This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
2 modulo de curso operator grua movil bureau veritas argentinaEdgardo Bartol
Este documento presenta información sobre diferentes tipos de grúas, incluyendo grúas para terreno difícil, todo terreno, montadas en camiones e industriales. También describe varios componentes clave de las grúas como la superestructura, la pluma, el cabezal y los cabrestantes. El documento proporciona definiciones y diagramas para ayudar a los lectores a comprender mejor la terminología y tecnología asociada con las grúas.
Hyster r005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Massey ferguson mf 1030 l compact tractor parts catalogue manualhfjsejdkemmn
This document provides a parts list for the electric PTO clutch and auxiliary hydraulics for an MF 1030 L compact tractor with the serial number 651579EA. It includes 74 numbered parts with descriptions and quantities for the electric PTO clutch and 29 numbered parts for the auxiliary hydraulics system, noting this was used on early production tractors. Key parts listed include the clutch kit, plates, coils, shafts, bearings, switches, and wires.
Ruby loves to copy everything her neighbor Sally does. One day, Sally's mother tells her not to imitate Ruby anymore. Ruby is upset that Sally will no longer be her friend and play the same games with her. However, the next day Sally invites Ruby to play dress-up with her. Ruby is happy they can still be friends, even if Ruby is not copying Sally anymore.
This document provides safety information and guidelines for the use of Sandvik top hammer rock drilling tools. It discusses the importance of safety, proper personal protective equipment, risk assessment, safe operating procedures, and hazard identification. The document recommends specific safety practices for different operations like grinding bits, drilling, lifting, cleaning rods, and dealing with worn parts. Overall, the document emphasizes putting safety first when using Sandvik rock drilling tools and equipment.
Hyster r005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes details such as:
- Lifting capacities ranging from 8,000 to 12,000 lbs depending on the model.
- Fuel tank capacities of 79-100 liters for gas and diesel engines.
- Transmission, hydraulic, and electrical system specifications.
- Procedures for removing drive axles and differentials for repair work.
Hyster r005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
2 modulo de curso operator grua movil bureau veritas argentinaEdgardo Bartol
Este documento presenta información sobre diferentes tipos de grúas, incluyendo grúas para terreno difícil, todo terreno, montadas en camiones e industriales. También describe varios componentes clave de las grúas como la superestructura, la pluma, el cabezal y los cabrestantes. El documento proporciona definiciones y diagramas para ayudar a los lectores a comprender mejor la terminología y tecnología asociada con las grúas.
Hyster r005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Massey ferguson mf 1030 l compact tractor parts catalogue manualhfjsejdkemmn
This document provides a parts list for the electric PTO clutch and auxiliary hydraulics for an MF 1030 L compact tractor with the serial number 651579EA. It includes 74 numbered parts with descriptions and quantities for the electric PTO clutch and 29 numbered parts for the auxiliary hydraulics system, noting this was used on early production tractors. Key parts listed include the clutch kit, plates, coils, shafts, bearings, switches, and wires.
Ruby loves to copy everything her neighbor Sally does. One day, Sally's mother tells her not to imitate Ruby anymore. Ruby is upset that Sally will no longer be her friend and play the same games with her. However, the next day Sally invites Ruby to play dress-up with her. Ruby is happy they can still be friends, even if Ruby is not copying Sally anymore.
This document provides safety information and guidelines for the use of Sandvik top hammer rock drilling tools. It discusses the importance of safety, proper personal protective equipment, risk assessment, safe operating procedures, and hazard identification. The document recommends specific safety practices for different operations like grinding bits, drilling, lifting, cleaning rods, and dealing with worn parts. Overall, the document emphasizes putting safety first when using Sandvik rock drilling tools and equipment.
Hyster r005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes details such as:
- Lifting capacities ranging from 8,000 to 12,000 lbs depending on the model.
- Fuel tank capacities of 79-100 liters for gas and diesel engines.
- Transmission, hydraulic, and electrical system specifications.
- Procedures for removing drive axles and differentials for repair work.
Hyster r005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair.
Hyster r005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster s005 (h90 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
The document is a service manual that outlines repair procedures and provides technical specifications to assist with maintenance and repairs for the specified Hyster lift truck models. It includes detailed tables, figures, and warnings for working on components like the drive axle, differential, brakes, and other parts
Hyster s005 (h110 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h120 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster r005 (h80 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair.
Hyster r005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster s005 (h90 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
The document is a service manual that outlines repair procedures and provides technical specifications to assist with maintenance and repairs for the specified Hyster lift truck models. It includes detailed tables, figures, and warnings for working on components like the drive axle, differential, brakes, and other parts
Hyster s005 (h110 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h120 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Similar to Hyster r005 (h5.5 ft europe) forklift service repair manual (20)
The document is a parts catalog for a wheel loader model 60Z7 powered by a DEUTZ engine. It lists the chassis number and manufacturer's serial number range for the loader. The bulk of the document is an index of parts for the loader organized by name with page references.
Kawasaki 42 zv 2 wheel loader service repair manualfhjsekkemm
The document contains technical manuals for wheel loaders including sections on general information, systems, component operation, disassembly and reassembly, and troubleshooting; it provides specifications, component layouts, operational principles, and procedures for maintenance and repair. Safety information is also included, covering proper use of safety equipment, emergency preparedness, machine inspection, and general precautions. The manuals are intended for experienced technicians to maintain and repair the wheel loaders.
Kawasaki 40 zv 2a wheel loader service repair manualfhjsekkemm
The document contains 3 sections of technical manuals for wheel loaders, including an operational principles manual, disassembly and reassembly manual, and a troubleshooting manual. It provides information on specifications, components, systems, operation, maintenance and repairs for various models of wheel loaders powered by Kubota engines. Serial numbers and parts numbers are listed to identify the applicable models covered.
This document is a parts catalog for a wheel loader model 30ZV-2 powered by a Kubota D1803-M-DI-E3B-WLTC1 engine. It lists parts for the engine, air cleaner, and other systems organized by part number, name, quantity, and applicability. Serial numbers listed are 30K1-5001 through 30K1-5001.
This document is a parts catalog for a wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It contains lists of parts for components like the HST pump assembly, piston pump assembly, rotary group, hydraulic control, and piston complete. Each part listing includes the part name, number, quantity, and applicable serial number range.
This document is a parts catalog that lists parts for a 30ZV-2 equipment component. It includes over 90 part names and part numbers organized into categories such as HST Pump Assy, Piston Pump Assy, Rotary Group, Axle Assy, Differential, Cylinder, and more. The catalog provides the part name, part number, quantity, and serial number for replacement parts.
Isuzu 4 hk1 diesel engine service repair manualfhjsekkemm
This document provides instructions for disassembling and removing components from an Isuzu 4HK1 diesel engine used in Kawasaki wheel loaders. The summary includes:
1) The document outlines procedures for removing components like the cylinder head assembly, turbocharger assembly, fuel injection components, valves, camshaft, and more.
2) Instructions are provided with detailed steps and diagrams for each component. Precautions are noted to properly identify parts and avoid damage.
3) Special tools are recommended for some jobs like removing injectors and valve guides to make the process easier.
Hyster u005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster u005 (h5.5 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h5.0 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
- Identification of fill plug, drain plug, and bleeder valve locations for the drive axle.
Hyster u005 (h4.5 fts5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
- Identification of fill plug, drain plug, and bleeder valve locations for the drive axle.
Hyster u005 (h4.5 ft6 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Lift Truck Lifting Capacity
Model Weight
H4.0FT5, H4.0FT6 (H80FT) (R005) 3629 kg (8000 lb)
H4.5FTS5 (H90FT) (R005) 4082 kg (9000 lb)
H4.5FT6 (H100FT) (R005) 4536 kg (10000 lb)
H5.0FT (H110FT) (R005) 4989 kg (11000 lb)
H5.5FT (H120FT) (R005) 5443 kg (12000 lb)
NOTE: Load center at 500 mm (24 in.).
Counterweight Weights
Model Weight
H4.0FT5 (H80FT) (R005) 2172 kg (4788 lb)
H4.0FT6 (R005) 2370 kg (5225 lb)
H4.5FTS5 (H90FT) (R005) 2504 kg (5520 lb)
H4.5FT6 (H100FT) (R005) 2709 kg (5972 lb)
H5.0FT (H110FT) (R005) 3009 kg (6634 lb)
H5.5FT (H120FT) (R005) 3294 kg (7262 lb)
8000 SRM 1559 Lift Truck Lifting Capacity
1
3. Tire Sizes
Truck Drive Tires Steer Tires
H4.0FT5, H4.5FTS5 (H80FT,
H90FT) (R005)
250 x 15
250 x 70 x R15
28 x 12.5 to 15
29 x 8 Dual
7.00 x 15 Dual
7.00 x R15 Dual
7.00 x 12
28 x 9 to 15
H4.5FT6, H5.0FT, H5.5FT
(H100FT, H110FT, H120FT)
(R005)
300 x 15
315 x 70 x R15
32 x 12.1 to 15
355 x 65 x 15
355 x 50 x 20
8.25 x 15 Dual
8.25 x R15 Dual
7.00 x 12
28 x 9 to 15
Tire Sizes 8000 SRM 1559
2
5. Table 1. H4.0FT5/FT6; H4.5FTS5, H4.5FT6; H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005) (Continued)
Item Quantity Specifications
Cooling System
PSI (GM) 4.3L 15.1 liter (15.9 qt)
CAUTION
Additives may damage the
cooling system. Before using
additives, contact your local
Hyster dealer.
Use Ethylene Glycol Boron-
free Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled or deionized water.
Kubota Diesel 11 liter (11.6 qt)
CAUTION
Additives may damage the
cooling system. Before using
additives, contact your local
Hyster dealer.
Use Ethylene Glycol Boron-
free Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled or deionized water.
Hydraulic Tank Oil Capacity
PSI (GM) 4.3L (Short Wheel Base)
62.0 liter (65.5 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
PSI (GM) 4.3L (Long Wheel Base)
78 liter (84 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Capacities 8000 SRM 1559
4
6. Table 1. H4.0FT5/FT6; H4.5FTS5, H4.5FT6; H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005) (Continued)
Item Quantity Specifications
Kubota Diesel (Short Wheel Base)
62.0 liter (65.5 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Kubota Diesel (Long Wheel Base)
78.0 liter (82.4 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Transmission (Dry Brake)
Basic Powershift Transmission 20 liter (21.0 qt) John Deere
JDM J20C
DuraMatch Transmission 20 liter (21.0 qt) John Deere
JDM J20C
Brake Oil (Master Cylinder) 0.35 liter (0.74 pt) Dexron III
Differential and Drive Axle Oil
(Dry Brake)
8.0 liter (8.5 qt) SAE 80W-90 or 85W-140
Transmission and Wet Brake Drive Axle - Dana Axle Only
Transmission and Planetary Carrier
Housing
31.3 liter (33.0 qt) John Deere
JDM J20C
Center body (Dana Axle Only) 2.0 liter (2.1 qt) SAE 80W-90
Wet Brake Drive Axle - NMHG Axle Only
New or Rebuilt Axle 10.3 liter (10.9 qt) John Deere
JDM J20C
Service Fill 9.3 liter (9.9 qt) John Deere
JDM J20C
8000 SRM 1559 Capacities
5
8. Transmission Oil Pressures
1-Speed Transmission All Pressures at 2000 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1 Transmission Pump Port 2 Port 3 Port 4 Port 5
***Low
Pressure
***High
Pressure
Reverse
Clutch
Forward
Clutch
Torque
Converter
Lubrication
1138 ±96* kPa
(165 ±14 psi)
1482 ±96* kPa
(215 ±15 psi)
983 ±58** kPa
(142.5 ±8.5 psi)
983 ±58** kPa
(142.5 ±8.5 psi)
738 ±52 kPa
(107 ±7.5 psi)
138 ±34.5 kPa
(20 ±5 psi)
*Relief Pressure **Clutch pack pressure difference between the forward and reverse packs cannot exceed
manufacturing limit of 48 kPa (7 psi) or service limit of 70 kPa (10 psi). ***High pressure port is used when
the lift truck is equipped with a dry brake system. The low pressure port is used when the lift truck is
equipped with a wet brake system.
8000 SRM 1559 Transmission Oil Pressures
7
9. 2-Speed Transmission All Pressures at 2000 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1 Transmission Pump Port 2 Port 3 Port 4 Port 5 Port 6
***Low
Pressure
***High
Pressure
Reverse
Clutch
Forward
Low Clutch
Forward
High
Clutch
Torque
Converter
Lubrication
1138
±96* kPa
(165 ±14 psi)
1482 ±96* kPa
(215 ±15 psi)
983
±58** kPa
(142.5
±8.5 psi)
983
±58** kPa
(142.5
±8.5 psi)
983
±58** kPa
(142.5
±8.5 psi)
738 ±52 kPa
(107
±7.5 psi)
138 ±34.5 kPa
(20 ±5 psi)
*Relief Pressure **Clutch pack pressure difference between the forward and reverse packs cannot exceed
manufacturing limit of 48 kPa (7 psi) or service limit of 70 kPa (10 psi). ***High pressure port is used when
the lift truck is equipped with a dry brake system. The low pressure port is used when the lift truck is
equipped with a wet brake system.
Transmission Oil Pressures 8000 SRM 1559
8
10. Hydraulic System Relief Pressures
Table 3. Hydraulic Systems With Hydraulic Gear Pump
Item Specification
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Primary Relief Valve Pressure (High Idle) 22.1 ±0.48 MPa (3205 ± 70 psi)
Secondary Relief Valve Pressure (High Idle) 15.51 ±0.48 MPa (2250 ±70 psi)
Table 4. Hydraulic Systems With Variable Displacement Pump
Item Specification
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Primary Relief Valve Pressure (High Idle) 23.7 ±0.50 MPa (3437 ± 72.5 psi)
Secondary Relief Valve Pressure (High Idle) 15.50 ±0.50 MPa (2248 ±72.5 psi)
Maximum Allowable Leakage at 1A Port to Tank 22.7 cc @ 19.3 MPa (2799 psi)
Steering System
Table 5. H4.0FT5/FT6; H4.5FTS5, H4.5FT6; H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005)
Item Quantity
Oil Temperature 50 to 65°C (122 to 149°F)
Steering Relief Pressure at 800 rpms (PSI (GM) 4.3L
and Kubota 3.8L Diesel Engine)
12.4 ±0.3 MPa (1798 ±43.5 psi)
Steering Relief Pressure at 850 rpms (Kubota 3.6L
Diesel Engine)
12.4 ±0.3 MPa (1798 ±43.5 psi)
Steering Cylinder Stroke (Each Side) 200.85 mm (7.9 in.)
Inside Steering Tire Angle 80°
Number of Turns to Lock 3.984
Turning Radius (±50 mm NO LOAD) Outside Inside
H4.0FT5 (H80FT) 2570 49
H4.0FT6 2599 49
H4.5FTS5 (H90FT) 2619 49
H4.5FT6 (H100FT) 2837 131
H5.0FT (H110FT) 2877 131
H5.5FT (H120FT) 2915 131
8000 SRM 1559 Hydraulic System Relief Pressures
9
11. General
This manual covers the repair of the drive axle,
differential, and wet disc brakes.
IDENTIFICATION PLATE
See Figure 1.
1. IDENTIFICATION PLATE
Figure 1. Identification Plate
Drive Axle Removal
WARNING
When putting the lift truck on blocks, make sure
the surface is solid, even, and level. Any blocks
used to support the lift truck must be solid, one-
piece units.
1. Put blocks on each side (front and back) of
steering tires to prevent movement of lift truck.
2. Raise lift truck and put blocks under frame so
that drive wheels do not touch floor. Put blocks
under counterweight for stability.
3. Remove mast assembly as described in section
Mast Repairs (S/N A513, A514, A613, A614,
A702, A703, A704, A705, A706, A707, A751,
A752, B513, B514, B586, B587, B588, B589,
B590, B591, B749, B750, B751, B752, B753,
B754) 4000SRM1250.
WARNING
On lift trucks with pneumatic tires, completely re-
move air from tires before removing them from lift
truck. Air pressure in tires can cause tire and rim
parts to explode, which can cause serious injury
or death. Never loosen nuts that hold together in-
ner and outer wheel halves when there is air pres-
sure in tire.
4. Remove wheels.
5. Remove fill plugs on both sides of drive axle.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
6. Remove the drive axle trumpet arm (right side)
fill/level plug.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
1400 SRM 1582 General
1
12. See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
7. Remove the drain plugs to drain the oil into a
suitable container.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
8. Remove the parking brake cable. Refer to the
section Wet Brakes - NMHG 1800SRM1597.
A. TOP VIEW SHOWN B. BOTTOM VIEW SHOWN
1. SERVICE BRAKE PORT
2. FILL PLUG
3. OIL BREATHER
4. FILL/LEVEL PLUG
5. BRAKE BLEEDER VALVE
6. DRAIN PLUG
Figure 2. Drive Axle Drain and Fill/Level Plugs for Lift Truck Models S4.0, 4.5, 5.5FT, S5.5FTS, (S80, 100,
120FT; S80, 100FTBCS; S120FTS; S120FTPRS) (H004, J004)
Drive Axle Removal 1400 SRM 1582
2
13. A. TOP VIEW SHOWN B. BOTTOM VIEW SHOWN
1. SERVICE BRAKE PORT
2. FILL PLUG
3. OIL BREATHER
4. FILL/LEVEL PLUG
5. BRAKE BLEEDER VALVE
6. DRAIN PLUG
Figure 3. Drive Axle Drain and Fill/Level Plugs for Lift Truck Models H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005, S005, U005)
1400 SRM 1582 Drive Axle Removal
3
14. 9. Disconnect the brake line from the piston
chamber and drain oil into a suitable container.
See Figure 4.
1. BRAKE LINE
Figure 4. Brake Line and Piston Chamber
10. Place blocks under the axle assembly and con-
nect slings and lifting device.
11. Place blocks under the transmission to support
the transmission while removing the drive axle.
12. Remove the capscrews holding the drive shaft
and remove the drive shaft.
13. Remove the transmission isolator mounting
bolt located on top of the assembly. See Fig-
ure 5.
14. Remove the four mounting capscrews and
washers from the drive axle. See Figure 6.
15. Remove blocks and lower the drive axle assem-
bly. Pull axle forward and away from frame.
16. Place blocks under the differential assembly.
NOTE: DRIVE AXLE FOR H4.0FT5/FT6; H4.5FTS5,
H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005) SHOWN. TRANSMISSION
MOUNTING FOR S4.0, 4.5, 5.5FT, S5.5FTS (S80,
100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004) IS SIMILAR.
1. ISOLATORS
2. WASHER
3. WASHER
4. CAPSCREW
5. TRANSMISSION
6. DRIVE AXLE
Figure 5. Transmission to Differential Mounting
Bolt
Drive Axle Removal 1400 SRM 1582
4
15. Figure 6. Drive Axle Mounting Capscrews
Legend for Figure 6
NOTE: DRIVE AXLE FOR H4.0FT5/FT6; H4.5FTS5,
H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005) SHOWN. TRANSMISSION
MOUNTING FOR S4.0, 4.5, 5.5FT, S5.5FTS (S80,
100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004) IS SIMILAR.
1. CAPSCREW
2. WASHER
3. DRIVE AXLE
Reduction Gear Assembly
REMOVE
1. Remove fourteen capscrews in wheel hub cou-
pler.
See Figure 7 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 8 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
2. Install two of fourteen capscrews in wheel hub
removal holes. DO NOT tighten capscrews.
See Figure 9 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 10 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
3. Once capscrews are snug, begin an alternating
tightening sequence between two capscrews.
Make sure to turn each capscrew same amount
before returning to previous capscrew. Before
capscrews bottom out, wheel hub coupler will
be freed from wheel hub.
4. Once wheel hub coupler is free, bearing cap
may be driven free from wheel hub coupler (if it
shows signs of damage) with a soft hammer/
mallet. Discard bearing cap if removed.
5. Remove two O-rings from wheel hub coupler
and discard.
See Figure 9 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 10 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
6. Remove ten capscrews holding retaining plate
to wheel bearing support. See Figure 11.
7. Rotate wheel hub to access socket head cap-
screws in wheel bearing support.
8. Remove twelve socket head capscrews in wheel
bearing support. See Figure 12.
9. Remove reduction gear assembly from drive
axle trumpet arm (left side). See Figure 12.
10. Remove and discard O-ring. See Figure 12 de-
pending on lift truck model.
1400 SRM 1582 Drive Axle Removal
5
16. NOTE: LEFT REDUCTION GEAR SHOWN. THE COMPONENTS FOR RIGHT SIDE ARE SAME.
1. CAPSCREW
2. BEARING CAPS
3. WHEEL HUB COUPLER
4. O-RING
5. SNAP RING
6. RETAINER PLATE
7. BEARING SET
8. WHEEL HUB
9. WHEEL STUD
10. SEAL
11. SOCKET HEAD CAPSCREW
12. WHEEL BEARING SUPPORT
13. RING GEAR
14. PLANETARY CARRIER
15. PLANETARY GEAR
Figure 7. Reduction Gear Assembly for Lift Truck Model S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT; S80,
100FTBCS; S120FTS; S120FTPRS) (H004, J004)
Reduction Gear Assembly 1400 SRM 1582
6
17. NOTE: LEFT REDUCTION GEAR SHOWN. THE COMPONENTS FOR RIGHT SIDE ARE SAME.
1. CAPSCREW
2. BEARING CAPS
3. WHEEL HUB COUPLER
4. O-RING
5. SNAP RING
6. RETAINER PLATE
7. BEARING SET
8. WHEEL HUB
9. WHEEL STUD
10. SEAL
11. SOCKET HEAD CAPSCREW
12. WHEEL BEARING SUPPORT
13. RING GEAR
14. PLANETARY CARRIER
15. PLANETARY GEAR
Figure 8. Reduction Gear Assembly for Lift Truck Model H4.0FT5/FT6; H4.5FTS5, H4.5FT6, H5.0-5.5FT
(H80, 90, 100, 110, 120FT) (R005, S005, U005)
1400 SRM 1582 Reduction Gear Assembly
7
19. NOTE: REDUCTION GEAR FOR H4.0FT5/FT6;
H4.5FTS5, H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110,
120FT) (R005, S005, U005) SHOWN. S4.0, 4.5,
5.5FT, S5.5FTS (S80, 100, 120FT; S80, 100FTBCS;
S120FTS; S120FTPRS) (H004, J004) IS SIMILAR.
1. SOCKET HEAD CAPSCREW
2. O-RING
3. REDUCTION GEAR ASSEMBLY
4. DRIVE AXLE TRUMPET ARM (LEFT SIDE)
Figure 12. Removing Reduction Gear From Drive
Axle Trumpet Arm (Left Side) for Lift Truck
Models H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005, S005,
U005)
DISASSEMBLE
1. Place reduction gear assembly in a soft jawed
vise.
2. Remove planetary gear carrier. See Figure 13.
3. Remove ring gear.
See Figure 13 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 14 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
4. Remove snap ring from planetary gear carrier
in front of planetary gear.
See Figure 13 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 14 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
1. REDUCTION GEAR ASSEMBLY
2. WHEEL HUB
3. WHEEL BEARING SUPPORT
4. RING GEAR
5. PLANETARY GEAR CARRIER
6. PLANETARY GEAR
7. SNAP RING
Figure 13. Planetary Gears and Ring Gear
Removal for Lift Truck Models S4.0, 4.5, 5.5FT,
S5.5FTS (S80, 100, 120FT; S80, 100FTBCS;
S120FTS; S120FTPRS) (H004, J004)
1400 SRM 1582 Reduction Gear Assembly
9
20. 1. REDUCTION GEAR ASSEMBLY
2. WHEEL HUB
3. WHEEL BEARING SUPPORT
4. RING GEAR
5. PLANETARY GEAR CARRIER
6. PLANETARY GEAR
7. SNAP RING
Figure 14. Planetary Gears and Ring Gear
Removal for Lift Truck Models H4.0FT5/FT6;
H4.5FTS5, H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110,
120FT) (R005, S005, U005)
5. Remove planetary gear.
See Figure 13 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 14 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
6. Repeat Step 4 through Step 6 for other two
planetary gears and bearings.
7. Remove thrust block if signs of wear are
present.
See Figure 13 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 14 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
NOTE: Perform following step with wheel hub un-
der a press on a suitable support, using appropriate
driver.
8. Pull wheel hub from wheel bearing support.
NOTE: The wheel bearing cone will remain on
wheel bearing support. The bearing cup will remain
in wheel hub.
NOTE: Step 9 and Step 10 need to be performed
with wheel hub on a flat surface.
9. Using appropriate bearing puller, remove in-
board bearing cone from wheel bearing support.
10. Using a pry bar, remove and discard seal ring.
See Figure 15.
11. Place wheel hub in a soft jawed vise.
NOTE: Inspect bearing cups before removal.
12. Using a drift and hammer remove outboard
bearing cup from wheel hub.
See Figure 15 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 16 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
13. Using a drift and hammer drive inboard bear-
ing cone from wheel hub.
See Figure 15 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
Reduction Gear Assembly 1400 SRM 1582
10
21. See Figure 16 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
1. OUTBOARD BEARING CONE
2. OUTBOARD BEARING CUP
3. WHEEL HUB
4. INBOARD BEARING CUP
5. INBOARD BEARING CONE
6. SEAL
7. WHEEL BEARING SUPPORT
Figure 15. Wheel Hub Bearings, Seal, and Bearing
Support for Lift Truck Models S4.0, 4.5, 5.5FT,
S5.5FTS (S80, 100, 120FT; S80, 100FTBCS;
S120FTS; S120FTPRS) (H004, J004)
1. OUTBOARD BEARING CONE
2. OUTBOARD BEARING CUP
3. WHEEL HUB
4. INBOARD BEARING CUP
5. INBOARD BEARING CONE
6. SEAL
7. WHEEL BEARING SUPPORT
Figure 16. Wheel Hub Bearings, Seal, and Bearing
Support for Lift Truck Models H4.0FT5/FT6;
H4.5FTS5, H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110,
120FT) (R005, S005, U005)
1400 SRM 1582 Reduction Gear Assembly
11
22. NOTE: Perform Step 14 only if necessary. If wheel
studs are removed they will need to be replaced
with new wheel studs. It is recommended to place
an oversized socket or spacer under wheel stud be-
ing removed to support wheel hub's flange and pre-
vent warping during wheel stud removal.
14. For lift truck models S4.0, 4.5, 5.5FT, S5.5FTS
(S80, 100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004), remove wheel studs
from wheel hub with a hammer or press. See
Figure 17.
Wheel studs for lift truck models H4.0FT5/FT6;
H4.5FTS5, H4.5FT6, H5.0-5.5FT (H80, 90, 100,
110, 120FT) (R005, S005, U005) can be removed
with correct size socket. See Figure 18.
1. WHEEL HUB
2. WHEEL STUD
Figure 17. Wheel Studs Removal for Lift Truck
Models S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT;
S80, 100FTBCS; S120FTS; S120FTPRS) (H004,
J004)
1. WHEEL STUD
2. WHEEL HUB
Figure 18. Wheel Studs Removal for Lift Truck
Models H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (R005, S005,
U005)
Reduction Gear Assembly 1400 SRM 1582
12
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. CLEAN AND INSPECT
WARNING
Cleaning solvents can be flammable and toxic and
can cause skin irritation. When using cleaning
solvents, always follow the recommendations of
the manufacturer.
WARNING
Compressed air can move particles so that they
cause injury to the user or to other personnel.
Make sure that the path of the compressed air is
away from all personnel. Wear protective goggles
or a face shield to prevent injury to the eyes.
Clean and inspect following parts of reduction gear
assembly:
• Tapered roller bearings
- Inspect cup, cone, rollers, and cage of all ta-
pered roller bearings in assembly. If bearings
show signs of wear, cracks, or damage, re-
place with new bearing.
• Ring gear - Inspect ring gear for wear or
damage. If gear is worn or damaged it must
be replaced.
• Wheel hub and wheel hub support - In-
spect wheel hub and wheel hub support for
wear or damage. Parts that are damaged
must be replaced.
• Planetary carrier and parts - Inspect all
parts of planetary carrier for wear or dam-
age. Parts that are damaged must be re-
placed. If gears are replaced, new needle
bearings must be used. If any planet gear
needs to be replaced, all planet gears should
be replaced.
ASSEMBLE
1. For lift truck models S4.0, 4.5, 5.5FT, S5.5FTS
(S80, 100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004), support wheel hub.
It is recommended to use a steel ring (spacer)
with dimensions as shown in Figure 19, but
blocks may be used as well as long as there is
enough clearance to install wheel stud com-
pletely. Support wheel hub flange where wheel
stud is to be installed with an over sized socket
or spacer (as shown in Figure 20) to prevent
warping wheel hub flange.
For lift truck models H4.0FT5/FT6; H4.5FTS5,
H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005), place wheel hub as shown in
Figure 21.
Figure 19. Steel Ring
2. For lift truck models S4.0, 4.5, 5.5FT, S5.5FTS
(S80, 100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004), using a press or
hammer, install wheel studs. See Figure 20.
For lift truck models H4.0FT5/FT6; H4.5FTS5,
H4.5FT6, H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005) apply a coat of Loctite
2760TM
or Loctite 277TM
on to threads of wheel
stud ends threading into wheel hub and tighten
wheel studs to 245 to 300 N•m (181 to 221
lbf ft). See Figure 21.
3. Using appropriate driver tool install new seal
on to wheel bearing support. See Figure 22.
WARNING
Hot parts. Wear protective clothing and gloves to
prevent burns.
4. Place wheel bearing support on a flat surface.
Heat a new inboard bearing cone to 80 to
90°C (176 to 194°F). Using appropriate driver
tool install inboard bearing cone on to wheel
bearing support. Once inboard bearing cone is
cool, lubricate with multipurpose grease.
1400 SRM 1582 Reduction Gear Assembly
13
25. 1. WHEEL STUD
2. WHEEL HUB
3. SOCKET OR SPACER
4. STEEL RING, SPACER, OR BLOCKS
Figure 20. Wheel Studs Install for Lift Truck
Models S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT;
S80, 100FTBCS; S120FTS; S120FTPRS) (H004,
J004)
Figure 21. Wheel Studs Install for Lift Truck
Models S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100, 120FT;
S80, 100FTBCS; S120FTS; S120FTPRS) (H004,
J004)
Legend for Figure 21
1. WHEEL STUD
2. WHEEL HUB
1. SEAL
2. INBOARD BEARING CONE
3. WHEEL BEARING SUPPORT
Figure 22. Wheel Bearing Support
NOTE: A press or hammer used with appropriate
driver tool will be required for installation of bear-
ings, bearing cones, and bearing cups.
5. With wheel hub on a flat surface, install a new
inboard bearing cup into wheel hub.
See Figure 23 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (H004, J004)
See Figure 24 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(R005, S005, U005)
Reduction Gear Assembly 1400 SRM 1582
14