Materials for Inlays, Onlays, Crowns and Bridgeschiseldental
Chisel Dental Clinic was founded by Dr. Sumanth M. Shetty, MDS Pedodontia, from the esteemed Bapuji Dental College, Davangere, Karnataka, India. He is currently serving as assistant professor within Department of Pediatric dentistry, and also is practicing Implantologist after completing his Implant course from one of the prestigious institutions “Nobel Biocare, Sweden.”
Dr. Paul A. Tipton discusses different techniques for preparing teeth for porcelain veneers. For a conventional veneer on the upper right first tooth, preparation involves 0.5mm labial reduction and removing 2mm from the incisal edge. A putty matrix is used as a guide. For a butt joint veneer on the upper right second tooth, the labial surface is reduced by 0.3-0.5mm and 1.5-2mm removed from the incisal edge, which is prepared at a 30 degree angle. Slice preparations are used to address imbrication, rotation, diastemas or missing papillae, reducing the labial surface by 0.3-0
The document provides instructions for preparing tooth LL6 for a porcelain inlay. It details creating 10-15 degree mesial and distal axial wall preparations with an overall convergence angle of 20-30 degrees. It also notes to break contact at the gingival floor, prepare 2mm off any cusps needing capping, and ensure a smooth chamfer margin around the preparation without any steps.
Inlays and onlays / implant dentistry course/ implant dentistry courseIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
This document provides guidelines for preparing class II inlay restorations. It describes initial procedures like evaluating occlusion and administering anesthesia. It discusses preparing the occlusal outline, proximal box, bevels, and flares. Modifications for specific tooth shapes and situations are covered. Preparation variations like slices and flares are explained. Special considerations for abutment teeth and root surface lesions are also summarized. The document provides a thorough overview of class II inlay preparation techniques.
- An inlay is a restoration constructed externally and then cemented into a prepared tooth cavity. An onlay covers one or more cusps and adjoining occlusal surface.
- Indirect restorations like inlays and onlays are used for large restorations, endodontically treated teeth at risk of fracture, and dental rehabilitation with cast metals. They allow for better control of contours compared to direct restorations.
- Disadvantages include requiring more appointments, higher chair time, need for temporary restorations, higher costs, and being more technique sensitive.
Comparison between Direct and Indirect Composite Resin Restorationswaadkhayat
The document summarizes studies comparing direct and indirect composite restorations. Study 1 measured bond strength of direct and indirect composites to dentin, finding indirect composites had lower bond strength. Study 2 evaluated diametral tensile strength of direct and indirect composites cured with different techniques, with results ranging from 32-70MPa. While indirect techniques minimize polymerization shrinkage, properties are still affected by cement type. Direct composites can provide equal or higher properties than indirect if placed carefully following correct indications.
Materials for Inlays, Onlays, Crowns and Bridgeschiseldental
Chisel Dental Clinic was founded by Dr. Sumanth M. Shetty, MDS Pedodontia, from the esteemed Bapuji Dental College, Davangere, Karnataka, India. He is currently serving as assistant professor within Department of Pediatric dentistry, and also is practicing Implantologist after completing his Implant course from one of the prestigious institutions “Nobel Biocare, Sweden.”
Dr. Paul A. Tipton discusses different techniques for preparing teeth for porcelain veneers. For a conventional veneer on the upper right first tooth, preparation involves 0.5mm labial reduction and removing 2mm from the incisal edge. A putty matrix is used as a guide. For a butt joint veneer on the upper right second tooth, the labial surface is reduced by 0.3-0.5mm and 1.5-2mm removed from the incisal edge, which is prepared at a 30 degree angle. Slice preparations are used to address imbrication, rotation, diastemas or missing papillae, reducing the labial surface by 0.3-0
The document provides instructions for preparing tooth LL6 for a porcelain inlay. It details creating 10-15 degree mesial and distal axial wall preparations with an overall convergence angle of 20-30 degrees. It also notes to break contact at the gingival floor, prepare 2mm off any cusps needing capping, and ensure a smooth chamfer margin around the preparation without any steps.
Inlays and onlays / implant dentistry course/ implant dentistry courseIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
This document provides guidelines for preparing class II inlay restorations. It describes initial procedures like evaluating occlusion and administering anesthesia. It discusses preparing the occlusal outline, proximal box, bevels, and flares. Modifications for specific tooth shapes and situations are covered. Preparation variations like slices and flares are explained. Special considerations for abutment teeth and root surface lesions are also summarized. The document provides a thorough overview of class II inlay preparation techniques.
- An inlay is a restoration constructed externally and then cemented into a prepared tooth cavity. An onlay covers one or more cusps and adjoining occlusal surface.
- Indirect restorations like inlays and onlays are used for large restorations, endodontically treated teeth at risk of fracture, and dental rehabilitation with cast metals. They allow for better control of contours compared to direct restorations.
- Disadvantages include requiring more appointments, higher chair time, need for temporary restorations, higher costs, and being more technique sensitive.
Comparison between Direct and Indirect Composite Resin Restorationswaadkhayat
The document summarizes studies comparing direct and indirect composite restorations. Study 1 measured bond strength of direct and indirect composites to dentin, finding indirect composites had lower bond strength. Study 2 evaluated diametral tensile strength of direct and indirect composites cured with different techniques, with results ranging from 32-70MPa. While indirect techniques minimize polymerization shrinkage, properties are still affected by cement type. Direct composites can provide equal or higher properties than indirect if placed carefully following correct indications.
This document shows before and after photos of dental work. There are 6 photos total, with 3 labeled "Before" showing teeth prior to treatment and 3 labeled "After" showing the results of esthetic bonding work on the teeth. The after photos demonstrate how dental bonding can be used to change the color, shape, size or position of teeth for an improved smile.
This document discusses a 39-year-old patient's dental health and silver fillings. X-rays showed no decay on the patient's 3 silver fillings, though slight openings were seen at the edges. However, upon removal, decay was found underneath the fillings in all three teeth, with one tooth fractured through the base. The document warns that silver mercury fillings can cause decay underneath and stress fractures over time, compromising tooth structure, and recommends replacing fillings before symptoms occur to maintain long-term dental health.
This dental document outlines the progress of multiple dental implants and procedures over several visits, including implants #7, #10, #8 and an unspecified implant, with notes made before and after each implant procedure and the completion of an implant crown for tooth #10.
This document shows before and after photos of dental work. There are 6 photos total, with 3 labeled "Before" showing teeth prior to treatment and 3 labeled "After" showing the results of esthetic bonding work on the teeth. The after photos demonstrate how dental bonding can be used to change the color, shape, size or position of teeth for an improved smile.
This document discusses a 39-year-old patient's dental health and silver fillings. X-rays showed no decay on the patient's 3 silver fillings, though slight openings were seen at the edges. However, upon removal, decay was found underneath the fillings in all three teeth, with one tooth fractured through the base. The document warns that silver mercury fillings can cause decay underneath and stress fractures over time, compromising tooth structure, and recommends replacing fillings before symptoms occur to maintain long-term dental health.
This dental document outlines the progress of multiple dental implants and procedures over several visits, including implants #7, #10, #8 and an unspecified implant, with notes made before and after each implant procedure and the completion of an implant crown for tooth #10.