Karan Rajpal has 5 years of experience as a Piping Stress Engineer at Alstom India Ltd. He has extensive experience modeling and analyzing piping systems using software like PDMS, Caesar 5.3, and Rohr2. He has worked on projects in India and Thailand, leading teams and analyzing critical high temperature piping. Karan holds a B.Tech in Mechanical Engineering and is knowledgeable about ASME piping codes. He enjoys playing sports and solving puzzles in his free time.
An enthusiastic Mechanical engineer with 1.5+Years of experience in the field of CAE with domain knowledge of Automotive assemblies using HyperMesh V12.0 and knowledge of Optistruct and Meshworks V7 and also possess a strong interest in working on design and analysis.
An enthusiastic Mechanical engineer with 1.5+Years of experience in the field of CAE with domain knowledge of Automotive assemblies using HyperMesh V12.0 and knowledge of Optistruct and Meshworks V7 and also possess a strong interest in working on design and analysis.
8+ years of experience in the field of Mechanical and Piping Engineering Design. A variety of successful projects for industrial, Chemical, Oil&Gas, Power with ASME standards codes, PDMS, AUTOCAD, Detailed piping design, 3D modelling and Fabrication drawings.
Current designation: Project Engineer-Material/Master data Management at HOFINCONS GROUP Pvt ltd looking for a new challenging platform to explore myself
8+ years of experience in the field of Mechanical and Piping Engineering Design. A variety of successful projects for industrial, Chemical, Oil&Gas, Power with ASME standards codes, PDMS, AUTOCAD, Detailed piping design, 3D modelling and Fabrication drawings.
Current designation: Project Engineer-Material/Master data Management at HOFINCONS GROUP Pvt ltd looking for a new challenging platform to explore myself
More than 1.10 years of experience into mechanical design engineer with good GDNT and casting new method design and development along with good at sheetmetal design
• Responsible for full Design Concept & full 3D modelling ecstatic look Interior and Exterior (Plastics) & Structure (Sheet metal).
• Optimizing the given product if necessary for manufacturing ease
• Support to manufacturing, planning and SSC team for Proto & Pilot development
• Finding the solution for Signoff Closure Points from the Manufacturer End
• Analysis and resolution of manufacturing, assembly line & field issues
• Review and verification of new component design for Manufacturing Feasibility (Plastic Injection Moulding items,& casting PDC items).
• Design Optimization done by eliminating sheet metal and replacing with plastic material for cost reduction
• Rendering the product as attractive look
• Problem identification in the product samples and Proceeding design modification if needed as well for production also.
• Own product design at ecstatic look ratio and using sheet metal ,plastics, rubber ,mechanism using for linear and rotary motion.
• Design releases for manufacturing the components from initial to final stage through PLM and ARENA
1. Curriculum Vitae
KARAN RAJPAL Contact no.: 08285564041
Email id.: karanrajpal1990@gmail.com
Objective
To work with a reputed company which would provide me with an opportunity to move ahead in the ever-
growing world of Piping and provide me with an environment and opportunities to work with my best
capabilities.
Professional Qualifications
Employment Profile : Working as Piping stress Engineer in Alstom India Ltd ( Turbine Area and
Boiler Area ) Experience – 5 years :
Worked at Site for Krishnapatnam NTPC (2 X 800 MW) project for Six months .
Modelling of Pipe Routing of Critical Piping (MS , HRH and CRH ) and extraction lines in
ghatampur project.
General Arrangement of equipment in 3Dmodel in Turbine Building.
Calculation of Pipe thickness and selection of pipe fittings and valves using ASME Codes..
Stress analysis of High Temperature piping using Tools Caeser 5.30 and Rohr II .
Modelling of Pipe Routing and Layout and generation of reports and isometrics using PDMS .
Support Selection and modelling using Licad and PDMS .
Technical Tender Analysis and Submission of piping BOM and Tonnage for Tenders .
Core Competencies:
Thorough Knowledge of ASME Code B31.1 , B31.3 ,36.10 ,16.9 ,16.11 , 16.10 ,16.34
Good hand in Tools Caeser 5.3 , PDMS , Rohr2, Navisworks , Autocad and MS Office.
Good communication and presentation Skills
Operating System : Windows XP/7/8
Major Project Undertaken
Currently Leading a Team of two engineer and two designer for analysis and drawing preparation.
NSL Ghatampur (2 X 660 MW) Project ( Presently Working in Turbine Area ) .
Modelling and Stress analysis Feed Water Piping and extraction piping in Turbine Area .
Modelling and stress analysis of Critical Piping ( MS , CRH , HRH ,HP&LP BYPASS ).
Examination
Discipline School/college
Board/
University
Year of
Passing
Marks
B.Tech
Mechanical
Engineering N.I.T. Kurukshetra
N.I.T.
Kurukshetra
2012
8.781/10
Secondary
Aggarwal public school
Faridabad
C.B.S.E.
2008
82.6%
Matriculation _
Tagore Academy Public
school
Faridabad
C.B.S.E. 2006 88.2%
2. General arrangement of equipment in 3d model in turbine building.
Maemo ( 1X 660 MW) Northern Thailand Project. ( 2015)
Leading Project for following Job in Boiler Area
Stress Analysis of High Temperature Piping using Caesar 2011.
Preparation and Checking of Isometric Drawings
NTPC Nevyeli project .(2014)
Stress Analysis of High Temperature Piping using Rohr II.
Selection and Modelling of supports using LICAD and PDMS.
Checking of Isometric Drawings.
NTPC Krishnapatnam (2 X 800 MW) Project . (2012-2013)
Deputed to Site for assembly of pressure parts and AirPreheaters providing suggestion to resolve
issues regarding NCRs that are found during assembly process.
Stress analysis ofSootBlower Piping in Yanbu Project with strict forces and moments on
nozzle using Rohr II .
Extra Curricular Activities/Achievements
Best perfoming Employee in Department in year 2014-2015
Participant in winning Team of Football Tournament in Alstom.
Won 1st
prize in Nimbus Quiz in Powerfest in NIT,Kurukshetra.
Won 2nd
prize in technical presentation in NIT Kurukshetra.
Training/Workshops
Six months on Job training at site for assembly of Pressure Parts and APH at krishnapatnam site in
Alstom India Ltd.
Attended PDCA Training in Alstom India Ltd .
Attended Six week Training at JCB India Pvt Ltd Ballabgarh and Whirlpool Faridabad in may 2010 and
2011
Hobbies
Playing Volleyball , Football .
Swimming .
Solving Sudoku .
DECLERATION
I hereby declare that all the data and information provided above are true and correct to the best of my
knowledge and I hold responsible myself for any irregularities if found.
(KARAN RAJPAL)