This document is the user manual for the SA-2005 Series Electrical Safety Analyzer. It describes the features and operation of the analyzer including its display, control keys, test receptacles, connectors, and self-test functionality. The analyzer allows testing of electrical safety parameters for medical devices and comes in standard and international models for use around the world.
Catalog thiết bị đóng cắt Fuji Electric - 03 - Control Relays & Timer
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Công ty cổ phần Hạo Phương xin gửi đến Quý Khách hàng bộ catalog các dòng Contactor Fuji Electric mới nhất 2019 bao gồm: contactor SK, contactor SC, contactor FJ.
Contactor (Khởi động từ) Fuji Electric là dòng sản phẩm thuộc nhóm thiết bị đóng ngắt mạch điện. Các sản phẩm Fuji hiện đang được phân phối bởi Công ty Hạo Phương, nhà phân phối thiết bị điện và là nhà tích hợp hệ thống hàng đầu Việt Nam.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY TNHH HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
PT. Siwali Swantika merupakan distributor resmi Fluke di Indonesia. Selain penjualan alat ukur Fluke, perusahaan kami juga menyediakan jasa kalibrasi dan jasa perbaikan untuk alat ukur Fluke. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Catalog thiết bị đóng cắt Fuji Electric - 02- Manual Motor Starter
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
S&C Vista SD Underground Distribution Switchgear Outdoor Distribution (17.5 kV and 29 kV) With Visi-Gap Load-Interrupter Switches and Visi-Gap Fault Interrupters - Vault Installation Style
Catalog thiết bị đóng cắt Fuji Electric - 03 - Control Relays & Timer
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Công ty cổ phần Hạo Phương xin gửi đến Quý Khách hàng bộ catalog các dòng Contactor Fuji Electric mới nhất 2019 bao gồm: contactor SK, contactor SC, contactor FJ.
Contactor (Khởi động từ) Fuji Electric là dòng sản phẩm thuộc nhóm thiết bị đóng ngắt mạch điện. Các sản phẩm Fuji hiện đang được phân phối bởi Công ty Hạo Phương, nhà phân phối thiết bị điện và là nhà tích hợp hệ thống hàng đầu Việt Nam.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY TNHH HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
PT. Siwali Swantika merupakan distributor resmi Fluke di Indonesia. Selain penjualan alat ukur Fluke, perusahaan kami juga menyediakan jasa kalibrasi dan jasa perbaikan untuk alat ukur Fluke. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Catalog thiết bị đóng cắt Fuji Electric - 02- Manual Motor Starter
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
S&C Vista SD Underground Distribution Switchgear Outdoor Distribution (17.5 kV and 29 kV) With Visi-Gap Load-Interrupter Switches and Visi-Gap Fault Interrupters - Vault Installation Style
S&C Vista SD Underground Distribution Switchgear Outdoor Distribution (17.5 kV and 29 kV) With Visi-Gap Load-Interrupter Switches and Visi-Gap Fault Interrupters - Pad-Mounted Installation Style
Catalog thiết bị đóng cắt Fuji Electric - 12 - VCB & VMC
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Mini-Contactors and Thermal Overload Relays - SK Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ACB dòng DW đến từ thương hiệu Fuji Electric.
Sản phẩm dễ dàng lắp đặt, đi kèm với thiết kế thân thiện với người dùng và môi trường.
Catalog thiết bị đóng cắt Fuji Electric - 08 - Circuit Protector
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - 11 - Power Fuses, VT & CT
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
DPBH series miniature circuit breaker has characteristic of small size ,light weight ,novel
structure and excellent performance ,They are mounted in the illuminating distribution board
and used in guesthouse, block of flats ,high buildings, squares, airports, rail way
station ,plants and enterprises etc, in ACcircuits220 V(single pole)up to 415V(3 pole)50Hz for
protection of overload short circuit and for circuit change‐over in lighting system ,Braking
capacity is 3KA.
The reliable identification of low combustion oxygen in a red heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety.
Low emission burners and aggressive ring control points to achieve increased efficiency and emission reductions have driven the industry to tighter control measures. But tighter control measures also hold a greater potential for combustion damage. Reducing the risk of a combustion event has become a priority and has led to the implementation of Safety Instrumented Systems (SIS). This additional layer of safety is added to the Basic Process Control System.
S&C Vista SD Underground Distribution Switchgear Outdoor Distribution (17.5 kV and 29 kV) With Visi-Gap Load-Interrupter Switches and Visi-Gap Fault Interrupters - Pad-Mounted Installation Style
Catalog thiết bị đóng cắt Fuji Electric - 12 - VCB & VMC
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Mini-Contactors and Thermal Overload Relays - SK Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ACB dòng DW đến từ thương hiệu Fuji Electric.
Sản phẩm dễ dàng lắp đặt, đi kèm với thiết kế thân thiện với người dùng và môi trường.
Catalog thiết bị đóng cắt Fuji Electric - 08 - Circuit Protector
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - 11 - Power Fuses, VT & CT
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
DPBH series miniature circuit breaker has characteristic of small size ,light weight ,novel
structure and excellent performance ,They are mounted in the illuminating distribution board
and used in guesthouse, block of flats ,high buildings, squares, airports, rail way
station ,plants and enterprises etc, in ACcircuits220 V(single pole)up to 415V(3 pole)50Hz for
protection of overload short circuit and for circuit change‐over in lighting system ,Braking
capacity is 3KA.
The reliable identification of low combustion oxygen in a red heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety.
Low emission burners and aggressive ring control points to achieve increased efficiency and emission reductions have driven the industry to tighter control measures. But tighter control measures also hold a greater potential for combustion damage. Reducing the risk of a combustion event has become a priority and has led to the implementation of Safety Instrumented Systems (SIS). This additional layer of safety is added to the Basic Process Control System.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
Catalog MCCB & ACB Fuji Electric dòng G-TWIN Mới Nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng Catalog MCCB & ACB Fuji Electric Mới Nhất (2019) gồm
MCCB (Molded case circuit breakers ) dòng G-TWIN
ACB (Air circuit breakers) dòng DH
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-catalogue-mccb-fuji
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-catalogue-mccb-fuji dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-cataloguemccbfuji-160413042900Thuan Kieu
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcb dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog ELCB Fuji dòng G-TWIN mới nhất (2019) đầy đủ thông tin thông số kỹ thuật, kích thước, khối lượng...
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Catalog thiết bị đóng cắt Fuji Electric - 06 - MCCB & ACB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalogue mitsubishi thiet bi dien acb dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Underground Cable Accessories
Elastimold® offers the industry's most complete package for managing underground cable connections.
Broad Product Range..
Elastimold accessories, available from 5kV to 138kV, connect, ground, splice, terminate and protect underground cable.
Elastimold Innovation
Elastimold’s long, innovative history includes pioneering such products as extended and repair elbows, jacket seal elbows, and shrink-fit joints.
Fuji thiet bi dien-elcbfuji-160413044256Thuan Kieu
Fuji thiet bi dien-elcbfuji-160413044256
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-elcbfuji-160413044256 dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Dòng sản phẩm với lợi thế được thiết kế với kích thước nhỏ gọn nên thiết bị được sử dụng rất rộng rãi trong hệ thống điều khiển công nghiệp. Với những tính năng được cải tiến và được tích hợp sẵn giúp cho thiết bị có thể phát huy tối đa được hiệu suất làm việc mang đến sự hài lòng, đồng thời tạo niềm tin cho người dùng.
Catalog thiết bị đóng cắt Fuji Electric - 01 - Contactor
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Similar to Hay tbptatd - sa2005 safety analyzer (20)
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
3. i
WARNINGS, CAUTIONS, NOTICES ............................................................................ ii
DESCRIPTION............................................................................................................. 1
LAYOUT....................................................................................................................... 4
TESTING........................................................................................................................ 9
COMMUNICATION PROTOCOL ................................................................................ 14
MANUAL REVISIONS.................................................................................................. 16
LIMITED WARRANTY.................................................................................................. 16
SPECIFICATIONS ....................................................................................................... 17
NOTES......................................................................................................................... 20
BC BIOMEDICAL
SA-2005 SERIES
TABLE OF CONTENTS
This User Manual covers the following units:
SA-2005 & SA-2005-R
SA-2005-INTL & SA-2005-INTL-R
SA-2005-AUS & SA-2005-AUS-R
4. ii
WARNING - USE
The SA-2005 is intended for testing only and
should never be used in diagnostics, treatment
or any other capacity where they would come in
contact with a patient.
WARNING - LIQUIDS
Do not submerge or spill liquids on the SA-2005.
In the event of a spill onto the SA-2005, Do not
operate the SA-2005 regardless of fluid type.
WARNING - MODIFICATIONS
The SA-2005 is intended for use within the
published specifications. Any application
beyond these specifications or any unauthorized
user modifications may result in hazards or
improper operation.
WARNING - CONNECTIONS
All connections to patients must be removed
before connecting the DUT to the SA-2005. A
serious hazard may occur if the patient is
connected when testing with the SA-2005. Do
not connect any leads from the patient directly to
the SA-2005 or DUT while it is powered by the
SA-2005.
WARNING - CLEANING
Disconnect Line Power to the SA-2005 before
attempting to clean it. Do not immerse. The SA-
2005 should be cleaned by wiping gently with a
damp, lint-free cloth. A mild detergent can be
used if desired.
5. iii
CAUTION - SERVICE
The SA-2005 is intended to be serviced only by
authorized service personnel. Troubleshooting
and service procedures should only be
performed by qualified technical personnel.
CAUTION - ENVIRONMENT
Exposure to environmental conditions outside
the specifications can adversely affect the
performance of the SA-2005. Allow SA-2005 to
acclimate to specified conditions for at least 30
minutes before attempting to operate it.
CAUTION - INSPECTION
The SA-2005 should be inspected before each
use for obvious signs of abuse or wear. The SA-
2005 should not be used and should be serviced
if any parts are in question.
CAUTION - USAGE
The SA-2005 is not a continuous duty device, it
is intended for short duration testing within the
current limits and duty periods specified. Do not
leave the DUT connected to the SA-2005 for
extended time periods.
Do not to drop the SA-2005.
WARNING - VOLTAGE
When the SA-2005 is in Lead Isolation mode and
the ISO key is depressed, 110% of line voltage is
applied to the Patient lead connectors and/or
External test leads. Although this voltage is
applied through an internal current limiting
resistance of 121 kΩ (per standard test
specifications), Do not touch the test leads,
connections or DUT while the ISO key is
depressed.
7. v
NOTICE – SYMBOLS
Symbol Description
Caution
(Consult Manual for Further Information)
Electrical Caution
(Consult Manual for Further Information)
Per European Council Directive 2002/95/EC,
do not dispose of this product as unsorted
municipal waste.
NOTICE – ABBREVIATIONS
Amp Ampere(s)
AAMI
Association for the Advancement of
Medical Instrumentation
C Celsius
cm centimeter(s)
° degree(s)
DUT Device Under Test
Euro European
ft feet
FS Full Scale
Hz hertz
IEC International Electrotechnical Commission
ISO Isolation
kg kilogram(s)
kHz kilohertz
kΩ kilohm(s)
LED Light Emitting Diode
MAP Mains on Applied Parts
MHz Megahertz
µA microampere(s)
mA milliampere(s)
mm millimeter(s)
NEMA
National Electrical Manufacturers
Association
Ω Ohm(s)
PC Personal Computer
Lbs pounds
RH Relative Humidity
RMS Root Mean Square
USA United States of America
V Volt(s)
VA Volt-Ampere(s)
VAC Volt(s) Alternating Current
W Watt(s)
9. 1
The Model SA-2005 Series is a Microprocessor based Electrical Safety Analyzer. It
allows for a multitude of tests to be performed on a device using the same unit and lead
connections. The following are highlights of some of the main features:
SA-2005:
LED STATUS INDICATORS
AUDIO FEEDBACK
TOUCH CONTROL KEYS – NO KNOBS
5 UNIVERSAL PATIENT LEAD INPUTS
HIGH IMPACT PLASTIC CASE
LINE VOLTAGE MEASUREMENT
DEVICE UNDER TEST CURRENT MEASUREMENT
EARTH / GROUND LEAD RESISTANCE
EARTH / GROUND LEAKAGE CURRENT
ENCLOSURE / CHASSIS LEAKAGE CURRENT
EXTERNAL RESISTANCE
EXTERNAL LEAKAGE CURRENT
SOURCE WIRING INTEGRITY MONITOR
TRUE RMS MEASUREMENTS
AAMI ES1-1993 or IEC 601 SELECTABLE TEST LOADS
90 TO 264 VAC OPERATION
20 AMP RATING (SA-2005 and SA-2005-INTL Models)
10 AMP RATING (SA-2005-AUS Models)
SELF TEST POINTS
EXTERNALLY REPLACEABLE GROUND FUSE
AUTOMATIC LOAD REVERSAL DELAY
PATIENT LEAD TO LEAD LEAKAGE CURRENT
PATIENT LEAD TO EARTH / GROUND LEAKAGE CURRENT
PATIENT ISOLATION LEAKAGE CURRENT
EXTERNAL ISOLATION LEAKAGE CURRENT
BC BIOMEDICAL
SA-2005 SERIES
ELECTRICAL SAFETY ANALYZER
10. 2
AVAILABLE MODELS:
SA-2005 – STANDARD MODEL WITH HOSPITAL-GRADE NEMA 5-15P LINE
PLUG AND HOSPITAL-GRADE NEMA 5-20R DUT TEST RECEPTACLE FOR
USE IN THE US AND OTHER COMPATIBLE COUNTRIES
SA-2005-INTL – INTERNATIONAL MODEL, IEC C20 RECEPTACLE PIGTAIL
(MUST USE COUNTRY-SPECIFIC LINE CORD – SEE ACCESSORIES
SECTION) AND UNIVERSAL DUT TEST RECEPTACLE THAT WORKS WITH
THE FOLLOWING COUNTRY-SPECIFIC PLUGS:
o NEMA 5-15P, NEMA 5-20P, NEMA 6-15P and NEMA 6-20P (US/NORTH
AMERICA)
o UK1-13P and UK3-5P (UK)
o SW1-10P (SWITZERLAND)
o IT1-10P (ITALY)
o IS1-16P (ISRAEL)
o JA1-15P (JAPAN)
o EU1-16P (EURO) CEE 7/7 “SCHUKO” (NOTE: MUST USE SCHUKO
GROUNDING ADAPTER TO PERFORM LEAKAGE MEASUREMENTS,
SEE OPTIONAL ACCESSORIES SECTION)
o DE1-13P (DENMARK) (NOTE: NO EARTH/GROUND PIN, THEREFORE
LEAKAGE MEASUREMENTS NOT APPLICABLE)
o EUROPLUG CEE 7/16 (NOTE: NO EARTH/GROUND PIN, THEREFORE
LEAKAGE MEASUREMENTS NOT APPLICABLE)
SA-2005-AUS – AUSTRALIAN MODEL, AU1-10P LINE PLUG AND AU1-10R
DUT TEST RECEPTACLE FOR USE IN AUSTRALIA/NEW ZEALAND AND
OTHER COMPATIBLE COUNTRIES
OPTIONS
-R ADDS RS-232 SERIAL COMMUNICATIONS
AVAILABLE MODELS:
o SA-2005-R
o SA-2005-INTL-R
o SA-2005-AUS-R
STANDARD ACCESSORIES
BC20-20110 8 FT CHASSIS TEST LEAD (BLACK)
BC20-30107 SOFT CARRYING CASE
UF-0250-01 REPLACEMENT GROUND LEG FUSE
BC20-204XX (SA-2005-INTL ONLY) – REFER TO PAGE 8
OPTIONAL ACCESSORIES
BC20-20111 8 FT EXTERNAL TEST LEAD (RED)
BC20-20112 16 FT CHASSIS TEST LEAD (BLACK)
BC20-20113 16 FT EXTERNAL TEST LEAD (RED)
11. 3
BC20-20200 REPLACEMENT SA-2005-INTL DUT INTERNATIONAL
RECEPTACLE ADAPTER
BC20-20221 SCHUKO GROUNDING ADAPTER
BC20-41337 RS-232 COMMUNICATIONS CABLE (DB-9M to DB-9F)
BC20-41339 USB TO RS-232 ADAPTER
CS-2000-U 1 AMP CURRENT SOURCE - USA/NORTH AMERICA
CS-2000-E 1 AMP CURRENT SOURCE - EURO (SCHUKO)
SA-2005-INTL LINE CORDS: (REFER TO PAGE 8 FOR DETAILS)
BC20-20400 NEMA 5-20P PLUG LINE CORD (USA/NORTH AMERICA)
BC20-20401 JA1-15P PLUG LINE CORD (JAPAN)
BC20-20402 UK1-13P PLUG LINE CORD (UK)
BC20-20403 CEE 7/7 “SCHUKO” PLUG LINE CORD (EURO)
NOTE: INCLUDES BC20-20221 GROUNDING ADAPTER
BC20-20409 BSS546A PLUG LINE CORD (INDIA/SOUTH AFRICA)
BC20-20410 SW1-10P PLUG LINE CORD (SWITZERLAND)
BC20-20412 IT1-10P PLUG LINE CORD (ITALY)
BC20-20416 AUSTRALIA PLUG LINE CORD
12. 4
This section looks at the layouts of the SA-2005 Models and gives descriptions of the
elements that are present.
For all models, the user controls all Analyzer functions via light touch keys. There is an
audio click when any key is depressed, while a “Razz” or error tone consisting of a rapid
succession of beeps is sounded if an invalid key is depressed. Analyzer modes and
status are indicated by 29 LEDs as well as 3 Neon lamps. A 3-1/2 digit LCD display
conveys DUT test results to the user.
SA-2005 Layout (SA-2005-R shown)
LAYOUT
RS-232 Communication Port
(Note: Only with Option –R)
3-1/2 digit LCD
Display
ISO Test key
& indicator
Load Selection
switch:
AAMI, IEC
NEMA 5-20R
Receptacle for
DUT
Analyzer Mode keys &
indicators:
Mains Voltage
Device (DUT) Current
Earth Resistance
Earth/Ground Leakage
Enclosure Leakage
Lead to Earth Leakage
Lead to Lead Leakage
Lead Isolation Leakage
External Leakage
LCD Unit Indicators:
Volts
Amps
µAmps
Ohms
5 Universal Patient Lead Inputs
Chassis Connector
Patient Lead
Selection keys &
indicators:
Analyzer Receptacle Control
keys & indicators:
Hot
Neutral
Ground
Polarity
Earth/Ground
Fuse
Test Snaps:
100 uA
1.0 Ω
External Lead
Connector
3 Neon indicators for
Incoming Power status
13. 5
SA-2005-INTL Layout SA-2005-AUS Layout
(SA-2005-INTL-R shown)
The SA-2005-INTL and SA-2005-AUS Model Layouts are shown above, note that the
only differences from the standard model are the Line cords and the DUT test
Receptacles.
Note: The RS-232 connector isn’t shown for the SA-2005-AUS above, but is an
available option (see previous section).
Universal International
Receptacle for DUT
Australian Receptacle
for DUT
14. 6
Display
The main information in the system is presented in the 3-1/2 digit LCD display. This
data is provided as simple meter readings with the measurement units indicated to the
right by one of four LED indicators.
Function Selection
Nine LEDs and two keys make up the Function Selection Section. The keys are up and
down arrows. When depressed, they step the Analyzer through the available options.
The LED next to the currently selected option is illuminated.
Load Selection
The unit may either use the AAMI ES1-1993 or IEC 601 Test load for measurements.
This is selected by the Load Selection switch.
Analyzer Test Receptacle Control
There are four keys and 8 LEDs in the Analyzer Test Receptacle Control Section. They
allow the manual control of the power connections that are made to the DUT. Internally,
a series of relays are switched by the microprocessor based on the keys that are
depressed. The LEDs indicate the current state of the power connections to the
Receptacle.
Note: The Forward/Reverse Polarity key has a safety delay feature, preventing damage
to the internal relays and the DUT. When the key is depressed, the DUT power is
disabled and the safety delay is activated. When this delay is complete, the internal
relays switch the polarity to the DUT and apply power. This delay allows any reactive
power stored in the DUT to self-discharge before the polarity is reversed.
Note: The unit will power up with the Neutral and Ground Closed, in Forward Polarity
and with the Hot Open. It is recommended that the unit be returned to this condition
when plugging and unplugging the DUT.
Patient Lead Control
There are five patient leads. During testing, it is necessary to select between these
leads, select all of them and apply High Voltage to them. This section provides the
control keys to do these test configurations and the LEDs to indicate the current state.
There is one LED and an internal relay for each lead. The LEDs and the markings
below each LED indicate when that relay is on, thus selecting the indicated lead. The
Up and Down arrow keys sequentially select each lead in order and scroll through from
None, to 1-5 to All and around again.
To apply High Voltage to the leads, the “ISO” Test key is depressed. It is only active in
the Lead Isolation mode. It is a momentary key so that High Voltage is only applied
while the key is held down.
15. 7
Power Outlet Indicators
Three Neon indicators help verify the polarity and wiring of the wall receptacle that the
Safety Analyzer is plugged into.
Self-Test Snaps
There are two snaps on the side of the unit that allow for a quick self-test of the
Analyzer. They provide a fixed 1.0 Ohm resistance to Earth/Ground and a 100 µAmp
leakage current source to Earth/Ground when the Chassis lead is applied and the
Analyzer set to the proper mode.
Connectors
There are two connectors for test cables on the unit. One is for the Chassis lead and
the other is for one of two different leads used for external testing. The test cables
simply plug into the sockets. There is a release pin on the cable plug that must be
depressed to remove the cable.
Fuse
There is a fuse in the ground leg of the Analyzer Test Receptacle. This is to help
prevent damage from excess ground current. It is located on the face for ease of
replacement.
Test Receptacle
This receptacle is for the connection of the DUT. The Receptacle Rating depends on
the specific Analyzer model. SA-2005 models use a Hospital Grade North
American/USA standard NEMA 5-20R receptacle rated 20 Amps @ 125 VAC. SA-
2005-INTL models use a universal international receptacle rated 20 Amps @ 250 VAC.
SA-2005-AUS models use an Australian-specific AU1-10R receptacle rated 10 Amps @
240 VAC. An external patch cord may be necessary to connect devices utilizing
different types of plugs to the Analyzer receptacle.
Power Cord
The Power Cord, which is connected internally, provides power to both the Safety
Analyzer and the DUT through the Test Receptacle. The Power Cord varies depending
on the Analyzer model. SA-2005 models use a NEMA 5-15P plug designed to plug into
a NEMA 5-15R or 5-20R Receptacle. SA-2005-INTL models have a short IEC C20 plug
for which a country-specific adapter cable must be connected – See the following
section for this information. SA-2005-AUS models use an Australian AU1-10P plug
intended for operation with Australian and New Zealand AU1-10R Receptacles.
16. 8
Communications (Optional)
On Analyzer models with the –R option, a DB-9 RS-232 Communications port is
provided to interface the analyzer with a PC. Data from the Analyzer display may be
transferred over this communications link as well as full control over all analyzer
functions and settings. For further details, see the Communication Protocol section.
Adapter Cable with Standard
Product Plug and Required
International Connector
(See Options Below)
Universal Power Cord which
Connects to Standard Product
Plug
17. 9
The SA-2005 Models allow the user a great deal of flexibility in testing. Any of the basic
tests can be run and in almost any sequence. The information in this section presents a
systematic approach that is just one way to proceed. It is only presented as a guide
and it is the responsibility of the user to establish which tests are required.
The Analyzer requires a good Earth/Ground connection for operation. It should be
plugged into a “Hospital Grade” receptacle where available. This is necessary for both
valid test results and personal safety.
Power Receptacle Confirmation
Once plugged in, the first step is to ensure that the wall receptacle the Safety Analyzer
is plugged into is wired properly (120 VAC Non-Isolated Power Systems Only). There
are three neon indicators in the unit that provide this confirmation. The REV indicator is
red and the other two are green. If the two green indicators are on, the receptacle is
wired correctly. If not, utilize the following patterns to help determine the problem. Do
not proceed with any testing until you get only the two green lights.
NOTE: Neutral/Ground Reversal is not checked.
NOTE: These Indicators are valid only for 120 VAC Non-Isolated Power Systems.
Mains Voltage
With the Mains Voltage function selected, the display will show the Voltage that is
present on the incoming power lines. This is measured from Line to Neutral. Note that
the voltage may drop when the DUT is turned on. Ensure that this value is within the
DUT specifications.
TESTING
NOTICE – PERFORMING TESTS
REFER TO DUT MANUFACTURER’S SERVICE MANUAL FOR
TEST PROCEDURES AND MEASUREMENT LIMITS.
18. 10
Device Current
With the Device Current function selected, the display will show the current draw of the
DUT. The Receptacle should be configured with HOT-CLOSED, NEUTRAL-CLOSED,
GROUND-CLOSED and POLARITY-FWD. Refer to the Specifications section for
current capacity and permitted duty cycle for this test mode.
Earth Resistance
With the Earth Resistance function selected, the display will show the resistance
between the Chassis Test lead and Receptacle Earth/Ground. This resistance is a
combination of the resistance within the DUT enclosure and the resistance of the
Earth/Ground Lead in the DUT power cord.
NOTE: This test has no meaning for equipment that does not use a grounded cord.
The test requires that the Chassis Test lead be plugged into the Chassis Connector.
The other end should be connected to a solid ground point on the DUT.
The display is in hundredths of Ω and will read to 19.99 Ω. Over-range shows as
“1_ _ _”.
Earth/Ground Leakage Current
With the Earth/Ground Leakage function selected and the Ground-Open, the display will
show the leakage current in the ground wire of the DUT.
NOTE: This test has no meaning for equipment that does not use a grounded cord.
Selecting this function automatically opens the connection to Earth/Ground and passes
any leakage current through a 1000 Ω load with either AAMI ES1-1993 or IEC 601
frequency compensation as selected by the Load Selection switch.
Enclosure Leakage
With the Enclosure function selected, the display will show the leakage current between
the Enclosure (Chassis) and Earth/Ground.
The test requires that the Chassis Test lead be plugged into the Chassis Connector.
The other end should be connected to a solid ground point on the DUT.
NOTE: If a non-conductive enclosure is used, a 200 cm2
conductive foil pad should be
used. This foil is to be placed in close contact with the enclosure and connected to the
Chassis Test lead.
Any leakage current will flow through the Chassis Test lead and then through a 1000 Ω
load with either AAMI ES1-1993 or IEC 601 frequency compensation as selected by the
Load Selection switch.
19. 11
Lead to Earth/Ground Leakage
With the Lead to Earth/Ground function selected, the display will show the leakage
current between the selected lead and Earth/Ground.
Attach the patient leads to the connectors on the top of the Safety Analyzer. The Up
and Down arrow keys may then be used to select any individual lead or all of the leads.
This test should be done for each lead individually and all leads together.
This test measures the leakage current that would flow through the leads if the patient
were to come into contact with Earth/Ground.
Lead to Lead Leakage
With the Lead to Lead function selected, the display will show the leakage current
between the selected Patient Lead and all other patient leads.
Attach the patient leads to the connectors on the top of the Safety Analyzer. The Up
and Down arrow keys may then be used to select any individual lead. Internally, relays
connect the leads as necessary. The LEDs indicate the selected lead.
This test should be done for each lead individually.
This test measures the current that would flow from a lead to other leads. Normally
these are Auxiliary currents from bias, measurement and sensing circuits.
Lead Isolation
With the Lead Isolation function selected and the “ISO” Test key depressed, the display
will show the leakage current between the selected Patient Lead(s) and Earth/Ground.
Attach the patient leads to the connectors on the top of the Safety Analyzer. The Up
and Down arrow keys may then be used to select any individual lead and all of the
leads.
WARNING
The SA-2005 applies 110% of line voltage to the
Patient leads or External test leads during the
Isolation test. Although this is current limited by
a 121 kΩ internal resistor, per standard test
specifications, care should be taken to prevent
contact with this voltage. Do not touch the test
leads, connections or DUT while depressing the
Isolation Test key.
20. 12
As each lead and then All leads are selected, depress and hold the “ISO” Test key.
This will apply 110% of the line voltage through a 121 kΩ resistor to the selected lead(s)
and measure the current that flows to Earth/Ground through a 1000 Ω load with either
AAMI ES1-1993 or IEC 601 frequency compensation as selected by the Load Selection
switch.
This test is to be done for each lead individually and All leads together.
This test measures the leakage current that would flow through the lead(s) if the patient
were to come into contact with Line voltage. This is referred to as MAP (MAINS on
Applied Parts).
Point to Point Measurements
The unit has the ability to measure Leakage Current, Isolation Leakage Current and
Resistance between two points, utilizing two test leads. These tests are separated
because they use a slightly different setup than the previous tests.
Point to Point Leakage Current
With the External function selected, the display will show the leakage current between
the test leads.
The test requires that the Chassis Test lead be plugged into the Chassis Connector and
the External Test lead be plugged into the External Connector. The other ends of the
leads are then attached to the points of interest.
Any current flowing between the test points is passed through a 1000 Ω load with either
AAMI ES1-1993 or IEC 601 frequency compensation as selected by the Load Selection
switch.
Point to Point Isolation Leakage Current
With the External function selected and the “ISO” Test key depressed, the display will
show the isolation leakage current between the test leads.
WARNING
The SA-2005 applies 110% of line voltage to the
Patient leads or External test leads during the
Isolation test. Although this is current limited by
a 121 kΩ internal resistor, per standard test
specifications, care should be taken to prevent
contact with this voltage. Do not touch the test
leads, connections or DUT while depressing the
Isolation Test key.
21. 13
The test requires that the Chassis Test lead be plugged into the Chassis Connector and
the External Test lead be plugged into the External Connector. The other ends of the
leads are then attached to the points of interest.
Depress and hold the Isolation Voltage key. This will apply 110% of the line voltage
through a 121 kΩ resistor to the test leads and measure the current that flows through a
1000 Ω load with either AAMI ES1-1993 or IEC 601 frequency compensation as
selected by the Load Selection switch.
Point to Point Resistance
With the Earth Resistance function selected, the display will show the resistance
between the two test leads.
The test requires two Chassis Test leads, one in the Chassis Connector and the second
in the External Connector. The opposite cable ends should be connected to the points
of interest.
NOTE: Remove any device plugged into the Analyzer Test Receptacle. If there is a DC
voltage present between the two test points, the reading may contain an error. This can
be checked by reversing the connections. If the readings differ, average the two to get
the actual resistance value.
22. 14
The communication protocol provides a means to completely configure and use the
Analyzer from a PC or other device with RS-232 communications interface. This
provides for hands free or automated operation of the equipment.
Communication Port
The Serial port is configured as 115,200 Baud Rate, 8 Data Bits, 1 Stop Bit, and No
Parity.
Command Syntax
The command description is broken into columns; the KEYWORD, the NODE and the
VALUE.
The KEYWORD provides the name of the command. The actual name of the command
consists of one or more keywords since SCPI commands are based on a hierarchical
structure, also known as a tree system.
In such a system, associated commands are grouped together under a common node in
the hierarchy, analogous to the way leaves at a same level are connected at a common
branch. This and similar branches are connected to fewer and thicker branches, until
they meet at the root of the tree. The closer to the root, the higher a node is considered
in the hierarchy. To activate a particular command, the full path to it must be specified.
This path is represented in the following tables by placing the highest node in the left-
most position. Further nodes are indented one position to the right, below the parent
node.
The highest level node of a command is called the Keyword, followed by the Node, and
then the value.
Some commands allow for reading and writing data and some commands are Read
Only. To indicate a read function, a question mark (?) is placed at the end of the
command path. For example, to change the mode to Earth Resistance measurement,
“CONFigure:MODE ERESistance<cr>”, where <cr> indicates a carriage-return. To read
the current operating mode of the device, a mode read command would be
“CONFigure:MODE?<cr>”, which would return the current operating mode of the device.
Lowercase letters indicate the long-form of the command (for example,
CONFigure:MODE MVOLtage) and can be omitted for simplification. Uppercase
letters indicate the abbreviated, or short-form, of the commands and must be included
(for example, CONF:MODE MVOL).
All commands sent to the unit are terminated with a Carriage Return.
NOTE: Commands can be entered in either upper or lowercase or a mixture of the two,
COMMUNICATION PROTOCOL
23. 15
uppercase and lowercase. Commands sent to the device are not case sensitive. Upper
case characters in the command summary table below are used to show the shortened
versions of the commands if available.
SA-2005-R Communication Command Summary
Keyword Node Value Description
CONFigure MODE MVOLtage
DCURrent
ERESistance
EGROund
ENCLosure
LEARth
LLEAd
LISOlation
EXTernal
Mains Voltage
Device Current
Earth Resistance
Earth / Ground Leakage
Enclosure Leakage
Lead to Earth Leakage
Lead to Lead Leakage
Lead Isolation
External Measurement
LEADSelect NONe
n (1 to 5)
ALL
No Leads Selected
n Lead only
All Leads Active
HOT OPEN
CLOSed
Receptacle Hot Lead Open
Receptacle Hot Lead Closed
NEUtral OPEN
CLOSed
Receptacle Neutral Lead Open
Receptacle Neutral Lead Closed
GROUnd OPEN
CLOSed
Receptacle Ground Lead Open
Receptacle Ground Lead Closed
POLarity
FWD
REV
Receptacle Polarity Forward
Receptacle Polarity Reversed (reverse
HOT/NEUTRAL)
ISO ON
OFF
Isolation Test ON
Isolation Test OFF
FILter AAMI
IEC
Set AAMI test load
Set IEC test load
SYSTem
UNITs?
Returns the units of Measure (Volts, Amps, uA, Ohms)
[Read Only]
MEASurement? Returns the latest measurement [Read Only]
KEY MUP Changes Mode Up one position
MDN Changes Mode Down one position
LECW
Changes Output / Lead Select Clockwise
one position
LECCW
Changes Output / Lead Select Counter-
Clockwise one position
HOT Duplicates the HOT key press
NEUtral Duplicates the Neutral Key press
GROUnd Duplicates the Ground key press
POLarity Duplicates the Polarity key press
ISO Duplicates the ISO Test key press
MODel? Returns Safety Analyzer Model [Read Only]
VERsion? Returns Firmware Version [Read Only]
24. 16
Revision # Revisions Made
Rev 01 Origination
P:MANUALSBCGroup…SA2005_Series_UM_Rev01.docx
LIMITED WARRANTY
WARRANTY: BC GROUP INTERNATIONAL, INC. WARRANTS ITS NEW PRODUCTS TO BE
FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP UNDER THE SERVICE FOR
WHICH THEY ARE INTENDED. THIS WARRANTY IS EFFECTIVE FOR TWELVE MONTHS FROM
THE DATE OF SHIPMENT.
EXCLUSIONS: THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
BC GROUP INTERNATIONAL, INC. IS NOT LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
NO PERSON OTHER THAN AN OFFICER IS AUTHORIZED TO GIVE ANY OTHER WARRANTY
OR ASSUME ANY LIABILITY.
REMEDIES: THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY SHALL BE: (1) THE REPAIR
OR REPLACEMENT OF DEFECTIVE PARTS OR PRODUCTS, WITHOUT CHARGE. (2) AT THE
OPTION OF BC GROUP INTERNATIONAL, INC., THE REFUND OF THE PURCHASE PRICE.
MANUAL REVISIONS
25. 17
MAINS VOLTAGE
RANGE 90 to 264 VAC, 50/60 Hz
ACCURACY ± 3% of Reading, ± 1 digit
DEVICE CURRENT
RANGE 0 to 19.99 Amps, RMS
ACCURACY ± 5% of Reading, ± 1 digit
EARTH RESISTANCE
RANGE 0 to 19.99 Ω
ACCURACY
0 to 1.99 Ω ± 1% Range
2.00 to 19.99 Ω ± 1% Range
CURRENT SOURCE
10 mA
(Note: 1 Amp Current Source Available as an optional
accessory, see description section for ordering
information on the CS-2000 Series)
LEAKAGE CURRENT
RANGE 0 to 1999 µA, RMS
ACCURACY
DC ± 1% Reading, ±1 digit
25 Hz up to 1 kHz ± 1% Reading, ±1 digit
1 kHz up to 100 kHz ± 2.5% Reading, ±1 digit
100 kHz to 1 MHz ± 5% Reading, ± 1 digit
LEAKAGE LOAD
1000 Ω
AAMI ES1-1993 or IEC 601
User Selectable
LEAD ISOLATION TEST
(MAP)
110% Line Voltage, ± 5%
Internally Current-Limited by 121 kΩ resistor
FUSE
250 mA, 250 V, 5x20 mm, Fast Acting
(Receptacle Ground Leg)
BC Part No. UF-0250-01
SPECIFICATIONS
26. 18
ELECTRICAL
OPERATING LINE
VOLTAGE
90 to 264 VAC, 50/60 Hz
LINE PLUG
SA-2005 MODELS NEMA 5-15P
SA-2005-INTL MODELS
Universal IEC C20
Receptacle Pigtail Cord
Must use Country-specific
Line Cord (see
Accessories section)
SA-2005-AUS MODELS AU1-10P (AS/NZS 3112)
DUT CURRENT CAPACITY
SA-2005 & SA-2005-INTL
MODELS
15 Amps, 30 minutes
20 Amps, 5 minutes
SA-2005-AUS MODELS 10 Amps, 30 minutes
DUT RECEPTACLE
SA-2005 MODELS
20 Amps @ 125 VAC
Capacity
Hospital Grade
NEMA 5-20R
Compatible with:
NEMA 5-15P and 5-20P
Plugs
SA-2005-INTL MODELS
20 Amps @ 250 VAC
Capacity
International Receptacle
Compatible with:
o NEMA 5-15P, NEMA
5-20P, NEMA 6-15P
and NEMA 6-20P
(US/NORTH
AMERICA)
o UK1-13P and UK3-5P
(UK)
o SW1-10P
(SWITZERLAND)
o IT1-10P (ITALY)
o IS1-16P (ISRAEL)
o JA1-15P (JAPAN)
27. 19
ELECTRICAL (continued)
DUT RECEPTACLE
(continued)
SA-2005-INTL MODELS
o EU1-16P (EURO)
CEE 7/7 “SCHUKO”
(NOTE: MUST USE
BC20-20221
GROUNDING
ADAPTER)
o DE1-13P
(DENMARK)
o EUROPLUG
CEE 7/16
SA-2005-AUS MODELS
10 Amps @ 240 VAC
Capacity
AU1-10R (AS/NZS 3112)
Compatible with:
AU1-10P Plugs
POWER CONSUMPTION 5 VA (5 W)
PHYSICAL & ENVIRONMENTAL
DISPLAY
Non-Backlit 3½ Digit LCD
0.5 inches (12.7 mm) Digit Height
CONSTRUCTION
ENCLOSURE ABS Plastic
OVERLAY Back-printed Lexan
SIZE 8.65 x 5.73 x 2.40 Inches (219.7 x 145.5 x 61.0 mm)
WEIGHT ≤ 3.0 Lbs (1.36 kg)
OPERATING RANGE
15 to 40 °C (59 to 104 °F)
10 to 90% RH, Non-Condensing
STORAGE RANGE -20 to 65 °C (-4 to 149 °F)