Jtc100 worm gear screw lifter,10t screw jack worm gear unit,10 ton worm gear screw lift,10 tonnes long stroke worm gear screw jack,100 kn worm gear wheel lifts,10000kg worm gear screw jack for lifting static load capacity 100 kn, high speed torque 67 n.m, low speed torque 21.5 n.m. lead screw (spindle) Tr55x9. high speed gear ratio 1/9, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack screw arrangement,50 ton screw jack lift,500 kn gear lift, screw jack vertical arrangement,50 tonnes acme screw adjuster mechanism static load capacity 500 kn, high speed torque 442 n.m, low speed torque 148 n.m. lead screw (spindle) Tr120x14. high speed gear ratio 1/14, low speed gear ratio 1/56. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 5500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nut screw jack,20 t 4 ft worm gear lift jack,200 kn worm screw lift assembly,20 tonnes cubical gearbox screw jack static load capacity 200 kn, high speed torque 146 n.m, low speed torque 48 n.m. lead screw (spindle) Tr70x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
The document describes the JTC25 worm gear lift jack from Jacton Electromechanical Co. It provides specifications for the jack, including a static load capacity of 25kn, gear ratios of 1/6 for high speed and 1/24 for low speed, and various configurations for the translating screw. It lists potential applications in industries like construction, mining, and manufacturing that involve lifting, positioning, or leveling equipment.
Jtc50 worm gear screw lifter,5t screw actuator worm gear, 5 t linear worm drive jack,50 kn fabricated worm screw jack,5 ton screw worm gearbox,5 tonnes worm wheel screw drive lift,5000kg worm screw lift static load capacity 50 kn, high speed torque 31 n.m, low speed torque 9.7 n.m. lead screw (spindle) Tr40x7. high speed gear ratio 1/7, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc100 worm gear screw lifter,10t screw jack worm gear unit,10 ton worm gear screw lift,10 tonnes long stroke worm gear screw jack,100 kn worm gear wheel lifts,10000kg worm gear screw jack for lifting static load capacity 100 kn, high speed torque 67 n.m, low speed torque 21.5 n.m. lead screw (spindle) Tr55x9. high speed gear ratio 1/9, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack screw arrangement,50 ton screw jack lift,500 kn gear lift, screw jack vertical arrangement,50 tonnes acme screw adjuster mechanism static load capacity 500 kn, high speed torque 442 n.m, low speed torque 148 n.m. lead screw (spindle) Tr120x14. high speed gear ratio 1/14, low speed gear ratio 1/56. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 5500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nut screw jack,20 t 4 ft worm gear lift jack,200 kn worm screw lift assembly,20 tonnes cubical gearbox screw jack static load capacity 200 kn, high speed torque 146 n.m, low speed torque 48 n.m. lead screw (spindle) Tr70x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
The document describes the JTC25 worm gear lift jack from Jacton Electromechanical Co. It provides specifications for the jack, including a static load capacity of 25kn, gear ratios of 1/6 for high speed and 1/24 for low speed, and various configurations for the translating screw. It lists potential applications in industries like construction, mining, and manufacturing that involve lifting, positioning, or leveling equipment.
Jtc50 worm gear screw lifter,5t screw actuator worm gear, 5 t linear worm drive jack,50 kn fabricated worm screw jack,5 ton screw worm gearbox,5 tonnes worm wheel screw drive lift,5000kg worm screw lift static load capacity 50 kn, high speed torque 31 n.m, low speed torque 9.7 n.m. lead screw (spindle) Tr40x7. high speed gear ratio 1/7, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2000 mm stroke. single screw jack or multiple screw jacks system arrangements.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Jtc5 worm gear screw lifter,small mechanical worm gear screw jacks, stainless steel worm gear screw jack,small worm geared screw jack,small industrial worm screw jacks,lifting worm gear jack, jack worm screw static load capacity 5 kn, high speed torque 2.6 n.m, low speed torque 0.8 n.m. lead screw (spindle) Tr18x4. high speed gear ratio 1/4, low speed gear ratio 1/16. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 400 mm stroke. single screw jack or multiple screw jacks system arrangements.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
UK Live Centre In Electron Beam Welding Machines Height Adjustment By Cast Iron Crank Handle Operated Small Jack Screw Lift Mechanism
UK customers new design, use our micro-miniature screw jacks with hand wheel manual operation for height adjustable live centre in electroc beam welding machines.
Upright Travelling Nut Rotating Screw Jack Model: JTC2.5-UR-300-H-VI-A-HW
1. Jtc2.5 model, lifting screw tr16x4, max. load capacity 2.5kN
2. Upright mounting, travelling nut rotating screw configuration
3. 300mm stroke with high worm gear set ratio, 1mm per turn of hand wheel
4. Plain end fitting 12mm matching top ball bearing
5. Single input worm shaft, left side
6. Accessory: 100mm diam. hand wheel, bronze travelling nut with mounting 6 holes
1. The document discusses micro-miniature screw jacks that are among the smallest in the world, with lifting forces up to 2.5kN and travel lengths up to 300mm.
2. These screw jacks are used in beverage production lines for height adjustment and can washing, improving output and reducing downtime.
3. Jacton Electromechanical Co. is a Chinese manufacturer of precision screw jacks and lifting systems, serving customers globally across various industries.
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw actuators, high lead lightweight lifting screw jack suppliers, manufacturers
Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features
1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed).
2. Lifting screw diameter 16 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations.
5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor.
7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length.
8. Lead screw end fittings include top plate, clevis end, plain end and threaded end.
9. Individually or multiple screw jack lift system arrangements are available.
Applications
Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.
The document discusses a DC 24V geared motor screw jack actuator used for hoisting water gates in agricultural industry in Malaysia. The screw jack has a 10 ton load capacity, 7 foot stroke length, and is powered by a 24V DC motor with a 1/4 gear reduction ratio. It includes protective tubing, bellows boots, and limit switches. The company, Jacton Electromechanical Co., also produces other screw jacks and gearboxes.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Jtc5 worm gear screw lifter,small mechanical worm gear screw jacks, stainless steel worm gear screw jack,small worm geared screw jack,small industrial worm screw jacks,lifting worm gear jack, jack worm screw static load capacity 5 kn, high speed torque 2.6 n.m, low speed torque 0.8 n.m. lead screw (spindle) Tr18x4. high speed gear ratio 1/4, low speed gear ratio 1/16. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 400 mm stroke. single screw jack or multiple screw jacks system arrangements.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Similar to Jtc350 worm gear screw lifter,35 ton actuator arm jackscrew,35t linear gear jack,350 kn worm gear screw lift,35000kg screw lift jack,35 tonnes worm gear jack pitch, heavy screw jacks,90 degree screw type gearbox
UK Live Centre In Electron Beam Welding Machines Height Adjustment By Cast Iron Crank Handle Operated Small Jack Screw Lift Mechanism
UK customers new design, use our micro-miniature screw jacks with hand wheel manual operation for height adjustable live centre in electroc beam welding machines.
Upright Travelling Nut Rotating Screw Jack Model: JTC2.5-UR-300-H-VI-A-HW
1. Jtc2.5 model, lifting screw tr16x4, max. load capacity 2.5kN
2. Upright mounting, travelling nut rotating screw configuration
3. 300mm stroke with high worm gear set ratio, 1mm per turn of hand wheel
4. Plain end fitting 12mm matching top ball bearing
5. Single input worm shaft, left side
6. Accessory: 100mm diam. hand wheel, bronze travelling nut with mounting 6 holes
1. The document discusses micro-miniature screw jacks that are among the smallest in the world, with lifting forces up to 2.5kN and travel lengths up to 300mm.
2. These screw jacks are used in beverage production lines for height adjustment and can washing, improving output and reducing downtime.
3. Jacton Electromechanical Co. is a Chinese manufacturer of precision screw jacks and lifting systems, serving customers globally across various industries.
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw actuators, high lead lightweight lifting screw jack suppliers, manufacturers
Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features
1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed).
2. Lifting screw diameter 16 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations.
5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor.
7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length.
8. Lead screw end fittings include top plate, clevis end, plain end and threaded end.
9. Individually or multiple screw jack lift system arrangements are available.
Applications
Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.
The document discusses a DC 24V geared motor screw jack actuator used for hoisting water gates in agricultural industry in Malaysia. The screw jack has a 10 ton load capacity, 7 foot stroke length, and is powered by a 24V DC motor with a 1/4 gear reduction ratio. It includes protective tubing, bellows boots, and limit switches. The company, Jacton Electromechanical Co., also produces other screw jacks and gearboxes.
Jacton Electromechanical Co.,Ltd produces 5 ton and 20 ton upright translating screw jacks for lifting different rotors on horizontal axis balancing machines in Russia. The balancing machine has an AC motor with variable speed that drives the machine through a belt system. It can be mounted on a concrete base or table. The screw jacks provide smooth, non-shock stopping of rotors and include features like travel stroke, worm gear ratio, and double input shafts. Other products include various screw jack models, gear boxes, hand wheels, motors, and accessories.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
Pakistan 5 ton travelling nuts rotating screw type screw jacks lifting work platform for raise container
Per screw jack lift systems parts includes 4 pcs 5t travelling nut rotating screw jacks, 2 pcs 1:1 ratio spiral bevel gear boxes, 5 pcs linking bars, 11 pcs couplings, 4 pcs steel plates, 4 pcs flange type pillow block ball bearings, 1 electric motor and 2 sets forward & reversible switches and contractors.
The linking bars, worm shafts of jacks, input & output shafts of gear boxes, output shaft of motor must be are installed and aligned. So all parts center height must be same, jt25 gear boxes are 90 mm, 1.5kw motor is 90 mm, jacks are 61.5 mm matching steel plate thickness 28.5mm, equal to 90 mm. So the main three parts center height is same with 90 mm. Easy to install them inline alignment.
The screw jack lift systems position is 1227.5×1227.5mm, included all safety factors, max. loading capacity 1500kg, travel stroke up to 2068.5 mm, after calculation, lifting screw total length 2282.5 mm. Lifting speed about 415 mm/min. Because lifting screw is very long, assured the whole lift system stable for linear motions, at the top end, extra additional 4 pcs flange type pillow block ball bearings to fix the long lifting screws, and extra additional guiding supports for the lift system.
Rotating jacks model: JTW-5T-UR-2068.5-L-I-C-N
Steel plate model: T28.5-JTW5T
Gear boxes model: JT25-1:1-1450R-1450R-I-LR-B3, JT25-1:1-1450R-1450R-I-LR-O-B3
Flange type ball bearing model: UCF204
Jaw coupling model: FL24/28
Connecting shaft model: D35L322.75, D35L651.5
Electric motor model: TC-90L-4-B3-1.5kw
2 set forward & reversible switches and contractors to control jacks lift system lifting up and down.
The document discusses a theatre lifting stage jack system for a theatre in France. It includes specifications for a lifting platform that is 15000x10000mm carrying a total load of 2400kN. The system would include 6 screw jacks each with a load capacity of 400kN and 628mm of travel, along with 3 miter gearboxes to connect the screw jacks. An electric motor with a gear reducer is also specified to drive the screw jack system at a speed of 37.5mm/min. Parts for the system like screw jacks, couplings, linking bars, bearings, motors and gearboxes are also referenced.
Denmark spider mould installation 10 ton worm gear jack lift pulling manual operation.
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.
The document provides information on the JT-20T screw jack from Jacton Electromechanical Co. including specifications, configurations, applications, and a selection guide. Key details include:
- The JT-20T has a static lifting force of 20,000 kg and dynamic lifting force of 8,400 kg.
- It is available in upright, inverted, rotating, or keyed screw configurations.
- Common applications include material handling, construction, manufacturing, and metallurgy.
- A selection guide assists customers in choosing the appropriate screw jack based on their load and operational requirements.
Similar to Jtc350 worm gear screw lifter,35 ton actuator arm jackscrew,35t linear gear jack,350 kn worm gear screw lift,35000kg screw lift jack,35 tonnes worm gear jack pitch, heavy screw jacks,90 degree screw type gearbox (20)
The document describes the JTW-Series machine screw jacks. Key points:
- The jacks use heat-treated steel and bronze gears to translate rotation into linear movement via an acme thread lifting screw. Ball bearings and seals support components.
- Configurations include types that translate, rotate the lifting nut, include anti-rotation/backlash features, and different lifting screw ends. Capacities range from 0.5 to 100 tons.
- JTW jacks are self-locking, precisely position loads, and do not require additional braking. They can be driven manually or by motor in various mounting positions.
- Applications include metalworking, mining, construction, and other industries
This document provides specifications for the JTV-series miter gearbox. The gearbox has a cubic, machined housing with average efficiencies of 95-98%. It can operate in both directions smoothly with low noise and vibration. Spiral bevel gears are made of hardened alloy steel and precision processed to provide rigidity and high precision transmission. The gearbox is available in various configurations with 1-4 shafts and maximum torques ranging from 19Nm to 1841Nm.
Jacton Industry Co., Ltd is a company that provides lifting systems solutions including screw jacks, miter gearboxes, and lifting systems. They can be contacted via their phone number, Skype, email, or website for inquiries about custom screw jacks, custom acme screws, or their JT-Series miter gearbox product line.
The JT-Series Acme Screw Jacks incorporate heat-treated steel and bronze gears to translate or rotate an acme threaded lifting screw, supporting loads without backdriving. They are available in sizes from 0.5 to 100 tons and various configurations, and can lift at speeds up to 3 m/min. JT-Series jacks are commonly used for controlled lifting, lowering, pushing and pulling in applications like steel mill roller adjustment. They are generally maintenance-free and accessories allow for electric, hand wheel, or combined motor operation.
The document describes the JTC-Series Cubic Screw Jack. It has a worm gear driven trapezoidal lead screw that incorporates a heat-treated steel worm and bronze worm gear. It uses ball bearings and seals to support components. The jack housing is made of ductile iron and comes in various configurations for different applications. It can provide lifting forces from 2.5 to 500 kN and linear speeds up to 1.5 m/min. Accessories include motors, wheels, and switches. It is used for applications requiring controlled lifting/lowering such as conveyors and stages.
The document describes JTB-Series Ball Screw Jacks, which use ball screws and ball nuts instead of machine screws to reduce torque requirements. They have worm gears that drive bronze gear sets and ball nuts to translate or rotate lifting ball screws. The ball screw design allows for smoother and more efficient lifting than machine screw jacks. JTB ball screw jacks are used where controlled lifting is required and can be installed as single units or in lifting systems. They come in various configurations for different applications.
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
The document describes 3 ton worm gear screw jacks lifting devices that are 300mm in travel stroke and have a maximum load capacity of 3 tons. The screw jacks are hand wheel operated and are being offered for use in NC precision slitting production lines and automatic slitter machines in Australia. The screw jacks have a high gear ratio of 1/6 and include additional protective piping.
The document advertises lightweight micro-miniature screw jacks from 2.5kn to 10kn lifting force for aluminum can production lines in the UK. It provides details on 4 screw jack models ranging from 2.5kn to 10kn lifting force that are inverted type, have a traveling screw configuration, 100mm lift height, and protective tubing. The screw jacks and other products like gear boxes, couplings, motors, and accessories are suitable for applications that require height adjustment and lifting on conveyor lines.
Jacton Electromechanical Co. produces precision screw jacks and gear lifts for precision straighteners used in the USA. They offer inverted translating worm gear screw jacks in various tonnage ratings from 1 to 10 tons with stroke lengths from 80 to 300mm. These screw jacks feature customized threaded ends, double input shaft worms, and protective tubes to prevent rust. Jacton also produces other screw jack and gear products for industrial machinery.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
The document discusses screw jack lifting systems for scissor lift tables. It describes how ball screw or acme screw jack lifting systems can provide self-locking, precise positioning, uniform lifting speed, synchronization, easy installation and maintenance for scissor lifts. It then provides details about a specific order from a Singapore customer for a screw jack scissor lift table with two screw jacks driven by a 3-phase motor.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.
The document discusses motorized drive system jackscrews that are used for earth station antenna elevation and azimuth positioning. The jackscrews provide reliable, precise and smooth movement withstanding weather conditions. Key components include self-locking worm gear screw jacks coupled to helical gear motors, limit switches, protective covers, and swivel plates for pivoting antenna positioning. The company provides various jackscrew models and related parts to suit different applications.
Synchronization two jacks lift table, synchronizing four jacks lift table, synchronous lifting six jacks lift table suppliers.
Two Worm Gear Screw Jack Lift Systems Efficiency 95%
Inline Configuration Screw jack lift systems with two worm gear screw jacks, two flexible couplings, one linking bar and one motor. T Configuration Screw jack lift systems with two worm gear screw jacks, five flexible couplings, two linking bars, one right angle bevel gear box three-way and one motor.
Three Worm Gear Screw Jack Lift Systems Efficiency 90%
Inline Configuration Screw jack lift systems with three worm gear screw jacks, five flexible couplings, two linking bar and one motor. T Configuration Screw jack lift systems with three worm gear screw jacks, nine flexible couplings, four linking bars, two right angle bevel gear boxes three-way and one motor.
Four Worm Gear Screw Jack Lift Systems Efficiency 85%
H Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 13 flexible couplings, six linking bars and one motor. U Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 11 flexible couplings, four linking bars and one motor.
Six Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 17 flexible couplings, eight linking bars and one motor. 2H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes four-way, 17 flexible couplings, eight linking bars and one motor. U Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 15 flexible couplings, six linking bars and one motor.
Eight Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with eight worm gear screw jacks, three right angle bevel gear boxes three-way, 21 flexible couplings, 10 linking bars and one motor. 2H Configuration Six Screw jack lift systems with eight worm gear screw jacks, seven right angle bevel gear boxes three-way, 29 flexible couplings, 14 linking bars and one motor.
Top 10 Free Accounting and Bookkeeping Apps for Small BusinessesYourLegal Accounting
Maintaining a proper record of your money is important for any business whether it is small or large. It helps you stay one step ahead in the financial race and be aware of your earnings and any tax obligations.
However, managing finances without an entire accounting staff can be challenging for small businesses.
Accounting apps can help with that! They resemble your private money manager.
They organize all of your transactions automatically as soon as you link them to your corporate bank account. Additionally, they are compatible with your phone, allowing you to monitor your finances from anywhere. Cool, right?
Thus, we’ll be looking at several fantastic accounting apps in this blog that will help you develop your business and save time.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Call8328958814 satta matka Kalyan result satta guessing➑➌➋➑➒➎➑➑➊➍
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Best Competitive Marble Pricing in Dubai - ☎ 9928909666Stone Art Hub
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Jtc350 worm gear screw lifter,35 ton actuator arm jackscrew,35t linear gear jack,350 kn worm gear screw lift,35000kg screw lift jack,35 tonnes worm gear jack pitch, heavy screw jacks,90 degree screw type gearbox
1. Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC Series Worm Gear Lift Jack
JTC350 WORM GEAR LIFT JACK DESCRIPTIONS
static load capacity 350 kn, high speed torque 325 n.m, low speed torque 107 n.m. lead screw (spindle)
Tr100x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw,
rotating screw and keyed screw configurations. precision positioning, self locking lead screw which
support the loads and hold position without brake mechamism. single phase or three phases electric
motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end,
forked head and top plate (flange type) for lead screw (spindle) end types. customized various length
stroke, under tension load, maximum 4500 mm stroke. single screw jack or multiple screw jacks system
arrangements.
2. Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC Series Worm Gear Lift Jack
JTC350 WORM GEAR LIFT JACK TECHNICAL PARAMETER TABLE
JTC350 WORM GEAR LIFT JACK DIMENSIONS AND DRAWINGS
3. Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC Series Worm Gear Lift Jack
JTC350 WORM GEAR LIFT JACK APPLICATIONS
Application in spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, raising sluice
gate, screw scissor lift table, synchronized lifting system, food processing oven lifts system, feeder leveler,
roller adjustment, tunnel ventilation damper adjustment, postform roller elevation, car lifting trolley, cnc
steel leveling machine, blow molding machine, floating glass leveler, curing oven lifts, mobile container
lifting gear, moveable swimming pool lifting floor, bolted tank, steel shuttering concrete beams adjustment,
caterpillar laminating machine, roller Laminating machine, complete mineral wool processing machinery,
sandwich panel handling machinery, solar panel tracking system, satellite dish antenna azimuth and
elevation, sluice gate lifting mechanism, railway maintenance lifting jack, coil sheet slitter and metallurgy
industry, mining industry, chemical industry, construction industry, irrigation industry.
JTC350 WORM GEAR LIFT JACK SELECTION GUIDE
JTC - 350 - UR - 3500 - H - II - C - HW
1 2 3 4 5 6 7 8
1. Jack Series
JT: "Jacton" brand screw jack
C series cubic screw jack
2. Load Capacity
350: lifting force 350kN, please check above JTC350 worm gear lift jack technical parameter table.
3. Screw Configuration & Mounting Orientation
US: Upright translating screw UK: Upright keyed screw UR: Upright rotating screw
4. Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC Series Worm Gear Lift Jack
IS: Inverted translating screw IK: Inverted keyed screw IR: Inverted rotating screw
4. Travel Stroke
3500, means travel stroke 3500mm.
We processing screw jack spindle length following customers requirements.
JTC350 worm gear lift jack maximum stroke 4500 mm.
350. Gear Ratio
JTC350 worm gear lift jack gear ratios include 1/10, 1/40.
H: High gear ratio 1/10, 1mm stroke per full turn of input worm shaft.
L: Low gear ratio 1/40, 0.25mm stroke per full turn of input worm shaft.
6. Lifting Screw Top Ends Types
JTC350 worm gear lift jack standard lifting screw top ends types include top plate, clevis end, threaded
end, forked head and plain end. Also processing lifting screw top ends following customers design
drawings.
I: Top Plate II: Clevis End
III: Threaded End IV: Forked Head
VI: Plain End
5. Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
JTC Series Worm Gear Lift Jack
7. Worm Shaft Input Types
A: left side worm shaft input.
B: right side worm shaft input.
C: double worm shaft input.
M1: left side motor flange direct input.
M2: right side motor flange direct input.
M3: left side motor flange direct input, right side worm shaft input.
M4: right side motor flange direct input, left side worm shaft input.
8. Accessories
N: no accessory PP: protective pipe BB: bellows boot
BG: miter gearbox HW: hand wheel EM: electric motor
GR: gear reducer LS: limit switches SN: stop nut
DC: digital counter SP: swivel plate SM: swivel mounting base
PB: pillow block bearing FC: flexible coupling CS: connecting shaft