This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere XUV 850D Gator Utility Vehicle Service Repair Manual (tm1737).pdffjskekmdmdm1
This technical manual provides service and repair information for the John Deere XUV 850D Gator utility vehicle. The manual is organized into sections covering specifications, safety, components, operation, diagnostics, and repairs. It is intended as a resource for experienced technicians to service and repair this vehicle. Safety notices and procedures are highlighted throughout to warn technicians of hazards.
This document provides instructions for removing and installing various engine components on a Caterpillar C9.3 engine, including:
1) Removing and installing the valve mechanism cover, involving disconnecting hoses and harnesses, removing nuts and bolts, and installing in reverse order.
2) Removing and installing the compression brake, which requires adjusting engine valve lash, removing/installing bolts, checking seals, and setting brake lash.
3) Disassembling and assembling the compression brake valve assembly by removing/installing bolts and O-rings.
4) Removing and installing the rocker arm shaft assembly, which involves disconnecting harnesses, removing nuts and bol
This document provides instructions for installing a flywheel on a Caterpillar 434F backhoe loader engine. It describes cleaning and preparing the flywheel and crankshaft, installing guide bolts and lifting the flywheel into place with bolts finger tight before fully tightening. It also describes inspecting the flywheel runout after installation and reinstalling other components like the electric starting motor.
1) The document provides instructions for removing and installing a lifter group on a C2.2 engine. It lists the required tool and removal steps, which include using a telescopic magnet to remove the lifters from the valve mechanism housing.
2) Installation instructions include cleaning components, lubricating the lifters, and inserting the lifters into the valve mechanism housing using the telescopic magnet. Proper lifter orientation is noted.
3) Completing the job involves installing the valve mechanism cover after checking lifter rotation.
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including:
- Removing and installing the turbocharger
- Removing and installing the exhaust manifold
- Removing the inlet manifold
- Installing the inlet manifold
- Removing and installing inlet and exhaust valve springs
The document includes illustrations and multistep procedures for each component, with notices about keeping parts clean and containing fluids.
This document provides instructions for disassembling and assembling the governor components in a Caterpillar 3034 engine. It describes removing components like the governor weight assembly, speed control lever, and linkage for the fuel injection pump. Detailed steps are provided to disassemble each component and check for wear. The assembly section then describes reinstalling each part and adjusting any settings that may be affected. Precautions are noted to keep parts clean and contain fluids during the process.
The document provides instructions for removing and installing an exhaust manifold on a 249D Compact Track Loader powered by a C2.2 engine. The removal procedure involves loosening fasteners, removing the exhaust manifold and gasket, and removing any studs. For installation, clean surfaces are required, a new gasket is installed, the manifold is aligned and fastened, and bolts are tightened to the specified torque. Safety precautions and notes about different engine models are provided.
John Deere XUV 850D Gator Utility Vehicle Service Repair Manual (tm1737).pdffjskekmdmdm1
This technical manual provides service and repair information for the John Deere XUV 850D Gator utility vehicle. The manual is organized into sections covering specifications, safety, components, operation, diagnostics, and repairs. It is intended as a resource for experienced technicians to service and repair this vehicle. Safety notices and procedures are highlighted throughout to warn technicians of hazards.
This document provides instructions for removing and installing various engine components on a Caterpillar C9.3 engine, including:
1) Removing and installing the valve mechanism cover, involving disconnecting hoses and harnesses, removing nuts and bolts, and installing in reverse order.
2) Removing and installing the compression brake, which requires adjusting engine valve lash, removing/installing bolts, checking seals, and setting brake lash.
3) Disassembling and assembling the compression brake valve assembly by removing/installing bolts and O-rings.
4) Removing and installing the rocker arm shaft assembly, which involves disconnecting harnesses, removing nuts and bol
This document provides instructions for installing a flywheel on a Caterpillar 434F backhoe loader engine. It describes cleaning and preparing the flywheel and crankshaft, installing guide bolts and lifting the flywheel into place with bolts finger tight before fully tightening. It also describes inspecting the flywheel runout after installation and reinstalling other components like the electric starting motor.
1) The document provides instructions for removing and installing a lifter group on a C2.2 engine. It lists the required tool and removal steps, which include using a telescopic magnet to remove the lifters from the valve mechanism housing.
2) Installation instructions include cleaning components, lubricating the lifters, and inserting the lifters into the valve mechanism housing using the telescopic magnet. Proper lifter orientation is noted.
3) Completing the job involves installing the valve mechanism cover after checking lifter rotation.
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including:
- Removing and installing the turbocharger
- Removing and installing the exhaust manifold
- Removing the inlet manifold
- Installing the inlet manifold
- Removing and installing inlet and exhaust valve springs
The document includes illustrations and multistep procedures for each component, with notices about keeping parts clean and containing fluids.
This document provides instructions for disassembling and assembling the governor components in a Caterpillar 3034 engine. It describes removing components like the governor weight assembly, speed control lever, and linkage for the fuel injection pump. Detailed steps are provided to disassemble each component and check for wear. The assembly section then describes reinstalling each part and adjusting any settings that may be affected. Precautions are noted to keep parts clean and contain fluids during the process.
The document provides instructions for removing and installing an exhaust manifold on a 249D Compact Track Loader powered by a C2.2 engine. The removal procedure involves loosening fasteners, removing the exhaust manifold and gasket, and removing any studs. For installation, clean surfaces are required, a new gasket is installed, the manifold is aligned and fastened, and bolts are tightened to the specified torque. Safety precautions and notes about different engine models are provided.
CASE IH AXIAL-FLOW 7230 Combine Service Repair Manual (PIN YDG222001 and abov...fjskekmdmdm1
This document is a service manual for Axial-Flow combine models 7230, 8230, and 9230 from CNH America LLC. It contains over 20 sections that provide technical specifications, diagrams, and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, attachments/headers, and other major components of the combines. The service manual is intended to assist technicians in servicing and repairing the combines.
CASE IH AXIAL-FLOW 7230 Tier 4 Combine Service Repair Manual.pdffjskekmdmdm1
This document is the service manual for Case IH Axial-Flow combines. It contains sections on the engine, transmission, axles, hydraulics, electrical systems, attachments, and other components. The manual provides technical specifications and instructions for servicing and repairing parts. It aims to help qualified service technicians safely maintain and fix issues with the combines.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...fjskekmdmdm1
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover by loosening the clamp.
3. Removing the bolts securing the regulator housing and removing the housing to access the internal components.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 320D L excavator. The removal procedure involves using a link bracket and lifting device to remove the flywheel housing after removing bolts and washers. A driver group is then used to remove the oil seal from the housing. The installation procedure is not described.
John Deere 47 and 59 Snowbowers Service Repair Manual.pdffjskekmdmdm1
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
The document provides instructions for removing and installing a flywheel housing on a 422E Backhoe Loader. Key steps include:
1. Removing the flywheel, bolts, and lifting the housing off the engine block using lifting devices.
2. Inspecting the crankshaft rear seal for leaks before installing a cleaned housing with dowels and bolts, checking alignment with a dial indicator.
3. Reinstalling the flywheel to complete the process.
Caterpillar Cat 307 EXCAVATOR (Prefix 2WM) Service Repair Manual (2WM00001-00...fjskekmdmdm1
This document provides instructions for removing, disassembling, assembling, and installing pistons and connecting rods in a 3054 engine. The removal process involves removing the cylinder head, oil pump, and piston cooling jets before pushing the pistons and connecting rods out of the cylinder block. Disassembly requires using tools to remove the piston rings and pins. Assembly requires lubricating and pressing components, and ensuring proper ring and bearing installation. Installation involves cleaning, lubricating, and inserting the assembled pistons and connecting rods into the cylinder liner and connecting to the crankshaft.
This document provides instructions for removing and installing the crankshaft front seal of a Caterpillar C6.4 engine.
The removal procedure involves using a slide hammer puller to remove the existing seal after drilling holes in it. For installation, a front seal installer tool is used to carefully push the new seal onto the crankshaft flange. Proper cleaning and containment of fluids is emphasized.
Caterpillar Cat 307D Mini Hydraulic Excavator (Prefix DSG) Service Repair Man...fjskekmdmdm1
The document provides instructions for removing and installing various engine components on a 307D Mini Hydraulic Excavator including the fuel filter and water separator base, engine oil filter and oil filter base, and air cleaner. The procedures describe draining fluids, disconnecting hoses, removing bolts and filters, cleaning parts, applying oil, and reinstalling components in the reverse order of removal. Safety precautions are provided to prevent injury and contain fluids.
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover and removing mounting bolts.
3. Installing the new regulator by reversing the removal steps, filling the cooling system, and tightening all connections to the specified torques.
Cleanliness is important to prevent contamination, and safety precautions are described for working with hot coolant and steam.
The document provides instructions for removing and installing various crankshaft and flywheel components on a Caterpillar 272D skid steer loader. The procedures include removing the flywheel, flywheel housing, crankshaft rear seal, crankshaft rear seal carrier, and crankshaft pulley. Illustrations and torque specifications are provided. Tools required are also listed. The document is from a Caterpillar service manual and aims to guide maintenance and repair of engine components.
Caterpillar Cat 320D L Excavator (Prefix JFZ) Service Repair Manual (JFZ00001...fjskekmdmdm1
The document provides instructions for removing and installing the flywheel and flywheel housing on a Caterpillar 320D excavator engine. It describes using various tools to remove components like the muffler, bolts, and flywheel. Detailed steps are outlined for removing the flywheel using link brackets and forcing bolts. Similar steps are then provided for installing the flywheel housing, flywheel, crankshaft rear seal, and crankshaft pulley.
CASE IH AXIAL-FLOW 7120 Combine Service Repair Manual.pdffjskekmdmdm1
This document is a service manual for Case IH Axial-Flow combines models 7120, 8120, and 9120. It contains over 200 sections covering all aspects of the combines from the engine and drivetrain to the electrical systems to attachments. Each section provides information and specifications for servicing that component. Safety precautions are provided at the beginning regarding personal safety when working on the equipment.
Caterpillar Cat 320D L Excavator (Prefix CXY) Service Repair Manual (CXY00001...fjskekmdmdm1
This document provides instructions for removing and installing components related to the fuel system of a Caterpillar 320D excavator engine, including:
- Removing and installing the fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing new fuel injection nozzles.
- Removing and installing the fuel shutoff solenoid.
- Removing the fuel injection pump.
The document contains detailed step-by-step instructions accompanied by illustrations. Safety notices are provided throughout cautioning technicians to take measures to prevent contamination of fuel system components. Required tools are listed for each procedure.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual.pdffjskekmdmdm1
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
This document provides instructions for removing and installing the fuel injection pump on a 307 Mini Hydraulic Excavator with a 3054 engine. It describes the required tools and safety precautions. The removal process involves loosening a locking screw, rotating the crankshaft to align holes, inserting a timing pin and removing bolts. The installation requires checking the O-ring seal, lubricating it, installing the pump while aligning holes with a timing pin, and torquing bolts to the specified value.
Caterpillar Cat 160G Motor Grader (Prefix 4JD) Service Repair Manual (4JD0014...fjskekmdmdm1
The document provides instructions for removing and installing fuel system components, including the fuel priming pump, fuel filter base, and fuel transfer pump, on a 160G motor grader with a 3306 engine. The procedures describe disconnecting fuel lines, removing mounting bolts and other fasteners, and installing replacement parts, gaskets, and fittings. Safety notices advise keeping parts clean and containing fluids during maintenance.
This document provides instructions for servicing components of the fuel system on Caterpillar 320D and 320D L excavators, including:
- Removing and installing the fuel filter base
- Removing and installing the fuel injection lines
- Removing the fuel injection nozzles
- Installing the fuel injection nozzles
The summaries provide the essential steps for each procedure in 3 sentences or less.
CASE IH FARMALL 75C Tier 4B (final) Tractor Service Repair Manual.pdffjskekmdmdm1
This document provides a service manual for Case IH Farmall 65C and 75C tractors. It contains introduction information and outlines the manual's contents which are organized by technical system and component. Safety warnings and regulations for working on the tractors are also provided. The document aims to guide maintenance and repair work.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
CASE IH AXIAL-FLOW 7230 Combine Service Repair Manual (PIN YDG222001 and abov...fjskekmdmdm1
This document is a service manual for Axial-Flow combine models 7230, 8230, and 9230 from CNH America LLC. It contains over 20 sections that provide technical specifications, diagrams, and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, attachments/headers, and other major components of the combines. The service manual is intended to assist technicians in servicing and repairing the combines.
CASE IH AXIAL-FLOW 7230 Tier 4 Combine Service Repair Manual.pdffjskekmdmdm1
This document is the service manual for Case IH Axial-Flow combines. It contains sections on the engine, transmission, axles, hydraulics, electrical systems, attachments, and other components. The manual provides technical specifications and instructions for servicing and repairing parts. It aims to help qualified service technicians safely maintain and fix issues with the combines.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...fjskekmdmdm1
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover by loosening the clamp.
3. Removing the bolts securing the regulator housing and removing the housing to access the internal components.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 320D L excavator. The removal procedure involves using a link bracket and lifting device to remove the flywheel housing after removing bolts and washers. A driver group is then used to remove the oil seal from the housing. The installation procedure is not described.
John Deere 47 and 59 Snowbowers Service Repair Manual.pdffjskekmdmdm1
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
The document provides instructions for removing and installing a flywheel housing on a 422E Backhoe Loader. Key steps include:
1. Removing the flywheel, bolts, and lifting the housing off the engine block using lifting devices.
2. Inspecting the crankshaft rear seal for leaks before installing a cleaned housing with dowels and bolts, checking alignment with a dial indicator.
3. Reinstalling the flywheel to complete the process.
Caterpillar Cat 307 EXCAVATOR (Prefix 2WM) Service Repair Manual (2WM00001-00...fjskekmdmdm1
This document provides instructions for removing, disassembling, assembling, and installing pistons and connecting rods in a 3054 engine. The removal process involves removing the cylinder head, oil pump, and piston cooling jets before pushing the pistons and connecting rods out of the cylinder block. Disassembly requires using tools to remove the piston rings and pins. Assembly requires lubricating and pressing components, and ensuring proper ring and bearing installation. Installation involves cleaning, lubricating, and inserting the assembled pistons and connecting rods into the cylinder liner and connecting to the crankshaft.
This document provides instructions for removing and installing the crankshaft front seal of a Caterpillar C6.4 engine.
The removal procedure involves using a slide hammer puller to remove the existing seal after drilling holes in it. For installation, a front seal installer tool is used to carefully push the new seal onto the crankshaft flange. Proper cleaning and containment of fluids is emphasized.
Caterpillar Cat 307D Mini Hydraulic Excavator (Prefix DSG) Service Repair Man...fjskekmdmdm1
The document provides instructions for removing and installing various engine components on a 307D Mini Hydraulic Excavator including the fuel filter and water separator base, engine oil filter and oil filter base, and air cleaner. The procedures describe draining fluids, disconnecting hoses, removing bolts and filters, cleaning parts, applying oil, and reinstalling components in the reverse order of removal. Safety precautions are provided to prevent injury and contain fluids.
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover and removing mounting bolts.
3. Installing the new regulator by reversing the removal steps, filling the cooling system, and tightening all connections to the specified torques.
Cleanliness is important to prevent contamination, and safety precautions are described for working with hot coolant and steam.
The document provides instructions for removing and installing various crankshaft and flywheel components on a Caterpillar 272D skid steer loader. The procedures include removing the flywheel, flywheel housing, crankshaft rear seal, crankshaft rear seal carrier, and crankshaft pulley. Illustrations and torque specifications are provided. Tools required are also listed. The document is from a Caterpillar service manual and aims to guide maintenance and repair of engine components.
Caterpillar Cat 320D L Excavator (Prefix JFZ) Service Repair Manual (JFZ00001...fjskekmdmdm1
The document provides instructions for removing and installing the flywheel and flywheel housing on a Caterpillar 320D excavator engine. It describes using various tools to remove components like the muffler, bolts, and flywheel. Detailed steps are outlined for removing the flywheel using link brackets and forcing bolts. Similar steps are then provided for installing the flywheel housing, flywheel, crankshaft rear seal, and crankshaft pulley.
CASE IH AXIAL-FLOW 7120 Combine Service Repair Manual.pdffjskekmdmdm1
This document is a service manual for Case IH Axial-Flow combines models 7120, 8120, and 9120. It contains over 200 sections covering all aspects of the combines from the engine and drivetrain to the electrical systems to attachments. Each section provides information and specifications for servicing that component. Safety precautions are provided at the beginning regarding personal safety when working on the equipment.
Caterpillar Cat 320D L Excavator (Prefix CXY) Service Repair Manual (CXY00001...fjskekmdmdm1
This document provides instructions for removing and installing components related to the fuel system of a Caterpillar 320D excavator engine, including:
- Removing and installing the fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing new fuel injection nozzles.
- Removing and installing the fuel shutoff solenoid.
- Removing the fuel injection pump.
The document contains detailed step-by-step instructions accompanied by illustrations. Safety notices are provided throughout cautioning technicians to take measures to prevent contamination of fuel system components. Required tools are listed for each procedure.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual.pdffjskekmdmdm1
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
This document provides instructions for removing and installing the fuel injection pump on a 307 Mini Hydraulic Excavator with a 3054 engine. It describes the required tools and safety precautions. The removal process involves loosening a locking screw, rotating the crankshaft to align holes, inserting a timing pin and removing bolts. The installation requires checking the O-ring seal, lubricating it, installing the pump while aligning holes with a timing pin, and torquing bolts to the specified value.
Caterpillar Cat 160G Motor Grader (Prefix 4JD) Service Repair Manual (4JD0014...fjskekmdmdm1
The document provides instructions for removing and installing fuel system components, including the fuel priming pump, fuel filter base, and fuel transfer pump, on a 160G motor grader with a 3306 engine. The procedures describe disconnecting fuel lines, removing mounting bolts and other fasteners, and installing replacement parts, gaskets, and fittings. Safety notices advise keeping parts clean and containing fluids during maintenance.
This document provides instructions for servicing components of the fuel system on Caterpillar 320D and 320D L excavators, including:
- Removing and installing the fuel filter base
- Removing and installing the fuel injection lines
- Removing the fuel injection nozzles
- Installing the fuel injection nozzles
The summaries provide the essential steps for each procedure in 3 sentences or less.
CASE IH FARMALL 75C Tier 4B (final) Tractor Service Repair Manual.pdffjskekmdmdm1
This document provides a service manual for Case IH Farmall 65C and 75C tractors. It contains introduction information and outlines the manual's contents which are organized by technical system and component. Safety warnings and regulations for working on the tractors are also provided. The document aims to guide maintenance and repair work.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
RACI Matrix Managed Services on Cloud 08-11-19_AS.pdf
John Deere 31B Post Hole Digger Service Repair Manual.pdf
1. TM1763 APRIL 2011
JOHN DEERE
WORLDWIDE COMMERCIAL & CONSUMER
EQUIPMENT DIVISION
54D, 60D, 62D and 72D OnRamp™ Mowers; 54, 60 and
72-Inch Mid Mount Mowers; 261 and 272 Rear-Mounted
Mowers; Hydraulic Tillers; 31B Post Hole Digger;
74 and 84 Blades; 26 and 51-Inch Brooms;
47 and 59 Snowblowers; iMatch AutoHitch;
54D, 60D and 72D AutoConnect Mowers
TECHNICAL MANUAL
North American Version
Litho in U.S.A.
2. Manual Description
NOTE: Depending on the particular section or system
being covered, not all of the above groups may be
used.
INTRODUCTION
Specifications
Rotary Mowers
Safety
Rotary Tillers
Post Hole Digger
Blades
Rotary Brooms
Snowblowers
iMatch AutoHitch
Miscellaneous
AutoConnect Mowers
3.
SAFETY
Recognize Safety Information
Understand Signal Words
Replace Safety Signs
Be Prepared for Emergencies
4.
SAFETY
Use Care Around High-Pressure Fluid Lines
Avoid High-Pressure Fluids
Avoid Heating Near Pressurized Fluid Lines
Use Safe Service Procedures
Wear Protective Clothing
Service Machines Safely
Use Proper Tools
DO
NOT
5.
SAFETY
Support Machine Properly and Use Proper Lifting
Equipment
Work in Clean Area
Before starting a job:
Using High Pressure Washers
Illuminate Work Area Safely
Work in Ventilated Area
WARNING: California Proposition 65 Warning
Remove Paint before Welding or Heating
Avoid Harmful Asbestos Dust
10.
SPECIFICATIONS & INFORMATION SPECIFICATIONS
NUT
“Lubricated” means coated with a lubricant such as
engine oil, or fasteners with phosphate and oil
coatings. “Dry” means plain or zinc plated (yellow
dichromate - Specification JDS117) without any
lubrication.
“Grade 2” applies for hex cap screws (not hex bolts)
up to 152 mm (6 in.) long. “Grade 1” applies for hex cap
screws over 152 mm (6 in.) long, and for all other types
of bolts and screws of any length.
Face Seal Fittings with Inch Stud Ends Torque
C D
E F
G
B
A
E
F
H
H
12. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
13.
SPECIFICATIONS & INFORMATION SPECIFICATIONS
Face Seal Fittings with Metric Stud Ends Torque
A
B
C D
E
F
H
I
E
F
G
I
G
Nominal Tube OD/Hose ID Face Seal Tube/Hose End O-Ring Stud Ends, Straight Fitting or
Lock Nut
Metric
Tube
OD
Inch Tube OD Thread
Size
Hex
Size
Tube Nut/
Swivel
Nut
Torque
Bulkhead
Lock Nut
Torque
Thread
Size
Hex
Size
Steel or
Gray Iron
Torque
Aluminum
Torque
mm Dash
Size
in. mm in. mm N•m lb-ft N•m lb-ft mm mm N•m lb-ft N•m lb-ft
14.
SPECIFICATIONS & INFORMATION SPECIFICATIONS
Note: Torque tolerance is +15%, -20%
O-Ring Face Seal Fittings
O-Ring Boss Fittings
Important: Avoid Damage! DO NOT allow hoses
to twist when tightening fittings. Use two
wrenches to tighten hose connections; one to
hold the hose, and the other to tighten the swivel
fitting.
B
A
A
A
B
Thread Size Torque1
1. Torque tolerance is ± 10 percent.
Number of
Flats2b
N•m lb-ft
C
D
E
15.
SPECIFICATIONS & INFORMATION SPECIFICATIONS
Alternative Lubricants
Synthetic Lubricants
Lubricant Storage
Mixing of Lubricants
Chassis Grease
NON-CLAY HIGH-TEMPERATURE EP GREASE®—
JDM J13E4, NLGI Grade 2.
Transaxle Oil
PREFERRED:
Hy-Gard J20C Oil
Low Viscosity Hy-Gard J20D Oil
2. To be used if a torque wrench cannot be used. After tightening fitting
by hand, put a mark on nut or boss; then tighten special nut or straight
fitting the number of flats shown.
Important: Avoid Damage! Use of alternative
lubricants could cause reduced life of the
component.
Important: Avoid Damage! If operating
temperatures are below -18°C (0°F), you must use
Low Viscosity HY-GARD™ or transmission
damage will occur.
HY-GARD J20C
Low Viscosity HY-GARD J20D