Ijac pdf 11

•

0 likes•16 views

The International Journal of Advances in Chemistry is a peer-reviewed open access journal that addresses the impacts and challenges of chemistry. It publishes practical and theoretical research that contributes to the development of chemistry. Topics include analytical, biological, and physical chemistry as well as materials science, polymers, and computational chemistry. Authors are invited to submit papers through the online submission system by specified deadlines.

Engineering

International Journal of Advances in Chemistry (IJAC)
ISSN : 2455 - 7862
http://airccse.com/ijac/index.html
Scope & Topics
International Journal of Advances in Chemistry (IJAC) is a peer-reviewed, open access
journal, addresses the impacts and challenges of Chemistry. The journal documents practical
and theoretical results which make a fundamental contribution for the development of
Chemistry.
Topics of interest include but are not limited to, the following
 Analytical Chemistry
 Biological Chemistry
 Catalysis / Synthesis
 Environmental Chemistry
 Materials, Polymers & Nanoscience
 Organic Chemistry
 Physical Chemistry / Chemical Physics
 Theoretical and Computational Chemistry
Paper Submission
Authors are invited to submit papers for this journal through Submission System . Submissions
must be original and should not have been published previously or be under consideration for
publication while being evaluated for this Journal. For paper format download the template in this
page
Important Dates
 Submission Deadline ; November 07, 2020
 Notification :December 07, 2020
 Final Manuscript Due : December 15, 2020
 Publication Date : Determined by the Editor-in-Chief
Contact Us
Here's where you can reach us : ijrcjournal@yahoo.com or ijrcjournal@airccse.com

 Analytical Chemistry
Analytical Chemistry
Analytical Chemistry
Biological Chemistry
Catalysis / Synthesis
Environmental Chemistry
Materials, Polymers

What's hot

International Journal of Advances in Biology (IJAB)

ijabjournal

Analytical & Bioanalytical Techniques

OMICS Group | International Science Conferences

International Journal of Advances in Biology (IJAB)

ijabjournal

June 9 2017 Panel 4 Russell Thomas

Chemicals Forum Association

Bioscience & Engineering: An International Journal (BIOEJ) is a peer-reviewed, open access journal that addresses the impacts and challenges of Bioscience, Bioengineering and Applications. The journal documents practical and theoretical results which make a fundamental contribution for the development of Bioscience & Engineering. This journal aims to bring together researchers and practitioners in all Bioscience & Engineering aspects, including (but not limited to)

CALL FOR ARTICLES - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

New all jounral call for papers

Journalijarbs12

PAPER SUBMISSION START NOW - Bioscience & Engineering: An International Journ...

bioejjournal

PAPER SUBMISSION - JANUARY ISSUE - Bioscience & Engineering: An International...

bioejjournal

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

SUBMIT YOUR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

HCF 2019 Panel 5: Nicolas Ball

Chemicals Forum Association

JANUARY ISSUE - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

SUBMIT YOUR ARTICLES - Bioscience & Engineering: An International Journal (BI...

bioejjournal

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

HCF 2019 Panel 5: Mike Rasenberg

Chemicals Forum Association

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

What's hot (18)

International Journal of Advances in Biology (IJAB)

Analytical & Bioanalytical Techniques

International Journal of Advances in Biology (IJAB)

June 9 2017 Panel 4 Russell Thomas

CALL FOR ARTICLES - Bioscience & Engineering: An International Journal (BIOEJ)

New all jounral call for papers

PAPER SUBMISSION START NOW - Bioscience & Engineering: An International Journ...

PAPER SUBMISSION - JANUARY ISSUE - Bioscience & Engineering: An International...

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

SUBMIT YOUR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

HCF 2019 Panel 5: Nicolas Ball

JANUARY ISSUE - Bioscience & Engineering: An International Journal (BIOEJ)

SUBMIT YOUR ARTICLES - Bioscience & Engineering: An International Journal (BI...

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

HCF 2019 Panel 5: Mike Rasenberg

CALL FOR PAPERS - Bioscience & Engineering: An International Journal (BIOEJ)

Bioscience & Engineering: An International Journal (BIOEJ)

Similar to Ijac pdf 11

Wiley Journal Citation Report (Physical Sciences)

Wiley

International Journal of Recent advances in Physics (IJRAP)

ijrap

International Journal of Recent advances in Physics (IJRAP)

ijp2p

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

pbij

International Journal of Recent advances in Physics (IJRAP)

ijrap

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

pbij

Pharmaceutical and biomedical sciences: An International Journal (PBIJ) is a Quarterly peer-reviewed and refereed open access journal that publishes articles which contribute new results in all areas of the Pharmaceutical and Biomedical sciences. The journal is devoted to the publication of high quality papers on theoretical and practical aspects of Pharmaceutical and Biomedical sciences. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus Pharmaceutical and Biomedical sciences advancements, and establishing new collaborations in these areas. Original research papers, state-of-the-art reviews are invited for publication in all areas of Pharmaceutical and Biomedical sciences.

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

pbij

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

pbij

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

Ijmech

ijmech

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

Bioscience & Engineering: An International Journal (BIOEJ)

bioejjournal

International Journal of Recent advances in Mechanical Engineering (IJMECH) is a peer-reviewed, open access journal that addresses the impacts and challenges of Mechanical Engineering. The journal documents practical and theoretical results which make a fundamental contribution for the development of Mechanical Engineering. This journal aims to bring together researchers and practitioners in all Mechanical Engineering aspects, including (but not limited to):

International Journal of Recent advances in Mechanical Engineering (IJMECH)

ijmech

International Journal of Recent advances in Mechanical Engineering (IJMECH)

ijmech

Similar to Ijac pdf 11 (15)

Wiley Journal Citation Report (Physical Sciences)

International Journal of Recent advances in Physics (IJRAP)

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

International Journal of Recent advances in Physics (IJRAP)

Pharmaceutical and Biomedical sciences: An International Journal (PBIJ)

Bioscience & Engineering: An International Journal (BIOEJ)

Ijmech

Bioscience & Engineering: An International Journal (BIOEJ)

International Journal of Recent advances in Mechanical Engineering (IJMECH)

More from ijac123

Pollution resulting from unsustainable agricultural and urbanization activities in the Ruhezamyenda and Bunyonyi catchments are threatening lake Bunyonyi. These have led to high chemical oxygen demand (COD), electrical conductivity, turbidity, pH, iron (II) concentration and low dissolved oxygen (DO5). In this study we have investigated the how COD, turbidity, pH, concentration of iron, total suspended solids, total nutrients and DO5 of water changed with distance in lake. Water sampled from different distances in the lake filtered using Whatman paper at ambient temperatures was tested for COD, electrical conductivity, turbidity, total nutrients, iron, hardness and DO5. COD was 20.8±.0.03mg/L to 16 ± 0.03mg/L; total hardness was 16.5±0.2 mg/L to 18.6 ± 0.3 mg/L total nitrate was 103.5± 2 mg/L to 88 ± 3 mg/L; total phosphate was 100.8 ±.2.5 to 87± 3 mg/L; high TSS values from 3.4 ± 0.1 mg/L to 2.5 ± 0.1 mg/L showed contamination of water. As pH decreased from 8.3 ± 0.03 to 7.6 ± 0.04 revealed that bases were getting removed. The turbidity dropped from 25.7 ± 0.3 NTU to 20 ± 2 NTU due settling down of sediments. Iron (II) concentration ranging from 1.1± 0.1 to 0.8± 0.1 mgL-1 . Dissolved oxygen decreased from 7.9 ±0.3 mg/L to 4.8 ± 0.2 mg/L indicating surface water can uphold life of aquatic organisms. Total hardness ranged from 0.22± 0.05 to 0.19± 0.05 mg/L Electrical conductivity was high and ranged from 130± 5 to 150± 5 µS/cm indicating presence of electrolytes. Lake Bunyonyi water is not greatly polluted, but requires to be safe guarded against poor unsustainable agricultural practices, sewage draining from towns, schools and hotels in nearby settlements.

HOW PHYSICOCHEMICAL PARAMETERS OF WATER CHANGE WITH DISTANCE IN A LAKE: CASE ...

ijac123

HPLC method is developed and validated for determination of three pesticides (abamectin, imidacloprid, and β-cyfluthrin) in water. These pesticides are used widely in agriculture for crops protection, and may be leached to the groundwater. Reversed-phase method with C18 column (5 µm, 250mm × 4.6 mm inner diameter) using a mobile phase consisting of acetonitrile/water (v:v = 4:1) at a flow rate of 1.5 mL/min and UV detection at 220 nm was used. This method is validated according to new methods which include accuracy, precision, linearity and range, limit of detection and limit of quantitation. The current method exhibits good linearity over the range of 1-1000 ppb for abamectin, 0.5-1000 ppb for imidacloprid, and 0.4-1000 ppb for ß-cyfluthrin with r2 greater than 0.990. The percentage recovery of the method at three concentration levels (5, 100, and 1000 ppb) is within 97.6 to 101.5% for the three pesticides. Relative standard deviation of the area of six replicate injections of each pesticide at three concentration levels (5.0, 100.0, and 1000.0 ppb) was found to be less than 1% which reflect the precision of the method. Limit of quantitation of the three pesticides using this method is low (1.0, 0.5, and 0.4 ppb) for abamectin, imidacloprid, and β-cyfluthrin, respectively which enables the determination of these three pesticides in water at low concentration levels

A HPLC-UV METHOD FOR DETEERMINATION OF THREE PESTICIDES IN WATER

ijac123

This paper shows modeling of highly nonlinear polymerization process using the artificial neural network approach for the model predictive purposes. Polymerization occurs in a fluidized bed polypropylene reactor using Ziegler - Natta catalyst and the main objective was modeling of the reactor production rate. The data set used for an identification of the model is a real process data received from an existing polypropylene plant and the identified model is a nonlinear autoregressive neural network with the exogenous input. Performance of a trained network has been verified using the real process data and the ability of the production rate prediction is shown in the conclusion.

ARTIFICIAL NEURAL NETWORK APPROACH TO MODELING OF POLYPROPYLENE REACTOR

ijac123

5th International Conference on Chemical Engineering (CHEME 2021) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications impacts and challenges of Chemical Engineering. The conference documents practical and theoretical results which make a fundamental contribution for the development of Chemical Engineering. The aim of the conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development in the field. Original research papers, state-of-the-art reviews are invited for publication in all areas Chemical Engineering.Authors are solicited to contribute to the conference by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in the following areas, but are not limited to.

5th International Conference on Chemical Engineering (CHEME 2021)

ijac123

8th International Conference on Advanced Computing (ADCO 2021) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of Computing. The Conference looks for significant contributions to all major fields of the Computer Science and Information Technology in theoretical and practical aspects. The aim of the conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development in the field. Authors are solicited to contribute to the conference by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in the following areas, but are not limited to

8th International Conference on Advanced Computing (ADCO 2021)

ijac123

5th International Conference on Chemical Engineering (CHEME 2021)

ijac123

With increasing industrialization, rapid economic development, and an ever-growing population, the problem of water pollution and water scarcity is increasing at an alarming rate. It is estimated that more than 800,000 annual diarrheal deaths are attributed to unsafe water usage. Furthermore, traditional wastewater treatment technologies, such as adsorption, chlorination, and biochemical methods are difficult to utilize for treating wastewater at low concentration for they lead to high toxicity. However, Nano TiO2-based photocatalytic technology is a new highefficiency and energy-saving alternative because NanoTiO2 can degrade organic pollutants into non-toxic compounds such as CO2 and H2O under the sunlight. Nonetheless, separating and recycling Nano TiO2 from water remains to be a huge challenge. Therefore, we prepared PVA-Nano TiO2 foam at high speed stirring, film laying, drying, and thermal crosslinking to embed in PVA for reuse and recycle. The morphology, structure, and photocatalytic performance of PVA-Nano TiO2 foam were characterized in detail by SEM, TGA, FTIR, UV-Vis, and so on. The results show the cell size of the foam is about 0.2-0.5 mm, and the swelling degree of PVA-Nano TiO2 foam is about 600%. The TiO2 nanoparticles also have no effect on thermal crosslinking of PVA. Under sunlight, the PVA-Nano TiO2 foam possesses photocatalytic activity that is higher than that of non-porous PVANano TiO2 film due to the higher permeability of water and impurity with higher porosity. In addition, the PVANano TiO2 foam exhibits good reusability under multi-cycle use. Thus, this novel design of PVA-Nano TiO2 foam is simple, eco-friendly, and effective with potential practical application value.

PREPARATION OF REUSABLE PVA-NANO TIO2 FOAM FOR WASTEWATER TREATMENT

ijac123

In order to prepare a high quality glass with high water resistance, we investigated chromium iron phosphate glass because of its improved chemical durability. The introduction of chromium in sodiumiron-phosphate glasses is used to compare its effect with iron in inhibition of corrosion. The sodiumchromium-iron phosphate glass of composition 30Fe2O3-xCr2O3-(15-x)Na2O-55P2O5 (mol %),with (0≤x≤4) was produced by melting batches of (99,98% pure) Cr2O3, Fe2O3, Na2CO3, and (NH4)2HPO4 at 1080°C for one hour and pouring the liquid into the bench. The sample was annealed at 650°C for 48h. We have performed the measurement of X-Ray diffraction, and Infra Red spectroscopy. The chemical durability was evaluated by weight losses of glass samples after immersion in hot distilled water (90°C) for 30 days. Weight loss measurements showed a good chemical durability unlike borosilicate glass.

CHEMICAL DURABILITY AND CHARACTERIZATION OF THE PHOSPHATE GLASSES CONTAINING ...

ijac123

FIBER OPTIC AIDED SPECTROPHOTOMETRIC DETERMINATION OF GADOLINIUM IN FBR REPRO...

ijac123

The E-51 epoxy resin was modified by PTMG toughener. The resin was cured under high temperature, with methyl tetrahydrophthalic anhydride (MeTHPA) as the curing agent and 2,4,6- Tris(dimethylaminomethyl)phenol (DMP-30) as the curing accelerator. Dynamic Mechanic Analysis data shows that PTMG significantly reduced the glass transition temperature of cured material. Impact strength test results shows that the presence of PTMG in the cured material increased its impact strength. The maximum impact strength was achieved while the mass fraction of PTMG is 12%. Tensile strength, tensile modulus, flexural strength, and flexural modulus data indicates that the while the mass fraction was smaller than the valve value, PTMG increased the cured material’s tensile and flexural strength as well as its tensile and flexural modulus. While the mass fraction of PTMG was larger than the valve value, the increase of the mass fraction of PTMG reduced the cured material’s strength and modulus.

STUDY ON THE PROPERTIES OF PTMG TOUGHENER MODIFIED EPOXY RESINS

ijac123

REMOVAL OF TOXIC CHEMICALS AND BIOLOGICAL POLLUTANTS FROM GROUNDWATER WELLS U...

ijac123

Mono and bi-organometallic complexes of Cu(II), Ni(II), Mn(II), Zn(II) and Ag(I) complexes with oxaloamide ligand has much potential as therapeutic and diagnostic agents. The ligand allows the thermodynamic and kinetic reactivity of the metal ion to be controlled and also provide a scaffold for functionalization. Specific examples involving the design of metal complexes as anticancer agents are discussed. These complexes have been synthesized and characterized by (1H-NMR, mass, IR, UV-VIS, ESR) spectra, magnetic moments and conductance measurements, elemental and thermal analyses. Molar conductances in DMF solution indicates that, the complexes are non-electrolytes. The ESR spectra of solid Cu(II) complexes (2-5) show an axial type indicating a d(X2-y2) ground state with a significant covalent bond character. However, Mn(II) complex(9), shows an isotropic type indicating an octahedral geometry. Cytotoxic evolution IC50 of the ligand and its complexes have been carried out. Cu(II) Complexes show enhanced activity in comparison to the parent ligand or standard drug. Copper is enriched in various human cancer tissues and is a co-factor essential for tumor angiogenesis processes. However, the use of copper binding ligand to target tumor, copper could provide a novel strategy for cancer selective treatment.

METALLO - BIOACTIVE COMPOUNDS AS POTENTIAL NOVEL ANTICANCER THERAPY

ijac123

Water pollution is one of the most important environmental problems in the world. In developing countries, contaminated water has frequently caused water diseases. Today, water borne toxic chemicals (anions and heavy metal ions) and biological pollutants pose a great threat to the safety of water supplies. Currently, the quality of groundwater with respect to pollutants is of great concern. Modified Downflow Hanging Sponge (DHS) reactor will be a good groundwater treatment technology in the near future, it is used for excellent removal of heavy metals, anions, organic pollutants and harmful microbes, and also the reactor has advantages like low cost, easy to apply and satisfaction level. In order to achieve these objectives, treatment scheme has been investigated. It consists of mixing organic chelator with impure groundwater in different concentrations followed by a downflow hanging sponge (DHS) reactor. In the presence of 0.5 g/L of the chelator, the average removal of total NO3 and NO2 and (total dissolved solids) TDS are respectively 72%, 62% and 75%. The results show that, when Cd treated with chelator, the amount decreases from 0.0063 to 0.0 mgL-1 (100%) after 1 h, Cu decreases from 0.0023 to 0.0 mgL-1 (100%) after 1 h, Fe decreases from 0.4 to 0.0 mgL-1 (100%) after 1 h, Mn decreases from 0.3 to 0.0 mgL-1 (100%) after 1 h and Zn decreases from 0.012 to 0.0 mgL-1 (100%) after 1 h. Also, the results show removal of fecal coliform . Decreased from 50 to 0 and the overall removal efficiency of fecal coliform is (100%).

REMOVAL OF TOXIC CHEMICALS AND BIOLOGICAL POLLUTANTS FROM GROUNDWATER WELLS U...

ijac123

More from ijac123 (13)