The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster n005 (h80 ft) forklift service repair manualfjkskekmdmme
This document provides instructions for servicing and repairing components in the cooling system, including checking for issues, flushing the system, and replacing the radiator. It describes:
- Checking for exhaust leaks, water flow restrictions, and issues with the radiator hoses and water pump.
- Flushing the cooling system by draining the water, cleaning internally with water or chemicals, and refilling with a coolant mixture.
- Removing the radiator by draining the coolant, disconnecting hoses and electrical connections, removing mounting brackets, and taking out the radiator.
- Diagrams of typical cooling system layouts and component identification for different truck models.
Hyster s005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and counterweight weights for various models
- Tire sizes for different truck models
- Fuel, oil, and fluid capacities
- Electrical system specifications
- Transmission oil pressure specifications
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting lines
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster r005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster n005 (h80 ft) forklift service repair manualfjkskekmdmme
This document provides instructions for servicing and repairing components in the cooling system, including checking for issues, flushing the system, and replacing the radiator. It describes:
- Checking for exhaust leaks, water flow restrictions, and issues with the radiator hoses and water pump.
- Flushing the cooling system by draining the water, cleaning internally with water or chemicals, and refilling with a coolant mixture.
- Removing the radiator by draining the coolant, disconnecting hoses and electrical connections, removing mounting brackets, and taking out the radiator.
- Diagrams of typical cooling system layouts and component identification for different truck models.
Hyster s005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and counterweight weights for various models
- Tire sizes for different truck models
- Fuel, oil, and fluid capacities
- Electrical system specifications
- Transmission oil pressure specifications
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting lines
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster r005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes details such as:
- Lifting capacities ranging from 8,000 to 12,000 lbs depending on the model.
- Fuel tank capacities of 79-100 liters for gas and diesel engines.
- Transmission, hydraulic, and electrical system specifications.
- Procedures for removing drive axles and differentials for repair work.
Hyster r005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair.
Hyster r005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h4.5 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.0 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.5 fts5 europe) forklift service repair manualfikdkksmmd
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h5.0 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h5.0 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.5 ft6 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes details such as:
- Lifting capacities ranging from 8,000 to 12,000 lbs depending on the model.
- Fuel tank capacities of 79-100 liters for gas and diesel engines.
- Transmission, hydraulic, and electrical system specifications.
- Procedures for removing drive axles and differentials for repair work.
Hyster r005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h90 ft) forklift service repair manualfikdkksmmd
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair.
Hyster r005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes the lifting capacity, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models. The second half provides general instructions for removing and disassembling the drive axle and differential assembly for repair.
Hyster r005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications and repair information for Hyster lift trucks models H80FT through H120FT. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, electrical specifications, transmission oil pressures, hydraulic relief pressures, steering specifications, and stall speeds for the different models and engines. The last section provides general instructions for removing and disassembling the drive axle for repair work.
Hyster r005 (h4.5 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.0 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.5 fts5 europe) forklift service repair manualfikdkksmmd
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h5.0 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h5.0 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster r005 (h4.5 ft6 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Similar to Hyster s005 (h100 ft) forklift service repair manual (20)
The document is a parts catalog for a wheel loader model 60Z7 powered by a DEUTZ engine. It lists the chassis number and manufacturer's serial number range for the loader. The bulk of the document is an index of parts for the loader organized by name with page references.
Kawasaki 42 zv 2 wheel loader service repair manualfhjsekkemm
The document contains technical manuals for wheel loaders including sections on general information, systems, component operation, disassembly and reassembly, and troubleshooting; it provides specifications, component layouts, operational principles, and procedures for maintenance and repair. Safety information is also included, covering proper use of safety equipment, emergency preparedness, machine inspection, and general precautions. The manuals are intended for experienced technicians to maintain and repair the wheel loaders.
Kawasaki 40 zv 2a wheel loader service repair manualfhjsekkemm
The document contains 3 sections of technical manuals for wheel loaders, including an operational principles manual, disassembly and reassembly manual, and a troubleshooting manual. It provides information on specifications, components, systems, operation, maintenance and repairs for various models of wheel loaders powered by Kubota engines. Serial numbers and parts numbers are listed to identify the applicable models covered.
This document is a parts catalog for a wheel loader model 30ZV-2 powered by a Kubota D1803-M-DI-E3B-WLTC1 engine. It lists parts for the engine, air cleaner, and other systems organized by part number, name, quantity, and applicability. Serial numbers listed are 30K1-5001 through 30K1-5001.
This document is a parts catalog for a wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It contains lists of parts for components like the HST pump assembly, piston pump assembly, rotary group, hydraulic control, and piston complete. Each part listing includes the part name, number, quantity, and applicable serial number range.
This document is a parts catalog that lists parts for a 30ZV-2 equipment component. It includes over 90 part names and part numbers organized into categories such as HST Pump Assy, Piston Pump Assy, Rotary Group, Axle Assy, Differential, Cylinder, and more. The catalog provides the part name, part number, quantity, and serial number for replacement parts.
Isuzu 4 hk1 diesel engine service repair manualfhjsekkemm
This document provides instructions for disassembling and removing components from an Isuzu 4HK1 diesel engine used in Kawasaki wheel loaders. The summary includes:
1) The document outlines procedures for removing components like the cylinder head assembly, turbocharger assembly, fuel injection components, valves, camshaft, and more.
2) Instructions are provided with detailed steps and diagrams for each component. Precautions are noted to properly identify parts and avoid damage.
3) Special tools are recommended for some jobs like removing injectors and valve guides to make the process easier.
Hyster u005 (h120 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h100 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h90 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h5.5 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h5.0 ft europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
- Identification of fill plug, drain plug, and bleeder valve locations for the drive axle.
Hyster u005 (h4.5 fts5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
- Identification of fill plug, drain plug, and bleeder valve locations for the drive axle.
Hyster u005 (h4.5 ft6 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h4.0 ft6 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Lift Truck Lifting Capacity
Model Weight
H4.0FT5, H4.0FT6 (H80FT) (S005) 3629 kg (8000 lb)
H4.5FTS5 (H90FT) (S005) 4082 kg (9000 lb)
H4.5FT6 (H100FT) (S005) 4536 kg (10000 lb)
H5.0FT (H110FT) (S005) 4989 kg (11000 lb)
H5.5FT (H120FT) (S005) 5443 kg (12000 lb)
NOTE: Load center at 500 mm (24 in.).
Counterweight Weights
Model Weight
H4.0FT5 (H80FT) (S005) 2108 kg (4647 lb)
H4.0FT6 (S005) 2314 kg (5102 lb)
H4.5FTS5 (H90FT) (S005) 2455 kg (5412 lb)
H4.5FT6 (H100FT) (S005) 2642 kg (5825 lb)
H5.0FT (H110FT) (S005) 2936 kg (6473 lb)
H5.5FT (H120FT) (S005) 3226 kg (7112 lb)
8000 SRM 1605 Lift Truck Lifting Capacity
1
3. Tire Sizes
Truck Drive Tires Steer Tires
H4.0FT5, H4.5FTS5 (H80FT, H90FT) (S005)
250 x 15
250 x 70 x R15
28 x 12.5 to 15
29 x 8 Dual
7.00 x 15 Dual
7.00 x R15 Dual
7.00 x 12
28 x 9 to 15
H4.5FT6, H5.0FT, H5.5FT
(H100FT, H110FT, H120FT) (S005)
300 x 15
315 x 70 x R15
32 x 12.1 to 15
355 x 65 x 15
355 x 50 x 20
8.25 x 15 Dual
8.25 x R15 Dual
7.00 x 12
28 x 9 to 15
Tire Sizes 8000 SRM 1605
2
5. Item Quantity Specifications
Cooling System
PSI (GM) 4.3L
15.1 liter (15.9 qt)
CAUTION
Additives may damage the
cooling system. Before using
additives, contact your local
Hyster dealer.
Use Ethylene Glycol Boron-
free Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled or deionized water.
Kubota Diesel 11 liter (11.6 qt)
CAUTION
Additives may damage the
cooling system. Before using
additives, contact your local
Hyster dealer.
Use Ethylene Glycol Boron-
free Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled or deionized water.
Hydraulic Tank Oil Capacity
PSI (GM) 4.3L (Short Wheel Base)
62.0 liter (65.5 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
PSI (GM) 4.3L (Long Wheel Base)
78 liter (82.4 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Capacities 8000 SRM 1605
4
6. Item Quantity Specifications
Kubota Diesel (Short Wheel Base)
62.0 liter (65.5 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Kubota Diesel (Long Wheel Base)
78.0 liter (82.4 qt)
Drain and Fill
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your lo-
cal Hyster dealer.
ISO VG-46 Hydraulic
Oil −15°C (5°F) and
above
Transmission
Basic Powershift Transmission 20 liter (21.0 qt) John Deere
JDM J20C
DuraMatch Transmission 20 liter (21.0 qt) John Deere
JDM J20C
Brake Oil (Master Cylinder) 0.35 liter (0.74 pt) Dexron III
Transmission and Wet Brake Drive Axle - Dana Axle Only
Transmission and Planetary Carrier
Housing
31.3 liter (33.0 qt) John Deere
JDM J20C
Center Body (Dana Axle Only) 2.0 liter (2.1 qt) SAE 80W-90
Wet Brake Drive Axle - NMHG Axle Only
New or Rebuilt Axle 10.3 liter (10.9 qt) John Deere
JDM J20C
Service Fill 9.3 liter (9.9 qt) John Deere
JDM J20C
8000 SRM 1605 Capacities
5
8. Transmission Oil Pressures
1-Speed Transmission All Pressures at 2500 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1 Transmission Pump Port 2 Port 3 Port 5 Port 6
***Low
Pressure
***High
Pressure
Reverse
Clutch
Forward
Clutch
Torque
Converter
Lubrication
1138 ±96* kPa
(165 ±14 psi)
1482 ±96* kPa
(215 ±15 psi)
983 ±58** kPa
(142.5 ±8.5 psi)
983 ±58** kPa
(142.5 ±8.5 psi)
738 ±52 kPa
(107 ±7.5 psi)
55 ±28 kPa (8
±4 psi)
*Relief Pressure **Clutch pack pressure difference between the forward and reverse packs cannot exceed
manufacturing limit of 48 kPa (7 psi) or service limit of 70 kPa (10 psi). ***High pressure port is used when
the lift truck is equipped with a dry brake system. The low pressure port is used when the lift truck is
equipped with a wet brake system.
8000 SRM 1605 Transmission Oil Pressures
7
9. 2-Speed Transmission All Pressures at 2500 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1 Transmission Pump Port 2 Port 3 Port 4 Port 5 Port 6
***Low
Pressure
***High
Pressure
Reverse
Clutch
Forward
Low Clutch
Forward
High
Clutch
Torque
Converter
Lubrication
1138
±96* kPa
(165 ±14 psi)
1482 ±96* kPa
(215 ±15 psi)
983
±58** kPa
(142.5
±8.5 psi)
983
±58** kPa
(142.5
±8.5 psi)
983
±58** kPa
(142.5
±8.5 psi)
738 ±52 kPa
(107
±7.5 psi)
55 ±28 kPa (8
±4 psi)
*Relief Pressure **Clutch pack pressure difference between the forward and reverse packs cannot exceed
manufacturing limit of 48 kPa (7 psi) or service limit of 70 kPa (10 psi). ***High pressure port is used when
the lift truck is equipped with a dry brake system. The low pressure port is used when the lift truck is
equipped with a wet brake system.
Transmission Oil Pressures 8000 SRM 1605
8
10. Hydraulic System Relief Pressures
Table 1. Hydraulic Systems With Hydraulic Gear Pump
Item Specification
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Primary Relief Valve Pressure (High Idle) 22.1 ±0.48 MPa (3205 ± 70 psi)
Secondary Relief Valve Pressure (High Idle) 15.51 ±0.48 MPa (2250 ±70 psi)
Table 2. Hydraulic Systems With Variable Displacement Pump
Item Specification
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Primary Relief Valve Pressure (High Idle) 23.7 ±0.50 MPa (3437 ± 72.5 psi)
Secondary Relief Valve Pressure (High Idle) 15.50 ±0.50 MPa (2248 ±72.5 psi)
Maximum Allowable Leakage at 1A Port to Tank 22.7 cc @ 19.3 MPa (2799 psi)
Steering System
Item Quantity
Oil Temperature 50 to 65°C (122 to 149°F)
Steering Relief Pressure at 800 rpms
(PSI (GM) 4.3L and Kubota 3.8L Diesel Engine)
12.4 ±0.3 MPa (1798 ±43.5 psi)
Steering Relief Pressure at 850 rpms
(Kubota 3.6L Diesel Engine)
12.4 ±0.3 MPa (1798 ±43.5 psi)
Steering Cylinder Stroke (Each Side) 200.85 mm (7.9 in.)
Inside Steering Tire Angle 80°
Number of Turns to Lock 3.984
Turning Radius (±50 mm NO LOAD) Outside Inside
H4.0FT5 (H80FT) 2570 49
H4.0FT6 2599 49
H4.5FTS5 (H90FT) 2619 49
H4.5FT6 (H100FT) 2837 131
H5.0FT (H110FT) 2877 131
H5.5FT (H120FT) 2915 131
8000 SRM 1605 Hydraulic System Relief Pressures
9
11. Stall Speeds (in RPM ±100 rpm)
PSI (GM) 4.3L
Transmission New Engine Broken-In Engine
Basic 2000 2100
DuraMatch 2000 2100
DuraMatch2 2000 2100
DuraMatch Plus2 Stall Speed Not Valid Stall Speed Not Valid
KUBOTA 3.6L DIESEL
Transmission New Engine Broken-In Engine
Basic 1950 2000
DuraMatch 1950 2000
DuraMatch2 1950 2000
DuraMatch Plus2 Stall Speed Not Valid Stall Speed Not Valid
KUBOTA 3.8L DIESEL
Transmission New Engine Broken-In Engine
Basic 1900 1970
DuraMatch 1900 1970
DuraMatch2 1900 1970
DuraMatch Plus2 Stall Speed Not Valid Stall Speed Not Valid
Mast Speeds
NOTE: Lift speed is measured in meters/sec at gov-
erned engine RPM with full open valve and
65°C (149°F) oil temperature.
Lowering speed is measured in meters/sec with full
open valve and 65°C (149°F) oil temperature.
Plus or minus 10% acceptable lifting or lowering.
Table 3. Lift Truck Models H4.0FT5, H4.0FT6 (H80FT, H90FT) (S005)
Model/ Engine Mast
Lowering M/Sec Lifting M/Sec
No Load Rated Load No Load Rated Load
PSI (GM) 4.3L
(Standard
Displacement
Pump)
2-Stage LFL 0.47 0.55 0.62 0.61
2-Stage FFL 0.36 0.50 0.55 0.54
3-Stage FFL 0.44 0.53 0.58 0.57
Stall Speeds (in RPM ±100 rpm) 8000 SRM 1605
10
12. General
This manual covers the repair of the drive axle,
differential, and the wet disc brakes.
IDENTIFICATION PLATE
See Figure 1.
1. DANA PART NUMBER
2. DANA SERIAL NUMBER
3. HYSTER PART NUMBER
4. AXLE OVERALL RATIO
Figure 1. Identification Plate
Drive Axle Removal
WARNING
When putting the lift truck on blocks, make sure
the surface is solid, even, and level. Any blocks
used to support the lift truck must be solid, one-
piece units.
1. Put blocks on each side (front and back) of the
steering tires to prevent movement of the lift
truck.
2. Raise the lift truck and put blocks under the
frame so that the drive wheels do not touch the
floor. Put blocks under the counterweight for
stability.
3. Remove the mast assembly as described in the
section Mast Repairs (S/N A513, A514, A613,
A614, A702, A703, A704, A705, A706, A707,
A751, A752, B513, B514, B586, B587, B588,
B589, B590, B591, B749, B750, B751, B752,
B753, B754) 4000SRM1250.
WARNING
On lift trucks with pneumatic tires, completely re-
move air from tires before removing them from lift
truck. Air pressure in tires can cause tire and rim
parts to explode, which can cause serious injury
or death. Never loosen nuts that hold together in-
ner and outer wheel halves when there is air pres-
sure in tire.
4. Remove the wheels.
5. Remove the planetary carrier housing fill/level
plugs on both sides of the drive axle.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
6. Remove the center section fill/level plug.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
1400 SRM 1246 General
1
13. See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005,U005)
7. Remove the planetary carrier housing drain
plugs on both sides of the drive axle to drain
the oil from the planetary carrier housings into
a suitable container.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
8. Remove the center section drain plug to drain
the oil from the center section into a suitable
container.
See Figure 2 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 3 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
A. REAR VIEW SHOWN
B. FRONT VIEW SHOWN
1. PLANETARY CARRIER HOUSING FILL/LEVEL
PLUGS
2. PLANETARY CARRIER HOUSING DRAIN
PLUGS
3. CENTER SECTION DRAIN PLUG
4. CENTER SECTION FILL/LEVEL PLUG
5. PLANETARY CARRIER HOUSING (RH)
6. PLANETARY CARRIER HOUSING (LH)
7. CENTER SECTION
Figure 2. Drive Axle Drain and Fill/Level Plugs for
Lift Truck Models S4.0, 4.5, 5.5FT, S5.5FTS, (S80,
100, 120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
Drive Axle Removal 1400 SRM 1246
2
14. A. REAR VIEW SHOWN
B. FRONT VIEW SHOWN
1. PLANETARY CARRIER HOUSING FILL/LEVEL
PLUGS
2. PLANETARY CARRIER HOUSING DRAIN
PLUGS
3. CENTER SECTION FILL/LEVEL PLUG
4. CENTER SECTION DRAIN PLUG
5. PLANETARY CARRIER HOUSING (RH)
6. PLANETARY CARRIER HOUSING (LH)
7. CENTER SECTION
Figure 3. Drive Axle Drain and Fill/Level Plugs for
Lift Truck Models H4.0FT5/FT6; H4.5FTS5,
H4.5FT6; H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
9. Remove the parking brake cables. Refer to the
following section for removal procedures:
See Brake System 1800SRM1247 for lift truck
models
• S4.0, 4.5, 5.5FT, S5.5FTS, (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004)
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6;
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005)
See Wet Brakes - NMHG 1800SRM1597 for lift
truck models
• S4.0, 4.5, 5.5FT, S5.5FTS, (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (J004)
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6;
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(U005)
10. Remove the capscrews retaining the line guards
and remove the line guards on both sides of the
drive axle.
See Figure 4 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 5 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
11. Disconnect the brake cooling lines from both
sides of the drive axle.
See Figure 4 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 5 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
12. Disconnect the brake lines from both sides of
the drive axle.
See Figure 4 for lift truck models
• S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS;
S120FTPRS) (G004, H004, J004)
See Figure 5 for lift truck models
• H4.0FT5/FT6; H4.5FTS5, H4.5FT6,
H5.0-5.5FT (H80, 90, 100, 110, 120FT)
(N005, P005, R005, S005, U005)
1400 SRM 1246 Drive Axle Removal
3
15. 1. BRAKE COOLING LINE (LEFT SIDE)
2. HOSE CLAMP
3. HOSE CLAMP
4. BRAKE COOLING LINE (RIGHT SIDE)
5. BRAKE LINE (RIGHT SIDE)
6. LINE GUARD (RIGHT SIDE)
7. CAPSCREW
8. COOLING RETURN HOSES
9. CAPSCREW
10. LINE GUARD (LEFT SIDE)
11. BRAKE LINE (LEFT SIDE)
Figure 4. Brake Cooling Lines and Brake Lines, Lift Truck Model S4.0, 4.5, 5.5FT, S5.5FTS (S80, 100,
120FT; S80, 100FTBCS; S120FTS; S120FTPRS) (G004, H004, J004)
Drive Axle Removal 1400 SRM 1246
4
16. 1. BRAKE COOLING LINE (LEFT SIDE)
2. HOSE CLAMP
3. BRAKE COOLING LINE (RIGHT SIDE)
4. BRAKE LINE (RIGHT SIDE)
5. BRAKE LINE (LEFT SIDE)
6. COOLING RETURN HOSES
7. BRAKE LINE SUPPLY LINE
Figure 5. Brake Cooling Lines and Brake Lines, Lift Truck Model H4.0FT5/FT6; H4.5FTS5, H4.5FT6;
H5.0-5.5FT (H80, 90, 100, 110, 120FT) (N005, P005, R005, S005, U005)
1400 SRM 1246 Drive Axle Removal
5
17. 13. Disconnect the cooling return hoses from the
drive axle. See Figure 6.
14. Place blocks under the axle assembly and con-
nect slings and lifting device.
15. Place blocks under the transmission to support
the transmission while removing the drive axle.
16. Remove the capscrews holding the drive shaft
and remove the drive shaft.
A. DRIVE AXLE COOLING HOSE RETURN TO TRANSMISSION SUMP
1. HOSE CLAMP
2. COOLING RETURN HOSE, RIGHT SIDE
3. COOLING RETURN HOSE, LEFT SIDE
Figure 6. Drive Axle Cooling Return Hoses
Drive Axle Removal 1400 SRM 1246
6
18. 17. Remove the transmission isolator mounting
bolt located on top of the assembly. See Fig-
ure 7.
Figure 7. Transmission to Differential Mounting
Bolt
Legend for Figure 7
1. ISOLATORS
2. WASHER
3. WASHER
4. CAPSCREW
5. TRANSMISSION
6. DRIVE AXLE
18. Remove the four mounting capscrews and
washers from the drive axle. See Figure 8.
19. Remove blocks and lower the drive axle assem-
bly. Pull axle forward and away from frame.
20. Place blocks under the differential assembly.
1. CAPSCREW
2. WASHER
3. DRIVE AXLE
Figure 8. Drive Axle Mounting Capscrews
1400 SRM 1246 Drive Axle Removal
7
19. Hub Seal Replacement
1. SEAL
2. EXTERNAL BEARING
3. HUB
4. WASHER
5. RING NUT
6. SAFETY FLANGE
7. SOCKET HEAD SCREW
8. COVER
Figure 9. Hub Seal Replacement
Drive Axle Removal 1400 SRM 1246
8
20. REMOVE
Refer to Figure 9.
STEP 1.
Remove the cover from the hub.
1. COVER
STEP 2.
Mark the position of the ring nut.
Remove the socket head screw and the safety flange
from the ring nut.
1. SOCKET HEAD SCREW
2. SAFETY FLANGE
1400 SRM 1246 Hub Seal Replacement
9
21. STEP 3.
Using special tool T1, loosen the ring nut.
1. SPECIAL TOOL T1
STEP 4.
Remove the ring nut and washer.
1. RING NUT
2. WASHER
STEP 5.
Using a puller, loosen the hub assembly.
1. HUB ASSEMBLY
Hub Seal Replacement 1400 SRM 1246
10
22. STEP 6.
By hand, finish removing the hub assembly.
1. HUB ASSEMBLY
NOTE: It may be necessary to use a puller to remove the external bearing.
STEP 7.
Remove the external bearing.
1. EXTERNAL BEARING
STEP 8.
Remove the seal from the hub.
1. SEAL
1400 SRM 1246 Hub Seal Replacement
11
23. INSTALL
Refer to Figure 9.
CAUTION
Make sure the seal is positioned correctly in the
hub or damage may occur.
STEP 1.
Position the seal in the hub.
1. SEAL
2. HUB
CAUTION
When installing the sealing ring, make sure to
maintain the predefined distance of 21.4 to
21.8 mm (0.842 to 0.858 in.) for pneumatic lift
trucks, and 8.9 to 9.1 mm (0.350 to 0.358 in.) for
cushion lift trucks. Refer to STEP 3.
STEP 2.
Position the special tool T2 for cushion lift trucks
or special tool T3 for pneumatic lift trucks on the
seal and press the seal into the hub.
NOTE: SPECIAL TOOL T2 SHOWN. SPECIAL
TOOL T3 IS SIMILAR.
1. SPECIAL TOOL T2
Hub Seal Replacement 1400 SRM 1246
12
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. STEP 3.
Verify the depth of the seal is correct. 8.9 to
9.1 mm (0.350 to 0.358 in.) for cushion lift trucks,
and 21.4 to 21.8 mm (0.842 to 0.858 in.) for pneu-
matic lift trucks.
Check the flatness of the seal.
NOTE: CUSHION LIFT TRUCK SHOWN.
NOTE: PNEUMATIC LIFT TRUCK SHOWN.
1400 SRM 1246 Hub Seal Replacement
13
26. WARNING
Hot parts. Wear protective clothing and gloves to
prevent burns.
STEP 4.
Install the external bearing. If necessary, use a
suitable drift pin to prevent damage.
Alternatively, heat the bearing to 100°C (212°F).
1. EXTERNAL BEARING
STEP 5.
Install the hub assembly.
1. HUB ASSEMBLY
STEP 6.
Install the washer.
Apply Loctite®
242 to the arm thread and manually
thread the ring nut onto the arm thread.
1. APPLY LOCTITE®
242
2. WASHER
3. RING NUT
Hub Seal Replacement 1400 SRM 1246
14
27. STEP 7.
Lock the wheel hub in position with a lever.
Tighten the ring nut as follows:
a. Using special tool T1, tighten ring nut to
237 N•m (175 lbf ft).
b. Rotate hub 2 to 3 revolutions in both direc-
tions.
c. Using special tool T1, tighten ring nut to
406 N•m (300 lbf ft).
d. Rotate hub 2 to 3 revolutions in both direc-
tions. 1. SPECIAL TOOL T1
STEP 8.
Tighten the ring nut to 500 to 600 N•m (369 to
443 lbf ft).
NOTE: It may be necessary to move ring nut in the tightening direction to allow alignment of the safety
flange to socket head screw hole.
STEP 9.
Apply Loctite®
242 to the threads of the socket
head screw. Place the safety flange in position and
install the socket head screw into one of the three
holes.
1. SOCKET HEAD SCREW
2. SAFETY FLANGE
1400 SRM 1246 Hub Seal Replacement
15