 - Remove the air filter and disconnect the tubes (3) and
(4) from the radiator.
5 - Take off the fan guard (5).
6 - Disconnect the fan-cooling conveyor (6).
7 - Remove the oil cooler (7) without disconnecting the
tubes and put it to one side.
8 - Take out the radiator screws (8).
9 - Remove the radiator (9).
INSTALLATION OF THE
RADIATOR
. To install, reverse the removal procedure.
H Fill up the cooling circuit.
Coolant: approx. 3.2 , (0.9 US.gall)
H Add hydraulic oil to the tank. (See «INSTALLATION
OF THE OIL-COOLER»).
1 - Start the engine to circulate the Coolant throughout
the system and to fill the oil-cooler with oil.
2 - Stop the engine, check the levels and, if necessary,
top them up.
30-16
REMOVAL AND INSTALLATION RADIATOR
PC15R-8
RKPA0611
1
2
RKPA0630
3
5
4
RKPA0591
6
9
RKPA0640
9
7
8
17. REMOVAL OF THE ENGINE HOOD
Completely lower the working equipment until it is
resting on the ground and stop the engine.
1 - Block the engine hood (1) in its raised position, take
out the screws (2) that fasten the hinge (3) to the
frame and remove the hood.
INSTALLATION OF THE
ENGINE HOOD
. To install, reverse the removal procedure.
H Check the alignment of the outside edges, the center-
ing and the adjustment of the closing mechanism (4).
30-17
REMOVAL AND INSTALLATION ENGINE HOOD
PC15R-8
RKPA0650
3
2
2
1
3
RKPA2070
4
18. REMOVAL OF CAB AND CANOPY
Completely lower the working equipment until it is
resting on the ground and stop the engine and take
out the ignition key.
1. Removal of the canopy
1 - Attach the canopy (1) to some hoisting tackle.
2 - Loosen and remove the screws (2) and (3).
3 - Remove the canopy.
2. Removal of the cab
1 - Disconnect the connector (4).
2 - Remove the cover (5).
3 - Take out the screws (6) and remove the heater (7),
putting it to one side.
4 - Remove the front cover (8).
30-18
REMOVAL AND INSTALLATION CAB AND CANOPY
PC15R-8
RKPA0660
2
1
3
RKPA0670
6
5
4
6
7
RKPA0680
8
19. 5 - Remove the rear shelf (9).
6 - Attach the cab (10) to some hoisting tackle.
7 - Loosen and remove the front and rear screws (11)
and nuts (12).
8 - Remove the cab (10).
INSTALLATION OF CANOPY
AND CAB
. To install, reverse the removal procedure.
Canopy screws: 108w11 Nm (79.6 ± 8.1 lb.ft.)
Cab screws: 108w11 Nm (79.6 ± 8.1 lb.ft.)
30-19
REMOVAL AND INSTALLATION CAB AND CANOPY
PC15R-8
RKPA0690
9
RKPA0700
10
RKPA0710
11 12
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. REMOVAL OF THE HEATING FAN
Completely lower the working equipment until it is
resting on the ground and stop the engine and take
out the ignition key.
H Drain the engine coolant.
Coolant: approx. 3.2 , (0.9 US.gall)
1 - Disconnect the connector (1).
2 - Remove the cover (2).
3 - Loosen the clamps and disconnect the heating pipes
(4) and (5) from the radiator (3).
4 - Remove the fan group (6).
INSTALLATION OF THE HEATER FAN
. To install, reverse the removal procedure.
H Check that the lower diffuser engages in its union.
1 - Make sure that the heating cock is fully open.
2 - Fill up the coolant circuit.
Coolant: approx. 3.2 , (0.9 US.gall)
3 - Start the engine to circulate the coolant.
4 - Stop the engine and top up the level.
30-20
REMOVAL AND INSTALLATION HEATING FAN
PC15R-8
RKPA0720
2
1
RKPA0730
3
6
4 5
22. REMOVAL OF THE REAR COUNTERWEIGHT
Completely lower the working equipment until it is
resting on the ground and stop the engine.
1 - Remove the rear side grills (1) and (2).
2 - Remove the hood fastener (3).
3 - Loosen the counterweight screws (4) to eliminate the
tightening torque.
4 - Attach the counterweight (5) to some hoisting tackle,
remove the screws, and pull out the counterweight
(5).
Counterweight: 48 kg (105.7 lb.)
INSTALLATION OF THE REAR
COUNTERWEIGHT
. To install, reverse the removal procedure.
Grill screws: 108w11 Nm (79.6 ± 8.1 lb.ft.)
Counterweight screws: Loctite 262
Counterweight screws:
268w29 Nm (197.5w21.3 lb.ft.)
30-21
REMOVAL AND INSTALLATION REAR COUNTERWEIGHT
PC15R-8
RKPA0612
1
2
5
RKPA2071
3
RKPA2080
4
5
23. REMOVAL OF THE TOP COVER AND SIDE PANELS
Completely lower the working equipment until it is
resting on the ground, stop the engine and take
out the ignition key.
1. Top cover
1 - Remove the arm-rests (1).
2 - Remove the seat (2) complete with its support and
the toolbox (3).
3 - Remove the knobs (4) and (5) from the accelerator
and blade levers. Pull off the rubber sleeves (6).
4 - Remove the accelerator and blade command
guard (7).
5 - Remove the core-hitch and push the connector (8)
inside the casing.
6 - Remove the cap (9) of the diesel fuel tank.
30-22
REMOVAL AND INSTALLATION TOP COVER AND SIDE PANELS
PC15R-8
RKPA0750
1 1
RKPA0482
3
2
RKPA0760
7
6
4
5
6
8
RKPA0770
9
10