This document contains performance benchmark results for IBM Power Systems servers running AIX, IBM i and Linux operating systems. Section 1 provides SPEC CPU2006 benchmark scores for POWER7, POWER6 and POWER5 systems. Section 2 discusses multi-user performance benchmarks including rPerf, SPEC CPU2006 and SPEC CPU2000 for AIX systems. The document contains over a dozen additional sections reporting on other application and operating system benchmarks.
This document contains performance and benchmark results for IBM servers and workstations running the UNIX® (AIX®), IBM i and Linux® operating systems. This includes the IBM Power™ Systems servers, IBM PowerLinux (System p™, System p5™, eServer™ p5, pSeries®, OpenPower® and IBM RS/6000®; BladeCenter® Power Architecture® technology-based blades) and IntelliStation® POWER™ workstations.
This document contains performance results for systems based on the POWER processor through January 2016.
The document provides specifications, repair methods, and settings for Renault vehicles. It details lifting points, towing attachment locations, lubricants, fluid capacities and grades, tension settings, and other technical information. The repair methods are based on current specifications but may be modified by the manufacturer. All copyrights are reserved by Renault and copying or sharing the document requires written permission.
Slides from the APAC Groundbreakers Tour from Perth and Melbourne legs. This session covered the features in 18c, 19c and 20c, along with the new free database offerings from Oracle from OpenWorld 2019
This document provides safety instructions and maintenance procedures for servicing a Bobcat skid-steer loader. It lists various components of the loader and provides instructions on maintaining safety when servicing parts like the engine, hydraulic and electrical systems. Specific instructions are given for proper lifting, blocking and supporting of the loader during maintenance.
This document discusses network configuration and diagnostic tools in Linux. It describes how to view interface configuration and address information using ifconfig and ip addr show. It also covers changing IP and route settings persistently in configuration files and using ifup/ifdown. Tools like ping and traceroute are presented for network diagnostics.
Limitorque MX Electronic Actuator User Instructions Maintenance Spare PartsSwanson Flo
This document provides instructions for maintenance and repair of Limitorque MX series electronic actuators. It describes the various subassemblies that comprise the actuator, including mechanical components like the motor, declutch, and handwheel, as well as electronic assemblies such as the control module and encoder. Procedures are provided for removing and remounting each subassembly to allow for inspection, repair, or replacement of parts. Recommendations are also given for recommended spare parts to have on hand for maintenance needs.
Bobcat 763 skid steer loader service repair manual instant download ( sn 5124...ufjjsjekkemmme
This service manual provides maintenance and repair information for Bobcat loaders with the listed serial numbers. It contains numerous warnings about the importance of following safety procedures when servicing equipment to avoid injury. The manual consists of sections covering various components in alphabetical order to aid in maintenance, service and repair.
This document contains performance and benchmark results for IBM servers and workstations running the UNIX® (AIX®), IBM i and Linux® operating systems. This includes the IBM Power™ Systems servers, IBM PowerLinux (System p™, System p5™, eServer™ p5, pSeries®, OpenPower® and IBM RS/6000®; BladeCenter® Power Architecture® technology-based blades) and IntelliStation® POWER™ workstations.
This document contains performance results for systems based on the POWER processor through January 2016.
The document provides specifications, repair methods, and settings for Renault vehicles. It details lifting points, towing attachment locations, lubricants, fluid capacities and grades, tension settings, and other technical information. The repair methods are based on current specifications but may be modified by the manufacturer. All copyrights are reserved by Renault and copying or sharing the document requires written permission.
Slides from the APAC Groundbreakers Tour from Perth and Melbourne legs. This session covered the features in 18c, 19c and 20c, along with the new free database offerings from Oracle from OpenWorld 2019
This document provides safety instructions and maintenance procedures for servicing a Bobcat skid-steer loader. It lists various components of the loader and provides instructions on maintaining safety when servicing parts like the engine, hydraulic and electrical systems. Specific instructions are given for proper lifting, blocking and supporting of the loader during maintenance.
This document discusses network configuration and diagnostic tools in Linux. It describes how to view interface configuration and address information using ifconfig and ip addr show. It also covers changing IP and route settings persistently in configuration files and using ifup/ifdown. Tools like ping and traceroute are presented for network diagnostics.
Limitorque MX Electronic Actuator User Instructions Maintenance Spare PartsSwanson Flo
This document provides instructions for maintenance and repair of Limitorque MX series electronic actuators. It describes the various subassemblies that comprise the actuator, including mechanical components like the motor, declutch, and handwheel, as well as electronic assemblies such as the control module and encoder. Procedures are provided for removing and remounting each subassembly to allow for inspection, repair, or replacement of parts. Recommendations are also given for recommended spare parts to have on hand for maintenance needs.
Bobcat 763 skid steer loader service repair manual instant download ( sn 5124...ufjjsjekkemmme
This service manual provides maintenance and repair information for Bobcat loaders with the listed serial numbers. It contains numerous warnings about the importance of following safety procedures when servicing equipment to avoid injury. The manual consists of sections covering various components in alphabetical order to aid in maintenance, service and repair.
Installation instructions for retrofitting a cruise control regulator in the ...degarden
1) The document provides installation instructions for retrofitting a cruise control regulator in Volkswagen Golf IV, Bora, and Variant models, which requires disconnecting the battery, removing the steering wheel assembly, and installing a new directional indicator switch and wiring harness.
2) The cruise control system is activated using vehicle diagnostic tool VAS 5051 by entering diagnostic mode, interrogating the error log, accessing the login procedure, and entering a code number.
3) After coding and installation, a test drive is required to check proper cruise control system function such as switching off with the brake or clutch pedal.
Installation instructions for retrofitting a cruise control regulator in the ...degarden
Installation instructions for retrofitting
a cruise control regulator in the Golf IV Golf IV Variant TDi petrol engine with
electronic throttle control (E-Gas), Bora Bora Variant TDi petrol engine with
electronic throttle control (E-Gas)
The document discusses various concepts related to the OSEK operating system including conformance classes, hook routines, shared resources, and mutual exclusion. Specifically, it covers:
1) OSEK defines 4 conformance classes to support systems with different capacities and demands.
2) Hook routines allow user-defined functions to be called at specific points during OS operation, such as startup, shutdown, before/after tasks.
3) Shared resources must be accessed exclusively to prevent data corruption, and mutual exclusion techniques like mutexes and semaphores are used to serialize access.
Flowserve Limitorque L120-85 Electric Actuator IOMSwanson Flo
Whether used with gate valves, globe valves, penstocks or
sluice gates, versatile L120 Series actuators operate without
modification in any rising or non-rising stem application for
linear-action valves.
This Installation and Maintenance Manual explains how to install and maintain the L120-85 actuator. Information is provided for installation, disassembly, reassembly, lubrication, and parts selection.
This document contains a list of package names and versions for software that is likely part of a Linux distribution. There are over 200 packages listed ranging from core system packages like GConf2 and ORBit2 to specific language spell checkers and printer drivers. The packages are for the x86_64 architecture and the Mandriva Linux 2011 distribution.
John deere 3 164 d oem engine service repair manualfjjsieskekfmmse
This document provides an overview and index of sections contained in a technical manual for 300 Series OEM Engines. It includes:
- A table of contents outlining the main sections and groups covered in the manual, such as the engine, electrical systems, sheet metal, and system testing.
- An introduction explaining how technical manuals and fundamentals of service manuals work together to provide service information.
- An alphabetical index listing components, systems, and procedures covered in the manual to aid in locating specific information.
- Additional general information such as accessible hardware torque values and an explanation of head markings on bolts and cap screws.
IBM Power Systems provides powerful servers for businesses. The document highlights IBM's Power7 and Power6 servers, which offer high performance, energy efficiency, and consolidation capabilities. IBM has seen success migrating customers from other vendors' systems to Power servers. Analysts note IBM's leadership in the UNIX server market and the strong performance of Power7 compared to competitors' offerings.
Post DJ Stenting Renal artery pseudoaneurysm- Glue embolisation doneguestd40ac3
35 yrs Male patient
K/c/o Hemophilia
Known case right renal calculi for which DJ stenting was done. following DJ stenting Presented with persistent Hematuria
Post DJ Stenting Renal artery pseudoaneurysm- Glue embolisation done
MST - Malattie sessualmente trasmesse - Piccolo Manuale - Provincia di Romavideo_roma
Un magazine rivolto agli studenti delle superiori per dare informazioni sull' Aids e le malattie sessualmente trasmesse e per dare spunti di riflessione per una sessualità consapevole.
Microphones are transducers that convert sound energy into electrical signals. There are two main types: dynamic and condenser microphones. Dynamic microphones have a simple design without needing power, making them durable for high volumes. Condenser microphones require power but produce stronger signals and are more sensitive, suited for subtle sounds. Microphone directionality depends on their polar pattern, being either omnidirectional, unidirectional, or bidirectional in capturing sound from different angles.
The document provides instructions on how to add and subtract monomials. It defines key terms like coefficient, base, exponent, degree of a monomial, degree of a polynomial, and like terms. It explains that to add monomials, you add the coefficients and keep the base, and to subtract monomials you subtract the coefficients and keep the base. Examples are given of simplifying expressions by combining like terms.
1. A veterinarian's rule is that 1 year of a dog's life is equivalent to 7 years of human life.
2. If a dog is 6 years old, its equivalent human age is 6 * 7 = 42 years.
3. To find the equivalent human age of a dog that is 10 years old, multiply the dog's age by 7. So a 10 year old dog's equivalent human age is 10 * 7 = 70 years.
This chapter describes the memory and input/output mapping of the Microfriend Dyna-85 single board computer. It discusses the memory mapping including RAM, EPROM and expansion memory. It also covers the input/output mapping of the parallel and serial interfaces. The power supply requirements are briefly mentioned.
This document provides an engineering manual for a sectional drive standard for paper and coating machines. It describes the hardware configuration using Siemens S7-400 CPUs and communication boards. It then details the software organization, including the structure of control flow charts (CFC) and the functions and objects used, such as reading inputs/outputs, central control, machine speed reference, drive control, unwinder/rewinder control, and load sharing. Engineering details are also covered, such as chart structure, configuration, interconnections, run sequences, webbreak curves, and operator interface configuration.
The document discusses ICP DAS' PAC (programmable automation controller) products. It describes several PAC families including the XP, WinPAC, LinPAC, and iPAC series which come with different operating systems like WES, Windows CE, and Linux. It also covers the μPAC-5000, 7188/7186, and WP-5000 series. The PACs provide I/O expansion through onboard slots or remote I/O modules and offer software development tools like VS.NET and ISaGRAF. The document also mentions ICP DAS' panel products, remote I/O modules, industrial communication products, wireless solutions, motion automation solutions, accessories, and energy management solutions.
The document provides an introduction to technical notes on the EEC-IV engine control unit. It discusses the purpose of understanding and modifying the EEC-IV so it can be reprogrammed. It encourages joining mailing lists focused on understanding EEC electronics to share knowledge. It also acknowledges many contributors who have helped share technical information about the EEC-IV.
This document provides an introduction to technical notes on the EEC-IV engine control module used in some Ford vehicles. It discusses the purpose of understanding the EEC-IV system and how information is being collected from various sources. It also provides an overview of the hardware components including the microprocessor and memory chips used in the EEC-IV system. Tables are included that list mailing lists, documentation revisions, component part numbers and specifications.
This document provides instructions for installing and using Festo's IPC FEC-Standard programmable logic controller. It describes the various module variants and components, mounting instructions, wiring diagrams, and basic programming and commissioning steps. Sections include an overview of the module components, guidelines for mounting the modules, pin assignments for the connectors, examples for wiring inputs, outputs and networks, and steps for creating initial programs using Festo programming software.
The document provides steps to upgrade the IOS image and field programmable device (FPD) images on a Cisco 7206 router. The steps include deleting old image files, copying new IOS and FPD images via TFTP, verifying the image checksums, setting the boot configuration to use the new IOS image, and rebooting the router to complete the upgrade. Checks are also provided to confirm the VSA card and other modules are functioning after the upgrade.
Installation instructions for retrofitting a cruise control regulator in the ...degarden
1) The document provides installation instructions for retrofitting a cruise control regulator in Volkswagen Golf IV, Bora, and Variant models, which requires disconnecting the battery, removing the steering wheel assembly, and installing a new directional indicator switch and wiring harness.
2) The cruise control system is activated using vehicle diagnostic tool VAS 5051 by entering diagnostic mode, interrogating the error log, accessing the login procedure, and entering a code number.
3) After coding and installation, a test drive is required to check proper cruise control system function such as switching off with the brake or clutch pedal.
Installation instructions for retrofitting a cruise control regulator in the ...degarden
Installation instructions for retrofitting
a cruise control regulator in the Golf IV Golf IV Variant TDi petrol engine with
electronic throttle control (E-Gas), Bora Bora Variant TDi petrol engine with
electronic throttle control (E-Gas)
The document discusses various concepts related to the OSEK operating system including conformance classes, hook routines, shared resources, and mutual exclusion. Specifically, it covers:
1) OSEK defines 4 conformance classes to support systems with different capacities and demands.
2) Hook routines allow user-defined functions to be called at specific points during OS operation, such as startup, shutdown, before/after tasks.
3) Shared resources must be accessed exclusively to prevent data corruption, and mutual exclusion techniques like mutexes and semaphores are used to serialize access.
Flowserve Limitorque L120-85 Electric Actuator IOMSwanson Flo
Whether used with gate valves, globe valves, penstocks or
sluice gates, versatile L120 Series actuators operate without
modification in any rising or non-rising stem application for
linear-action valves.
This Installation and Maintenance Manual explains how to install and maintain the L120-85 actuator. Information is provided for installation, disassembly, reassembly, lubrication, and parts selection.
This document contains a list of package names and versions for software that is likely part of a Linux distribution. There are over 200 packages listed ranging from core system packages like GConf2 and ORBit2 to specific language spell checkers and printer drivers. The packages are for the x86_64 architecture and the Mandriva Linux 2011 distribution.
John deere 3 164 d oem engine service repair manualfjjsieskekfmmse
This document provides an overview and index of sections contained in a technical manual for 300 Series OEM Engines. It includes:
- A table of contents outlining the main sections and groups covered in the manual, such as the engine, electrical systems, sheet metal, and system testing.
- An introduction explaining how technical manuals and fundamentals of service manuals work together to provide service information.
- An alphabetical index listing components, systems, and procedures covered in the manual to aid in locating specific information.
- Additional general information such as accessible hardware torque values and an explanation of head markings on bolts and cap screws.
IBM Power Systems provides powerful servers for businesses. The document highlights IBM's Power7 and Power6 servers, which offer high performance, energy efficiency, and consolidation capabilities. IBM has seen success migrating customers from other vendors' systems to Power servers. Analysts note IBM's leadership in the UNIX server market and the strong performance of Power7 compared to competitors' offerings.
Post DJ Stenting Renal artery pseudoaneurysm- Glue embolisation doneguestd40ac3
35 yrs Male patient
K/c/o Hemophilia
Known case right renal calculi for which DJ stenting was done. following DJ stenting Presented with persistent Hematuria
Post DJ Stenting Renal artery pseudoaneurysm- Glue embolisation done
MST - Malattie sessualmente trasmesse - Piccolo Manuale - Provincia di Romavideo_roma
Un magazine rivolto agli studenti delle superiori per dare informazioni sull' Aids e le malattie sessualmente trasmesse e per dare spunti di riflessione per una sessualità consapevole.
Microphones are transducers that convert sound energy into electrical signals. There are two main types: dynamic and condenser microphones. Dynamic microphones have a simple design without needing power, making them durable for high volumes. Condenser microphones require power but produce stronger signals and are more sensitive, suited for subtle sounds. Microphone directionality depends on their polar pattern, being either omnidirectional, unidirectional, or bidirectional in capturing sound from different angles.
The document provides instructions on how to add and subtract monomials. It defines key terms like coefficient, base, exponent, degree of a monomial, degree of a polynomial, and like terms. It explains that to add monomials, you add the coefficients and keep the base, and to subtract monomials you subtract the coefficients and keep the base. Examples are given of simplifying expressions by combining like terms.
1. A veterinarian's rule is that 1 year of a dog's life is equivalent to 7 years of human life.
2. If a dog is 6 years old, its equivalent human age is 6 * 7 = 42 years.
3. To find the equivalent human age of a dog that is 10 years old, multiply the dog's age by 7. So a 10 year old dog's equivalent human age is 10 * 7 = 70 years.
This chapter describes the memory and input/output mapping of the Microfriend Dyna-85 single board computer. It discusses the memory mapping including RAM, EPROM and expansion memory. It also covers the input/output mapping of the parallel and serial interfaces. The power supply requirements are briefly mentioned.
This document provides an engineering manual for a sectional drive standard for paper and coating machines. It describes the hardware configuration using Siemens S7-400 CPUs and communication boards. It then details the software organization, including the structure of control flow charts (CFC) and the functions and objects used, such as reading inputs/outputs, central control, machine speed reference, drive control, unwinder/rewinder control, and load sharing. Engineering details are also covered, such as chart structure, configuration, interconnections, run sequences, webbreak curves, and operator interface configuration.
The document discusses ICP DAS' PAC (programmable automation controller) products. It describes several PAC families including the XP, WinPAC, LinPAC, and iPAC series which come with different operating systems like WES, Windows CE, and Linux. It also covers the μPAC-5000, 7188/7186, and WP-5000 series. The PACs provide I/O expansion through onboard slots or remote I/O modules and offer software development tools like VS.NET and ISaGRAF. The document also mentions ICP DAS' panel products, remote I/O modules, industrial communication products, wireless solutions, motion automation solutions, accessories, and energy management solutions.
The document provides an introduction to technical notes on the EEC-IV engine control unit. It discusses the purpose of understanding and modifying the EEC-IV so it can be reprogrammed. It encourages joining mailing lists focused on understanding EEC electronics to share knowledge. It also acknowledges many contributors who have helped share technical information about the EEC-IV.
This document provides an introduction to technical notes on the EEC-IV engine control module used in some Ford vehicles. It discusses the purpose of understanding the EEC-IV system and how information is being collected from various sources. It also provides an overview of the hardware components including the microprocessor and memory chips used in the EEC-IV system. Tables are included that list mailing lists, documentation revisions, component part numbers and specifications.
This document provides instructions for installing and using Festo's IPC FEC-Standard programmable logic controller. It describes the various module variants and components, mounting instructions, wiring diagrams, and basic programming and commissioning steps. Sections include an overview of the module components, guidelines for mounting the modules, pin assignments for the connectors, examples for wiring inputs, outputs and networks, and steps for creating initial programs using Festo programming software.
The document provides steps to upgrade the IOS image and field programmable device (FPD) images on a Cisco 7206 router. The steps include deleting old image files, copying new IOS and FPD images via TFTP, verifying the image checksums, setting the boot configuration to use the new IOS image, and rebooting the router to complete the upgrade. Checks are also provided to confirm the VSA card and other modules are functioning after the upgrade.
Siemens cp 242-8 as-interface master profibus-dp slaveDien Ha The
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
The motherboard supports Intel Celeron and Pentium III processors with front side bus speeds of 66MHz, 100MHz, and 133MHz. It has three DIMM slots supporting up to 1GB of SDRAM memory. Expansion slots include one 32-bit AGP slot and three 32-bit PCI slots. Additional features include onboard audio, LAN, USB, serial, parallel, and floppy disk connectors.
Kernel Recipes 2017 - Performance analysis Superpowers with Linux BPF - Brend...Anne Nicolas
The in-kernel Berkeley Packet Filter (BPF) has been enhanced in recent kernels to do much more than just filtering packets. It can now run user-defined programs on events, such as on tracepoints, kprobes, uprobes, and perf_events, allowing advanced performance analysis tools to be created. These can be used in production as the BPF virtual machine is sandboxed and will reject unsafe code, and are already in use at Netflix.
Beginning with the bpf() syscall in 3.18, enhancements have been added in many kernel versions since, with major features for BPF analysis landing in Linux 4.1, 4.4, 4.7, and 4.9. Specific capabilities these provide include custom in-kernel summaries of metrics, custom latency measurements, and frequency counting kernel and user stack traces on events. One interesting case involves saving stack traces on wake up events, and associating them with the blocked stack trace: so that we can see the blocking stack trace and the waker together, merged in kernel by a BPF program (that particular example is in the kernel as samples/bpf/offwaketime).
This talk will discuss the new BPF capabilities for performance analysis and debugging, and demonstrate the new open source tools that have been developed to use it, many of which are in the Linux Foundation iovisor bcc (BPF Compiler Collection) project. These include tools to analyze the CPU scheduler, TCP performance, file system performance, block I/O, and more.
Brendan Gregg, Netflix
Kernel Recipes 2017: Performance Analysis with BPFBrendan Gregg
Talk by Brendan Gregg at Kernel Recipes 2017 (Paris): "The in-kernel Berkeley Packet Filter (BPF) has been enhanced in recent kernels to do much more than just filtering packets. It can now run user-defined programs on events, such as on tracepoints, kprobes, uprobes, and perf_events, allowing advanced performance analysis tools to be created. These can be used in production as the BPF virtual machine is sandboxed and will reject unsafe code, and are already in use at Netflix.
Beginning with the bpf() syscall in 3.18, enhancements have been added in many kernel versions since, with major features for BPF analysis landing in Linux 4.1, 4.4, 4.7, and 4.9. Specific capabilities these provide include custom in-kernel summaries of metrics, custom latency measurements, and frequency counting kernel and user stack traces on events. One interesting case involves saving stack traces on wake up events, and associating them with the blocked stack trace: so that we can see the blocking stack trace and the waker together, merged in kernel by a BPF program (that particular example is in the kernel as samples/bpf/offwaketime).
This talk will discuss the new BPF capabilities for performance analysis and debugging, and demonstrate the new open source tools that have been developed to use it, many of which are in the Linux Foundation iovisor bcc (BPF Compiler Collection) project. These include tools to analyze the CPU scheduler, TCP performance, file system performance, block I/O, and more."
This document provides a table of contents and chapters on useful SAP transactions, programs, and general ABAP programming tips. Chapter 1 lists transactions for EDI, IDoc administration, requirements coding, sales order processing, and general transactions. Chapter 2 describes useful function modules, programs, includes and fields. Following chapters cover general programming, reports, IDoc programming, object programming, ALV grid control, Basis errors and an index. The document serves as a reference for ABAP developers needing guidance on common tasks.
This document discusses the crash reporting mechanism in Tizen. It describes the crash client, which handles crash signals and generates crash reports. It covers Samsung's crash-work-sdk and Intel's corewatcher crash clients. It also discusses the crash server that receives reports and the CrashDB web interface. Finally, it mentions crash reason location algorithms.
This document provides an overview and instructions for using IBM's DFSORT utility on the z/OS operating system. It discusses DFSORT's functions for sorting, merging, and copying records; describes how to invoke DFSORT using JCL; and details the various program control statements that can be used to control DFSORT's processing. The document also covers using user exit routines with DFSORT to customize its behavior.
This document provides operating instructions for a Lenze 2102 fieldbus module that can communicate via RS232, RS485, or optical fiber. It includes information on installation, connections, parameter settings, and troubleshooting. The module can be used with various Lenze controller units, including 82XX, 8200 vector, and 93XX series controllers. Parameters must be set depending on the connected controller and communication method used.
Simocode dp = manual de parametrização e operaçãoconfidencial
This document is the manual for the 3UF5 SIMOCODE-DP System Motor Protection and Control Device. It describes the components, functions, and parameterization of the SIMOCODE-DP system. The system provides motor protection, control, and monitoring. It consists of basic units, expansion modules, and an operator panel that can communicate via PROFIBUS-DP. The manual provides details on setup, configuration, protection functions, and troubleshooting.
This document provides an overview and introduction to programming and using the S7-200 Micro PLC system. It describes installing the hardware, programming software, and entering sample programs. Key topics covered include comparing features of different CPU models, installing the CPU and I/O modules, setting up the STEP 7-Micro/WIN software, and programming basics such as ladder logic, data types, and instructions. The document also provides additional reference material on communications, the instruction set, and troubleshooting.
The document provides instructions for configuring routing on a partially completed network to establish connectivity between different regions and the internet. Key steps include:
1. Configuring device basics like hostnames, passwords, and interfaces on routers.
2. Configuring static and default routes between different regions.
3. Configuring EIGRP routing with an AS number between routers, advertising networks and disabling automatic summarization.
4. Modifying EIGRP settings like bandwidth usage and configuring summary routes between routers.
5. Verifying full connectivity between all networks is established.
2. Table of Contents
Performance of IBM UNIX, IBM i and Linux Operating System Servers ................................... 3
Section 1 - AIX SPEC CPU2006 HPC Performance ......................................................................... 4
Section 1a - AIX SPEC CPU2000 Performance ................................................................................ 4
Section 2 - AIX Multiuser Performance (rPerf, SPEC CPU2006).................................................. 5
Section 2a - AIX Multiuser Performance (rPerf, SPEC CPU2000, SPECweb99) ...................... 7
Section 2b - Power Sytems Multiuser Performance using AIX 5L V5.2 .................................. 10
Section 2c - AIX Capacity Upgrade on Demand Relative Performance Guidelines ........... 122
Section 2d - CPW Published Results………………………………………………………………18
Section 3- TPC-C Version 5 Published Results ............................................................................. 19
Section 4 - TPC-H Published Results ............................................................................................... 20
Section 5 - AIX SPECsfs97_R1 Benchmark Results..................................................................... 20
Section 5a - AIX NotesBench Published Results .......................................................................... 20
Section 6 - AIX Java Benchmarks (SPECjvm98, SPECjbb2000, SPECjbb2005) Published Results
.................................................................................................................................................................... 21
Section 6a - IBM i Java Benchmarks (SPECjbb2005) Published Results………..…………..21
Section 6b - AIX SPECjAppServer2004 Published Results…………………………………….21
Section 7 - SAP Standard Application Benchmarks Published Results ............................. 2222
Section 8 - AIX PeopleSoft Benchmarks Published Results...................................................... 23
Section 9 - AIX Oracle e-Business Suite (eBS) Benchmarks Published Results ................. 24
Section 10 - AIX Siebel Benchmarks Published Results............................................................. 24
Section 11 - AIX Sybase Benchmarks Published Results .......................................................... 25
Section 12 - AIX Manugistics Benchmarks Published Results ................................................. 25
Section 13 - Linux Published Benchmark Results........................................................................ 25
Section 14 - Historical Multiuser Performance .............................................................................. 29
Notes on Performance Benchmarks and Values........................................................................... 34
Page 2
3. Performance of IBM UNIX, IBM i and Linux Operating System Servers
February 9, 2010
This document contains performance and benchmark results for IBM servers and workstations running the UNIX®
(AIX®), IBM i and Linux® operating systems. This includes the IBM Power™ Systems servers (System p™,
System p5™, eServer™ p5, pSeries®, OpenPower® and IBM RS/6000®; BladeCenter® Power Architecture®
technology-based blades) and IntelliStation® POWER™ workstations.
This document contains the results for the new POWER7 systems.
Section One of this report includes the SPEC CPU2006 results. SPEC CPU2000 results are presented in Section
1a.
Section Two is multiuser performance. The rPerf, CPW and SPEC_rate2006 are presented in this section.
Multiuser Performance of SPEC CPU2000 along with rPerf and SPECweb99 are presented in Section 2a.
Multiuser performance using AIX® V5.2 is presented in Section 2b. Capacity Upgrade on Demand relative
performance guidelines are presented in Section 2c. Section 2d of this report includes CPW benchmark
information provided for new POWER6 processor-based servers running the IBM i operating system.
Section Three presents the TPC-C version 5 results.
Section Four provides published TPC-H results.
Section Five reflects the published SPECsfs97 benchmark results. The NotesBench results to date are presented
in Section 5a.
Section Six reflects the published SPECjvm98, SPECjbb2000 and SPECjbb2005 Java™ benchmarks.
Section Seven through Twelve include published application performance benchmarks for SAP, PeopleSoft, Oracle
Applications, Seibel, Sybase and Manugistics.
Section Thirteen contains Linux operating system performance results.
Section Fourteen is a historical list of commercial performance estimates for IBM System p™, RS/6000 models and
RS/6000 SP™ nodes that have been withdrawn from marketing. IBM has discontinued Relative OLTP results.
All performance measurements for the IBM System p, IBM System p5, IBM eServer p5, IBM eServer pSeries, IBM
RS/6000 servers, IntelliStation POWER workstations and BladeCenter blades were made with systems running the
AIX operating system unless otherwise indicated to have used Linux. For new and upgraded systems, AIX Version
4.3, AIX 5 or AIX 6 were used. All other systems used previous versions of AIX.
Footnotes used in following tables:
# - System has been announced as withdrawn from marketing; * - Submitted to SPEC, waiting review; e – estimate;
n – new; u – upgrade; N/A - not available; P5 – IBM POWER5™; P5+ – IBM POWER5+™; P6 – IBM POWER6™;
P6+ – IBM POWER6+™; P7 – POWER7™, IS – IntelliStation, OP – OpenPower, PPC – PowerPC®
Changes from last version are highlighted in yellow.
Page 3