The technical manual provides instructions for servicing a 990 Compact Utility Tractor. It contains sections on specific systems organized by contents, specifications, component location, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. Safety is emphasized, including proper protective equipment, safe work practices, and handling of fluids and high pressure lines.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
Clark gpx 30 forklift service repair manualfjjskekdmme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting transmission connections, draining fluid, removing mounting bolts and lowering the transmission from the forklift with an engine lift. Installation involves mounting the torque converter to the engine flywheel through an access port and raising the transmission into place on the forklift.
John deere xuv 825i gator utility vehicle service repair manual (tm107119)udjjjksmemmmd
This technical manual provides instructions for servicing the John Deere XUV Gator 825i utility vehicle. It begins with safety information, explaining proper handling of batteries, fluids, and other hazards. The manual is organized into sections covering specifications, identification, tools, component locations, schematics, theory of operation, diagnosis, testing, repair and other relevant topics. Technicians are advised to follow recommended safety practices and precautions when working on the vehicle.
John deere ts and th 6x4 gator utility vehicle service repair manualfujskekfmsme
The document is a technical manual for John Deere Gator utility vehicles. It provides an overview of the manual's organization and contents. The manual is divided into specific sections covering topics like specifications, component locations, theory of operation, diagnostics, repair procedures, and safety information. It notes that the manual is intended for experienced technicians and contains all necessary information for working on particular vehicle systems.
John deere 300 cs chainsaws service repair manualfjjskekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It contains sections on specifications, safety practices, and repair instructions. The manual is organized with headings and symbols to guide technicians through diagnostic and repair procedures. It emphasizes safety precautions for handling fuels, chemicals, rotating blades, and other hazards to prevent injury.
Mitsubishi fd80 n forklift trucks service repair manual snf32c 10011-upjksjdmd
This service manual provides maintenance and repair information for Mitsubishi forklift truck models FD80N and FD90N powered by a Mitsubishi 6M60-TL diesel engine. It includes specifications, diagrams, removal and installation instructions, and troubleshooting guides for the cooling, electrical, powertrain, transmission, axles, brakes, steering, hydraulic, mast and other systems. Safety precautions are outlined and the manual is organized for easy reference by system.
John deere 2000 & 540 rpm pto service repair manualfjkskmmdmme
This technical manual provides specifications and lubrication information for various John Deere lawn and grounds equipment including rotary mowers, snowblowers, post hole diggers, rotary tillers, and rotary brooms. It lists recommended lubricants for gear cases, transmissions/hydraulics, and PTO drives for equipment used in North America and Europe. It also provides brief descriptions and specifications for different types of rotary mowers.
John deere 790 compact utility tractor service repair manualfjjskekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and supply it to the fuel filter. The injection pump then sends the filtered fuel at high pressure to the injectors. Excess fuel and fuel leaked past the injectors is returned to the tank. Air is drawn into the air cleaner through an inlet hose and is filtered before entering the intake manifold. The injection pump meters and times the delivery of fuel to the injectors based on engine speed and load.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
Clark gpx 30 forklift service repair manualfjjskekdmme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting transmission connections, draining fluid, removing mounting bolts and lowering the transmission from the forklift with an engine lift. Installation involves mounting the torque converter to the engine flywheel through an access port and raising the transmission into place on the forklift.
John deere xuv 825i gator utility vehicle service repair manual (tm107119)udjjjksmemmmd
This technical manual provides instructions for servicing the John Deere XUV Gator 825i utility vehicle. It begins with safety information, explaining proper handling of batteries, fluids, and other hazards. The manual is organized into sections covering specifications, identification, tools, component locations, schematics, theory of operation, diagnosis, testing, repair and other relevant topics. Technicians are advised to follow recommended safety practices and precautions when working on the vehicle.
John deere ts and th 6x4 gator utility vehicle service repair manualfujskekfmsme
The document is a technical manual for John Deere Gator utility vehicles. It provides an overview of the manual's organization and contents. The manual is divided into specific sections covering topics like specifications, component locations, theory of operation, diagnostics, repair procedures, and safety information. It notes that the manual is intended for experienced technicians and contains all necessary information for working on particular vehicle systems.
John deere 300 cs chainsaws service repair manualfjjskekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It contains sections on specifications, safety practices, and repair instructions. The manual is organized with headings and symbols to guide technicians through diagnostic and repair procedures. It emphasizes safety precautions for handling fuels, chemicals, rotating blades, and other hazards to prevent injury.
Mitsubishi fd80 n forklift trucks service repair manual snf32c 10011-upjksjdmd
This service manual provides maintenance and repair information for Mitsubishi forklift truck models FD80N and FD90N powered by a Mitsubishi 6M60-TL diesel engine. It includes specifications, diagrams, removal and installation instructions, and troubleshooting guides for the cooling, electrical, powertrain, transmission, axles, brakes, steering, hydraulic, mast and other systems. Safety precautions are outlined and the manual is organized for easy reference by system.
John deere 2000 & 540 rpm pto service repair manualfjkskmmdmme
This technical manual provides specifications and lubrication information for various John Deere lawn and grounds equipment including rotary mowers, snowblowers, post hole diggers, rotary tillers, and rotary brooms. It lists recommended lubricants for gear cases, transmissions/hydraulics, and PTO drives for equipment used in North America and Europe. It also provides brief descriptions and specifications for different types of rotary mowers.
John deere 790 compact utility tractor service repair manualfjjskekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and supply it to the fuel filter. The injection pump then sends the filtered fuel at high pressure to the injectors. Excess fuel and fuel leaked past the injectors is returned to the tank. Air is drawn into the air cleaner through an inlet hose and is filtered before entering the intake manifold. The injection pump meters and times the delivery of fuel to the injectors based on engine speed and load.
John deere 790 compact utility tractor service repair manualfujskekfmsme
This technical manual provides information for repairing John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It covers engine repair, electrical systems, power trains, steering/brakes, hydraulics, and testing/diagnostics. Repair sections describe how to repair components, while diagnostic sections help identify routine failures. The manual is intended for experienced technicians and includes safety warnings, specifications, repair instructions, and diagrams.
John deere pro gator hd200 service repair manualufjkskemfseol
This document provides specifications and reference information for fasteners and fittings used on John Deere equipment. It includes:
- Metric and inch fastener torque values for different sized bolts, with specifications for lubricated and dry conditions.
- Recommended torque values for O-ring face seal and boss style fittings in both metric and inch sizes.
- Oil and lubricant specifications for hydraulic systems, including hydrostatic transmission oil, anti-corrosion grease, and notes on synthetic lubricants.
- Instructions on proper lubricant storage and avoiding mixing different types of lubricants.
- Description of where to find the machine identification number and serial number locations.
Clark np15 forklift service repair manualfjjskekdmme
This document is a service manual intended for CLARK dealers providing maintenance and repair information for CLARK electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking/hoisting, mast system, specifications, troubleshooting, and operating instructions. The introduction states that it does not contain parts or operation information and to contact CLARK for that. It provides warnings to read all safety information before operating and only allow trained operators.
This is the Highly Detailed factory service repair manual for the2007 IVECO DAILY 4, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 IVECO DAILY 4 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
Product Code
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 IVECO DAILY 4 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
MITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Manual SN:F25C-50001-UPkjsekmd fhsemmd
This is the Highly Detailed factory service repair manual for theMITSUBISHI FGE15N FORKLIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis and Mast: Foreword
Chassis and Mast: General Information
Chassis and Mast: Cooling System
Chassis and Mast: Electrical System
Chassis and Mast: Electrical Schematics
Chassis and Mast: Controllers
Chassis and Mast: Power Train
Chassis and Mast: Clutches
Chassis and Mast: Manual Transmission
Chassis and Mast: Power shift Transmission
Chassis and Mast: Front Axle and Reduction Differential
Chassis and Mast: Rear Axle
Chassis and Mast: Brake System
Chassis and Mast: Steering System
Chassis and Mast: Hydraulic System
Chassis and Mast: Mast and Forks
Chassis and Mast: Service Data
Engine: K15, K21, K25 Gasoline: Foreword
Engine: K15, K21, K25 Gasoline: General Information
Engine: K15, K21, K25 Gasoline: Maintenance
Engine: K15, K21, K25 Gasoline: Tune up
Engine: K15, K21, K25 Gasoline: Mechanical
Engine: K15, K21, K25 Gasoline: Control
Engine: K15, K21, K25 Gasoline: Lubrication and Cooling
Engine: K15, K21, K25 Gasoline: Fuel
Engine: K15, K21, K25 Gasoline: Electrical
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case 752 ex vibratory compactor service repair manualfusekfksemwe
The document is a service manual that provides instructions for maintaining and repairing the components of a 752EX vibratory compactor, including the engine, hydrostatic drive, hydraulic systems, frames and ballasting, steering, electrical systems, and platform/cab. It contains detailed part numbers, diagrams, torque specifications, and step-by-step instructions for removing and installing various parts. Safety information is also provided to ensure the proper and safe operation of the compactor.
1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Manualjdnnnd efjmdd
This is the Highly Detailed factory service repair manual for the1988 LAND ROVER RANGE ROVER CLASSIC , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
John deere sabre m10 21 inch walk-behind mower service repair manualufjkskemfseol
This technical manual provides instructions for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized into sections covering various systems. Safety precautions are outlined, and specifications for the mowers such as torque values, lubricants, and fuel are provided.
John deere chainsaws cs52 service repair manualufjkskemfseol
This technical manual provides information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The first section provides the manual's table of contents and outlines that it contains specifications, identification numbers, tools/materials, schematics, theory of operation, diagnosis/testing, and repair information. The manual is intended for experienced technicians and contains model-specific sections.
Komatsu sk815 5 n skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This shop manual provides service information for Komatsu SK815-5N and SK815-5NA skid steer loaders. It contains sections on general information, structure and maintenance, standard values, testing and adjusting, troubleshooting, disassembly and assembly, and diagrams. The manual aims to improve repair quality by accurately explaining the product and correct repair procedures. It is divided into sections and subgroups to help technicians efficiently service the loaders. Komatsu will provide updates to distributors to keep the information current.
John deere 4200 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides specifications, operation instructions, troubleshooting information, and repair procedures for John Deere 4200, 4300, and 4400 compact utility tractor diesel engines. The manual is organized into sections covering specifications, theory of operation for fuel, cooling, and lubrication systems, troubleshooting charts, tests and adjustments for components like valves and injection pumps, and repair procedures for engine overhaul. Safety information is provided throughout, including hazards from high pressure fluids, battery explosions, and working in confined spaces.
Case ih puma 165 tractor service repair manualfkksejfjskemm
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
John deere 990 compact utility tractor service repair manualfjsjekdmmeme
The technical manual provides specifications and service information for the 990 Compact Utility Tractor. It includes sections on general vehicle specifications, the diesel engine, electrical system, fuel system, drive train, rear PTO, hydraulic system, and capacities. The manual instructs technicians on safety procedures, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. It also provides tables listing torque specifications for fasteners in inch, metric, and JIS systems. Additional sections specify requirements for diesel fuel and storage procedures.
John deere 355 d lawn garden tractor service repair manualfjjskedmmemm
This technical manual provides instructions for servicing a John Deere 355D Lawn and Garden Tractor. It is organized into multiple sections covering different systems of the tractor, such as power train, brakes, attachments, and more. Each section includes specifications, schematics, troubleshooting charts, repair instructions, and other information relevant to servicing that system. The manual aims to provide technicians with all the information needed to service the tractor and requests feedback to improve future manuals.
John deere 355 d lawn garden tractor service repair manualfjskedsxmmem
This technical manual provides specifications and information for key components and systems of the John Deere 355D Lawn and Garden Tractor, including the engine, fuel system, electrical system, power train, steering, brakes, hydraulics, implement lift, mower attachments, dimensions, wheels/tires, and torque specifications for fasteners. The manual is organized into sections for each major system to keep related information together.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of heavy components, safe handling of batteries and high-pressure fluids, and working in a well-ventilated area.
John deere mid mount z-trak m665 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides essential information for repairing and servicing the product safely and effectively.
John deere mid mount z-trak m653 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides service information for the John Deere M653/655/665 Mid-Mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides maintenance and repair instructions to help ensure the machine is functioning properly, especially important safety systems. It notes that engine exhaust can cause illness or death and proper ventilation and protective equipment should be used.
John deere mid mount z-trak m653 mower service repair manual (tm1778)fjjsekmmm
This technical manual provides service information for the John Deere M653/655/665 Mid-Mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides maintenance and repair instructions to help ensure the machine is functioning properly, especially important safety systems. It notes the various groups and sections that may be included depending on the specific system being covered.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides information for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections on general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual instructs technicians to check that the machine does not move when the control levers are in the neutral position with the engine running, and provides procedures for bleeding air from the hydraulic system and adjusting the control linkage if movement is detected.
John deere mid mount z-trak m665 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of heavy components, safe handling of batteries and high-pressure fluids, and working in a well-ventilated area.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of equipment, safe handling of batteries and fluids, and protective equipment for technicians.
John deere 790 compact utility tractor service repair manualfujskekfmsme
This technical manual provides information for repairing John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It covers engine repair, electrical systems, power trains, steering/brakes, hydraulics, and testing/diagnostics. Repair sections describe how to repair components, while diagnostic sections help identify routine failures. The manual is intended for experienced technicians and includes safety warnings, specifications, repair instructions, and diagrams.
John deere pro gator hd200 service repair manualufjkskemfseol
This document provides specifications and reference information for fasteners and fittings used on John Deere equipment. It includes:
- Metric and inch fastener torque values for different sized bolts, with specifications for lubricated and dry conditions.
- Recommended torque values for O-ring face seal and boss style fittings in both metric and inch sizes.
- Oil and lubricant specifications for hydraulic systems, including hydrostatic transmission oil, anti-corrosion grease, and notes on synthetic lubricants.
- Instructions on proper lubricant storage and avoiding mixing different types of lubricants.
- Description of where to find the machine identification number and serial number locations.
Clark np15 forklift service repair manualfjjskekdmme
This document is a service manual intended for CLARK dealers providing maintenance and repair information for CLARK electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking/hoisting, mast system, specifications, troubleshooting, and operating instructions. The introduction states that it does not contain parts or operation information and to contact CLARK for that. It provides warnings to read all safety information before operating and only allow trained operators.
This is the Highly Detailed factory service repair manual for the2007 IVECO DAILY 4, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 IVECO DAILY 4 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
Product Code
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 IVECO DAILY 4 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
MITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Manual SN:F25C-50001-UPkjsekmd fhsemmd
This is the Highly Detailed factory service repair manual for theMITSUBISHI FGE15N FORKLIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis and Mast: Foreword
Chassis and Mast: General Information
Chassis and Mast: Cooling System
Chassis and Mast: Electrical System
Chassis and Mast: Electrical Schematics
Chassis and Mast: Controllers
Chassis and Mast: Power Train
Chassis and Mast: Clutches
Chassis and Mast: Manual Transmission
Chassis and Mast: Power shift Transmission
Chassis and Mast: Front Axle and Reduction Differential
Chassis and Mast: Rear Axle
Chassis and Mast: Brake System
Chassis and Mast: Steering System
Chassis and Mast: Hydraulic System
Chassis and Mast: Mast and Forks
Chassis and Mast: Service Data
Engine: K15, K21, K25 Gasoline: Foreword
Engine: K15, K21, K25 Gasoline: General Information
Engine: K15, K21, K25 Gasoline: Maintenance
Engine: K15, K21, K25 Gasoline: Tune up
Engine: K15, K21, K25 Gasoline: Mechanical
Engine: K15, K21, K25 Gasoline: Control
Engine: K15, K21, K25 Gasoline: Lubrication and Cooling
Engine: K15, K21, K25 Gasoline: Fuel
Engine: K15, K21, K25 Gasoline: Electrical
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMITSUBISHI FGE15N FORKLIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case 752 ex vibratory compactor service repair manualfusekfksemwe
The document is a service manual that provides instructions for maintaining and repairing the components of a 752EX vibratory compactor, including the engine, hydrostatic drive, hydraulic systems, frames and ballasting, steering, electrical systems, and platform/cab. It contains detailed part numbers, diagrams, torque specifications, and step-by-step instructions for removing and installing various parts. Safety information is also provided to ensure the proper and safe operation of the compactor.
1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Manualjdnnnd efjmdd
This is the Highly Detailed factory service repair manual for the1988 LAND ROVER RANGE ROVER CLASSIC , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1988 LAND ROVER RANGE ROVER CLASSIC Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
John deere sabre m10 21 inch walk-behind mower service repair manualufjkskemfseol
This technical manual provides instructions for servicing John Deere 21-inch walk-behind mowers models M10, M21, and M23. The manual is organized into sections covering various systems. Safety precautions are outlined, and specifications for the mowers such as torque values, lubricants, and fuel are provided.
John deere chainsaws cs52 service repair manualufjkskemfseol
This technical manual provides information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The first section provides the manual's table of contents and outlines that it contains specifications, identification numbers, tools/materials, schematics, theory of operation, diagnosis/testing, and repair information. The manual is intended for experienced technicians and contains model-specific sections.
Komatsu sk815 5 n skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This shop manual provides service information for Komatsu SK815-5N and SK815-5NA skid steer loaders. It contains sections on general information, structure and maintenance, standard values, testing and adjusting, troubleshooting, disassembly and assembly, and diagrams. The manual aims to improve repair quality by accurately explaining the product and correct repair procedures. It is divided into sections and subgroups to help technicians efficiently service the loaders. Komatsu will provide updates to distributors to keep the information current.
John deere 4200 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides specifications, operation instructions, troubleshooting information, and repair procedures for John Deere 4200, 4300, and 4400 compact utility tractor diesel engines. The manual is organized into sections covering specifications, theory of operation for fuel, cooling, and lubrication systems, troubleshooting charts, tests and adjustments for components like valves and injection pumps, and repair procedures for engine overhaul. Safety information is provided throughout, including hazards from high pressure fluids, battery explosions, and working in confined spaces.
Case ih puma 165 tractor service repair manualfkksejfjskemm
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
John deere 990 compact utility tractor service repair manualfjsjekdmmeme
The technical manual provides specifications and service information for the 990 Compact Utility Tractor. It includes sections on general vehicle specifications, the diesel engine, electrical system, fuel system, drive train, rear PTO, hydraulic system, and capacities. The manual instructs technicians on safety procedures, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests and adjustments, and repair. It also provides tables listing torque specifications for fasteners in inch, metric, and JIS systems. Additional sections specify requirements for diesel fuel and storage procedures.
John deere 355 d lawn garden tractor service repair manualfjjskedmmemm
This technical manual provides instructions for servicing a John Deere 355D Lawn and Garden Tractor. It is organized into multiple sections covering different systems of the tractor, such as power train, brakes, attachments, and more. Each section includes specifications, schematics, troubleshooting charts, repair instructions, and other information relevant to servicing that system. The manual aims to provide technicians with all the information needed to service the tractor and requests feedback to improve future manuals.
John deere 355 d lawn garden tractor service repair manualfjskedsxmmem
This technical manual provides specifications and information for key components and systems of the John Deere 355D Lawn and Garden Tractor, including the engine, fuel system, electrical system, power train, steering, brakes, hydraulics, implement lift, mower attachments, dimensions, wheels/tires, and torque specifications for fasteners. The manual is organized into sections for each major system to keep related information together.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of heavy components, safe handling of batteries and high-pressure fluids, and working in a well-ventilated area.
John deere mid mount z-trak m665 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides essential information for repairing and servicing the product safely and effectively.
John deere mid mount z-trak m653 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides service information for the John Deere M653/655/665 Mid-Mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides maintenance and repair instructions to help ensure the machine is functioning properly, especially important safety systems. It notes that engine exhaust can cause illness or death and proper ventilation and protective equipment should be used.
John deere mid mount z-trak m653 mower service repair manual (tm1778)fjjsekmmm
This technical manual provides service information for the John Deere M653/655/665 Mid-Mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual is intended for experienced technicians and provides maintenance and repair instructions to help ensure the machine is functioning properly, especially important safety systems. It notes the various groups and sections that may be included depending on the specific system being covered.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides information for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections on general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, repair procedures, and safety information. The manual instructs technicians to check that the machine does not move when the control levers are in the neutral position with the engine running, and provides procedures for bleeding air from the hydraulic system and adjusting the control linkage if movement is detected.
John deere mid mount z-trak m665 mower service repair manual (tm1778)fiksfejjsekkmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of heavy components, safe handling of batteries and high-pressure fluids, and working in a well-ventilated area.
John deere mid mount z-trak m655 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of equipment, safe handling of batteries and fluids, and protective equipment for technicians.
John deere mid mount z-trak m653 mower service repair manual (tm1778)fjkskekxsdcmdmme
This technical manual provides instructions for servicing a John Deere M653/655/665 mid-mount ZTRAK. It contains sections covering general diagnostic information, specifications, component locations, wiring diagrams, troubleshooting charts, and repair procedures. Safety precautions are outlined, including proper lifting of heavy components, safe handling of batteries and high-pressure fluids, and cleaning work areas.
Similar to John deere 990 compact utility tractor service repair manual (11)
This document is the service manual for the Clark SM-560 lift truck. It contains sections on safety, maintenance procedures, inspections, repairs, and specifications. The manual emphasizes the importance of regularly maintaining the lift truck according to the manufacturer's recommendations to ensure safe operation and maximum performance of the vehicle.
Clark tmg 13 20 x forklift service repair manualdidkkmmdm
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark tmg 12 25 forklift service repair manualdidkkmmdm
This document is a service manual for Clark forklifts that contains information on safety, maintenance, repairs, specifications and other technical details. It includes sections on topics such as batteries, motors, brakes, hydraulics, steering and other systems. The manual uses a standardized grouping and numbering system to organize content and make specific information easy to locate. Safety precautions and proper maintenance are emphasized throughout.
This document provides information about periodic maintenance and planned maintenance for HWX/PWX trucks, including:
1. Maintenance schedules and intervals that should be followed based on operating conditions.
2. Details of a planned maintenance program that includes inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form to document inspections and needed repairs.
This service manual provides maintenance and repair information for PWT tow tractors and PWC center controlled pallet trucks, including specifications for electrical systems, dimensions, capacities, component details, and a list of required tools. Standard specifications are provided for models of both the PWT and PWC, including motor type, gear ratios, speeds, dimensions, weight, battery options, tire types, and performance capacities. The document also includes sections on record keeping, torque charts, and maintenance recommendations to assist technicians in properly servicing the equipment.
Clark pwd 36 forklift service repair manualdidkkmmdm
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark pwd 30 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should note any issues found on a check sheet using codes to indicate the urgency of repairs needed, from minor adjustments to replacements requiring a shop visit. Visual inspections and keeping electrical components jewelry-free are emphasized for safety.
Clark pwd 25 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should carefully inspect all systems and note any issues found on the maintenance check sheet using a coding system to indicate the urgency of repairs needed. Safety is emphasized throughout, including wearing protective equipment and disabling trucks before working on electrical components.
The document is a service manual that provides general information and specifications for Clark PWT tow tractors and PWC center controlled pallet trucks, including details on their electrical systems, dimensions, capacities, component specifications, and maintenance requirements. It also includes a table of contents listing the sections covered in the manual, and notes that the power sections of the PWT and PWC are the same despite their different applications.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks in safe operating condition, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes following maintenance procedures and safety practices to avoid hazards that could result in injury or death. It also provides specifications for electrical systems, fluids, tires, and other components.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks safely operating, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes safety practices for maintenance, such as raising the wheels, disconnecting power, and using blocks or stands before working under a truck.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks in safe operating condition, including inspections, operational checks, cleaning, lubrication, and adjustments. Safety practices for maintenance are also listed, such as disconnecting power sources before working on electrical systems, and using lifting equipment rated for heavy components.
Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj000...didkkmmdm
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators powered by a C9.3 engine. It lists required tools and parts and includes diagrams illustrating the 27 steps to assemble the travel motor. Removal instructions are also provided in 13 steps, including draining fluids and marking components for proper reinstallation.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves, and more. Detailed illustrations accompany each step to show how to properly remove and disassemble the parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F L & 336F LN Excavator. It outlines 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Various tools are required including a driver group, retaining ring pliers, bearing puller group and lifting eye assembly to safely remove parts and release spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix kft) service repair manual (kft000...didkkmmdm
The document provides instructions for disassembling a 336F excavator travel motor. It describes 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and bolts. Various tools are required including a driver group, retaining ring pliers, bearing puller group and eyebolt for lifting components. Safety precautions are provided to release spring forces and contain fluids.
Caterpillar cat 336 f ln excavator (prefix dkf) service repair manual (dkf000...didkkmmdm
This document provides instructions for disassembling and assembling the travel motor on Caterpillar 336F L and 336F LN excavator models. It outlines 27 steps to disassemble the travel motor by removing components like the head, springs, plates, seals and bearings. It then describes 17 steps to reassemble the travel motor by installing these same components in the reverse order. Tools required are also listed.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
4. SAFETY
1 - 2 7/27/00
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol on your machine or in this manual, be alert to
the potential for personal injury.
Follow recommended precautions and safe servicing
practices.
Understand Signal Words
A signal word—DANGER, WARNING, or CAUTION—
is used with the safety-alert symbol. DANGER
identifies the most serious hazards.
DANGER or WARNING safety signs are located near
specific hazards. General precautions are listed on
CAUTION safety signs. CAUTION also calls attention
to safety messages in this manual.
REPLACE SAFETY SIGNS
Replace missing or damaged safety signs. See the
machine operator’s manual for correct safety sign
placement.
HANDLE FLUIDS SAFELY-AVOID
FIRES
Be Prepared For Emergencies
When you work around fuel, do not smoke or work near
heaters or other fire hazards.
Store flammable fluids away from fire hazards. Do not
incinerate or puncture pressurized containers.
Make sure machine is clean of trash, grease, and
debris.
Do not store oily rags; they can ignite and burn
spontaneously.
Be prepared if a fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance
service, hospital, and fire department near your
telephone.
5. SAFETY
7/27/00 1 - 3
USE CARE IN HANDLING AND
SERVICING BATTERIES
Prevent Battery Explosions
• Keep sparks, lighted matches, and open flame
away from the top of battery. Battery gas can
explode.
• Never check battery charge by placing a metal
object across the posts. Use a volt-meter or
hydrometer.
• Do not charge a frozen battery; it may explode.
Warm battery to 16°C (60°F).
Prevent Acid Burns
• Sulfuric acid in battery electrolyte is poisonous. It is
strong enough to burn skin, eat holes in clothing,
and cause blindness if splashed into eyes.
• Avoid acid burns by:
1. Filling batteries in a well-ventilated area.
2. Wearing eye protection and rubber gloves.
3. Avoiding breathing fumes when electrolyte is
added.
4. Avoiding spilling or dripping electrolyte.
5. Use proper jump start procedure.
• If you spill acid on yourself:
1. Flush your skin with water.
2. Apply baking soda or lime to help neutralize the
acid.
3. Flush your eyes with water for 10_15 minutes.
4. Get medical attention immediately.
• If acid is swallowed:
1. Drink large amounts of water or milk.
2. Then drink milk of magnesia, beaten eggs, or
vegetable oil.
3. Get medical attention immediately.
USE CARE AROUND HIGH-
PRESSURE FLUID LINES
Avoid High-pressure Fluids
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid injury from escaping fluid under pressure by
stopping the engine and relieving pressure in the
system before disconnecting or connecting hydraulic or
other lines. Tighten all connections before applying
pressure.
Search for leaks with a piece of cardboard. Protect
hands and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any
fluid injected into the skin must be surgically removed
within a few hours or gangrene may result. Doctors
unfamiliar with this type of injury should reference a
knowledgeable medical source. Such information is
available from Deere & Company Medical Department
in Moline, Illinois, U.S.A.
Avoid Heating Near Pressurized
Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to
yourself and bystanders. Do not heat by welding,
soldering, or using a torch near pressurized fluid lines
or other flammable materials. Pressurized lines can be
accidentally cut when heat goes beyond the immediate
flame area.
6. SAFETY
1 - 4 7/27/00
USE SAFE SERVICE PROCEDURES
Wear Protective Clothing
Wear close fitting clothing and safety equipment
appropriate to the job.
Prolonged exposure to loud noise can cause
impairment or loss of hearing. Wear a suitable hearing
protective device such as earmuffs or earplugs to
protect against objectionable or uncomfortable loud
noises.
Operating equipment safely requires the full attention
of the operator. Do not wear radio or music
headphones while operating machine.
Service Machines Safely
Tie long hair behind your head. Do not wear a necktie,
scarf, loose clothing, or necklace when you work near
machine tools or moving parts. If these items were to
get caught, severe injury could result.
Remove rings and other jewelry to prevent electrical
shorts and entanglement in moving parts.
Use Proper Tools
Use tools appropriate to the work. Makeshift tools and
procedures can create safety hazards. Use power tools
only to loosen threaded parts and fasteners. For
loosening and tightening hardware, use the correct size
tools. DO NOT use U.S. measurement tools on metric
fasteners. Avoid bodily injury caused by slipping
wrenches. Use only service parts meeting John Deere
specifications.
Park Machine Safely
Before working on the machine:
1. Lower all equipment to the ground.
2. Stop the engine and remove the key.
3. Disconnect the battery ground strap.
4. Hang a “DO NOT OPERATE” tag in operator
station.
Support Machine Properly And Use
Proper Lifting Equipment
If you must work on a lifted machine or attachment,
securely support the machine or attachment.
Do not support the machine on cinder blocks, hollow
tiles, or props that may crumble under continuous load.
Do not work under a machine that is supported solely
by a jack. Follow recommended procedures in this
manual.
Lifting heavy components incorrectly can cause severe
injury or machine damage. Follow recommended
procedure for removal and installation of components
in the manual.
Work In Clean Area
Before starting a job:
1. Clean work area and machine.
2. Make sure you have all necessary tools to do your
job.
3. Have the right parts on hand.
4. Read all instructions thoroughly; do not attempt
shortcuts.
7. SAFETY
7/27/00 1 - 5
Using High Pressure Washers
Directing pressurized water at electronic/electrical
components or connectors, bearings, hydraulic seals,
fuel injection pumps or other sensitive parts and
components may cause product malfunctions. Reduce
pressure and spray at a 45 to 90 degree angle.
Illuminate Work Area Safely
Illuminate your work area adequately but safely. Use a
portable safety light for working inside or under the
machine. Make sure the bulb is enclosed by a wire
cage. The hot filament of an accidentally broken bulb
can ignite spilled fuel or oil.
Work In Ventilated Area
Engine exhaust fumes can cause sickness or death. If
it is necessary to run an engine in an enclosed area,
remove the exhaust fumes from the area with an
exhaust pipe extension.
If you do not have an exhaust pipe extension, open the
doors and get outside air into the area.
WARNING: California Proposition 65
Warning:
Diesel engine exhaust and some of its constituents are
known to the State of California to cause cancer, birth
defects, and other reproductive harm.
Gasoline engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Remove Paint Before Welding Or
Heating
Avoid potentially toxic fumes and dust. Hazardous
fumes can be generated when paint is heated by
welding, soldering, or using a torch. Do all work outside
or in a well ventilated area. Dispose of paint and
solvent properly. Remove paint before welding or
heating: If you sand or grind paint, avoid breathing the
dust. Wear an approved respirator. If you use solvent or
paint stripper, remove stripper with soap and water
before welding. Remove solvent or paint stripper
containers and other flammable material from area.
Allow fumes to disperse at least 15 minutes before
welding or heating.
Avoid Harmful Asbestos Dust
Avoid breathing dust that may be generated when
handling components containing asbestos fibers.
Inhaled asbestos fibers may cause lung cancer.
Components in products that may contain asbestos
fibers are brake pads, brake band and lining
assemblies, clutch plates, and some gaskets. The
asbestos used in these components is usually found in
a resin or sealed in some way. Normal handling is not
hazardous as long as airborne dust containing
asbestos is not generated.
Avoid creating dust. Never use compressed air for
cleaning. Avoid brushing or grinding material
containing asbestos. When servicing, wear an
approved respirator. A special vacuum cleaner is
recommended to clean asbestos. If not available, apply
a mist of oil or water on the material containing
asbestos. Keep bystanders away from the area.
SERVICE TIRES SAFELY
Explosive separation of a tire and rim parts can cause
serious injury or death.
Do not attempt to mount a tire unless you have the
proper equipment and experience to perform the job.
Always maintain the correct tire pressure. Do not inflate
the tires above the recommended pressure. Never weld
or heat a wheel and tire assembly. The heat can cause
an increase in air pressure resulting in a tire explosion.
Welding can structurally weaken or deform the wheel.
When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side and
NOT in front of or over the tire assembly. Use a safety
cage if available.
Check wheels for low pressure, cuts, bubbles,
damaged rims or missing lug bolts and nuts.
8. SAFETY
1 - 6 7/27/00
AVOID INJURY FROM ROTATING
BLADES, AUGERS AND PTO
SHAFTS
Keep hands and feet away while machine is running.
Shut off power to service, lubricate or remove mower
blades, augers or PTO shafts.
SERVICE COOLING SYSTEM
SAFELY
Explosive release of fluids from pressurized cooling
system can cause serious burns.
Shut off machine. Only remove filler cap when cool
enough to touch with bare hands. Slowly loosen cap to
first stop to relieve pressure before removing
completely.
HANDLE CHEMICAL PRODUCTS
SAFELY
Direct exposure to hazardous chemicals can cause
serious injury. Potentially hazardous chemicals used
with John Deere equipment include such items as
lubricants, coolants, paints, and adhesives.
A Material Safety Data Sheet (MSDS) provides specific
details on chemical products: physical and health
hazards, safety procedures, and emergency response
techniques. Check the MSDS before you start any job
using a hazardous chemical. That way you will know
exactly what the risks are and how to do the job safely.
Then follow procedures and recommended equipment.
Dispose of Waste Properly
Improperly disposing of waste can threaten the
environment and ecology. Potentially harmful waste
used with John Deere equipment include such items as
oil, fuel, coolant, brake fluid, filters, and batteries. Use
leakproof containers when draining fluids. Do not use
food or beverage containers that may mislead
someone into drinking from them. Do not pour waste
onto the ground, down a drain, or into any water
source. Inquire on the proper way to recycle or dispose
of waste from your local environmental or recycling
center, or from your John Deere dealer.
LIVE WITH SAFETY
Before returning machine to customer, make sure
machine is functioning properly, especially the safety
systems. Install all guards and shields.
12. 7/27/00 2 - 5
SPECIFICATIONS & INFORMATION FASTENER TORQUE VALUES
FASTENER TORQUE VALUES
JIS FASTENER TORQUE VALUES
DO NOT use these hand torque values if a different torque value or tightening procedure is given for a specific
application. Torque values listed are for general use only and include a ±10% variance factor. Check tightness of
fasteners periodically. DO NOT use air powered wrenches.
Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical grade.
Fasteners should be replaced with the same grade. Make sure fastener threads are clean and that you properly
start thread engagement. This will prevent them from failing when tightening.
When bolt and nut combination fasteners are used, torque values should be applied to the NUT instead of the bolt
head.
Tighten toothed or serrated-type lock nuts to the full torque value.
a “Lubricated” means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings. “Dry”
means plain or zinc plated (yellow dichromate - Specification JDS117) without any lubrication. At the time of printing,
these numbers were not available.
b
“Grade 2” applies for hex cap screws (not hex bolts) up to 152 mm (6-in.) long. “Grade 1” applies for hex
cap screws over 152 mm (6-in.) long, and for all other types of bolts and screws of any length.
Reference: JDS—G200.
Grade 7T Grade 8.8T Grade 11T
Lubricateda Drya
Lubricateda Drya Lubricateda Drya
SIZE N•m lb-ft N•m lb-ft -- -- N•m lb-ft N•m lb-ft N•m lb-ft
8mm -- -- 23-29 17-22 -- -- 25-35 19-26 -- -- 29-41 22-30
10mm -- -- 44-59 33-43 -- -- 51-67 38-49 -- -- 61-80 45-59
12mm -- -- 78-98 58-72 -- -- 83-113 61-83 -- -- 103-132 76-98
14mm -- -- 118-147 87-109 -- -- 127-167 94-123 -- -- 152-201 112-148
16mm -- -- 167-206 123-152
J.I.S.
Grade
and Head
Markings
7T 8.8T 11T
13. 2 - 6 7/27/00
METRIC FASTENER TORQUE VALUES SPECIFICATIONS & INFORMATION
METRIC FASTENER TORQUE VALUES
DO NOT use these hand torque values if a different torque value or tightening procedure is given for a specific
application. Torque values listed are for general use only and include a ±10% variance factor. Check tightness of
fasteners periodically. DO NOT use air powered wrenches.
Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical grade.
Fasteners should be replaced with the same grade. Make sure fastener threads are clean and that you properly
start thread engagement. This will prevent them from failing when tightening.
When bolt and nut combination fasteners are used, torque values should be applied to the NUT instead of the bolt
head.
Tighten toothed or serrated-type lock nuts to the full torque value.
a
“Lubricated” means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings. “Dry”
means plain or zinc plated (yellow dichromate - Specification JDS117) without any lubrication.
Reference: JDS—G200.
Class 4.8 Class 8.8 or 9.8 Class 10.9 Class 12.9
Lubricateda Drya Lubricateda Drya Lubricateda Drya Lubricateda Drya
SIZE N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft
M6 48 3.5 6 4.5 9 6.5 11 8.5 13 9.5 17 12 15 11.5 19 14.5
M8 12 8.5 15 11 22 16 28 20 32 24 40 30 37 28 47 35
M10 23 17 29 21 43 32 55 40 63 47 80 60 75 55 95 70
M12 40 29 50 37 75 55 95 70 110 80 140 105 130 95 165 120
M14 63 47 80 60 120 88 150 110 175 130 225 165 205 150 260 109
M16 100 73 125 92 190 140 240 175 275 200 350 225 320 240 400 300
M18 135 100 175 125 260 195 330 250 375 275 475 350 440 325 560 410
M20 190 140 240 180 375 275 475 350 530 400 675 500 625 460 800 580
M22 260 190 330 250 510 375 650 475 725 540 925 675 850 625 1075 800
M24 330 250 425 310 650 475 825 600 925 675 1150 850 1075 800 1350 1000
M27 490 360 625 450 950 700 1200 875 1350 1000 1700 1250 1600 1150 2000 1500
M30 675 490 850 625 1300 950 1650 1200 1850 1350 2300 1700 2150 1600 2700 2000
M33 900 675 1150 850 1750 1300 2200 1650 2500 1850 3150 2350 2900 2150 3700 2750
M36 1150 850 1450 1075 2250 1650 2850 2100 3200 2350 4050 3000 3750 2750 4750 3500
TS1163
4.8
8.8 9.8
10.9
12.9
5 10
12
Property
Class
and
Head
Markings
Property
Class
and
Nut
Markings
4.8
4.8
5
5
8.8
8.8
9.8
9.8
10.9
10.9 12.9
12.9
12.9
12
12
10 10
10
10
10
14. 7/27/00 2 - 7
SPECIFICATIONS & INFORMATION INCH FASTENER TORQUE VALUES
INCH FASTENER TORQUE VALUES
DO NOT use these hand torque values if a different torque value or tightening procedure is given for a specific
application. Torque values listed are for general use only and include a ±10% variance factor. Check tightness of
fasteners periodically. DO NOT use air powered wrenches.
Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical grade.
Fasteners should be replaced with the same grade. Make sure fastener threads are clean and that you properly
start thread engagement. This will prevent them from failing when tightening.
When bolt and nut combination fasteners are used, torque values should be applied to the NUT instead of the bolt
head.
Tighten toothed or serrated-type lock nuts to the full torque value.
a
“Lubricated” means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings. “Dry”
means plain or zinc plated (yellow dichromate - Specification JDS117) without any lubrication.
b
“Grade 2” applies for hex cap screws (not hex bolts) up to 152 mm (6-in.) long. “Grade 1” applies for hex
cap screws over 152 mm (6-in.) long, and for all other types of bolts and screws of any length.
Reference: JDS—G200.
Grade 1 Grade 2b
Grade 5, 5.1 or 5.2 Grade 8 or 8.2
Lubricateda Drya Lubricateda Drya Lubricateda Drya Lubricateda Drya
SIZE N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft
1/4 3.7 2.8 4.7 3.5 6 4.5 7.5 5.5 9.5 7 12 9 13.5 10 17 12.5
5/16 7.7 5.5 10 7 12 9 15 11 20 15 25 18 28 21 35 26
3/8 14 10 17 13 22 16 27 20 35 26 44 33 50 36 63 46
7/16 22 16 28 20 35 26 44 32 55 41 70 52 80 58 100 75
1/2 33 25 42 31 53 39 67 50 85 63 110 80 120 90 150 115
9/16 48 36 60 45 75 56 95 70 125 90 155 115 175 130 225 160
5/8 67 50 85 62 105 78 135 100 170 125 215 160 215 160 300 225
3/4 120 87 150 110 190 140 240 175 300 225 375 280 425 310 550 400
7/8 190 140 240 175 190 140 240 175 490 360 625 450 700 500 875 650
1 290 210 360 270 290 210 360 270 725 540 925 675 1050 750 1300 975
1-1/8 470 300 510 375 470 300 510 375 900 675 1150 850 1450 1075 1850 1350
1-1/4 570 425 725 530 570 425 725 530 1300 950 1650 1200 2050 1500 2600 1950
1-3/8 750 550 950 700 750 550 950 700 1700 1250 2150 1550 2700 2000 3400 2550
1-1/2 1000 725 1250 925 990 725 1250 930 2250 1650 2850 2100 3600 2650 4550 3350
TS1162
1 or 2b
2
5 5.1 5.2
5
8 8.2
8
No Marks
No Marks
SAE
Grade
and Nut
Markings
SAE
Grade
and Head
Markings
15. 2 - 8 7/27/00
DIESEL FUEL SPECIFICATIONS SPECIFICATIONS & INFORMATION
DIESEL FUEL SPECIFICATIONS
DIESEL FUEL
In general, diesel fuels are blended to satisfy the low air
temperature requirements of the geographical area in
which they are sold.
In North America, diesel fuel is usually specified to
ASTM D975 and sold as either Grade 1 for cold air
temperatures or Grade 2 for warm air temperatures.
If diesel fuels being supplied in your area DO NOT
meet any of the above specifications, use diesel fuels
with the following equivalent properties:
• Cetane Number 40 (minimum)
A cetane number greater than 50 is preferred,
especially for air temperatures below –20 °C (–4 °F) or
elevations above 1500 m (5000 ft).
• Cold Filter Plugging Point (CFPP)
The temperature at which diesel fuel begins to cloud
or jell. Use diesel fuels with a CFPP which is at least 5
°C (9 °F) below the expected low air temperature.
• Sulfur Content of 0.05% (maximum)
Diesel fuels for highway use in the United States now
require sulfur content to be less than 0.05%.
If diesel fuel being used has a sulfur content greater
than 0.5%, reduce the service interval for engine oil
and filter by 50%.
Consult your local diesel fuel distributor for properties
of the diesel fuel available in your area.
DIESEL FUEL LUBRICITY
Diesel fuel must have adequate lubricity to ensure
proper operation and durability of fuel injection system
components. Fuel lubricity should pass a minimum of
3300 gram load level as measured by the BOCLE
scuffing test.
DIESEL FUEL STORAGE
IMPORTANT: DO NOT USE GALVANIZED
CONTAINERS—diesel fuel stored in galvanized
containers reacts with zinc coating in the
container to form zinc flakes. If fuel contains
water, a zinc gel will also form. The gel and
flakes will quickly plug fuel filters and damage
fuel injectors and fuel pumps.
It is recommended that diesel fuel be stored ONLY in a
clean, approved POLYETHYLENE PLASTIC container
WITHOUT any metal screen or filter. This will help
prevent any accidental sparks from occurring. Store
fuel in an area that is well ventilated to prevent possible
igniting of fumes by an open flame or spark, this
includes any appliance with a pilot light.
IMPORTANT: Keep all dirt, scale, water or other
foreign material out of fuel.
Keep fuel in a safe, protected area and in a clean,
properly marked (“DIESEL FUEL”) container. DO NOT
use deicers to attempt to remove water from fuel. DO
NOT depend on fuel filters to remove water from fuel. It
is recommended that a water separator be installed in
the storage tank outlet. BE SURE to properly discard
unstable or contaminated diesel fuel and/or their
containers when necessary.
ENGINE OIL
Use the appropriate oil viscosity based on the expected
air temperature range during the period between
recommended oil changes. Operating outside of these
recommended oil air temperature ranges may cause
premature engine failure.
The following John Deere oils are PREFERRED:
• PLUS–50®—SAE 15W-40;
• TORQ–GARD SUPREME®—SAE 5W-30.
• TORQ–GARD SUPREME®—SAE 15W-40;
• UNI–GARD™—SAE 15W-40;
• UNI–GARD™—SAE 5W-30.
The following John Deere oils are also recommended,
based on their specified temperature range:
• TURF–GARD®—SAE 10W-30;
• PLUS–4®—SAE 10W-30;
• TORQ–GARD SUPREME®—SAE 30.
• UNI–GARD™—SAE 10W-30;
• UNI–GARD™—SAE 30.
Other oils may be used if above John Deere oils are not
available, provided they meet one of the following
specifications:
• SAE 15W-40—API Service Classification CF–4 or
higher;
• SAE 5W-30—API Service Classification CC or
higher;
• SAE 10W-30—API Service Classification CF or
higher;
• SAE 30—API Service Classification CF or higher.
• CCMC Specification D4 or Mercedes Benz
MB228.1 or higher.
c WARNING
California Proposition 65 Warning: Diesel engine
exhaust and some of its elements from this
product are known to the State of California to
cause cancer, birth defects, or other
reproductive harm.
16. 7/27/00 5 - 19
POWER TRAIN TESTS AND ADJUSTMENTS
TESTS AND ADJUSTMENTS
CLUTCH PEDAL ADJUSTMENT
Purpose:
To make sure the traction clutch is fully engaged when
the clutch pedal is released and fully disengaged when
the pedal is depressed.
Procedure:
1. Check clutch pedal free travel.
2. If free travel is not to specification, loosen jam nuts
(A) and adjust the turnbuckle (B) until free travel
meets specification.
Specification: . . . . . . . . . . 20 - 25 mm (0.78 - 1.0 in.)
DIFFERENTIAL BACKLASH
ADJUSTMENT
Reason:
To place the differential ring gear in proper relationship
with the differential input pinion shaft.
IMPORTANT: It is necessary to adjust the backlash
if the ring gear and pinion was replaced, or if the
backlash measurement is not within
specification.
Procedure:
1. Access the differential ring gear.
2. While slowly rotating the differential housing carrier,
use a soft faced mallet to lightly tap the face of the
ring gear to move it and the carrier toward the left-
side bearing cover.
NOTE: This is to ensure that the carrier and bearings
are seated.
3. Attach a dial indicator to the transmission housing.
4. Locate the contact point of the dial indicator toward
the outer part of the ring gear tooth (A) and as
close to perpendicular to the tooth as possible.
5. While holding the differential pinion shaft stationary
at the pinion, rotate the ring gear and note the
backlash reading on the dial indicator.
Specification:
Backlash . . . . . . . . 0.13 - 0.18 mm (0.005 - 0.007 in.)
To Adjust Backlash:
1. Remove the left side final drive. See “FINAL
DRIVE” on page 42.
MX1096
B
20 - 25 mm (0.78 - 1.0 in.)
A
M91848
A
M89547
B
C
17. 5 - 20 7/27/00
REPAIR POWER TRAIN
2. The shim(s) (B) are located between the differential
bearing carrier (C) and bearing. Remove shims to
increase the backlash, or add shim(s) to decrease
the backlash.
NOTE: Shims (B) are available in 0.1 mm (0.004 in.),
0.3 mm (0.012 in.), and 0.5 mm (0.020 in.)
thicknesses.
3. Install the differential bearing carrier.
4. Recheck the backlash.
NOTE: If the backlash is within specification, finish
installation of the differential bearing carrier
and the final drive. If the backlash is not within
specification, adjust the shim thickness until
the backlash is within specifications.
REPAIR
TRACTOR SPLITTING (FRONT)
Procedure:
1. Park tractor on a level surface. Engage park brake,
shut off engine.
2. Disconnect battery cables.
3. Remove side panels.
4. Remove hood.
5. Remove lower control panel. (See “CONTROL
PANEL” on p a g e8 in Miscellaneous Section.)
6. Remove key switch panel.
7. Remove starting motor.
8. Remove muffler and gasket.
9. 4-WD Models: Disconnect and remove drive shaft.
10. Models with SCV kit: Disconnect front bracket
securing hydraulic lines.
11. Remove foot rests.
12. Lower rockshaft and drain hydraulic oil from
reservoir.
NOTE: Capacity of the hydraulic reservoir is 26 liters
(6.9 gal).
13. Put a drain pan under the pumps to catch
remaining oil.
14. Loosen clamp (A) and disconnect suction line from
pumps. Remove suction tube from oil filter to
pumps.
15. Disconnect pressure tubes (B) from pump(s) and
remove hydraulic pressure tubes from tractor.
M91855A
C
A
B
MX1086
B
A
18. 7/27/00 5 - 21
POWER TRAIN TRACTOR SPLITTING (FRONT)
16. Install splitting stands (F) on transmission tunnel.
17. Disconnect electrical connector (G) and tachometer
cable (H).
18. Close shutoff valve on fuel filter.
19. Disconnect fuel lines and close openings with caps
and plugs.
20. Remove throttle control rod (I).
21. Remove clamp (J) securing hydraulic lines to
engine.
22. Disconnect hydraulic lines (K).
23. Remove wiring harness (L) connectors from
headlights and pull wiring harness out from front.
24. Remove cap screw securing ground wire (M) to
transmission tunnel.
25. Disconnect wire (N) from manifold heater.
26. Remove four cap screws securing air shield (O) to
cylinder head.
27. Install splitting stands onto engine.
28. Loosen seven bolts securing transmission tunnel to
engine.
IMPORTANT: When separating the engine, the
splined coupling on the rear end or middle of
the PTO shaft may fall off into transmission
tunnel.
29. Slightly separate tunnel and engine, ensure all
connections that may interfere all out of the way.
30. Remove all bolts securing sections and slowly
separate engine from rear of tractor. As soon as
possible, secure PTO shaft and keep it from
moving forward with the engine.
NOTE: If the splined coupling (P) on the rear of the
PTO shaft falls off, it can be accessed by
removing the rear PTO. See “REAR PTO
SHAFT ASSEMBLY” on page 51.
If the splined coupling (Q) in the middle of the
PTO shaft falls off, it can be accessed by
removing the mid-PTO plate on the bottom of
the transmission tunnel.
31. Verify that the PTO shaft couplings are engaged by
measuring the distance that the PTO shaft extends
out of the front of the drive shaft. The distance
should be approximately 70 mm (2.75 in.).
Engage the PTO and turn the front of the shaft to
verify that the rear PTO output also turns.
Assemble Tractor Sections:
NOTE: Splines on all driveshafts and couplers must be
aligned before tractor sections will slide
together.
MX1147
F
G
H
MX1148
I
K
J
O
L
M
N
70 mm
(2.75 in.)
Q P
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 5 - 22 7/27/00
DUAL STAGE CLUTCH POWER TRAIN
1. Align splines on drive shafts and engine flywheel.
2. Move tractor sections together and retain with nine
cap screws. Tighten cap screws to 126 - 154 N•m
(95 - 115 lb-ft).
3. Route electrical harness on rear half of tractor.
Connect all electrical connectors attaching wiring
harness to switches and lights on rear half of
tractor. Fasten wiring harness to cable clips.
Replace any plastic tie bands removed during
disassembly.
4. Install key switch panel.
5. Install control panel. (See “CONTROL PANEL” on
page 8 in Miscellaneous Section.)
6. Install hood. (See “HOOD” on page 8 in
Miscellaneous Section.)
7. Install side panels.
8. Connect battery negative terminal.
DUAL STAGE CLUTCH
Removal:
1. Separate engine from clutch housing. (See
“TRACTOR SPLITTING (FRONT)” on page 20.)
IMPORTANT: Install clutch alignment tool in clutch
assembly to keep PTO Clutch disk from falling
from assembly.
2. Insert clutch alignment tool (A) into hub and pilot
bearing in flywheel. Use JDG689 Universal Clutch
Alignment Tool Kit.
3. Remove six cap screws, washers and lock washers
(B). Remove clutch assembly.
4. Inspect and repair clutch assembly and flywheel.
(See procedure in this group.)
Installation:
1. Install clutch alignment tool (B) into clutch
assembly.
2. Place PTO clutch disk (A) on alignment tool with
long end of hub (C) facing toward clutch assembly.
3. Install clutch assembly with clutch alignment tool
(A) still in place. There will be slight movement
(clearance) between the straight (non-tapered)
section of the tool hub and the traction clutch hub.
NOTE: Thin tape could also be wrapped around the
tool hub to better center the traction clutch.
4. Push the tapered end of the clutch alignment tool
forward to hold the PTO clutch in place during
tightening of the clutch assembly to the pressure
plate. If closer centering is necessary, visually
center the traction clutch within the pressure plate
by aligning the clutch rivet heads so that they are
equally spaced around the inside diameter of the
pressure plate.
5. Install cap screws (B) and tighten to 22 N•m
(16 lb-ft).
6. Remove clutch alignment tool.
M53583
MX0959
B
A
M53584
M53583
MX0959
B
A
21. 7/27/00 5 - 23
POWER TRAIN DUAL STAGE CLUTCH
7. Screw in cap screws (A).
8. Set clearance between cap screw head (A) and
clutch hub (B) at 1.5 mm (0.060 in.) using a feeler
gauge.
9. Tighten nuts (C) to 18 N•m (159 lb-in). Recheck
cap screw head clearance.
10. Adjust clutch finger screw (A) to touch raised center
portion of tool.
11. Tighten nut (B) to 19 N•m (168 lb-in).
12. Repeat procedure for each clutch finger.
13. Install engine to clutch housing. See “Assemble
Tractor Sections:” on page21".
14. Adjust clutch pedal free-play. See “CLUTCH
PEDAL ADJUSTMENT” on page 19.
• If not equipped with a Clutch Adjusting Gauge,
follow adjustment procedures and specifications
below.
Specifications:
Clutch Finger Screw-to-Flywheel 113 mm (4.452 in.)
Tolerance . . . . . . . . . . . . . . . . . . 98.5 mm (3.878 in.)
Repair:
1. Mark clutch cover and pressure plates (A) for
correct orientation during reassembly.
2. Loosen jam nuts (B) and turn cap screws (C) out of
PTO pressure plate (D).
3. Lift cover (E) from assembly.
4. Lift out clutch disc (F). Inspect for wear or damage.
Measure thickness of friction material (G). Replace
clutch disc if below specification.
Specification:
Minimum Friction Material Thickness
Transmission Drive Clutch . . . . . . . 7.6 mm (0.3 in.)
PTO Drive Clutch . . . . . . . . . . . . . . . 7 mm (0.270 in.)
M53585
C
B
A
M53853
MX1166 A
D
B
C
E
MX1167
G
F
22. 5 - 24 7/27/00
DUAL STAGE CLUTCH POWER TRAIN
5. Check friction area (H) of center pressure plates for
grooves, cracks, and discoloration from heat.
Place a straight edge across pressure plate and
measure for flatness with a feeler gauge. Replace
pressure plate(s) if surfaces are not within
specification.
Specification:
Pressure Plate Flatness
Maximum. . . . . . . . . . . . . . . . . . . . . 0.2mm (0.008 in.)
6. Inspect levers, pins, and bushings (I) for wear or
damage. Replace parts as needed.
Assembly:
7. Install diaphragm (J) with raised side of outside
diameter up toward friction plate.
8. Line up marks on plate (K) and cover (L) and lay
plate into cover.
9. Make sure the diaphragm is centered in the plate
and inside tabs (M) before securing levers to
cover.
MX1168
H
MX1169
H
MX1170
I
MX1171
J
K
L
M